Windows 7 invites you to re-enable them if you have any malware or virus on PC?

Similar Questions

• My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader. Do you have any suggestions?

  My computer windows 8 HP Pavillion M8100n does not recognize the DVD drive or the SD card reader.  I have just upgraded to Windows 8 of Window Vista. Do you have any suggestions?

  Hello

  I see nothing unusual, except that there should be a "0001", or even "0002"...

  When you have made the registry change, you used the command line (Admin)?... the process may not work with the regular command prompt...

  Also, try to go to Device Manager, right click on your DVD drive, click on uninstall and restart.

• Due to a slow internet connection, I tried to download my purchased software several times with no success. Then, I continued receives the following message: "TOO_MANY_DL_ATTEMPTS if you have any questions, please contact Digital River Customer Service."

  Due to a slow internet connection, I tried to download my purchase

  software several times without success. Then, I continued to receive the

  following message appears:

  
  

  'TOO_MANY_DL_ATTEMPTS '.

  
  

  If you have any questions, please contact Digital River Customer Service

  to [email protected]. »

  I contacted them and they said I need to contact Adobe.

  no idea how to fix?

  Thank you very much.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • Premiere Elements: 14, 13, 12, 11, 10: 9, 8, 7
  • Photoshop Elements: 10, 12, 14, 11, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

• you have any free softwear for uitilys or pc tune up

  you have any free softwear for uitilys or pc tune up

  See if something is there that helps: -.

  http://www.ComputerActive.co.UK/CA/PC-help/2101102/free-Microsoft-Windows-tools

  If we please vote as helpful.

  Thank you.

• CS6 bridge, at startup, is unable to read the hidden. I have purged the central cache, but the question remains. Do you have any suggestions?

  I have purged the central cache, but the question remains. Do you have any suggestions?

  Himarkp

  Greetings!

  Please follow the steps below according to your operating system.

  Windows: -.

  • Navigate to C:\Users\Username\AppData\Roaming\Adobe\Bridge Cs6
  • Rename the folder Cache Cache.Old

  MAC: -.

  • Exit the bridge
  • Go to the library to the user: (~/Library indicates your user library. Hold down the option key and click on the "Go" menu in the Finder bar. The option key will reveal your user library.)
  • then navigate to user (your user name) / library / caches / Adobe / Bridge Cs6. here are a plug-in and and folder called cache.
  • Put the two items in the Recycle Bin and restart Bridge. Deleted files will be replaced by new and empty files.

  Let us know if this helps

  Concerning

  ~ Assani

• How can I fix it? "Money cannot connect to the store purchases.   If you have any firewall software, make sure it has been set to allow communication on port 443.

  This message p [ops upward when I run iTunes]

  Money cannot connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  How can I fix it?

  me too... same problem... just started

  iTunes can't connect to the store purchases.

  If you have any firewall software, make sure it has been set to allow communication on port 443.

  MacBook Pro, osx el cap 10.11.1, itunes 12.3.1.23

• "Edge Animate can't find a port and must get out."  Do you have any solutions?

  I can't start Edge, my error comes back: 'edge Animate failed to find a port and must leave. " Reinstallation does not work either.  You have any solutions?

  

  Thank you

  I don't know what it was, but defining the problem has been resolved by resetting the entire network

• If you have any with the itemrender have a control label and onther a gri data

  Hi friends,

  If you have any with the itemrender have a control label and onther a data grid control.

  In my application, I used list control. The list control's item converter. In my case if I click on the name list control, releated data corresponding to the data grid need to view and control the list as label.

  < mx:List width = "750" id = "Lst_userlist" verticalScrollPolicy = "off" horizontalScrollPolicy = "off" rowCount = "20".
  labelField = "sec_user_first_name + sec_user_last_name" labelFunction = "BindUserName" buttonMode = "true" itemClick = "Click_UserList (event)" > "
  
  < mx:itemRenderer >
  
  < fx:Component >
  
  < mx:VBox horizontalScrollPolicy = "off" verticalScrollPolicy = "off" >
  
  < s:Label id = name = "{data .sec_user_first_name + data .sec_user_last_name 'lbl_userhead'} ' buttonMode ="true"color =" #000000 "/ >" "

