The clock continues to change at random and contradictory

Similar Questions

• The time on the clock continues to change at the wrong time.

  The time on the clock continues to change at the wrong time.

  First of all, make sure that your clock is set to the correct time zone.

  Right click on the clock.

  Select adjust date and time.

  Then select change time zone.

  If your time zone is correct, you may have a bad CMOS battery but you can get around it by having the system more often with the internet time synchronization.

  1. Go to start
  2. Success and type task entry
  3. Click the arrow on the left next to the Task Scheduler Library
  4. Click the arrow next to Microsoft
  5. Click the arrow next to windows
  6. Click the folder to synchronize the time
  7. At the top right click on Synchronize
  8. Click on properties
  9. Go down and check run with highest privileges
  10. Click the triggers at the top tab
  11. Double-click the trigger that is listed in the box of
  12. On the top of the page task Begin at startup
  13. Uncheck delay task
  14. Check Repeat task (change in 5 minutes)
  15. On the right hand side change indefinitely the duration of
  16. Click OK twice

  Exit Task Scheduler

  Turning the computer off and see if it works

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I hope this helps!

  Nice day.

• The clock continues to change Windows 7

  I have a HP Pavilion dv7 laptop running Windows 7 Ultimate.  The clock continues to change.  The interesting thing is that only the changes of time, not minutes and seconds.  Any suggestions would be greatly appreciated.

  Open the control panel and you check the settings for "Region and language".

  J W Stuart: http://www.pagestart.com

• My clock continues to change at the incorrect time after I turn it off.

  I have to change constantly and I also change the synchronization Web site because they did not help. Can some give me a few tips pleaseee?

  If your pendulum returns to the BIOS initialization when you turn off your computer. either the motherboard CMOS battery is discharged or failed and must be replaced (in this case, all your BIOS settings will return to default values) or the clock on your motherboard is faulty and you need a new motherboard - or simply reset the clock whenever you restart.

• Windows 8 time continues to change at random

  Hi all

  I hope someone can help me with the problems I'm having with my laptop. It's brand new, running Windows 8. Everything works well except the clock. The time continues to change and I'm unable to synchronize with the time Internet. Whenever I try to sync, I get the error message "the peer is not resolved."
  I haven't noticed any particular model for how time continues to change, except that if I turn off and turn on again hours later, time has not moved at all of what it was when I turned it off.
  I have searched and tried many things, including instructions in this post: http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/why-windows-store-not-able-to-connect-to-proxy/8c400732-68a1-4875-906a-cae90081dc40. I got the same error message as the user - "no time data is available."
  Any suggestions? Thank you!

  Hi Meagan,

  I ask you to try the following steps and check whether the problem is resolved:

  Method 1: run the automated troubleshooting and check if the problem is resolved.

  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows

  Method 2: Synchronize with the Internet server.

  To do this, follow these steps:

  a. double click on Date and time in the bottom right of the desktop.

  b. click Change Date and time settings.

  c. click on the Internet time and click Edit settings.

  d. place a check at the time to synchronize with the Internet Server.

  e. click Update now and click OK.

  Please get back to us with the State of the question.

• For now I use PSE 8 and the adobe bridge for classification, stars, keywords can I keep all my work on the bridge if I change to PSE14 and the Organizer?

  Hello

  For now I use PSE 8 and the adobe bridge for classification, the stars, the keywords

  can I keep all my work on the bridge if I change to PSE14 and the Organizer?

  Thank you

  Exit the bridge and try to revive all by pressing the three keys Cmd + Shift + Optn (Cmd + Shift + alt)

  Choose to re - set prefs.

• I use a mac and would like to buy the package of Lightroom.  I had the trial and it was fine.  I was enrolled in the Belize and I get an error message saying that the country is not supported.  In the United Kingdom, I changed my region and I still get th

  I use a mac and would like to buy the package of Lightroom.  I had the trial and it was fine.  I was enrolled in the Belize and I get an error message saying that the country is not supported.  In the United Kingdom, I changed my region and I still get the same error message?

  Hello

  Try to subscribe through pricing and membership creative cloud plans | Adobe Creative Cloud

  Hope that helps!

  Kind regards

  Sheena

• HP LaserJet P2055x: The status bar Configuration changes itself "random" (HP LaserJet P2055x)

  Dear HP support,

  We have several HP LaserJet P2055x with tray 3rd in an office of the customer.

  Each printer has a paper sizes A6, A5, A4 configured (inside and out).

  From time to time (randomly, but usually about weeks) one or two printers are changing their <->tray paper size configuration (done web gui and see there too). That is an old configurazion of (from 1 to 3) 'A6, A5, A4' going to "A4, A5, A6" or "A5, A4, A6.

  The two affected flatbed printers different configurations:

  1 A6, A5, A4

  2 A6, A4, A5

  they are on the same network and configured on Mac OS X computers.

  My first thought was that the 3rd tray (extension) has established relationships that got "lost little time' by the movement through the cleaning stuff - leading to this"automatic reconfiguration"of the printer.

  What can we do to "fix" / "hard wire" the bins of a document format?

  Thank you very much

  Niels Dettenbach.

  Hello

  Thank you for your comments. We are happy to help you.

  I think that firmware will fix two issues that the format of the trays should not change randomly. So once we have upgraded the firmware should fix the two issues of the printer.

  Please update and let us know.

• priority for the program continues to change running

  Why would a program a priority continue to change while it is running?

  I set the priority of the program in the 'normal' Task Manager, but it will change to 'low '. I have observed this failover so that the Task Manager is open and running the program.

  Hello Mindsclay,

  Thanks for posting your question in the Microsoft Community. We are happy to help you.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. This problem persists with all programs?
  2. Are what program you referring?
  3. Significant changes were made to your computer before this problem?
  4. To save you the priority after changing?

  You can have a quick glance at the picture below to change the priority of a program in the Task Manager.

  

  Please respond to this answer we will be happy to help you.

  Thank you.

• Download the file: continue to change the display settings

  Hi all

  These days, he continues to be for no reason.
  I put the display settings to my download folder. The list, by group type, sort by last modified.
  However, without one apparent for this folder, other than asking to display its content, the undisciplined directory view my files in a detailed list with the default sort.

  My path to the download folder have been changed from the original.
  As my Windows is not in English, the name of path is also different from the display name (don't think that will have an impact as the path name is different from the name in all versions of windows-English).

  The setting for the folder is 'General Elements' (in properties/customize).

  Does anyone have the same problem before? In my view, is not only in the download folder.
  Any idea to fix it? I tried using desktop.ini, because I used to do it a lot before, but nothing has changed in this file, when I tried to change the display using the browser configuration.
  As I don't remember the setting of desktop.ini, I looked in the documentation.
  Here: http://hwiegman.home.xs4all.nl/desktopini.html
  And here: http://msdn.microsoft.com/en-us/library/windows/desktop/cc144102%28v=vs.85%29.aspx
  I changed the setting to 3 Vid == Mod.
  As the problem appeared at random times, I do not know if my problem is solved :/

  I have of course a question of law in the desktop.ini file.
  If anyone has any idea... =)

  I had a similar problem.

  Certain way when you change the name of the folder.  He lost the file that held the parameters.

  I found that the easiest way is to rename the damaged library, I recommend

  "Temp of library".  Then create a new library with the name of the library, in your case downloads.

  or whatever you want to call it.

  Then in the pane left right click the new library.

  And then in the left pane right-click the library damaged, then copy the 'Library locations' by using the 'include a folder"in your new downloads folder.

  Close windows Explorer.  Reopen and verify that your settings are as you wish.

  You can delete the corrupted library.

• What is the best way to change this program and to read 1 sample of each channel?

  The initial program was conducted with NOR-traditional DAQ. I change it to DAQmx the best I could. The program, he is already the application of voltage to generate code (Daqmx Write.vi). But I have problems with the acquisition of tensions, give me readings rare (Daqmx Read.vi) I don't know if I have to make a (Daqmx start Task.vi) for each channel in the program or if I can make it work with a single. Notice I have no significant changes a lot because this program is already running in another lab, and they send us the program so we had no problems so much but rather than get the BNC-2090, they got the BNC-2090 is who uses DAQmx instead of the traditional. If anyone can help?

  A BNC-2090 is just a connection block.  It has no effect on the question of whether you should use traditional DAQ or DAQmx.  Which is determined by the DAQ card that you are connected to the terminal block too.

  You can refer to this document, differences between the BNC-2090 and connector BNC-2090 blocks has, but it's just saying to change the label of the Terminal Board to reflect the new DAQ cards.

  What problems are you having with the new VI you just posted?  You get an erro rmessage?  I don't know what mean "rare readings.

  You really shoud look at some cases DAQmx in the finder of the example.  Some problems that you are experiencing, is that your blocks of data acquisition are all kinds of disconnected.  Generally, you should connect the purple wire from your work function of creation, through the beginning, reading or writing, then the narrow task.  Many of your data acquisition functions are sitting there on the small islands now.  You should also connect to your son for the error.

  With DAQmx, you should be combining all your analogue channels in a single task.  It should resemble Dev0/AI0... AI7.  Then use a sample of channel 1 N DAQmx read to get an array of the readings, you can then use array of index to break.

  Other things you need to do is to replace the structures sequence stacked with flat sequence structures.  Turn on automatic growth for some of your structures such as loops.  At the end of the day, you might find, you can eliminate some of the structures of the sequence.

• I need to restore my windows xp system, but when I run the system restore program, I get the message that no changes were made and to choose another restore point, but all have the same results. Why?

  the system restore program is activated.

  A restore point is selected. program is activated.

  It runs and after system restart, it is said that no changes have been made, run another restore point.

  Same results every time!

  Help!

  Hi larryburrage,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3 do you have Norton installed on the computer security software?

  If you use Norton Security software on the computer then refer to the article below and check if it helps.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  If you don't use security software Norton then temporary deactivation of security software installed on the computer and check if it helps.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• IP address of the printer continues to change

  A large part of the time that my wireless printer is offline compared to computers on my local network, because IP address has been changed to a value other than what the computer thinks it should be.  So I have to figure out what is the IP address of the printer, and then change the printer on the PC port to point to the correct address.  If this happened only rarely, or if I could easily remember the steps I have to take to remedy, I suppose that this would not be a big deal.  But it happens a lot and I am old and alzheimery.  So my question is: How can I get the router to assign the same IP address to the printer, all the time?

  I have a LinkSys WRT54G and just updated the firmware to V4.21.1.  I went through all the settings on the router via http://192.168.1.1 but don't see anything that would reserve specific addresses for specific devices.  Is this possible?  I need to have the DHCP Server enabled, because some devices come and go on this network.  Devices that are not controlled by the DHCP server can co-exist with devices that are?

  TIA
  * beep *.

  Your printer must have a STATIC IP address, and Yes, the DHCP server on your router remains active.

  Open the page of the http://192.168.1.1 router

  Go to status then LAN, click the DHCP clients table.

  Find the IP address of your printserver.

  Now, log in to your printserver page

  You can see a static or fixed IP address. Assign an IP address, but not of this range from 100 to 149

• Wallpaper continues to change at random

  Original title: wallpaper

  I have Widows Vista. I use personal photos and pictures I find online as my desktop wallpaper. Here lately, whenever I have use such a picture... a few hours later or the next day when I wake up, I notice my wallpaper was changed back to the previous! NOTE: If I use a background from WEBSHOTS, it does not change! I'm tired of always having to reset my desktop wallpaper to change again only for her. Can someone help me please? !! Thank you!! :)

  Hello
   
  (1) don't you make changes to your computer before the problem?
  
  (2) when the wallpaper and theme changes it? During hibernation?
  
  (3) do when you're working on an application? A third-party application could be causing the problem.
  
  (4) using a laptop? There are times that your laptop battery is low and the screen goes to the basic theme.
   
  This usually occurs on laptops according to adapter connected or if your laptop runs on a battery. To save a few, it usually changes the wallpaper on your computer automatically.
   
  If you do not want to change the wallpaper or themes, make sure that you have not set the time to change the wallpaper and theme or never put if you can.
  In the meantime, follow these steps.
  
  
  Step 1:
   
  You can follow the steps above that talks about a similar problem. However, this one is for Windows 7, which should also work for Windows Vista.
   
  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/6ead49cc-6c56-42c6-AD6D-b17175cb643c
  Step 2:
  In addition, disable Webshots and change the wallpaper and check if the wallpaper changes. It seems that the problem is caused by Webshots.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• The clear theme App change to dark and Vice Versa

  Hello

  I have seen in a few 10 BlackBerry apps now, but can't find any documentation on how to do it.

  I wonder if it is possible to add a drop-down list, where the user can select the color theme they want (light or dark) and then when they restart the color theme application takes effect?

  If there is a sample or if you know how do it so it would really help if you could share.

  Thank you

  Hello!

  Theme can be changed by setting an environment variable, this thread has the details and a link to the sample project:

  http://supportforums.BlackBerry.com/T5/native-development/change-theme-edit-quot-bar-descriptor-XML-...