OfficeJet Pro 8610: Easy transfer Fax speed dial list between 2 printers?

Similar Questions

• OfficeJet Pro 8610: Cannot receive faxes

  I am able to send faxes but not receive them. I turned off in error correction, changed the fax speed to slow and auto answer enabled. None of this has worked.

  I think the problem might be the way that the printer and fax are connected. I have a cable modem and the telephone line goes directly from the modem jack. My phone service is through Comcast cable, then nothing is plugged directly into the wall jack to the phone.

  I have a phone on the same phone number, which is plugged into the upper Jack on the printer. The (phone) cord frrom the modem cable to the printer is plugged directly underneath.

  Hello @foxtail09,

  Welcome to the forums of HP.

  I understand that you Officejet Pro 8610 is unresponsive to faxes.

  I would like to help.

  Everything seems correct.

  Your phone line has a service of voice mail on this subject?

  Voicemail could be intercepted the fax before that the printer gets it.

  Run a test fax report to determine the status of fax on the printer and whether or not it is properly configured to send and receive faxes.

• HP Officejet Pro 8610: hp Officejet Pro 8610 cannot send faxes "Fax line State Fail"

  Dear support,

  I would like to send and receive faxes from hp Office jet Pro 8610:

  -the phone system is on PABX

  -J' have installation eja prefix dial number is "9".

  -Fax, run the Test, he failed "Test status of line Fax".

  -J' removed the prefix number, still aren't.

  -Here are the pictures:

  

  -Here is the arpeggio

  

  I thnk there is no problem with the cord, it has passed the test.

  -When I dialed the number of fax to the recipient, the message 'no response '.

  -J' plugged the 2 - Ext on the phone port, it can be used to call (using the 9 prefix) and receive a call.

  Help, please

  It was caused by the digital telephone network. Fax it extreme requires analog network.

  solved by me.

  Thank you =)

• Problems printing to office 2007 - OfficeJet Pro 8610

  I have a new OfficeJet 8610 Pro who don't print from Office 2007 (Word and Excel). Print jobs that are submitted to the printer go into a black hole somewhere and never find yourself in one file printing or to the printer.

  To support cat HP printer driver DeskJet 6980 to allow printing, but I consider that it is a workaround rather than a permanent solution.

  I can print from a web browser form. I can't print a test page with the devices and Sound > devices and printers > HP OfficeJet Pro 8610 (network), but I CAN print a test page for print management > custom filters > all printers > OfficeJet Pro 8610 (network).  FAX and scan to work. I can access the printer through the built-in Web server.

  Suggestions or help?

  My environment: I-7 desktop PC running Windows 7 Pro SP1 with all the current patches. 8610 printer connected via ethernet using the static IP address.

  Printer: driver 13.33.0.2473 software 032.000.090.45518 firmware FDP1CN1416AR

  Fixed a problem. I created a new user (account) Administrator profile and found that I was successfully able to print to the 8610 since all Office 2007 applications.

• OfficeJet Pro 8610 - answering a call by phone, and then receive a fax remotely

  Hello everyone

  We just purchased and installed a Pro Officejet 8610 as a fax on our home/office phone line.

  The phone line also receives regular calls and a phone is connected to the line BUT 2 FLOORS above.

  Is it possible to receive a fax after having responded to the call from the phone?

  If the phone was near the Officejet we can start the fax by using the touch screen, but this is not the case.

  We had a standard fax machine (Sharp UX-238) that can be started remotely directly from the phone that answers the call simply typing "5."

  (see also http://files.sharpusa.com/Downloads/ForBusiness/DocumentSystems/MFPsPrinters/Manuals/MX6240N_7040N/c...

  One wonders if similar behavior or is available on the Officejet Pro 8610.

  Hello

  If yo, pick up the phone and hear a fax sounds, "123" from your phone dial, and which should cause the fax answer the call.

  If you do not see this response, make sure that the Mode of Error Correction is enabled in the printer setup and check again:

  1. On the printer Panel, drag the screen to scroll to Setup and then press the Setup icon ( ).

• OfficeJet Pro 8610 - error setting up Fax Wizard I don't use a proper phone cord

  I have a single line by Time Warner Cable telephone system that is a set which includes the cable TV, internet connection of road runner and digital phone. I use a system of wireless phone with a stand-alone answering machine which works very well.

  I'll just put up my new printer Officejet Pro 8610 and crossed the Fax Setup Wizard to use my voice single line telephone and fax system just as I did with my old HP Multifunction printer it replaces.

  Everything seemed to connect and to work very well when one had the Fax Wizard to perform the test at the end of the installation procedure. As a precaution, I ran the consecutive times to test with the answering machine turned on and turned off and twice he spent in all categories, and once it failed to indicate that the phone cord was not the right kind.

  I used the RJ11 cable supplied with the printer, but it wasn't enough long reach the phone in the wall jack that I connected an additional RJ11 cord so it would reach. So the two cords to have only 2 pods as they should.

  I am trying to determine why I get together and pass and fails with the same set up?  If I need one RJ11 telephone plug cord in the wall to the printer?  Or am I running a subsequent wizard test too soon after a previous?

  I would appreciate any comments or suggestions about the reason that I feel this inconsistency.

  Thank you

  Hi coollx,

  Welcome to the HP Forums!

  I understand that your HP Officejet pro 8610 is indicating that you are using the wrong phone cord. I'm happy to help you with this problem of Fax!

  It is possible that what you need is a cord of unique phone from the telephone jack in the wall to the printer.

  I recommend to read these faxes guides:

  • How to connect your fax HP to a line ISDN, ADSL, PBX or VoIP device.
  • Can't send or receive faxes.

  I hope this information helps and thank you for posting!

• OfficeJet Pro 8610: Won't auto answer

  Everything tonight.  We just purchased two HP Officejet Pro 8610 and has set up in the office, however, we found that even though we have activated the auto answer feature, or machine automatically answers.  Instead, they always ask a manual "Yes, go ahead and answer this question" a key that does not work for us because we have not often the people around these machines.

  Running a Test Fax report I got the next to a print to...

  Fax hardware Test: PASS

  Fax machine connected to the telephone wall jack Active: PASS

  Telephone cable connected to the appropriate Port on the Fax: PASS

  Using the phone cord with the Fax Type: PASS

  Tone detection: PASS

  Fax Line Condition Test: PASS

  Language: English

  Country/region: USA

  Auto answer: on

  Rings before answer: 2

  Fax paper size: letter

  Tone or pulse composition: composition of tone

  Volume Fax: soft

  Distinctive ring: simple Cycles

  Availability of recomposition: Redial

  No response recompose: no reminder

  Automatic reduction: on

  Backup Fax reception: on

  Error Correction mode: on

  Fax speed: medium (14400)

  Fax transfer: Off

  Communication error Redial: Redial

  Our header and the number have also been defined.  Right now I guess I missed something in the user manual, as is the case with the machines.  Maybe someone knows of what I missed?

  Hi RandyT9,

  I think it's related to distinctive ring setting. Have you tried to put the distinctive ring for all the rings feature and see if the printer can automatically respond?

  If you are using distinctive ring service, please refer to the user manual on the distinctive ring setting.

  If you don't use a distinctive ring service, make sure that the Distinctive Ring

  function of the printer is set to all rings.

  Hope this can help.

  Kind regards

• HP Officejet Pro 8610: HP 8610 - check printing order

  HE CAN NOT FIND 'SWITCHES' TO CHANGE THE PRINTING ORDER.

  Control Panel

  ... Devices and printers

  ... right click on the printer icon

  ......... Printer preferences

  NO option to change the order of printing on any tab

  QuickBooks Pro

  ... File

  ...... Printer installation

  ......... SHAPE: Check/cheque

  ............ Options

  NO option to change the order of printing on any tab

  This option existed.  What has changed?

  Deskjet 6980 driver is compatible with the Officejet Pro 8600 series (including the 8610) and provides the order of the pages, but also of the other missing features of the Officejet Pro driver 8610 including:

  • Order of pages
  • Resizing options, including the page scaling in percent or adjust.
  • County of copy (with Assembly option)
  • Image mirror (for printing T-Shirt transfer or stickers)
  • Watermarks
  • Tip of color (the color, Saturation and brightness, the individual sliders for CMYK tone)
  • Overspray
  • Drying time

  The Deskjet 6980 driver can be installed as follows (the instructions are for Windows 7, other versions would be similar): file devices and printers, click with the right button on the Officejet 8600, select Advanced, new driver, Next, properties of the printer, Windows Update, wait a while for the page to refresh, and then select the driver HP Deskjet 6980 (HP), OK.  It may be desirable to change the name back to Officejet Pro 8610: right click on the printer, the printer, the general properties, type the name of the desired printer, apply.  While, it may be necessary to activate the duplexer: click the device settings tab, set the duplex unit installed, apply, OK.

  Install another printer driver will have no effect on scanning applications.

• HP Officejet Pro e-all-in-8610: HP Officejet Pro 8610 - error Code: "0xc19a0013" (printhead missing or failed)

  I bought the printer (e-all-in-one printer HP Officejet Pro 8610) in January 2015.  The printer was working properly - fax, copy and scan, until two days ago.  Now, it doesn't print at all.  Received an error code: "0xc19a0013" (missing or does not have the print head).  An expanded version of the error code reads: "the print head seems to be missing, not detected, or incorrectly installed.  Error: 0xc19a0013.   The printer uses a removable printhead, HP Ink cartridges (black) 950 and 951 (cmy).  I used the diagnosis of HP support recommendations: all software and firmware for this printer is installed. HP ink cartridges are not low or empty; remove the printhead ink cartridges and reinstall them.

