Windows 7 - Module stopped... - roaminggo.exe
I have a machine running windows 7 that works very well except watch an error at startup. A popup display "Module has stopped working" and in details, the problem event name is "CLR20r3" with a problem Signature 01 of 'roaminggo.exe '.
Everything seems to work properly, it's a shared PC, and no other users have reported problems apart from this. It's really just a minor annoyance now. I tried Google but came up with nothing. Advice on where to start would be useful!
Thank you
Kasey
roaminggo.exe, seems to be malicious associates. To ensure that your system is clean, and this file is not malware related, please run the malware scanners below the link.
TDSSKiller
http://Media.Kaspersky.com/Utilities/VirusUtilities/en/TDSSKiller.exe
Instructions to TDSSKiller
http://support.Kasper Sky.com/viruses/Disinfection/5350#block1
Download, install, and run a full scan with Malwarebytes (free version).
Malwarebytes.
https://www.Malwarebytes.org/antimalware/
Note: drops, the offer of "free trial" , just before launch Malwarebytes, if you tend to do, but remember, accepting the offer, launched the program in full mode and includes a real-time monitoring that may cause a conflict if you already have another product AV installed.
Delete all the objects found, restart and repeat, until there is no detection of fyrther.
Alternatively, to run ADWCleaner, for good measure.
ADWCleaner.
http://www.bleepingcomputer.com/download/adwcleaner/
Let us know the results after running the scans.
Tags: Windows
Similar Questions
-
"Windows install module stopped working and was closed".
I get this error message when I try to install the windows updates, or install. I am also unable to start the repair at the sfc prompt service. The windows defender service seem to be able to install updates, the update report.
Hello queenofthewest!
Please post on the Forums answer Ms.
Log in as administrator-
Start button | Control Panel | System and Maintenance | Administration tools
Double-click on Services
(Provide the administrator password or a confirmation if prompted to do so.)
Right click on the 'Windows Modules Installer' service, and then select Properties.
Select the general tab - make sure that the startup type is manual.
If it is already on the manual, follow this Microsoft KB article to reset Windows Update & then try to install Windows updates again.
How to reset the Windows Update components?
Click on the link above and follow the instructions, or on this page you will find Microsoft fix icon & you can use Alternatively.Hope this will help!
Enjoy Sunday!
Anurag Shukla
Microsoft Certified ProfessionalIf a post has solved your problem, be sure to mark it as a response and if there is a useful message, don't forget to vote as useful for helping others find easier solutions.
-
On my installation of Vista, all windows updates no longer work. If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs. At the same time, I get a message "Windows install Module has stopped working and closes". If you look in the services, it is crushed, but restarts. The update remains always hung. It doesn't matter what update I try and run, I always get the same result.
When the computer is shut down, it also tries to automatically install updates. These also hang on the first, which means that I have to force power off the computer.
Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message). When I restart in safe mode it tells me that I'm still on SP1. I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.
Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).
Any ideas? Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.
Hi AndrewInNZ,
Thanks for visiting the site of the community of Microsoft Windows!
I would like to ask you some questions for a better understanding of the issue:
(a) did you try to temporarily disable the security software and check if updates are smooth?
(b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
It is usually caused by a 3rd party firewall that it blocks the internal ports.
Check out WERCON for more information-
1) Click START | wercon.exe type in the search box start and click on enter.
(2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
Also reset the Firewall setting:
1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OKCheck the status of the service as well:
Log in as administrator-
Start button | Control Panel | System and Maintenance | Administration tools
Double-click on Services
(Provide the administrator password or a confirmation if prompted to do so.)
Right click on the 'Windows Modules Installer' service, and then select Properties.
Select the general tab - make sure that the startup type is manual
Here is the link to solve problems connecting to Windows Update or Microsoft Update
: http://support.microsoft.com/kb/818018/en-usIf you want to check the version of the service pack of the operating system:
Right-click on computer and select Properties.Hope this information helped!
