With leopard 10.6.8 running Windows XP on vmware fusion 3.0 NVIDIA problem

Similar Questions

• Put MacBook to sleep when you run Windows XP on vmware Fusion / screen when opened black top (waking from sleep)

  REF.: macbook 2.4 ghz, 4 GB of ram, osx 10.5.8, vmware fusion 2.0.5 running Windows XP sp3 with 2 GB of Ram assigned

  Could you get it someone please let me know what is the reason that every time vmware runs, and I close the lid of my laptop, each time I open the cover to get back to work, I get only a black screen.

  Should I be hitting the button suspend running vmware OS, before you close the lid of my computer and he get to sleep?

  Thank you for any advise you can provide.

  Kind regards

  Hello

  You can just put some time you're comfortable in these areas. It should not matter.

  I think it is it is happening is that your guest is going to suspend - not the vmware suspend, but WinXP suspend mode - and that's for a reason any does not cover.

  If my suggestions do not help, you can also try to re - install VMware tools, but take a snapshot before that, just in case

  --

  Wil

  _____________________________________________________

  VI-box tools & scripts wiki at http://www.vi-toolkit.com

• Error Code 1606 when installing software on iMac running Windows 7 in VMWare Fusion

  I get this problem when you try to install 3rd party software: Error 1606: could not access network location \\vmware-host\Shared Folders\Pictures\

  I use Windows 7 installed as a virtual machine using VMWare Fusion v 3.

  Not sure if this is relevant - but when I open my computer, network location, 2 locations are shown: shared folders (\\.host) (y) and the files shared (\\.vmware-host) (z) -, which appear as disconnected network drives when you examine their properties.

  I hope you can help!

  Windows cannot access \\vmware-host\shared folders\desktop
  http://communities.VMware.com/message/1429202;JSESSIONID=76FEFD30AD5316F7F518CD6CBCEA3386

  Using folders shared
  http://www.VMware.com/support/WS4/doc/running_sharefold_ws.html

  Also try the Vmware forum.

  VMware Fusion® (for Mac)
  http://communities.VMware.com/community/VMTN/desktop/fusion;JSESSIONID=0E27C5D458C2F3B6185B0AB9BA13B55C

  http://www.google.com.au/search?hl=en&RLS=com.Microsoft%3Aen-au%3AIE-Address&q=%22%5C%5Cvmware-Host%5CShared+Folders%5C%22&btnG=Search&aq=f&aqi=G1&AQL=&OQ=&gs_rfai=

• I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again

• I am running Windows Server 2003 R2 and am having a problem with a user profile.

  I'm running windows server 2003 r2 and am having a problem with a user profile, we have a logon.bat file that runs to map drives, but also call a logon.html file, that user gets the logon.html appear, but IE blocked then this happens only for a single user, others are ok. Any ideas please?

  original title: profile of Win 7 issue

  Hello

  Your Windows 2003 R2 server question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope the information is useful.

• I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen

  I've had my laptop for a year, and it is currently running Windows 7 Professional. I recently had a problem that causes the black screen randomly with the screen turned on (I mean everything is black and I can't see a thing, but can still see the light of the LCD screen). This often happens when I open/close a window, browsers web example, the records, or even during the boot. I want to know how to solve this problem and if the upgrade to Windows 10 works for her.

  Hi Haolin,

  Thanks for posting your query in Microsoft Community.

  I do not understand that the screen goes black randomly, and I'll be happy to answer your query. Let me ask you;

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time it worked?

  Video card problems are the most common cause of this problem.

  Try the following troubleshooting procedures in the order. If the steps described in the first procedure does not resolve the problem, continue to the next procedure.

  Step 1: Reinstall your video driver

  1. Right click on the bar tasks and then click Start Task Manager.

  2. Click on the processes tab, click explorer.exe, and then click end process.

  3. Click file, and then click new task (run).

  4. In the text box open, type explorer.exe, and then click OK.

  5. Click on the Start button , go into the Device Manager in the start search box, and then, in the search results, click on the peripheral Manager.

  6. Double-click on display the cards, right click the display device, click Update driver software, and then follow the steps in the wizard that appears. You can also visit the website of the manufacturer of the computer support and install the latest available graphics cards for the same model of computer you have.