  There are several steps in the recommendation of troubleshooting, but I stopped to lift the printhead.  Because of my technical inexperience, and there were too many ceveats (attention, attention, proper relocation and etc..)  with the removal of the print head which could cause problems more serious.  Then, I stopped to remove and clean the print head.  Also, used the doctor to Scan printer HP for assistance. Tool to clean the printhead does not.   What worries me most with the 0xc19a0013 error code is his explanation: the print head seems to be missing, not detected, or incorrectly installed.  I can use all the help I can get to understand what is happening with the error code that I received and the resolution of the printer malfunction.

  Contact HP technical support at the 800-474-6836 for more options.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Language-country selector.

• OfficeJet Pro 8610

  Can I plug my Officejet Pro 8610 into a surge protector with multiple sockets or must it go directly into the wall jack as was the case with my previous printer a 8500?

  Hello

  You can try to hook the printer through a surge protector and to verify it works, however if the printer would not get enough power it can cause different issues such as the quality problems with the unit sanner (for example during copy, scan or fax), the error message of false as a jam of transport, network of stability or power problems problems such as no answer while pressing the power button or "standby mode".

  If you experience these issues, it will be essential to connect the printer directly to a wall outlet and it is always recommended to ensure its implementation by my experience.

  Shlomi

• HP officejet pro 8610

  Hi all!

  New to this forum... I just buy the hp officejet pro 8610 with instant ink package. In addition, I do not use the wireless instead, I am using Ethernet. Y at - he no from lessions of the forum to be able to use this printer with rather wired or wireless?

  Thank you

  Spiritual Tony

  Thank you!

  I used it like wired and I'm extremely happy with him... very easy to install and works well with all the computers in the House. Love the e-print function. This printer is ideal for individuals and small businesses.

  Thank you

• HP OfficeJet Pro 8610: HP OfficeJet Pro 8610 do not print

  Hello

  I use OfficeJet Pro 8610 as a network printer. Three computers have access to it. Two PC works fine with the printer, a - is not. The problem is the computer with Windows XP (the other two are: also a XP and Windows 8).

  I installed the drivers and software with CD. OJ8610 is visible, it is under "devices and printers".  When I try to print something I get messege that the page is sent to the printer, but later there is no reaction. There are no jobs in the queue.

  Can you provide assistance for this situation?

  It seems that my problem is solved. I did it, it's always before trying your solution.

  That's what I did:

  1. I uninstalled the drivers and the software of the instrument;

  2 rebooted in Safe Mode;

  3 restarted again and started Windows normally;

  4. connect the device to the computer via the USB cable.

  5. install the drivers - NOT to launch the HP CD, but using "Add new printer" Wizard in "printers and faxes" under the control panel (when asked for the location of the drivers, I indicated on the HP CD).

  6. I printed the test page - and it worked.

  7. then, I installed the device as a network using CD HP printer.

  8. I have test page printed successfully as a network printer using my camera.

• OfficeJet Pro 8610 X 64 8.1 win question over both sides of the pdf, Word Doc multi-page brochure printing.

  HP Officejet Pro 8610

  HP Envy laptop

  8.1 Windows X 64

  Printer will not print back of the pdf booklet by choosing the best quality.

  Get the message "Cancel printing" on printer when trying to print the second side.

  kicks then paper.

  In addition, printer does not multi make page print job when printing on both sides Word 2013

  document.  Stops at random page number, get message «Cancellation of print» print

  printer.

  Complete features uninstalled and reinstalled software by following the instructions

  by HP Support Forum's message dated 23/09/2014.  Problem

  There are still.

  Hey!

  So happy to hear that everything is in place and functional for again you!

  Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Better luck in the future and have a great day!

• HP Officejet Pro 8610 - tray 2

  I just bought a HP Officejet Pro 8610 with a 2nd A8Z70A pan. The 2nd tray is recognized on the printer but not on the software.

  I use the 2nd tray for legal-size paper.

  I've updated firmware & drivers. Not fixed.

  What should I do, I can select tray 2 printing for MS Excel?

  Hello

  Be sure to enable the second Board on the driver, then it will become available for selection:

  1. Open the contorl Panel and select the devices and printers.
  2. Just lick the 8610 printer and select printer properties.
  3. Open the devices tab.
  4. Set tray 2 installed and confirm the changes.
     Note: you can also set a form to transfer of tray for paper specific to different bins sizes, wil automaticalaly select the tray that is suitable for the specific paper size.

  Kind regards

  Shlomi

• OfficeJet pro 8610: 8610 officejet web menu configuration

  Hello

  I have an officejet pro 8610 on my network (3 computers)

  On the web interface I activated the webscan and the fax machine, but when I set the admin password it blocks everything and ask me password admin everywhere.

  How can I set Admin password for the "menu settings" but not to the menu webscan and fax?

  Thank you

  Hi @alexandros_ ,

  I see by your post that you would like to know if you can simply set a password for settings only menus on the printer.
  I can help you.

  Unfortunately, when you set up a password for the printer it affects everything. You will be prompted for the password each time.

  Good day!
  Thank you.