Windows-7 Pro for Windows - 7 Pro via Easy Transfer?

I would try to use Easy Transfer to clean my Windows 7 Pro install.

Can I run Easy Transfer on my Windows 7 Pro system, reformat the hard drive, reinstall Windows - 7 Pro and run Easy Transfer to recharge, less junk?

Thanks in advance.

You may notice that if you do as Andre suggested, your programs will not be kept, and each of them will need to be reinstalled.

Tags: Windows

Similar Questions

OfficeJet Pro 8610: Easy transfer Fax speed dial list between 2 printers?

I just bought the 8610 pro and I want to know if there is an easy way to move the dial list fast fax during the bonus of 8600 with ease? As opposed to delayed manually each character on this small touch screen of the printer!

Hello

CERES a printer speed dial can move to another. but you can click on manage fax from the HP Officejet 8610 software settings, and then select the speed dial tab.

From this screen, you can add new Ceres using your PC speed dial.

If you still have your old printer you can locate the existing entry as its software.

Shlomi

Windows Easy Transfer does not

I got a new computer WIndows 8. I want to transfer my data from my Windows 7 computer. Easy transfer works on windows 7 but not 8. When I pull up on the 8 I have the question Yes or no. Yes constituting the data is already on a drive hard and being that I have not used before. If I click No., it closes. It brings me to another menu as it does on windows 7. I want to transfer data via wifi.

Transfer files and settings with Windows Easy Transfer in Windows 8

Windows easy transfer supports several methods to transfer your files and settings.

You can use Windows easy transfer to transfer information to a computer running Windows 8 computers with one of the following operating systems:
- Windows 8
- Windows 7
- Windows Vista
- Windows XP Service Pack 2 (SP2) or Service Pack 3 (SP3)
NOTE: Windows Easy Transfer cannot transfer files between a 64-bit version of Windows and a 32-bit version of Windows. Instead, the files must be transferred manually using external storage devices. To find the version of Windows on your computer, see the is the Version on my computer 32-bit or 64-bit Windows
? support document.
Step 1: Determine the best method of transfer

When you transfer files between Windows XP, Windows Vista, Windows 7 or Windows 8 computers, choose a method that works on both computers. Windows easy transfer supports the following transfer methods:
- External hard drive or USB flash drive: to use a USB flash drive, you need a USB port on each computer. If you use an external hard drive, it must be compatible with both computers.
- Easy transfer cable: you need a special USB cable designed to work with Windows 8 and Windows Easy Transfer and a USB port on each computer. If you don't have an easy transfer cable, you can order one online or get one at an electronics store. The easy transfer cable is supported on Windows XP, Windows Vista, Windows 7 and Windows 8 computers.
  
  NOTE standard USB cable: A cannot be used to transfer files and settings between computers.
- Network: both computers must be connected to the same cable or wireless network and both computers must be able to share files and folders.
To decide which method to use, consider the amount of information you will sit. If you are transferring everything from all users on the computer, or all of your user account files, an easy transfer cable, external hard drive or a network works well. If you transfer only a few files or folders, a USB works well.
Step 2: Open Windows Easy Transfer on the new computer in Windows 8.1

All the following steps on the new computer from Windows 8 to open Windows Easy Transfer. You must be logged in using an administrator account.

NOTE: before performing the following steps, unplug both computers to the Internet and temporarily disable any firewall software that may be running.
1. From the start screen, type transfer to open the charm of the search, and then select Windows Easy Transfer in the search results.
  
  Figure 25: Selection Windows Easy Transfer
2. In the Welcome screen, click Next to continue.
  
  Figure 26: Windows Easy Transfer welcome screen
3. In the window that you want to use to transfer items to your new PC , select the method to use to transfer items.
  An easy transfer cable: a special USB cable, you can buy to transfer files from one computer to another
. You cannot use a regular USB cable to transfer files with Windows Easy Transfer.
- A network: transfer files over a network.
- An external hard drive or a USB flash drive: use the storage space on an external hard drive or USB key.
Figure 27: Choosing a method of transfer
In the window PC which are now automatically using , click This is my new PC.

Figure 28: Indicate which computer is used

In the window you need to install Windows Easy Transfer on your old PC , choose to install Windows Easy Transfer on the old computer.

If your computer uses Windows XP or Windows Vista, click on my old PC running Windows XP or Windows Vista. Go to the next step.

If you have already installed Windows Easy Transfer on the old computer, click I already installed on my old PC. Skip this section and go to the collection of files and settings from the old computer .