  < mx:DataGrid height = "100%" id = "membershipGrid" alternatingItemColors = "[#DCDCDC, F8F8FF #]" "5" paddingLeft = horizontalScrollPolicy = "off" color = 'black '.
  horizontalGridLines = "false" verticalScrollPolicy = 'auto' verticalGridLines = rowCount = "{membershipArrColl.length 'false'}" rowHeight = "25" "
  borderSkin = "{null}" showHeaders = 'true' borderVisible = "false" dataProvider = "{membershipArrColl}" width = "750" visible = "false" includeInLayout = "false" >
  
  < mx:columns >
  < mx:DataGridColumn width = "180" headerText = "Name" minWidth = "150" sortable = "true" wordWrap = "true" >
  < mx:itemRenderer >
  < fx:Component >
  < mx:HBox horizontalScrollPolicy = "off" >
  < fx:Script >
  <! [CDATA]
  override public function set data(value:Object):void {}
  Super.Data = value;
  
  if(Data.home_sec_organization_id==Data.sec_organization_id)
  {
  FileImg.Load ("/ist_shared/ist_images/ist_icons/Modern/gif/16/hot/user_favorites_16_hot.gi f");
  }
  on the other
  {
  FileImg.Load("/ist_shared/ist_images/ist_icons/Modern/gif/16/dis/user_remove_16_dis.gif");
  }
  lbl_Gridcloumn_name. Text = Data + .sec_user_first_name""+ data.sec_user_last_name;
  }
  
  []] >
  
  < / fx:Script >
  < mx:Image id = "fileimg" buttonMode = "true" toolTip = "This is organization at the home page of the user" / >
  < s:Label id = "lbl_Gridcloumn_name" width = "200" buttonMode = "true" textDecoration = "underline" toolTip = "User Menu [{data.sec_user_name}]" click = "outerDocument.Click_Name (event); »    / >
  
  < / mx:HBox >
  < / fx:Component >
  < / mx:itemRenderer >
  < / mx:DataGridColumn >
  < mx:DataGridColumn width = "120" minWidth = "110" headerText = "Username" sortable = "true" dataField = "sec_user_name" / >
  
  < mx:DataGridColumn width = "100" minWidth = "80" headerText = "OrgName" dataField = "sec_org_name" >
  
  < / mx:columns >
  
  < / mx:DataGrid >

  
  
  < / mx:VBox >
  < / fx:Component >
  
  < / mx:itemRenderer >
  < / mx:List >

  Please help a whole for me...

  Thank you

  Mamoudou R.

  If I understand correctly, you want to display a different set of data in a DataGrid control for each selected item in a list?

  I would just use link:

  This assumes that this list is filled with the data elements in a format similar to this:

  {

  label: "Label 1 list."

  data:]

  {col1: "col1", col2: "col2"},

  {col1: "col1", col2: "col2"},

  {col1: "col1", col2: "col2"}

  ]

  }

• How can you tell what windows operating system you have on your laptop? i.e. windows 7

  I where I look on my laptop and tells me what windows operating system i.e. windows 7

  Click on:

  Start-> Control Panel-> system

  When it tells you your version of Windows, edition, what service pack you have installed, and if your system type is 32-bit or 64-bit.

• Windows crashes when you use any application and stops in hibernation mode

  Hello people who might be able to help me,

  I come back from summer vacation and turned on my computer with windows 7 at first all seemed fine until I wanted to open an application. Opening was always very well, but when I did something on this subject, it crashed. Also my PC then stops in the hibernation mode. I can access internet, but nothing else. Then I tried to recover my PC. It turns out I have no recovery points and can only restore factory mode that sucks. Now that was new, since always, before I could restore my PC to a previous session without making any restore points. What can I do to restore my PC and ban these errors?

  Hello Nicolas,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1 did you receive no error message or code when the application or the system crashed?
  2. What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because settings to corrupt, or because of the presence of unused files in Windows. This can also occur due to the presence of any virus or malware.

  I appreciate the fact that you want to restore your computer. However, until you do, I suggest you to try the following methods and check if it helps.

  Method 1:
  Resolution of performance problems and check.
  Reference:
  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Please also run convenience store power.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Microsoft safety scanner run and check the issue.
  Reference:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• You have installed Malware &amp; Spyware on my computer - I WANT IT OFF!

  Your update disabled all of my web browsers... I have this problem as soon as possible.

  Adobe is not at fault here:

  If you go to the page you linked to and WATCH VERY CAREFULLY address where these downloads came (www.123mplayer.com), you will see that the infested downloads toolbar you have installed CAME NOT FROM ADOBE. You probably can't find them in this EXACT address, but one of the sites a lot, a lot, of many other "fake put up-to-date" there.

