Windows 7 on VMware Fusion

Similar Questions

• With leopard 10.6.8 running Windows XP on vmware fusion 3.0 NVIDIA problem

  Hi guys,.

  really impossible to install my NVIDIA graphics card, Windows XP with VMWare fusion.

  In the past it was ok, maybe it was the Snow Leopard update?

  Model ID: MacBook6, 1
  Processor name: Intel Core 2 Duo
  Processor speed: 2.26 GHz

  RAM: 4 GB

  I installed the bootcamp drivers

  I have re-installed VMWare tools

  Even the graphics card is not recognized, I can't install nvidia drivers (download them from the site Web of Nvidia again) and he is not able to play some video files widely.

  SH # "and I work with video and need to run some progs windows for it.

  Have you heard of this?

  Obrigado

  "In the past, it was ok.

  Huh?  The virtual machine will NEVER see the physical GPU to your host!  He will ALWAYS see the VMware SVGA II (or VMware SVGA 3D) video card.  You IMPOSSIBLE and WAS NEVER ABLE TO, install the video driver from your host on your comments.

• Using the stand-alone converter 5 with entry as local windows 7 in vmware fusion 4 output, the output is a folder with many files. How can I get this folder into a single file with the extension windows7.vmwarevm?

  I use standalone converter where I am converting my local windows 7 in vmware fusion 4 at the exit. When I made the migration wizard previously, I had an output of a windows7.vmwarevm file. However, when I made the converter, I had a folder called windows7. In this case, I had several files.

  Is there a way for me to convert all these files into one file, that is to say: windows7.vmwarevm? do I need to use the converter or other vmware tools?

  Welcome to the community,

  Please take a look at Re: how to convert a package/package of my folder on drive hard/vmware fusion? to see if that helps. This is a pretty old post, but I think that it is still valid.

  André

• Error Code 1606 when installing software on iMac running Windows 7 in VMWare Fusion

  I get this problem when you try to install 3rd party software: Error 1606: could not access network location \\vmware-host\Shared Folders\Pictures\

  I use Windows 7 installed as a virtual machine using VMWare Fusion v 3.

  Not sure if this is relevant - but when I open my computer, network location, 2 locations are shown: shared folders (\\.host) (y) and the files shared (\\.vmware-host) (z) -, which appear as disconnected network drives when you examine their properties.

  I hope you can help!

  Windows cannot access \\vmware-host\shared folders\desktop
  http://communities.VMware.com/message/1429202;JSESSIONID=76FEFD30AD5316F7F518CD6CBCEA3386

  Using folders shared
  http://www.VMware.com/support/WS4/doc/running_sharefold_ws.html

  Also try the Vmware forum.

  VMware Fusion® (for Mac)
  http://communities.VMware.com/community/VMTN/desktop/fusion;JSESSIONID=0E27C5D458C2F3B6185B0AB9BA13B55C

  http://www.google.com.au/search?hl=en&RLS=com.Microsoft%3Aen-au%3AIE-Address&q=%22%5C%5Cvmware-Host%5CShared+Folders%5C%22&btnG=Search&aq=f&aqi=G1&AQL=&OQ=&gs_rfai=

• 10 Easy Install Windows crashes with "VMware Fusion has encountered an error."

  When I tried to install Windows 10 Pro on VMware Fusion 8, easy installation process works normally for awhile then crashes with "VMware Fusion has encountered an error."

  I submitted a request for assistance, but other users have it met with the easy installation process?

  (Support information are attached.)

  -Douglas

  Hi Douglas,.

  It looks like a problem with your graphics driver or the graphics card:

  VMware.log said it was the SVGA thread that crashed:

  2015-09 - T 02, 07: 16:47 - 06:00 [+ 10.606] | SVGA | W115: Caught Signal 6 - tid 38927 (addr 7FFF914E9286)

  /var/log/system.log reveals that the pilot needed to restart the GPU seconds more host later:

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: GPU error detected!

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: call gpusKillClient for task 0xffffff80727586d0

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA (OpenGL): channel timeout!

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: Info channel: [0, 47 x 31, 0 x 14, 0x1ca5ef]

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: Version Info: [com.nvidia.web.GeForceWeb, v10.0.5 0x5e5f4c655b, 19862786, 346.02.03f01, 1]

  Many other people are also experiencing problems with Fusion 8 graphics cards and spare parts and/or the driver Nvidia on the web here: conflicts of Fusion 8.0 with Nvidia driver of web for Mac

  Workarounds for this thread: try disabling acceleration 3D for the virtual machine.  Try to uninstall the driver Nvidia of the web and win back the builtin driver OS X.  If you use a spare graphics card, try reinstalling the original.

  See you soon,.

  --

  Darius

• Put MacBook to sleep when you run Windows XP on vmware Fusion / screen when opened black top (waking from sleep)

  REF.: macbook 2.4 ghz, 4 GB of ram, osx 10.5.8, vmware fusion 2.0.5 running Windows XP sp3 with 2 GB of Ram assigned

  Could you get it someone please let me know what is the reason that every time vmware runs, and I close the lid of my laptop, each time I open the cover to get back to work, I get only a black screen.

  Should I be hitting the button suspend running vmware OS, before you close the lid of my computer and he get to sleep?

  Thank you for any advise you can provide.

  Kind regards

  Hello

  You can just put some time you're comfortable in these areas. It should not matter.

  I think it is it is happening is that your guest is going to suspend - not the vmware suspend, but WinXP suspend mode - and that's for a reason any does not cover.

  If my suggestions do not help, you can also try to re - install VMware tools, but take a snapshot before that, just in case

  --

  Wil

  _____________________________________________________

  VI-box tools & scripts wiki at http://www.vi-toolkit.com

• Webcam not recognized in Windows XP with VMware Fusion

  I use VMware Fusion 2.0 on a Macbook Pro with Windows XP.  I've been using Yahoo Messenger with the iSight webcam and I think I accidently deleted the icon at the bottom of the VMware window and now the web cam is not recognized in Windows at all.  The iSight camera works just fine under MacOS, but I can't find how to do Windows or VMware recognizes the camera.  I guess I could reinstall VMware and it might solve the problem but I'm looking for an easier route when it exists. Someone at - it a similar problem?

  Thank you

  Dennis

  Have you checked the settings of your virtual machine to see if the isight is activated must be forwarded to the VM?  You might consider checking or setting these options under usb.  Also if you have version 2.0 only then you can consider update 2.0.5 before reinstalling VMware.

• Genuine Windows 7 on MacBook Pro running in the partition, BootCamp with VMware Fusion 3.1

  I'm having a problem with Windows 7 Ultimate 32 bit.

  I installed Windows 7 on my Bootcamp partition and until recently he worked well as well when I ran into VMWare Fusion.

  When I boot on my Windows 7 on Bootcamp partition, everything is OK.  But then when I run it in VMWare Fusion it says that my copy is not genuine.

  I just went through the automated phone system and entered the codes, and so now while I'm running Fusion Windows is genuine.

  I fear, however, that when I return to the execution of the partition, Bootcamp, Windows will say that is not true, once again.

  Only, I have a copy of Windows 7 and can only run from the VMWare Fusion or Bootcamp partition at any time.

  How can I fix it if Windows is more said that it is not authentic, when I switch from a training camp and VMWare Fusion?

  I need to be able to run Windows while I'm on the side of Mac at the same time

  Any help would be greatly appreciated.

  If you used the same Windows Installer Bootcamp, VMWare Fusion product key, there is the question.  You can only install and activate a 1 license of Windows 7.  The second installation requires own license that you can buy on the Microsoft Store. Carey Frisch

• Problem with windows using vmware fusion

  I have a mac book pro and a part of it running windows 7 using vmware fusion. It worked great for 3 years and today I went to open the side windows and all I get is windows media player. Any button I go, medial player arrives. At Christmas, we received an e-mail that fedex was unable to deliver a package, and to download the shipping label to follow, it is phishing so could I have downloaded a virus? How to do this problem?

  Thank you

  Debbie

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question.

  I suggest you to consult the steps mentioned in the article:

  EXE by default association problem windows7
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/exe-default-Association-problem-Windows7/6becdf43-28d2-4eb5-B3E8-a7fcd0b5c69b

  Hope this information helps.

• Activate Wifi on Windows in VMWare Fusion on Mac

  I want to activate the Wifi in the operating system Windows 8 on Mac OS X 10.8.3 (Mountain Lion) in VMWare Fusion 5 to support the test and development of software, that I write that evaluates the available Windows Wifi access points.

  I know how to activate the Windows Zero Configuration Service (ZCS) via sc config or services.msc , but the Wifi is not a type of connection available.

  I tried to run VMWare Fusion with various 'Network Adapter Settings', including:

  • Share with my Mac
  • NAT
  • Bridged (automatic detection)
  • Bridged (Wifi)

  Windows 8, regardless of what I do, tells me that there is no wireless network adapters.

  How do I enable Wifi in Windows 8 in VMWare Fusion on a Mac so I can scan to card Wifi and connect/disconnect at will?

  Thank you!

  -David

  Windows 8, regardless of what I do, tells me that there is no wireless network adapters.

  How do I enable Wifi in Windows 8 in VMWare Fusion on a Mac so I can scan to card Wifi and connect/disconnect at will?

  VMware is only a map of Ethernet network wired to the guest regardless of the type of network adapter in the host OS.  If needed/wanted a WiFi adapter in the comments then you will need to provide your own, like a USB WiFi network adapter.  Network adapter WiFi integrated host cannot / will not be seen in the comments.

  Take a look at the Ethernet card in: virtual hardware specifications

• VMware Fusion 5 and upgrade to Windows 8-

  Hello

  I am trying to install a partition from Windows 7 to Windows 8 bootcamp. The installer is at 30% and dies. The error message is "Windows 8 installation doesn't have." The process stops and returns me to Windows 7.

  I ran the process a few times with the same results. I ran the upgrade wizard. He tells me about a secure boot is only not available and maybe I need to install an application to play DVDs on Windows 8.

  Someone at - it advice? Bit a noob to Windows stuff so apologies if I'm missing out some crucial information. I have had a look through the forum and could not see anyone have reported a similar problem.

  See you soon

  Watch 'Turn Windows 8 Pro Upgrade' Windows 8 Upgrade: pure install possible?

  Also as a reference to clean install from upgrade media have a look at the information contained in: upgrade to Windows 8 Pro in Windows XP in VMWare Fusion 5 on Mountain Lion

• Text on VMware Fusion 3 Server can be also clear that when XP runs on a Windows computer?

  I installed Windows XP in VMware Fusion 3 on a MacBook Pro with OS 10.6.2. Text is not as sharp as it would be on a Windows machine. This is particularly noticeable when I compare websites in Fire Fox in VMware to the same site on Fire Fox in OS X I have the same problem in Word, Excel and ACT!

  Text on VMware Fusion 3 Server can be also clear that when XP runs on a Windows computer?

  oldbologna wrote:

  I don't have access to a Windows machine for the time being to provide a screenshot. I'll try to give an example for the record later, even if I have to do a bit of research to find a way to do

  On a Windows computer simply press the print key (sometimes shown as Prnt Scrn) screen and this places a copy of the office to the Clipboard, and then you can paste it into Paint (start > run > mspaint) and save it as a .jpg file.

• resize boot camp partition, formatted and installed windows 7 - now cannot open in vmware fusion

  Here are the steps that I took...

  1 has started with the copy of Windows XP in the boot camp partition. "This is accessible from VMWare Fusion."

  2 resized (from 6 GB to 18 GB) and formatted the boot camp partition.

  3 successfully installed Windows 7 directly in the resized partition boot camp (not through VMWare Fusion).

  4. starts in OSX (latest version), open VMWare Fusion and attempted to access the partition to boot camp/vm. Received an error message charging me to disassemble and reassemble the physical disk changes. However, since I did it, he cannot find a bootable disc, therfore making it the useless bootcamp VM.

  Any help would be appreciated.

  Paul

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition and if you changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also make sure that you copy the entire command below "rm" line at the beginning of the ' (quote) after the p in the Camp. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• A product key from an old computer can be used for vmware fusion on a new mac?

  We used to own a Dell computer with windows XP Professional OS. Lately, we have switched all of our Mac computers and no longer use the old windows computer. I have the product key for this OS and I was hoping to use the CD of windows XP on VMware fusion and relocation (in order to play video games). So far, the installation was almost a success until it would not accept the old operating system product key. Is there a way to get a new product key?
  PS The only purpose is for the PC games we have.

  can I get another free product key? I still have the old computer

  you need to know if the old pc had an O E M version of windows, because

  windows OEM versions are locked to the motherboard of the PC they where first installed at.

  If the product key you have is from a version marketed Windows (non oem) you can install the version on another pc if you take away the first pc.

  in other words, a version on a pc at the same time.

  You should check with the microsoft Web site dealing with pirated software and product keys.

• How to configure Windows 7 through vmware and activate on my Mac?

  Windows 7. Indigenous and in Vmware Fusion

  I have a new macbook pro with Mac OS X Lion and I clean installed Windows 7 on bootcamp partition.

  Windows 7 is activated.

  I want to use this partition of Windows 7 with Vmware Fusion so I don't have to reboot to switch between the two operating systems.

  Windows 7 through vmware asks activaton. How can I proceed?

  Hello

  Given that you already activated this product key, activation of the internet will not work.

  Launch activation and choose the show me other ways to activate the option.

  Select the phone activation option.

  When you call the number you will be offered a few saved options, do not select one of these and you will be connected to a representative directly.

  Explain just what you do, and they will manually activate the system for you.

  Concerning