If your computer uses Windows 8 or Windows 7, click on my old computer is running Windows 7 or 8. Skip this section and go to the

Figure 29: Choose the operating system for Windows Easy Transfer options
On the screen, How do you want to install Windows Easy Transfer on your old PC , select the location to save the Windows Easy Transfer files to install on your old computer. If you use an external hard drive or a USB flash drive, plug the external hard drive or a USB flash drive in the new computer and then make the selection.

Figure 30: Choosing a method to install Windows Easy Transfer
Follow the on-screen instructions for the method you are using.
Navigate to the folder on the external drive, a network, or a USB flash drive to save the files Windows Easy Transfer, and then click OK.

Figure 31: Find the folder of files to transfer

Windows Easy Transfer copies the files and displays the progress onscreen.
When Windows Easy Transfer is done copying files, a window opens instructing you to install Windows Easy Transfer on the old computer.

NOTE: do not click Next until you have installed Windows Easy Transfer on your old computer and saved the files to transfer to the new computer.

Figure 32: Installing Windows Easy Transfer on your old computer
If using an external hard drive or a USB flash drive, remove it from the computer.

Step 3: Install Windows Easy Transfer on the old computer (Windows XP and Vista only)

If your computer is running Windows 7 or Windows 8, skip this section and go to theAll these steps on the old computer to install Windows Easy Transfer from a hard drive external, a network drive, or a USB storage device.

If you use a USB storage device or an external drive, connect it to the computer now.
In Windows Explorer or Windows Explorer, find the external hard drive, a network drive, or a USB storage device.
Double-click on the external drive, a network drive, or a USB storage device.
Once installation is complete, proceed to the next step.

Step 4: Collect files and settings from the old computer

After you install Windows Easy Transfer on the old computer (not necessary if the old computer is running Windows 7 or Windows 8), follow these steps on the old computer to collect files and settings to transfer to the new computer.

In the Welcome window, click Next.

Figure 33: Welcome to Windows Easy Transfer
In the next window, select the method to use to transfer items:
- An easy transfer cable: a special USB cable, you can buy to transfer files from one computer to the other. You cannot use a regular USB cable to transfer files with Windows Easy Transfer.
- A network: transfer files over a network.
- An external hard drive or a USB flash drive: use the storage space on an external hard drive or USB key.
Figure 34: Choose a transfer of methods
Select This is my old PC.

Figure 35: Indicate which computer is used

Windows Easy Transfer scans the user accounts to find all the files and the settings that can be transferred.
Select the items to be transferred

. When you are finished, click Next.

Figure 36: Choose what to transfer from your old computer

If you want to protect the Windows Easy Transfer file with a password on the screen to Save your files and transfer settings , enter a password, and then click Save.

Figure 37: Enter a password (optional)

Navigate to the location on the network, external hard drive or USB drive to save the download file, and then click Open.

Click Save.

On the screen of your file transfer is complete , click Next.

Figure 38: Your transfer is complete

Check that the files are saved to the correct location, and then click close.

If you have disabled the firewall software running on the computer, re-enable the firewall software.

Step 5: Transfer files and settings to the new computer

Follow these steps to transfer files and settings to a computer running Windows 8.1.

Do one of the following values, depending on how you transfer files and settings:
- Plug the Easy Transfer cable on both computers.
- Plug the USB key or external hard drive on the new computer.
- The new computer, navigate to the network folder where you saved the download file.

The Windows Easy Transfer window should always be open on the new computer. If this is not the case, open Windows Easy Transfer again and click Next.

NOTE: the following instructions are based on the transfer of data from a computer using Windows Vista on a computer using Windows 8 with a USB key. If you use different different versions of Windows or a transfer method, your screens may be different.

Figure 39: Installing Windows Easy Transfer on your old computer

On the next page, click Yes.

Figure 40: Indicates if the files have been saved

Find the Windows Easy Transfer file

. Click the Windows Easy Transfer file, and then click Open.

Figure 41: Opening the Windows Easy Transfer file

If you used a password when you saved the download file, enter the password, and then click Next.

Figure 42: Enter the password (optional)

Select user accounts to transfer and then click transfer.

Figure 43: Choose what to transfer

Windows Easy Transfer to transfer files and settings to the new computer.

Figure 44: Transfer

When the transfer is complete, follow these steps to view a report of files that have been transferred, or a list of applications that you can install on the new computer.

On the screen of your transfer is complete , click see what was transferred to view a report of transfer listing the files and settings that were transferred.

Figure 45: Open Windows Easy Transfer reports

Reports of transfer Windows easy screen opens in the tab transfer report.

