Windows 7 Pro RTL PC time continues to change - daily

Similar Questions

• Windows 8 time continues to change at random

  Hi all

  I hope someone can help me with the problems I'm having with my laptop. It's brand new, running Windows 8. Everything works well except the clock. The time continues to change and I'm unable to synchronize with the time Internet. Whenever I try to sync, I get the error message "the peer is not resolved."
  I haven't noticed any particular model for how time continues to change, except that if I turn off and turn on again hours later, time has not moved at all of what it was when I turned it off.
  I have searched and tried many things, including instructions in this post: http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/why-windows-store-not-able-to-connect-to-proxy/8c400732-68a1-4875-906a-cae90081dc40. I got the same error message as the user - "no time data is available."
  Any suggestions? Thank you!

  Hi Meagan,

  I ask you to try the following steps and check whether the problem is resolved:

  Method 1: run the automated troubleshooting and check if the problem is resolved.

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows

  Method 2: Synchronize with the Internet server.

  To do this, follow these steps:

  a. double click on Date and time in the bottom right of the desktop.

  b. click Change Date and time settings.

  c. click on the Internet time and click Edit settings.

  d. place a check at the time to synchronize with the Internet Server.

  e. click Update now and click OK.

  Please get back to us with the State of the question.

• HP Jet 7: Using devices on a compressed Windows all at the same time continue to load

  Hello

  I have a windows Tablet 7 flow HP (model 5701).

  I would use it for video-conferencing using a USB ethernet port and a USB camera.

  Is it possible to connect these devices to the Tablet via a USB hub, and at the same time continue to charge the Tablet?

  I have looked everywhere for information on how to do it, but have not been able to get a clear answer.    I have, it is possible, what kind of hub should I buy?

  Thank you

  Edgard

  Yes, the Plugable Pro8 works for that and there are other solutions mentioned in this thread.

• Windows 8 Pro key does not work after changing HARD drive

  I had bought a Lenovo machine without installation of the OS and installed a Windows 8 Pro (and not an upgrade).

  After activation ( laptop settings-> activate Windows ) and control, the copy of Windows has been properly activated.

  The machine worked fine for 7 months before the hard drive crashed and I had to replace it. (Without recovery).

  On installation the same Windows 8 Pro on the new HARD drive again, it shows " this key did not work." "If please check and try again or try a different key"

  Please suggest a solution to this problem.

  If my copy of Windows would have been an upgrade version, it would not have worked the first time.

  Have you bought a copy of manufacturer of OEM of Windows 8 Pro system? Because there was no full version boxes retail copies of Windows 8 Pro. The following work around to try to see if it works with your copy and then try the phone activation;

  http://www.eightforums.com/tutorials/13375-clean-install-Windows-8-upgrade.html

  Activation of the phone:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Trying to update Win 7 HP for Windows 7 Pro - at any time to update does not accept my product key

  Bought two Win & Home Premium & W7 Pro to Sam W7HP is OEM, W7Pro upgrade (a cardboard hanger). Have installed W7HP and works well. Update at any time does not accept my Key Prd. Key to sting has 25 characters + -01 at the end. I can enter 25 characters (with auto-add dashes) but when I try to enter the - 01 it won't take. Present the key without the - 01 returns a valid product key error. Tried 3 times and checked my typing with each. Would appreciate any help.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Windows Server 2012R2 - network location awareness continues to change the public domain after rebooting

  I also have this problem but I have domain controllers that are NOT part of this Hyper-V host.  If I restart the network location awareness (which also restarts the network list Service) it goes back to the field as it should.  Now when I reboot this server it will be once more put the interface / network to the public even if this Hyper-V server has been successfully joined to the domain with a static IP address.

  Now for clarification.  This Hyper-V server is NOT yet configured virtual.  The only thing that has been set up is a NIC team with two cards on Board (LAN 3 & 4 ports) and two additional network cards four port card (ports 3 & 4).  Local network connection is dedicated to LAN Port No. 1.  We also have a dedicated of the IMM port for access to the Strip.