  You have that? 123mplayer.com (or anywhere where you got this update false) is where all your repressed anger needs to be done, because ILS gave you what you downloaded and you don't get it here. 123mplayer.com IS NOT a site of Adobe or even affiliated with Adobe. They you deceived download their junk, and you fell for it.
  I want to apologize for that, but it wasn't my fault, and it wasn't for lack of Adobe.
  Because of Adobe Flash Player, but they do not run Internet and they cannot and is not 100% total control on who does what with their Flash Player. They make agressivley continue illegal distributions, but there isn't ANY WAY could never possibly control of any business of more than 16 billion Web sites.

  It is a hard fix for you, I don't know, but I hope that you have learned the lesson that is: only download updates from ANYWHERE but the developer of. This applies to ANY software, whether Flash Player, Windows or other.

• Error iTunes - iTunes could not connect to the store purchases - if you have any firewall software, make sure it has been set to allow communication on port 443.

  My itunes has been fine. All of a sudden today it now gives me this error: error Itunes - iTunes could not connect to the store purchases - if you have a software firewall, make sure that it has been set to allow communication on port 443.

  I do not have my firewall active. I connected to itunes, quit itunes, reconnected - still a problem.

  Was there an update and now it's a bug? Help!

  Thank you!

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Is Shockwave or Flash plug ok now? If this is not the case, do you have any suggestions to use?

  I deleted Flash yesterday 07/14 since its been blocked. I read today, it's ok; It redownloaded as flash, but it is loaded as the shock wave in the plug-ins. It's ok or if they only went for a quick?

  If adobe flash is not good, you have a suggestions what to use for games and movies?

  Depending on where you look at it can always be called Shockwave Flash Player, not to be confused with the little used nowadays Shockwave Player (for Director).

  If you have Flash Player 18.0.0.209 then you are aware that Adobe has published early Tuesday.

  http://www.Adobe.com/software/Flash/about/
  https://www.Adobe.com/products/flashplayer/distribution3.html

• HP spectrum XT Ultrabook 13-2003tu you have any problem in the material?

  It is always closed, and I don't know why? I troubleshooting and can't find anything.

  And he also has this problem. How can I solve this problem?

  
  

   

  Hi MouseHunter,

  I understand that you have a problem with HP spectrum XT Ultrabook 13-2003tu. The best thing to do is a system restore. You can restore to the last time where he worked.

  http://support.HP.com/us-en/document/c01835735

  Here is a document on overheating. Overheating could cause the computer to stay close.

  http://support.HP.com/us-en/document/c01657439

  I hope this helps.

  Thank you.

• Windows 8, that you have not permission to save in this location

  I have seen many answers to this question, but all were dealing with earlier versions of Windows, so I was reluctant to apply the any suggestions. I read "Windows 8 for Dummies" and still can not find an answer to my problem here either.

  I bought a new computer running W8 and Mozy backup to restore my files online. They were all restored to the new computer in C:/Users/username/my documents and my desktop computer.

  I had 31GB of data, which includes photos, documents, spreadsheets, etc. Any item I open and edit, then try to save, I get this error message: you are not allowed to save in this location

  Any suggestions?

  Kind regards

  Bob

  In fact... This seems to be a simple matter of some of the files 'user' 'read-only '.

  I had this same question - and rather than security of facility access for "Everyone" read/write/delete, etc... I simply took the 'read only' attribute out of the areas that I wanted to join that were safe.

  Not having not problems with the combos "window + Key".  They seem clear enough to me.  But that's another debate.

  Summary:

  1. Navigate to the directory above the one you are having issues with that.  (For example, to remove the limitations on your desktop - access c:\users\.  Then you'll see "Desktop" listed.)
  2. Right-click on the directory wanted to "unlock".  (In the example I used in #1, 'Office' is what I want to unlock).
  3. Select 'Properties', and then clear the attribute "read only".
  4. Click on 'Ok' - and if necessary, tell it to apply to all files, folders, and subfolders.  (This is supposed to be the case if you do that here.  Otherwise, you go to specific files and folders and unlock them).

  Voila!  I have regained access to files and folders.

  Now... Why this happened in the first place, I'm not sure.  It's for someone smarter than me to report for us all.  But that did the trick without any changes to security settings (finally...) Parameters of safety 'Read only' TRUE... of course IF a security "attribute").

  Hope this helped...