Thank you, and in what concerns:
Aziz Nadeem - Microsoft technical support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think. -
Hello
In the home edition of Vista 32 IE 8 when I get the "search for files and folders:«Windows Explorer has stopped working...» "and in the watch box Details view:
Signature of the problem:
Problem event name: APPCRASH
Application name: Explorer.exe
Application version: 6.0.6002.18005
Application timestamp: 49e01da5
Fault Module name: btwapi.dll
Fault Module Version: 6.0.1.5500
Timestamp of Module error: 46df031a
Exception code: c0000005
Exception offset: b 0004, 091
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160I hope you can help me on this...
Thanks a lot guys.Hi PaulMazor,
Well first of all, btwapi.dll is a process no system developed by Bluetooth. If you go on your computer, try to disable Bluetooth by going to network and Internet or however your wireless interface is configured on your computer. If you don't have Bluetooth on your computer, try to uninstall it. go to start > Control Panel > programs > uninstall programs > scroll down and uninstall. My last suggesting opens upward, the Windows Task Manager (press ctrl + alt + delete and release). Go to processes and disable the application there. Other that that, I can't help you any further.Good luckDJ -
Svchost.exe application error, host process for Windows Services has stopped working
Original title: Svchost.exe application error [windows loses focus]
Every two minutes, windows 7 loses focus on the current window and I went in my event logs and found hundreds of errors of svchost.exe. Here's one of them:
Name of the failing application: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8eException code: 0xc00000fdOffset: 0x0000000000018e3dID of the process failed: 0x81cStart time of application vulnerabilities: 0x01cd7970b1953fa0The failing application path: C:\Windows\system32\svchost.exeThe failed module path: C:\Windows\SYSTEM32\ntdll.dllReport ID: efb97cea-e563-11e1-a232-002655497401The error message I receive after automatic power off repairs in the center of the Action is "host process for Windows Services has stopped working" and the process that opens after the loss of focus is Werfault.exe.Thank you for your time.Hello
1. when exactly do you get this error message?
2 have you made changes on the computer before this problem?
Method 1:
Step 1:
Try to start your computer in safe mode and check.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2:
If the problem does not occur in safe mode, perform the clean boot. Read the following article.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.Method 2:
Try to scan your computer with the Microsoft Safety Scanner and check.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.Method 3:
You try to perform the SFC (System File Checker) scan on your computer and check. Read the following article.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
It will be useful.
-
When my wife read his emails, the following error message is displayed before that windows live mail stops. Failed assertion. Program: c: Program Files | Windows Live\Mail\wlmail.exe File:C\boost_1_36_0\boost/shared_ptr.hpp line 419 Expression: px! = 0 someone at - it ideas?
original title: failure of the Assertion in windows Live MailAll Windows Mail issues belong to http://windowslivehelp.com/product.aspx?productid=15
-
Hello.
My laptop Vista SP2 does not have Windows updates due to the Windows Modules Installer (Trustedinstaller.exe) crashing:Error message:
"Signing of the problem:
Problem event name: APPCRASH
Application name: TrustedInstaller.exe
Application version: 6.0.6002.18005
Application timestamp: 49e01af1
Fault Module name: wcp.dll
Fault Module Version: 6.0.6002.18005
Timestamp of Module error: 49e0380e
Exception code: 80000003
Exception offset: 0013b 972
OS version: 6.0.6002.2.2.0.768.2
Locale ID: 2057
Additional information 1: fcbe
More information 2: 21dec0ca93c87c4af4036e2c4a4d224a
3 more information: 93a 4
"Additional information 4: 172cbe47bfd87945783d7b08d7f02897.Update history shows a number of updates that haved 'impossible' to install accordingly.
Any ideas how to solve this problem for all my PC install Windows updates pending?Thank you very much!
Hi Spoon579,
Jose is correct that we need more information. Without any information only generic suggestions that we can supply to run SFC/scannow here or CheckSUR here
-
6.4 Lightroom on my laptop Windows 10 abruptly stopped showing images developed in the modulel to develop. The photos are always present. When you use the split screen before and after, before it's normal and after shows a blue solid Panel. This is true for all images, old or new. I have reset all default settings without effect.
Uncheck the option preferences > performance > CPU graph use.
-
Desktop Window Manager has stopped working and was closed
One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.
I did some research on this and have already taken the following measures without a bit of luck:
1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.
2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.
3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.
4. the event viewer shows the following:
Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.
Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.
What should be my next course of action?
You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.
It's your specific error.