  Note: After the driver is re-installed, you may need to restart your computer to complete the installation. You may also need to adjust the resolution of the display to its previous value. For more information, see change your screen resolution.

  Step 2: Search for registry problems

  1. Right click on the bar tasks and then click Start Task Manager.

  2. Click on the processes tab, click explorer.exe, and then click end process.

  3. Click fileand then click new task (run)

     In the text box open, type explorer.exe, and then click OK.

  4. Click on the Start button , type regedit in the search box, and then, in the search results, click on regedit.exe.

  5. Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  6. Click to select the WinLogon key and then in the right pane, click on Shell. The value of shell in the data column must be explorer.exe. If the value of Shell is not explorer.exe, double-click Shell, and then, in the value data text box, type explorer.exe, and then click OK.

  7. Close the registry editor and restart your PC.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

  If this procedure resolves the issue, you are finished. If this is not the case, proceed to the next set of steps.

  Step 3: Start the computer in safe mode and run system restore

  1. Click on the Start button , click the arrow next to Shut Down, and then click restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. In the Advanced Boot Options screen, use the arrow keys to select Safe Mode, and then press enter.

  4. Log your computer with a user account with administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.

  5. Click on the Start button , type "System Restore" in the search box, click System Restore, and then click Next. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. Choose a restore point when your PC worked as expected, click Next, and then click Finish.

  7. Restart your computer normally.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  If these steps resolve the issue, you are finished. If not, try to repeat the steps and chooses an older restore point (if available). If that does not resolve the problem, contact your computer manufacturer or the technical support for further assistance.

• Using the stand-alone converter 5 with entry as local windows 7 in vmware fusion 4 output, the output is a folder with many files. How can I get this folder into a single file with the extension windows7.vmwarevm?

  I use standalone converter where I am converting my local windows 7 in vmware fusion 4 at the exit. When I made the migration wizard previously, I had an output of a windows7.vmwarevm file. However, when I made the converter, I had a folder called windows7. In this case, I had several files.

  Is there a way for me to convert all these files into one file, that is to say: windows7.vmwarevm? do I need to use the converter or other vmware tools?

  Welcome to the community,

  Please take a look at Re: how to convert a package/package of my folder on drive hard/vmware fusion? to see if that helps. This is a pretty old post, but I think that it is still valid.

  André

• Windows 7 on VMware Fusion

  I scoured some trail and error to install Windows 7 on my Virtual Machine. But after giving him a well-founded logical thought that I have accomplished the task. Most frequent concerns resulting was with SCSI controller problems. AFET overcome only by downloading files from the website of VMware and install in the folder C: / drive on my virtual Arena I could select it driver in the Windows 7 Installations pane and continue with the installation of the operating system.

  However, I also had to ensure that the VMware Tools was up-to-date inorder to some hardware problems correct. However, there is always this problem with my computer internet setting virtual driver.

  First of all you need not download any drivers SCSI from VMware to install Windows 7, if you do it right.

  If by chance it was a Machine virtual Windows XP you upgraded to Windows 7 well you should not have wasted your time because Windows XP is not directly upgraded to Windows 7 and since it is a Virtual Machine, all you have to do is just to cross the new VM Wizard by selecting the version of Windows using your and if you use upgrade media then use the information contained in "[clean install Windows 7 with upgrade Media | ]. "[http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp]" to the install/activate.  I use 2 method successfully.

  If it's an upgrade, you can then delete the virtual Windows XP Machine after you have saved your user data and you have Windows 7 running.  CTR-click simply the target virtual machine on the Machine's virtual library and select Delete.

  If you want to transfer files and settings, then take a look on:

  Windows Easy Transfer for transferring from Windows XP (32 bit) to Windows 7

  Or

  Windows Easy Transfer for transferring from Windows XP (64 bit) to Windows 7

  =========

  In any case as ' However there is always this problem with fixing my VM internet pilot. "if it was an XP upgrade then this would explain and you need to change the Type of operating system to Windows 7 or Windows 7 x 64 and it can make the Virtual Machine library.  You also remove the network card under the parameters of the Virtual Machine, and then add again.  Note that you must do this with stop the Virtual Machine, not suspended.

  Otherwise, take a look at the collection of information for VMware Fusion and archive and attach a copy of the configuration as well as the vmware.log file .vmx file.