  The ONLY time I can get this server to restart and STAY in the 'Domain' location is now if I have the PORTFAST enabled on the switch port to which it is connected.  Yes, we use STP here in our company.  This is not the first time that I had to do this, but it seems not just as a colleague claims that he didn't need to do and its technology Hyper-V server restarts fine.  I him have had check it out and he sees no difference between its servers and mine.  Still mine restarts always in the "public" unless I have active portfast.  Any thoughts?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 7 Pro 64-bit computer, can not change the sharing

  My problem is much more complicated, but I'll start with this simple question.

  While trying to see my Win 7 Pro from my Home of Win 7 32-bit laptop, I shared the C drive, the other car tie and users.

  All this while you are trying to use the Canon MP500 printer attached, also shared.

  I don't see the elements of theses on the laptop saying no permissions.

  They are on the same network of working group. Ping is OK.

  I can see all shared folders on the machine Win 7 Pro, as well on the Win 7 computer laptop and another XP machine.

  Now how the hell can I, for starters, unshare above.

  Win 7 Pro said, the help section, but I do not understand this, (using MS Explorer to get there) SEE MY OTHER SCREEN SHOT LOWER down

  YES, I know I'm on a working group, and that said home group, but surely. SOMEONE HELP. ? It's frustrating and c not easy. How do you get the new share with Menu?

  I see the screenshots do not work, but the part with tab on my 7 came with 'Advanced sharing' only.

  Hello Peterde,

  Thanks for the reply and sorry for the delay in response.

  If it is not necessary for you to share files on your computer with other users, disable file sharing.

  Otherwise, if you need to allow some users access to certain folders on your computer, you can configure permissions to allow sharing of files limited, protected by password.

  Disable file sharing

  1. On the Start menu, select Control Panel, and then click network and sharing Center.
  2. In the left panel, click on change sharing settings, advanced and then click the arrow next to home or work.
  3. Check the following settings:
     • Network discovery: Off
     • File and Printer Sharing: Off
     • Public folder sharing: Off
     • File sharing connections: use 128-bit encryption...
  4. Click on save changes.

     

  For more information, I would ask allows you to check the link provided below.

  http://TechNet.Microsoft.com/en-us/library/cc753475.aspx

  Hope the helps of information provided. Let us know in case you need more help.

• Impossible to Downgrade/install Windows XP Pro

  Hello

  I am trying to Downgrade to Windows vista Home premium to Windows XP pro, but every time I try it gives me a black screen after I press any key to boot from CD (ive let sit there for 30 minutes, nothing) it still makes a noise when I press a button but nothing happends

  Its a Pavlion HP Dv5-1124 ca

  Help is greatly appreciated.

  You have the AMD SATA AHCI driver. There are several discussions on "slipstreaming" of the driver using Nlite.Some can be model different, but use the same hardware.

  HERE

  HERE

  HERE

  Message edited by CherylG on 07/03/2009 11:56

• The clock continues to change Windows 7

  I have a HP Pavilion dv7 laptop running Windows 7 Ultimate.  The clock continues to change.  The interesting thing is that only the changes of time, not minutes and seconds.  Any suggestions would be greatly appreciated.

  Open the control panel and you check the settings for "Region and language".

  J W Stuart: http://www.pagestart.com

• HP Pavilion 15 lowered a score of 8.1 for Windows 64-bit for Windows 7 Pro 64 bit driver problem

  I just downgraded a HP Pavilion 15 Notebook, which was just recently bought with Windows 8.1 64-bit installed.

  The owners could not get with Windows 8, so they bought Windows 7 Pro 64 bit.

  After changing the option of Secure Boot UEFI BIOS, I installed windows 7 for them, installed the drivers from the site HP Web for this model of laptop, but there are a few drivers who will not not turn on.

  Product number is F8S59EA #ABU

  SYS ID card is 2163

  Intel processor Core I5-4200U @ 1.60 GHz

  8 GB memory

  BIOS Version F42 has been upgraded to F62

  But there is a PCI device in device without driver manager now, details of the error are:

  PCI DEVICE

  Hardware ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2163103C & REV_01

  There is also another error of unknown device listed, the details are:

  The unknown device properties

  Hardware ID

  ACPI\HPQ6007

  I don't know if this is related to the first error message, but I thought I'd list them here anyway.