//
MessageId: STATUS_BREAKPOINT
//
MessageText:
//
EXCEPTION {}
Breakpoint
A breakpoint has been reached.
//
#define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winntProblem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.
So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).
Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.
Clean boot
Click Start - all programs - Accessories - run and typemsconfig
Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.
Tip clean bootIf the above does not help.
Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.
Reset. If this resolves your wake problem half of the items until you find the one that.
Safe mode
If the above does not help.
Click Start - all programs - Accessories - run and typemsconfig
Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode. -
Host process for Windows Services has stopped working
Signature of the problem:
Problem event name: APPCRASH
Application name: svchost.exe
Application version: 6.0.6001.18000
Application timestamp: 4a481bab
Fault Module name: svchost.exe
Fault Module Version: 6.0.6001.18000
Timestamp of Module error: 4a481bab
Exception code: c0000005
Exception offset: 000019f8
OS version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
Additional information 1: e3cf
More information 2: d42237859197873da486d40409b96ff9
Additional information 3: bf08
Additional information 4: 977fa141bb142a7ee87b31bf8afe4b66
When I try to check for solutions online, it does nothing.
Hello
Here are the generic blue screen technical try troubleshooting.
Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes something like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As exampes:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
information on all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.
You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-----------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1
Hello
My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,
It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.
Help, please!
DESKTOP WINDOW MANAGER HAS STOPPED WORKING
Windows can check online for a solution to the problem-> online and are looking for a solution (recommended)
-> closeAPPCRASH
Application name: Dwm.exe
Application version: 6.0.6002.18005
Application timestamp: 49e02696
Fault Module name: ntdll.dll
Fault Module Version: 6.0.6002.18327
Timestamp of Module error: 4cb74dd3
Exception code: 80000003
Exception offset: 0000000000045f00
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: 0fef
More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
Additional information 3: f196
Additional information 4: acf765d48a0657c8822f379a6b5f3b91Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Sorry to tell you,
I already solved the problem.
Just to let you know, I buy the product, because
I used the free and they don't really work (IN MY OPINION).
Anyone has this PROBLEM (appcrash)
Go to start
Click on Control Panel
go to appearance and personalization
Click on appearance color of windows.
then click on settings in the appearance of progress.
under the gaze of point for the theme of basic or something like that.
Want more info on Dwm.exe?
Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/
-
Whenever I log in I get an error message "Windows Update has stopped working".
original title: everytime I log in I get an error message "Windows Update has stopped working". I tried a manual update as well and it does not work.
In details, the error message is:
Signature of the problem:Problem event name: BEXApplication name: wuauclt.exeApplication version: 7.4.7600.226Application timestamp: 4a7b870bFault Module name: StackHash_6bc7Fault Module Version: 0.0.0.0Fault Module Timestamp: 00000000Exception offset: 00404968Exception code: c0000005Exception data: 00000008The system version: 6.0.6001.2.1.0.768.3Locale ID: 2057Additional information 1: 6bc7More information 2: f3f6a1403802118ada460cd45530935bInformation additional 3:6477Additional information 4: d34edb9b57aa7d1aac3252e1a9591198HiTunnywig,
(1) since when are you facing this problem?
(2) are - what you remember for change?
Wuauclt.exe rest reside in the background and checks the Microsoft Web site for updates to the operating system. Originally, wuauclt.exe is a legitimate system process, which is located in C:\Windows\System32, but there are cases where wuauclt.exe is actually a disguised virus, Trojan or worm.
Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Method 3: Run the fixit available in the article below to reset the Windows Update components
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in Windows -
Error message "Windows Explorer has stopped working"
I have windows vista home edition, I get the error message "Windows Explorer has stopped working"
I have two options, either to find a solution online and restart the program or restart the program. in all cases I restart Explorer and again get the error message, and then restart, etc...
The following are the details of the problem. I tried to remove all CMD services and reboot, but it did not help
Signature of the problem:
Problem event name: APPCRASH
Application name: explorer.exe
Application version: 6.0.6002.18005
Application timestamp: 49e01da5
Fault Module name: 2287.tmp
Fault Module Version: 4.80.0.0
Timestamp of Module error: 4c8c71fb
Exception code: c0000005
Exception offset: 000a7d70
OS version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160
Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
Problem event name: APPCRASH
Application name: explorer.exe
Application version: 6.0.6002.18005
Fault Module name: 2287.tmp
Fault Module Version: 4.80.0.0
Hello
Start Search ShellExView [1] for the 2287.tmp file and disable the entry.
