Manufacturing of electrifying M my main device

Similar Questions

• Is it possible to sync only bookmarks in one device, for example and all the other stuff between other devices?

  Hello.

  I have 3 devices. 2 of them are at work, so I don't want to sync items such as extensions (xnotifier, for example, is to synchronize my CPA), passwords for my PC at home with these two devices. But I want to synchronize my bookmarks and other things. Is it possible to separate between different devices sync settings?

  Thank you.

  You may need to use two separate sync accounts, if this is not possible with a single account.
  As you cannot use both accounts at the same time on a device, you will need to disconnect the computer which is the main device and (temporarily) connect to another account only synchronize to the other account to sync bookmarks.

• HDX 16 t 1200: upgrade Windows 10: Base system device

  Hello

  First of all, let me say that the upgrade of Windows 10 (I did a clean install) seems to work fine on my HDX 16.

  I have a few device drivers, I and Microsoft cannot understand. When I make upward device under other devices Manager, I have:

  >? Another device

  - ?! System device base (calling it a 1)

  - ?! (2) base system device

  - ?! Device base system (3)

  - ?! Unknown device (4)

  Properties:

  1 device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 1. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Events-info: device PCI\VEN_197B & DEV_2382 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 01E4 requires installation.

  2. Device Type: other devices; Manufacturer: Unknown; Location: Bus PCI 6, device 0, function 4. Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Events-info: device PCI\VEN_197B & DEV_2384 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 04E4 requires installation. (the only difference is location and event-Info)

  3 bus PCI 6, device 0, function 3

  Events-info: device PCI\VEN_197B & DEV_2383 & SUBSYS_361B103C & REV_00\4 & 3ae12ecb & 0 & 03E4 requires installation.

  4 device Type: other devices; Manufacturer: Unknown; Location: On system compatible ACPI Microsoft; Device status: the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information.

  Details-value: ACPI\HPQ0004\2 & DABA3FF & 1

  Events-info: device ACPI\HPQ0004\2 & daba3ff & 1 requires installation.

  I found similar problems of pilot in the forum on other HP laptops, but nothing on my HDX 16 t 1200.

  Thanks in advance for any help.

  Hello:

  You need these drivers...

  Base system devices:

  This package contains the driver for laptop models JMicron card reader supported and operating systems.

  File name: sp42446.exe

  Unknown device:

  This package provides the HP 3D DriveGuard for laptops software
  models that run an operating system supported. HP 3D DriveGuard protects the hard drive of "parking the heads ' if the cell phone is accidentally deleted or is suddenly hit by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• BlueScreen reads "stuck in an endless loop device driver.

  I have no knowledge of computers at all. I've had my laptop for about 18 months, I bought new online while living in London and he had this issue basically since the beginning, but I was a coward and didn't try to get it fixed on the warranty.

  She turns on and work for a random delay (sometimes 10 minutes and up to 2 hours) then all of a sudden the screen turns blue, and he reads a lot of numbers (I can get these and write them if necessary) and States "device driver stuck in a junkyard of endless memory loop beginning physics, manufacturer contact to update on the device...". »

  I have no idea what that means or what I need to do / who I should ask etc.
  Can someone tell me please?

  Hello!

  It's not easy to say what the problem is.

  First of all, what laptop do you have exactly?

  In your situation, I would first check the RAM. There are special tools and do always with Memtest86.
  You can download an ISO image to burn on a CD from [www.memtest86.com]
  Boot from the CD and test your memory RAM, maybe, you will get errors.

  You can also reinstall Windows with the recovery disk. It could be a software problem or driver.

  If you have any other questions, I'll try to help you.

  Good bye

• Rename a custom device

  Hi all

  I made a custom device that perform some operations with the associated DAQ card.

  In the Solution Explorer system Veristand, to manage several boards, it is possible to add multiple instances of it. The name of each instance must match the associated with a DAQ card, he is asked once and is never changes (in the camera custom XML file, I added the entry 'true').

  Demand for the name is made just after the addition of the instance in the tree Explorer (right click on the entry "Custom devices") system. In particular, the name is invited to call a VI that I put in the "Initialization.VI" of the library of device configuration custom. Unfortunately, this approach I am not able to change the name because ot the property of DisallowRenaming and an error is raised.

  How can I work around this problem? Is there an event as described in the "Custom Device" Guide (OnDelete, OnLoad,...) which can be pulled before the call of the "Initialization.VI", but after the addition of the instance in the system Explorer tree?

  Thank you

  aRCo

  I recommend to remove this label of your item custom main device. its best practice to rename the custom feature set.

  In addition, you can store the name of the physical device as a separate property rather than use the custom device node name.

  Finally, in 2012, we have added a "force rename" bool entry to the item to rename API to work around this problem.