  In addition, try to install the software Cyberlink listed on page of drivers for this laptop, Cyberlink Director Photo software, the software Cyberlink PowerDVD and PowerDirector Cyberlink software all refuse to install.

  PowerDVD and PhotoDirector gave "Software can be installed in the machine allowed" error message and PowerDirector gave the error message "is not a valid HP drive, the installer stops now.

  If someone could please help in telling me that drivers are missing, (I enter all the machine ID in the box HP drivers, pilots said it remained for this machine, installed correctly, just these some problems) I would be most gratefull and the owners of laptops would be too!

  Mushty wrote:
  

  I just downgraded a HP Pavilion 15 Notebook, which was just recently bought with Windows 8.1 64-bit installed.

  The owners could not get with Windows 8, so they bought Windows 7 Pro 64 bit.

  After changing the option of Secure Boot UEFI BIOS, I installed windows 7 for them, installed the drivers from the site HP Web for this model of laptop, but there are a few drivers who will not not turn on.

  Product number is F8S59EA #ABU

  SYS ID card is 2163

  Intel processor Core I5-4200U @ 1.60 GHz

  8 GB memory

  BIOS Version F42 has been upgraded to F62

  But there is a PCI device in device without driver manager now, details of the error are:

  PCI DEVICE

  Hardware ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2163103C & REV_01 is a card reader.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63708.exe

  There is also another error of unknown device listed, the details are:

  The unknown device properties

  Hardware ID

  ACPI\HPQ6007 is the software of HP 3D Driveguard

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4063&product=6732717&sw_lang=

  I don't know if this is related to the first error message, but I thought I'd list them here anyway.

  In addition, try to install the software Cyberlink listed on page of drivers for this laptop, Cyberlink Director Photo software, the software Cyberlink PowerDVD and PowerDirector Cyberlink software all refuse to install.

  PowerDVD and PhotoDirector gave "Software can be installed in the machine allowed" error message and PowerDirector gave the error message "is not a valid HP drive, the installer stops now.

  If someone could please help in telling me that drivers are missing, (I enter all the machine ID in the box HP drivers, pilots said it remained for this machine, installed correctly, just these some problems) I would be most gratefull and the owners of laptops would be too!

• How can I get the paper size "C sheet size" in the layout of Notepad on Windows 7 Pro 64 bit.

  Hello

  I used Notepad to format some text files in the format of paper called 'C size sheet' under Windows 7 pro 32-bit. Recently, I changed my system having Windows 7 Pro 64 bit installed, in which I am not able to find the size option "C format of paper sheet" in the notebook layout.

  Windows is updated with all the latest patches.

  Appreciate your help.

  The system configuration:

  OS: Windows 7 Pro 64 bit.

  Kind regards

  Mohamed Gonapa

  Hi Matt,

  To solve the above problem, please follow the steps below:

  Go to start--> Devicesand printers--> Microsoft XPS Document Writer--> rights, click on set as default printer.
  Open notepad---> print---> preferences--> Advanced-->---> do paper size scroll down select size C---> ok--> ok--> applies--> Print.

  It works 100% for you hack.

  Kind regards
  Vincent David

• The clock continues to change at random and contradictory

  Hello

  Time of the Pavilion dv7 - 4078ca Notebook PC operating Windows 8, continues to change at random and contradictory.

  Area is correct and if the synchronizing with a time server Internet is active or inactive, time continues to change. After synchronization with a time server Internet, the time is right for a short period, after which the weather changes.

  Battery CMOS doesn't seem to be a problem from the time system and the BIOS settings CMOS does not return to the default values.

  I can't wait to help.

  Thank you!!!

  Hey JKhashram,

  Unfortunately, you cannot exclude a CMOS battery for bad/failure on a question like that until replace you it in fact. The good news however, is that they are very inexpensive and easy to replace.

  Here is a link to the manual for instructions on replacing the battery CMOS/RTC.

  I hope this helps! Please let me know the results if replace you

• Upgrade to Windows 8 Pro fails miserably, why?. What can I do to make sure it works this time.