Figure 46: The report transfer in Windows Easy Transfer Reports tab
- To view a list of applications which have been transferred from the old computer, click the tab report App on the screen of Windows Easy Transfer reports.
  
  Figure 47: Report App in Windows Easy Transfer Reports tab

If you have disabled the firewall software running on the computer, re-enable the firewall software.

Desperate using Windows Easy Transfer (WET)

I tried for two days to use Easy Transfer to migrate files on my old computer (Vista) to my new computer (Win7). Using the WET Migration Wizard process, I copied Windows Easy Transfer several times on a flash drive and subsequently downloaded to the old computer. Said Assistant click the shortcut to transfer files (on the old computer) to get the WET key. Once again, I did this several times, but have never had no answer except a half a second box that is gone before I can read what is said. I have only one monitor and am using an easy transfer cable to see what files are on both computers. So far, using the easy transfer cable has got me nowhere as much as it has announced to its use (file transfer) is concerned. Ideas for this end-user desperate dilemma?

Have you created a. MIG file that you saved on a device of external storage or you tried with the easy transfer cable.

Your transfer is similar to the following article?

http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

References to Windows XP, but the same principles should work too for Vista.

With the help of Windows Easy Transfer of WinXP Pro 32 for Win 7 64.

Can use Windows Easy Transfer to migrate files and settings from an IDE HDD running Windows XP Pro 32-bit to a new computer with SATA HDD and clean install of Windows 7 64-bit?

Yes. (Your question has nothing to do with Windows Update). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Windows 7 Home Premium set to upgrade to Windows 7 Pro via anytime upgrade - still missing Remote Desktop connection

Hello. I upgraded a PC Windows 7 Home Premium to Windows 7 Pro via the anytime upgrade. My goal was to get the functional Remote Desktop connection so that I could connect to a machine at work. But, after the upgrade, activating the new W7 pro product and install all updates, still miss me desktop connection remote when I go to start / all programs / accessories. Can someone tell me how I could get the files added to my machine?

If you click on start, type: Remote Desktop

It appears?

You can also try the following:

Press Windows key + R

Type: mstsc.exe

Press enter

It appears?

I need number phone to call microsoft for windows 8 pro for new machine windows easy transfer 8 home

I need number phone to call microsoft for windows 8 pro for new machine windows easy transfer 8 at home. Victory 8 pro is a desktop computer that is no longer used and I just bought new laptop which has win 8 64 OEM. Can I do this?

Press the Windows key + X

Click System

On Windows, click the link:

Get more features with a new edition of Windows

Click on the "I already have a product key link.

Enter your product key and you will be promoted to the Pro.

Go to reactivate by phone:

Activation of the phone:

1. press the Windows key + X , and then click run, and then type: slui.exe 4

2. then press the ENTER"" key.

3. Select your "country" in the list.

4. choose the option "activate phone".

5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

6. explain your problem clearly to the support person.

I bought Lightroom 3 and installed on my MacBook Pro via a disk. Later, I upgraded via web for Lightroom 5. My question is how can I install a copy of Lightroom 5 on my new iMac?

Download, install and activate...

Lightroom - all versions

Windows

http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

Mac

http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

How do I pair for windows 10 laptop via bluetooth with the iphone 6

How do I pair 6 + for windows 10 laptop via bluetooth with the iphone?

You do not have. This isn't a feature of iOS. It has never been.

I have Lightroom 4 purchased in disc download format. I'm considering buying a MacBook Pro, but it's not a CDRom. Can I use the serial code for download on MacBook via the internet? I've only used once disks for my iMac.

you need a serial number for mac lr. the serial number for pc and mac are different.

Lightroom serial number is unique because it is cross-platform: works on PC and Mac.

Same serial number for both.

I have lightroom and photoshop cs6 on a windows computer. How to transfer the downloads and photos of my new Macbook pro

I have Lightroom and Photoshop cs6 on a windows computer. How to transfer these programs and to my new MacBook pro?

So, how can I do?

Windows 7 Pro. Using Easy Transfer

How to use easy transfer

Good question:

I used Windows Easy Transfer at least a hundred times - literally. It works very well. I've never had it mess up a system. It takes time to run and could be hours if you have a lot of data. So please be patient.

Please understand at the outset that the DATA is what is transferred. Applications or programs must be installed separately on the new system. It is best if you first install the applications.

WET gathers all DATA from specific locations on the old system, as well as all custom settings that you use from the old computer and produces a great big file that is stored on an external drive. Then when you connect this same external drive to the new computer and run WET and identify yourself as a new, it copies all data in the right places.