• In Device Manager, OTHER DEVICES has yellow question mark

  I always have problems with sudden black screens with auto restart.  It has been suggested that I get a new video driver, so I went into Device Manager, and since there is no list for video devices, I looked in the other devices section (which has PCI Simple Communications Controller, SM Bus controller, video controller, and video controller - compatible VGA) there is a yellow question mark next to each one.  I opened each of them and read, "Unknown manufacturer", and "the drivers for this device are not installed (Code 28) ' how to find who is the manufacturer and model and the version?

  It might be true that it doesn't work with Windows 7, I never said it would work with Windows 7 (it's the XP forum, don't forget!) but there may be something similar.  Since WIndows 7 is so wunnerfool, they just left that have a completely since there must be no need for this.

  99% of the things on which I work is some flavor of Windows Server, XP or Citrix and haven't seen nobody wants to even consider moving their campus everything to Windows 7 and I do not see happening any time soon!  It is not in their plans at all.

  I support a handful of populous (just a few) who have systems that require Windows 7 for some features and other things though, but they are just itty bitty compared to the basic XP installed.

• device does not appear on the list of devices or parental control - model EA2700

  My son's iPod caused the parental conrols system crash. For some reason any his ipod has shown three times on the list of devices. So, I hit the 'X' on the list of devices when it has been disconnected to remove it from the list. Now, I can't it appears below the list of main devices or parental control. I can see the unit if I look under the DMZ/DHCP client table. I can even see it under the access as a guest, but it will not show upward under a regular connection, so I can't control it how do I get it to show up again?

  The ipod must log on again, then it should appear.

  I usually reserve an ip address for these devices in a dhcp reservation and give it a name in the reserve for the devices shows always like something that I can recognize because it can appear as just "peripheral network' for a name.

• Synaptic touchpad device does not. HP Pavilion dv 9500 windows vista Home premium.

  Optional update téléchargerais not automatic update of windows. went to manufacturing Web site to install the device driver. pop up of said necessary to restart to complete the installation. after reboot, touchpad does not. cannot connect to my profile to do anything. Help! PLEASE...

  Hello

  I suggest you do a system restore from a command prompt or from the Windows recovery environment. Check if you are able to connect. Follow step 1.

  Step 1:

  If it's been using, I suggest you to do a system restore.

  Repairs to the system of Windows Recovery Environment

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  Start the restore of the system from a command prompt

  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-System-Restore-from-a-command-prompt

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Home WINDOWS 7 premium (32B) for NOKIA N97mini Bluetooth device driver

  I m using hp pavilion dv3 with WINDOWS 7 home premium, I m unable to pair my NOKIA N97 mini via bluetooth.

  whenever it shows a n says error not found Bluetooth device driver. In total, four of these drivers are missing.

  Can you please help me, where to find these drivers

  Hello, NGO,

  I suggest you to follow the steps and check if it helps.

  Remove and then reinstall the device:

  a. click theStart button, select Control Panel, clickhardware and soundand then click Bluetooth devices.

  b. Select the device that is not working, and then clickRemove.

  c. click Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the boxmy device is set up and ready to be found and then clickNext.

  d. If the apparatus does not, repeat the previous step. When the device is found, select it, and then clickNext.

  e. follow the remaining instructions in the wizard.

  · Make sure that the device is on and that the batteries should be replaced.

  · Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  · Make sure that you have installed the device using the appropriate program. If this isn't the case, reinstall the device.

  For problems related to Bluetooth devices, see

  The problems with Bluetooth devices

• Resource monitor error "the device, mscank, reports"tv_ConfigMgrErr24"

  I get the error "the device, mscank, reports"tv_ConfigMgrErr24".» This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\LEGACY_MSCANK\0000. "This error is reported when the resource i run and performance monitor on my laptop. My config laptop is Sony Vaio win7 Home premium 64-bit. Kindly give me solution nd more of information for this problem. Full details of this error is:

  Symptom:	Device is not present, not working not properly, or does not all its drivers installed.
  Cause:	A device has a configuration issue preventing it from working correctly.
  Details:	The device, mscank, reports "tv_ConfigMgrErr24". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\LEGACY_MSCANK\0000.
  Resolution:	1. check that the correct driver is installed.
  	2. try updating the drivers using Windows Update.
  	3. check with the manufacturer for an updated driver.
  	4. try to uninstall and reinstall the device using Device Manager.

  Hi riteshwalia,

  Mscank is a file system driver that may be associated with any device.

  Device Manager open to check what hardware device is not working properly on the computer, and then uninstall it.

  (a) open Device Manager by clicking the Start button.

  (b) click on Control Panel, click system and security, and then, under System, click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) now check if any device has any yellow exclamation on it.