• My users will not be displayed when I slave my hard drive with Vista on a computer running Windows 7.

  How can I solve this problem and have my admin and my user appear in the directory?  My hard drive went out on me on my other computer, so I tried to slaves in the top of the tower.  All other folders appear in my directory, but not users.  There are default user on this subject.  Can I use a data recovery software, but it will take a day and a half to get the files.  I ran the program of restoration of data for a few hours and it has recovered some of the pictures I want.  So I try to see if I'm doing something wrong, before investing in the recovery of the entire file.  Thank you.

  Steve

  Hello

  see this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/hard-drive-with-Vista-installation-not-showing-up/8c810028-96c2-4d89-B918-a2a6712aa315

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/help-cant-see-all-the-files-from-my-old-hard-drive/bd3a9873-d871-4ef6-8b55-50292e7e0105

  I hope this helps.

• need help with acer laptop computer laptop running windows 7 service pack 1 32-bit

  I would like to know if I can install vmware player on my laptop I got an error message saying that I didn't have something. Thank U

  For a typical host system, we recommend that you have a 1 GHz or faster processor (2 GHz recommended) and 1 GB of RAM minimum (2 GB RAM) recommended. You need to have enough memory to run the host operating system, more memory required for each guest operating system and for applications on the host and the guest.

  I'm sorry to say this, but your laptop can't run VM player. I doubt that you can install VMware Player on it. Even if you manage to it won't be of any use. Is only useful if you have more than 4 GB of RAM to execute at least one or two reviews of the virtual computer.

  If you found my answer correct/useful please close the thread by checking the appropriate response.

• Can I install another AntiVirus & and/or firewall with "ESSENTIALS"? I'm running Windows XP w/SP3, 32-bit on a Dell Inspiron 1545 laptop.

  I have to reinstall all or part of the following programs?

  (1) McAfee Total Protection.

  (2) system Mechanic Professional.

  I'd appreciate any help.

  E-mail address is removed from the privacy *.

  More installation of an antivirus program can cause serious problems.  If you have installed Microsoft Security Essentials , do not install McAfee Total Protection or System Mechanic Professional .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• My error reports windows 8024402F on run windows update. FixIt unable to solve the problem.

  I was faced this problem of win vista do not update on windows update is running. Error reported is 8024402F. I tried to do a full disk check and also ran mic. FixIt two or three times. The Fixit says that the error has been resolved, but it remains. My security essentials is not also updated and it is also in yellow.

  Please provide assistance.
  Akhilesh Das
  India

  0X8024402F WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS cab file external treatment is completed with errors.

  If you have tried the Fixit the answer, I suggest that you manually advance in long lists

  http://support.Microsoft.com/kb/836941

• I am running Windows Vista Home Premium and I have this problem of not being able to recover Windows updates. I get error 80080005

  I tried to use the tips in a similar windows update error, but it does not give me the option to run as administrator when I right click on cmd

  See this previous & related discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/29d7f9d1-56cd-42f3-bd44-7de8448ef70e

  Assuming that the Vista SP2 is not installed...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Problem with windows using vmware fusion

  I have a mac book pro and a part of it running windows 7 using vmware fusion. It worked great for 3 years and today I went to open the side windows and all I get is windows media player. Any button I go, medial player arrives. At Christmas, we received an e-mail that fedex was unable to deliver a package, and to download the shipping label to follow, it is phishing so could I have downloaded a virus? How to do this problem?

  Thank you

  Debbie

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question.

  I suggest you to consult the steps mentioned in the article:

  EXE by default association problem windows7
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/exe-default-Association-problem-Windows7/6becdf43-28d2-4eb5-B3E8-a7fcd0b5c69b

  Hope this information helps.

• HP 8500 will be analyzed with a computer running Windows 7 and not for another.

  HP 8500 will be touring with one of my computers running windows 7 and does not scan for another, once connected USB and both running windows 7 family. I reinstalled the drivers on the second computer, nothing is done.

  The error says it can not connect, however the print function works. The HP utility "fix" would also not work.

  The second computer is windows 7 64 bit.

  The solution you provided worked. Thank you. I have it plugged into USB 3.0 causing the computer communicate only not with the scanner. Thank you very much. I really apreciate your help. Have a great day!