André
[1] http://www.nirsoft.net/utils/shexview.html
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Can't open my pictures folder - message "windows Explorer has stopped working"!
I have a Toshiba Satellite A305 (Harman/Kardon) with Vista Home Premium, 32-bit operating system. For about a week now, I can not access my photos folder. When I try to open I get a message telling me that Windows Explorer has stopped working, then another telling me to restart.
I ran a full scan with my Norton program but no virus found. Following the suggestions made on this forum, I have disabled all non-Microsoft software but still getting the same message. Run the File System Check and after that 'complete 100% verification' I received a message that: "Windows resource protection found corrupt files but was unable to solve some of them."
What does that mean? How can I find out what files are corrupt? How can I fix it?He also said that the details are included in the CBS.log windir\logs\cbs\cbs.log journal
I tried to get more details of cbs.log (according to the directions on this site), but when I type the command I am told to type, nothing happens.
I don't know what else to try. Help!the problem report:-
Product
Windows Explorer
Problem
Stopped working
Date
28/08/2009-01:29
Status
Reported
Signature of the problem
Problem event name: APPCRASH
Application name: explorer.exe
Application version: 6.0.6001.18164
Application timestamp: 4907e242
Fault Module name: MSVCR80.dll
Fault Module Version: 8.0.50727.3053
Fault Module Timestamp: 4889d 619
Exception code: c0000005
Exception offset: 0001500a
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Information additional 01:40 d 4
More information 2: 4062ad41ec8067256aa4c5e2b56d3c79
Information additional 03:40 d 4
Additional information 4: 4062ad41ec8067256aa4c5e2b56d3c79
Same problem here. I found that I had some .mov files in the same directory of photos. Move the movie files solves the problem.
-
"Windows PowerShell has stopped working" error message popping up constantly
I get the error "Windows PowerShell has stopped working" message popping up constantly (several times per minute). This started after I restarted my laptop with nothing else running but the standard startup programs. How do I get this resolved?
The detail section of the problem shows the following:
Signature of the problem:
Problem event name: BEX
Application name: powershell.exe
Application version: 6.2.9200.16398
Application timestamp: 50338287
Fault Module name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 031cebc0
Exception code: c0000005
Exception data: 00000008
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txtHi Kumar,
Thanks for your reply. It was caused by Poweliks.
What I did: reset the IE security (version 11) by default; Download the updated version of free version of Malwarebyte s in SafeMode with network connection; restored the system to the point before that he has been infected with the Poweliks (I got lucky that point to restore was not removed by the system yet); then re scan the entire PC in mode safe mode with networking. So far, nearly a week, the PC works fine and the Poweliks wish never to return.
Thanks for all members of the community to help.
Happy new year to all!
-Kevin
Maybe you are looking for
-
Wanted: The Message Preview pane
MS Outlook has a preview pane of a message allowing you to display the first line of a message in the Inbox without opening it. It does not appear that Thunderbird has it. Is there an add-on that adds this functionality?
-
Satellite L500D - update BIOS, covered by warranty?
Hi, I bought a Satellite L500D in September of last year. The weekend comes, he suggested I should keep the machine etc. updated drivers so I logged on the Toshiba web site and there was a link with * New * Bios Update, i.e. After choosing the etc. g
-
I have change the drive of the HP DC5800 and I fress that new Windows XP SP2 instaled (from HP recovery) then after installs several programs When I try to copy a DVD with the program "NERO 7 ULTRA. When NERO ask to insert the ORIGINAL DVD... .i inse
-
Hi all I wanted to take over the existing application on the forum "Fact Serial Port operation," but I could not connect the two terminals of the VISA. the error message is 'you have connected two terminals of different types. can someone tell me how
-
Hello, I designed a vi which contains 5 led is placed at the centre of the façade that occupies the entire screen and 4 corners. However, this vi should be used on different systems, with different screen sizes. But on each screen, I'll need the size