  Once you find any device with any brand, right click on the device and then click on the option to Uninstalland restart the computer and check if it works.

  If you can't find any device with all brands then check by activating hidden devices.

  (a) in Device Manager click on view and later click on Show hidden devices and check to see if you find any device with exclamation point and uninstall

  If the previous step fails, run Windows update to check and install the update from the recommended on the computer device driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If all steps above fail, then contact the manufacturer for updated driver for any device connected to the computer.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need drivers XP for Satellite Pro A40

  Just do a fresh install of XP on a Satellite Pro A40 of second hand. Various onboard devices are not known (of in XP Device Manager) and I can't go through the process of "Install new hardware" that I don't have the drivers. The devices are mainly the Multimedia Sound Audio Card and the PCI Modem. I don't know what manufacturer made these, as XP ID device as unknown Manager.

  Anyone have any ideas or tips on how I can get the sound and PCI modem to work?

  (I'm not using the laptop for this message, even if it has access to the Internet).

  Thank you

  Looking for XP drivers?

  You can find all the XP drivers on the European driver Toshiba page!

  For the multimedia and Audio sound card, you need to install the audio driver and Modem PCI-> modem driver.

  You will find everything on the page of the driver.

  But note that buddy, there are also a few QFE Ms. This is usual Microsoft patches and fixes that are necessary and essential for the installation of the driver.

  Also check the Microsoft Windows XP SP2 update information. Sometimes the only drivers or utilities must be updated after the installation of service packs for MS!

  Good bye

• Where update the drivers from?

  If you update drivers from your site to computer/laptop brands (for example Dell etc.)?  or get the new drivers from the manufacturer that make your drivers (drivers brand such killer Networking, NVIDIA etc.)?

  Hello

  Visit the site of the manufacturer of your system/motherboard first, then check the real device
  manufacturer sites an even newer version. BIOS, chipset and a few other proprietary drivers
  always be available on the website of the manufacturer of the motherboard of the system.

  -----------------------------------------------------------------------------------------

  Look for the updates with system Maker (manufacturer of motherboard for customized systems)
  BIOS, chipset of low level drivers, and device embedded and separate major
  drivers. DriverView execution - VIEW driver Microsoft set hide - updated from those who don't
  Dump on their behalf.

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double-click - driver
  tab - write version information. Now click on UPdate Driver (this cannot
  No matter what as MS is far behind the certification of drivers) - then do a right click - Uninstall.
  RESTART this will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and
  then device Maker (Realtek, Intel, Nvidia, ATI, for example) of the site and get their
  the most recent versions. (Look for BIOS, Chipset and software updates from the Maker system
  (website here).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat BTW to the manufacturers - manufacturers of devices DO WORK DO NOT THEIR SCANNER-
  Heck manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Win32.worm.Mabezat/I?

  I asked earlier a program that's in my startup services since I had found a couple of worms and never seen that in commissioning. However, I have Windows XP and I walked into a Forum of Vista. Excuse me, as not only am I new to this forum, I'm tired a frustrated.

  Can you now tell me what about Win32.Worm.Mabezat/I?

  Thank you for your patience.

  Hello

  Remove ALL power and reconnect the cables (at both ends where possible), memory and cards
  -in fact, remove and replace - do not just tight. Make sure that the vents are clear and fans
  will run.

  That does not sound like malware can update BIOS and chipset of low level
  drivers from the system manufacturer (manufacturer of motherboard for customized systems) and update all the
  main device drivers.

  Abandon the TuneUp utilities, which tend to be problematic if not powder Perlimpinpin - these type of on -.
  hype programs will cause more problems than they solve.

  ===============================================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• "display driver has stopped but has now been recovered.

  While watching the video clips my screen keeps stopping and starting and I get the above posting!  Someone knows what's the problem? - and how to fix it please

  Hello

  See this article which has a Fix - it:
  
  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
  http://support.Microsoft.com/kb/2665946

  Also with assistance from the manufacturer of your video cards and devices, check their online documentation and
  drivers and ask questions in the forums (if any) on known problems. You may need to update
  the video driver or re - install one even if it is more recent. It is sometimes necessary
  to return to a previous stable version.

  To install the video driver (if necessary)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AS ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My Toshiba Satellite is suddenly very slow to start.

  I had this problem last October and found a solution really simple online that worked perfectly, but I don't remember what I did!  It was very quick and easy, and according to me, it had to do with the deletion of something that has been fully in the registry... not the cache.  Someone has an idea?  I have no virus or spyware problems and my computer's hard drive has plenty of space and is regularly defragmented.

  Hello

  Check with Toshiba Support, their drivers and documentation online and ask
  in their forums on known issues with your model.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================================

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">