WET is a very good program. However, hedge your bets and make a backup of the data from the old also.

The Acronis program that you are probably referring is something completely different. He makes an exact copy of the drive installed in the old that you can then copy to the new computer drive. IT WOULD BE A BIG MISTAKE! Big mistake because all the drivers and related to the new computer software would be replaced by the bad stuff from the old. That imaging process is better used on the new computer before loading your programs or data. The image is an insurance policy that can be used to re - build your computer should it become irreparably damaged or you need to replace the hard drive.

I hope it's clear. If this is not the case, just ask.

using recovery drive after upgrade to 8.1 pro via the pro pack

I ordered a HP envy 15 TS precoonfigured j - 100 quad system during Black Friday pre sales - this machine has everything I need except Pro 8.1. I intend to upgrade the operating system to 8.1 pro by buying and installing the Pack Pro Micorsoft Windows 8.1.

My questions are:

(1) only the installation/upgrade generates a new file recovery?

(2) if my system breaks down and I need to reinstall windows 8.1 via the recovery disk, what is the sequence of steps to restore my system Pro 8.1.

Upgrade to Windows Pro 8.1 does not generate a new recovery file. I suggest that you create a recovery disk before moving on to the pro.

If the system breaks down in the future, you can use the recovery disk and restore the system as long as the plant and try the upgrade to pro again.

HP PC - created disc recovery or saving an Image recovery on a USB (Windows 8)

Learn how to create DVDs of recovery or record a recovery image on a USB flash drive to restore all the original software, in the event of a major computer problem

Alternatively, if you pass successfully to pro, you can also create a backup of the system. Using this, you can directly restore your system to Pro in the event of system failure. For back system procedure, see the following link:

http://winsupersite.com/Windows-8/Windows-81-tip-use-system-image-backup

HP PC - created disc recovery or saving an Image recovery on a USB (Windows 8)

Win XP Pro for Win 7 Enterprise - easy transfer Win

I'm upgrading to Win XP Pro to Win 7 Enterprise. I've followed this sequence:

(1) the user XP files and Settings Transfer Utility to copy the XP files and settings on an external hard drive.

(2) system to upgrade to Win 7 Enterprise.

(3) reinstalled the software.

(4) tried to use Win Easy Transfer to restore files and settings. Traveled outside the disk, as requested, but says file not found.

My question:

I think not all of the details of what type of file I am looking for. There are several IMG0000?. DAT and one called STATUS in a directory called USMT2. UNC.

(a) what file is the transfer utility you are looking for?

(b) if the file is not there, is there a way I can restore my files and settings in the image files?

Thank you.

http://social.answers.Microsoft.com/forums/en-us/w7install/threads

"Download Windows 7 installed and activated on your PC."

They will help you in the Windows 7 Forum at the above address.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

For any question on Windows 7:

http://social.answers.Microsoft.com/forums/en-us/category/Windows7

Link above is Windows 7 Forum for questions on Windows 7.

Windows 7 questions should be directed to the it.

You are in the Vista Forums.

See you soon.

Mick Murphy - Microsoft partner

Cannot install Windows Easy Transfer for update to Windows 7

I am running Vista Home Premium 64-bit sp2 and upgrade to Windows 7 Pro. I know I need everything back up, install 7 and then restore my data and programs. When I install Windows Easy Transfer, it downloads very well, then on run I get 'Stand Alone Windows Update installation', then "Looks For Updates" and then "update applies to my system" and nothing, fact. I made sure I download the Easy Transfer for Vista 64 bit, but I'm stumped. Any ideas?

Hello

Windows Easy Transfer is an integrated application available on all editions of Windows Vista or Windows 7. It is not necessary to download explicitly on the Vista computer.

To access Windows Easy Transfer, try the following steps.
1. click on start, type Windows Easy Transfer and click transfer files from Windows in the list.
2. follow the instructions in the wizard and complete the tasks successfully.

Check out these links for more information:
1 explore the features: Windows Easy Transfer:
http://www.Microsoft.com/Windows/Windows-Vista/features/easy-transfer.aspx
2. the transfer of files and settings: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions
3. install, reinstall, and uninstall Windows:
http://Windows.Microsoft.com/en-GB/Windows/help/install-reinstall-uninstall

Let us know if you have any questions, so that we can clarify.

Kind regards
Syed
Answers from Microsoft supports the engineer.

Windows-7 Pro for Windows - 7 Pro via Easy Transfer?

Similar Questions

Maybe you are looking for