  DV6 - 7247cl just bought 1 week ago, I bought windows 8 pro upgrade pack and backed up my windows 8 base images.  When to perform in-place upgrade today ' today-all seemed well until it has restarted and came to a start with three boxes menu: Windows 8 on volume 4

  Windows 8 on volume 4

  Installation of Windows

  I tried all 3 and each of them became all black and then blue screen, your computer has encountered a problem....

  I went into recovery options and each tried and nothing worked.  The last option that I came was to make Factory Image Recovery, I need Windows 8 Pro because I join domain and use Bitlocker and start with the virtual hard drive.  Why it failed, would it secure boot or UEFI.  Please tell me what I can do to get this update to work.  The upgrade looked like it was working but then wouldn't boot into Windows more after the reboot.

  Sorry for the experience with the support of Microsoft. I wasn't expecting that. Let us try the old process to restore the system to the factory settings, uninstalling unwanted applications and then create an inplace upgrade to Windows 8 Pro. Let's see what happens this time.

• Windows XP Pro SP3, OEM in Dell D600 "not responding" on every article, every time, all the windows

  My DELL D600 has OEM Windows XP Pro SP3, and netframeworks all or almost suddenly started not ANSWER DO NOT each time. I don't know what went wrong, it's driving me crazy. I can't afford to upgrade.

  I tried the fixit from Microsoft online, no luck.

  I uninstalled a few programs, perhaps thinking it's too full. Still no luck.

  Whenever I use any folder window, or any element of the queue at all, the same thing happens, every time. "Not responding" delays on the window or the desktop contains the item. Must hit Ctl + Alt + Delete at least twice, if not 3 - 4 times.  Each 'entry' lasts for a number of at least 26 and often much longer.  Basically, Windows is not very functional.

  I have two OEM for Dell, not sure that I put here (I was wondering if I should repair-installation Windows), but worried to destroy my Office Server installations that have 3 WordPress developments.  I can't afford to destroy the.

  Any ideas to FIX this would be greatly appreciated.

  Thank you.

  Good, minor success.

  The returned quickly file number, but a re - check with Roguefix showed, it was not clear, no change in System.

  I therefore decided to start uninstalling things, hoping to uninstall accidentally the culprit.

  First I stripped all the netframeworks and the SPs.  Has failed, file number remained.

  I then started to uninstall programs. After uninstalling programs a half-dozen, suddenly THE FILES ARE WORKING AGAIN!  Don't ask me why.

  Then, I rebuilt my netframeworks and SPs.

  Then, I clicked to access Microsoft Updater to get up to speed.

  IT WILL NOT BE UPDATED.  Failed! is what I get.  It says the software needed TO be updated is not in my HD and offer a download. When I try to download and install failed!  It will be not even installed that.

  This goes back to the same "cause" - for reasons unknown the last 4-6 weeks, installing any updates in my DELL D600 Windows XP Pro OEM.  Initially, they install.  Then begins the phase were some updates installed, others down without reason.

  Then, no updates would be installed.  That was BEFORE I plucked executives trying to solve the issue of records.

  It is not even asking me to install the real test happened before, I think that.  I think it was in August 2013 or almost.

  I'm desperate to get the updates, if you have an idea on how to help me.

  Thank you.

• Usually any time Windows 7 Pro runs on my system - looking for a refund

  Hi upgraded / downloaded Windows 7 Pro (does not work on my system) in any time looking for a refund, contact/phone numbers ring true as committed then

  the location of Ms cutting is MS Ireland.I; ve been trying to get in touch by phone and live chat will open in the new tab, but nothing is out of luck! 2 hours by train irritating.

  must be an easier way! any body has an email address, they seem to have covered as well.

  Former title: support/restitution

  Salmon salvation,

  Thanks for joining us on the forum.

  What version of Windows 7, you try to upgrade to Windows 7 pro?

  Do you receive an error message/code? If Yes, what is the exact error message/code?

  If you provide us with this information we can try to help you to upgrade. But if you still want to refund the product you can click request a return in the link below and follow the instructions on the screen and see if you are able to return the product.

  Sales and support

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards