Windows 8 time continues to change at random

Similar Questions

• The clock continues to change at random and contradictory

  Hello

  Time of the Pavilion dv7 - 4078ca Notebook PC operating Windows 8, continues to change at random and contradictory.

  Area is correct and if the synchronizing with a time server Internet is active or inactive, time continues to change. After synchronization with a time server Internet, the time is right for a short period, after which the weather changes.

  Battery CMOS doesn't seem to be a problem from the time system and the BIOS settings CMOS does not return to the default values.

  I can't wait to help.

  Thank you!!!

  Hey JKhashram,

  Unfortunately, you cannot exclude a CMOS battery for bad/failure on a question like that until replace you it in fact. The good news however, is that they are very inexpensive and easy to replace.

  Here is a link to the manual for instructions on replacing the battery CMOS/RTC.

  I hope this helps! Please let me know the results if replace you

• Windows 7 Pro RTL PC time continues to change - daily

  So yes I did a search on the web and they all said basically the same 'battery CMOS,"time zone is wrong, well that is NOT the case, time ahead of 4-5 hours. It is a daily practice since the last set of updates from Ms.

  

  

  So, what gives?

  OK, so I finally made a decision and I restored my PC to a date about 12 days. I will mark it as resolved, but if it happens again I have will reopen its doors...

  Thank you

• Wallpaper continues to change at random

  Original title: wallpaper

  I have Widows Vista. I use personal photos and pictures I find online as my desktop wallpaper. Here lately, whenever I have use such a picture... a few hours later or the next day when I wake up, I notice my wallpaper was changed back to the previous! NOTE: If I use a background from WEBSHOTS, it does not change! I'm tired of always having to reset my desktop wallpaper to change again only for her. Can someone help me please? !! Thank you!! :)

  Hello
   
  (1) don't you make changes to your computer before the problem?
  
  (2) when the wallpaper and theme changes it? During hibernation?
  
  (3) do when you're working on an application? A third-party application could be causing the problem.
  
  (4) using a laptop? There are times that your laptop battery is low and the screen goes to the basic theme.
   
  This usually occurs on laptops according to adapter connected or if your laptop runs on a battery. To save a few, it usually changes the wallpaper on your computer automatically.
   
  If you do not want to change the wallpaper or themes, make sure that you have not set the time to change the wallpaper and theme or never put if you can.
  In the meantime, follow these steps.
  
  
  Step 1:
   
  You can follow the steps above that talks about a similar problem. However, this one is for Windows 7, which should also work for Windows Vista.
   
  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/6ead49cc-6c56-42c6-AD6D-b17175cb643c
  Step 2:
  In addition, disable Webshots and change the wallpaper and check if the wallpaper changes. It seems that the problem is caused by Webshots.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• My password continues to change at random.

  Will that you jerks stop changing my password I need to hire someone to fix your pathetic trash. I AM BLIND AND DEAF WILL YOU JERKS STOP CHANGE MY COMPUTER WITHOUT NOTICE OR COMPENSATION?

  original title: password

  Sorry, but Windows does not change your password. Whoever set it up yourself or your computer's protection and responsible management of password.

• Windows file - sharing continues to change the IP address

  Access my mac to a Windows files using Windows file sharing option. I usually map a drive as

  
  my-computer-name\share

  and it works very well, though some days it does not work and I need to enter an IP address or a different computer name. When I look in the config of mac, it says

  "Windows users can access your computer at smb://172.xx.xx.xxx.

  or

  "Windows users can access your computer at smb://someothercomputername.

  I have a new IP address every day I log on the office network (dhcp), but I should be able to use my computer name to map a drive.  My merge network setting is NAT.  All this experience?

  Thank you

  Andrew

  In the Windows virtual machine, go to a command prompt and type "ipconfig" (without the quotes).  The IP address of the gateway that is actually the virtual NETWORK card that Fusion creates on the Mac.  Therefore, replace the number with what your gateway 172.x.x.x number.  This gateway number does not change.

• Windows 8 continues to change my power randomly plan options

  Windows 8 continues to change my options of power plan randomly (i.e. when to turn off display/go sleep). They will remain the same to slightly toward the bottom power cycles and then will change randomly to never sleep/turn off the display.

  Use Procmon.exe

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There may be a scheduled task (winsat) which the system shutsdown when it is in idle state for the period of the exit ramp designated.

• Bridge continues to change the selection of the sort each time that I reopen it the Bridge window... WHY?

  Bridge continues to change the selection of the sort each time that I reopen it the Bridge window... WHY?

  I continue to get "sort by modified date" but each whenever I open it a window that it is for manual selection.

  I searched the preferences but impossible to find something to help.  It didn't used to do this...

  John

  Well, I solved the puzzle myself.

  I noticed that somehow a stray .psd file was stuck in my side bar of the Mac Finder.  Don't ask me how it got there.

  At the beginning I couldn't delete it – until I tried a Mac forum and they suggested I hold down the command key and drag it off... to poof!

  It worked.

  And when I went back to bridge - now the bad behavior disappeared!  And when I close the window Bridge and reopen - the choice to "classify" same home!

  Yay... it's a small step for me, and one small step for computerkind.

• Windows continues to change user profile folder

  Hi all
   
  I'm facing a real headache. My computer continues to change user profiles folder every restart 2 or 3. For example, my user name is MSF\Bob. The user profile folder has been C:\Document & Settings\Bob. After a restart, Windows create a C:\Document & Settings\Bob.MSF then Bob.MSF.000 and Bob.MSF.001 folder and so on.
   
  Someone has an idea why this is happening and how I can prevent this?
   
  I thank very you much in advance!
   
  Best regards

  Easy question to answer.  You simply have a corrupted profile.

  When Windows detects a corrupted profile, it automatically generates a temporary with names profile as you describe.  Usually, these profiles are deleted when you connect your computer turned off, but not always.  The solution is quite simple.  You just need to recover your corrupt profile.   There are two general approaches.  One is to do a system restore to a point in time before the profile was first damaged.  The other usually involves the creation of a new user and moving profile data on to the new user (you may reset some of your settings).  To do this, choose one of the following articles and follow through:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473>

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  HTH,
  JW

  PS: Corrupt profiles are almost always accompanied by alteration of the disc as well.  After your recovery, perform a check disk (chkdsk) with the "/ R" or "/ F" option

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

• The time on the clock continues to change at the wrong time.

  The time on the clock continues to change at the wrong time.

  First of all, make sure that your clock is set to the correct time zone.

  Right click on the clock.

  Select adjust date and time.

  Then select change time zone.

  If your time zone is correct, you may have a bad CMOS battery but you can get around it by having the system more often with the internet time synchronization.

  1. Go to start
  2. Success and type task entry
  3. Click the arrow on the left next to the Task Scheduler Library
  4. Click the arrow next to Microsoft
  5. Click the arrow next to windows
  6. Click the folder to synchronize the time
  7. At the top right click on Synchronize
  8. Click on properties
  9. Go down and check run with highest privileges
  10. Click the triggers at the top tab
  11. Double-click the trigger that is listed in the box of
  12. On the top of the page task Begin at startup
  13. Uncheck delay task
  14. Check Repeat task (change in 5 minutes)
  15. On the right hand side change indefinitely the duration of
  16. Click OK twice

  Exit Task Scheduler

  Turning the computer off and see if it works

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I hope this helps!

  Nice day.

• Continues to change the time in the taskbar!

  The time in the right corner of the Bureau de change at random-
  forward or backward. I have reset it and the next day or so it has changed.
  For now, it says 21:30 and its really only to 06:30

  I've only used my new Asus PC with Vista 64 bit sp1 for all
  3 months and I hope that Windows 7 will help some of the issues Im having!

  Instead of Photoshoping & Flickr.com... Its answers & Troubleshoting!

  Hello

  If it changes when you restart, then the BIOS time is incorrect or the CMOS battery is dead. You can access the BIOS on an Asus Board by pressing as soon as the system is turned on. The weather is usually on the General settings area. If it fails after reboot, then this is the indicator that the battery is dead. If this is the case, you will need to replace it, a fairly simple process. The battery is about the size of a US nickel and easily found on the motherboard. Replacements are found in many electronic, Department and hobby stores. Make sure that the system is unplugged when you remove and replace.

  For information to help you understand what happens, Windows (Vista) Gets the time from the system BIOS when a system is introduced first, then uses its own mechanism, including the synchronization process, at the time. Problems with the initial time are generally attributed to the time of BIOS, while problems with the maintenance of time are generally related to a timing issue (connectivity or firewall) or a software conflict (antivirus software more often). Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• The clock continues to change Windows 7

  I have a HP Pavilion dv7 laptop running Windows 7 Ultimate.  The clock continues to change.  The interesting thing is that only the changes of time, not minutes and seconds.  Any suggestions would be greatly appreciated.

  Open the control panel and you check the settings for "Region and language".

  J W Stuart: http://www.pagestart.com

• My asus computer continues to change time and date

  My ASUS U50F/Windows 7, 64 bit version continues to change time and date. Sometimes he changes a day, sometimes is two or more days to come, but after a few months, it resets the date back to 2009. It seems that a lot of people have the same problem as me. Some suggest it is the BIOS battery, but that's not the problem. I got my computer some time in 2010, and well enough it has been the same since.

  Sometimes, the problem is more common, and sometimes it goes on for a few months without at all what's happening.

  Any input will be greatly appreciated, but please don't say I need to change the BIOS battery, cause it is not the problem.

  Thank you

  Hi Edward Aguilera,.

  Try the steps suggested by Kevin D Souza from this link and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/date-and-time-keeps-changing-in-Windows-7/b2a07875-CACE-48af-9a4f-47210ad430b6

  Response and let us know the status.

• my computer continues to change the date and time

  my computer continues to change the date and time even after I set it correctly. I am running windows 7 Professional. Thank you

  Hello

  ·         Since when are you facing this problem?

  ·         Did you the latest changes on the computer before this problem?

  Method 1:

   

   

  The date and time in the BIOS settings may be incorrect.

  Important: Change BIOS (Basic input output system) /(CMOS) complementary metal oxide semiconductor

  Settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can see this:

  
  Incorrect time is displayed on 64 bit versions of Windows 7 or Windows Server 2008 R2 after upgrading on-site

  http://support.Microsoft.com/kb/2001086

  Method 2:

   

  I suggest you replace the CMOS battery. If you are not comfortable with that, then I suggest you to contact the manufacturer for assistance.

• Why FireFox continue to change the window by clicking on another program?

  I've upgraded to FF 8 recently. When I start it and go to, let's say, Gmail (in the window), and then open a different browser window (window B) to go, say, Facebook, if I click on another program like Live Messenger or even a reduced window of another window in FF program always changes. For example, I watch window while B is open. I click on the message box Live and B window changes. I click A to return to this window, then click on the box again and B back appears. I can't seem to stay out of no matter how many times I try.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes