Windows 7 own re - install, don't delete old partitions

Similar Questions

• Downgrade from Windows 8 to 7 made by shop - delete the partition?

  Hello

  Thanks in advance - not found similar topic.

  Purchased a new HP laptop. Store for me Windows 8 has by mistake (spec said 7). I brought and they were down to 7 for me. BUT now, there is a 20 GB D: partition. I cross that I asked them to strip 8 out completely. Now, things are slower.

  The problem is that I didn't know before the next day. I'm now across the world not near computer stores.

  Can I just remove this partition? Sorry, but I'm not technical enough for this previous messages.

  Thanks again

  carleea

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment.

  Any consumer HP computers ship with a factory specified operating system installed on them. If the store had to change the operating system to your application, they installed the OS and all need drivers properly? They provide you with a legitimate copy of Windows 7... including the COST of Microsoft with the Windows 7 product key? They create the need Windows 8 HP recover Media? If they do not have to do everything above, I wonder about their motivations and ethics.

  Please click the White Star of KUDOS to show your appreciation

• Is it safe to delete the partition OSXRESERVED? because it is still there after the installation of windows 10

  I recently got a MacBook Pro 15 "2015 model retina running MacOSX 10.11.5 El Capitan.

  My steps for installing Windows 8.1:

  Create a. ISO file from DVD installation disc and save it. ISO on a USB Flash drive.

  run bootcamp and run the. Location of the ISO on the usb flash drive.

  The SSD partition

  and then it reboot and the windows installer is on and I finish installing Windows 8.1

  then the program to install bootcamp drivers intervenes and installs the drivers

  then it restarts and I upgraded towing 10 Windows later and update the bootcamp drivers

  Then I start to Mac OS X, but the OSXRESERVED partition is still there.

  And when I restart by pressing the option key, I see 1 Macintosh HD but 2 displayed Windows disks

  Is it safe to delete the partition OSXRESERVED?  I read online that deleting it will cause 10 Windows do not to start over.

  Or should I leave it alone?

  Bump

• Bootcamp deleted missing partition, but can not recover the partition space

  Tried to install 10 Windows via Bootcamp on my Mac. First, I formatted the bootcamp partition. Then I got the following message: could not create a new partition or locate an existing one. For more information, see the Setup logs files.

  

  I tried five times with Bootcamp installed Windows 10. Then I advice to delete the partition and create a new. So I did. Still did not work. When I rebooted my mac, 50 GB missing as you can see here:

  

  I tried to restore the partition, but there is no possibility to do so, as you can see here:

  

  I read so many posts that I don't know what to do anymore. I don't mind factory reset my macbook, but it will restore my lost partition as I probably only erase the 450 GB instead of the 500 GB SSD?

  I read in several messages (this one in general: Bootcamp Partition missing during startup) that this information might be required, so I added from the outset:

  diskutil list:

  

  Cs diskutil list:

  

  sudo TPG - vv - r see the/dev/disk0:

  

  sudo fdisk/dev/disk0:

  

  
  

  I hope someone can help me restore my 50 GB, I lost. Even once, I do not fear factory reset my macbook if that's the best way to solve this problem!
  

  Can you use doesn't have windows via bootcamp 8.1 installation as reference to reclaim your disk space?

• I can't install the new program in my laptop and delete old programs, get the error message "windows service install is not installed correctly.

  I have problem with installer in windows vista, I can not install the new program in my laptop and delete old programs.

  I can't update windows vista.

  Help me fix my laptop.

  Solve the problem. I reinstal windows vista, I have install microsoft security, I don't use antivirus hid the dangerous virus. I use more cnet.com is very dangerous.

• installed ssd, leave deleted on the old hard drive and now not appearing is not in windows

  OK, so I've put an msata ssd 120gig in my t430s and windows install when I was installing I deleted all partitions and everything in the old drive. When I get into windows via the new msata drive the old drive is not to be found and does not anywhere really... How do I get windows to recognize it? do I need to format it?

  You may need to reset the player.

• HP 14-d003tx Notebook PC: I installed Microsoft Windows 8.1 but I don't know what drivers to install.

  Hi, the trial of 8.1 windows installed on my PC laptop HP 14-d003tx expired already so I installed a new windows 8.1 Pro 64 - bit OS. I went here: http://support.hp.com/us-en/drivers/selfservice/HP-14-Notebook-PC-series/6529958/model/6753958 to check the drivers to install but I was confused because I don't know who's who or what drivers I need to install in my laptop. For example, for drivers bluetooth and wlan, there are 2 choice, MediaTek (Ralink) 802.11 Wireless LAN (WLAN) adapter and Mediatek 802.11 Wireless LAN driver card, same thing for the bluetooth and other drivers. Can you please help me that driver is compatible or drivers that I need to install in my laptop? Or how will I know that I need to install drivers. Thank you!

  Hello:

  Please see my response to your other post on the link below...

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/I-installed-Microsoft-Windows-8-1-but-i-Don-t-know-which/m-p/4964227#M288461

• I don't have language packs (LIP) in my optional updates from the Windows Update - how to install a language pack?

  I started a thread in another forum (http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/i-don), but was told to start a new thread in this forum if I still need help.  I still need some help, so I'm here.  My original post was as follows:

  My hard drive crashed. It was replaced and the outside company installed the OS for me. However, I'm in a French country and they had no English operating system share so installed the french operating system without telling me. I left it as it is that I had to install my other apps in a hurry. Now, I want to change the language of the OS in English without having to reinstall the operating system. The MS help Web site gives this page with instructions: http://windows.microsoft.com/en-US/windows/downloads/install-languages-with-windows-update, but I don't get the language packs when I click on "View available updates". How can I install the English language interface pack, if it is not displayed?

  Hello

  read this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

  you who never read another answer you completely or correctly

  you have vista Home premium and the other answer correctly indicated that you can not change the display language of vista Home premium, which is what you're tryin gto

  you will need to either buy a ultimate upgrade, in french, then download the English language pack, as already stated

  or buy a full vista Home premium in English

• Basic cache Windows install can be deleted?

  Is it safe to delete the above?

  Hello

  Basic cache Windows install could be deleted, but aware that by removing the reference to a product database cache future repair, installation of patch and patch uninstall scenarios may require your original installation media. If you have the disk space, it is recommended that you keep the available basic caches.

  For more information, see:

  The Patch Cache and freeing space

  Why Windows Installer can require as much disk space

• I installed Adobe Creative cloud on my desktop but when I open the application on your window everything goes black, I don't see any information. What should I do to solve the problem?

  I installed Adobe Creative cloud on my desktop but when I open the application on your window everything goes black, I don't see any information. What should I do to solve the problem?

  This issue may cause due to the dual graphics card on your

  Try once step below

  Right click on desktop creative cloud > run with GPU > integrated graphics.

  If the option is not available

  Try disabling the Intel graphics card from Device Manager

• Windows XP is installed on C: / and Windows Vista on E:. Is it safe to delete the partition of Windows XP? I'll still be able to boot Windows Vista?

  I have a 500 GB sata HDD and it is partitioned into 4 volume (C: E: - 97 GB, d - 122 GB, GB-122, F: - 123 Go). my windows xp is installed in the C drive
  and I recently install windows vista on the E drive.

  is - it safe format the c drive where windows xp is installed?

  If I format it will damage my system?

  original title: Dual Boot Format

  Hello

  It is not safe to remove Windows XP from drive C. If an earlier version of the Windows operating system is installed in a dual-boot with Windows Vista or Windows 7 configuration, the Windows Boot Manager program transfers control to the Ntldr program for the earlier version of the Windows operating system.

  If you remove Windows XP, you may not be able to start Windows Vista as well.

  Refer to: http://support.microsoft.com/kb/919529

  The ideal way is to reinstall Windows Vista.

  Note: Be sure to back up data before formatting the hard disk.

  See: http://windows.microsoft.com/en-US/windows-vista/Installing-and-reinstalling-Windows-Vista

• delete the partition after a failed installation of windows 10

  Hello world

  How is it possible to delete partitions, if in disk utility, there is no possibility to click on the '-' key?

  So I made a failure (several) attempts to install windows 10 on my new iMAC.

  I could download an ISO of windows and start the bootcamp assistant.

  In the last attempt of last night, I selected the bootcamp in windows installation partition, however, installing windows said it was impossible to read the hard drive.

  I then re-formatted this partition (BOOTCAMP) in the installation of windows, and after that, still could not read.

  Then, I deleted the bootcamp partition in windows and re-created a partition on "unallocated space" in the windows installation.

  Installing windows 10 still wouldn't move forward then I've bailed out and went back to OS X with the hope of turning it back on (again) by deleting partitions.

  I was unable to delete the Mac partition.

  Then, I deleted this partition (the one original bootcamp) and reformatted as OS x journaled. At least now, I can see the Partition.

  However in Diskutil, I was then impossible to delete this Partition. There is also a small partition 16 MB that cannot be erased.

  Wizard bootcamp will be past a pop up station: the startup disk cannot be partitioned or restored to a single partition.

  So I will now try to delete these partitions (the boy and the training camp original one) merge into the original and give then installing bootcamp, another go when I have a lot of energy!

  any help would be appreciated. I'm a little cautious to use Terminal command lines for fear of ruining my new computer.

  concerning

  Evan

  1. your iMac has a Fusion drive?

  2. don't mix to disk utility and Wizard of BC. They can lead to a host of issues.

  3. If you do not typos in the Terminal, they provide much more rich in detail. You have a Time Machine backup, put in place?

  4 can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Vista SP2 32-bit, Windows Update continues to install KB979683 and then re-list as a new "important update available"

  Automatic updates of Windows installs KB979683, and then in the next update checking, it is listed under "important update available". He repeated every day for three weeks.

  Under 'View Update History', he shows again and again KB979683 installation successfully.

  Under 'updates installed, he said, "no update is installed on this computer". So I can't download it manually on my desktop, uninstall the update, restart in safe mode and reinstall manually. Also, when I tried to install manually in safe mode without deleting the file, I received the error 0X8007043c.

  I tried stopping the windows update service, and then delete all files in C:\Windows\SoftwareDistribution > DataSstore and C:\Windows\SoftwareDistribution > download, then by restarting the service, but it did not help.

  I've updated and run Malwarbytes Anti-Malware 1.46 and AVG 9.0.829, but found no threat.

  I use windows, as well as automatic daily scans with AVG firewall (manual scans with Malwarebytes: daily).

  I don't know if it's important, but I'm under IE8, version 8.0.6001.18882, 256 bit zero versions updates. I have seen a recent update was available for IE8 (KB982381) but when you try to run manually, he said that the update does not apply to my system.

  Help, please!

  Thank you, Todd.

  There is a good chance that you see the effects of a (including a W32/Alureon rootkit) hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * and/or your subscription has expired since and/or the machine is not kept fully corrected in Windows Update, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows update KB951847 - cannot install

  original title: update KB951847 windows

  Why can't I install this download of windows. Windows Update won't install (KB951847).

  KB951847 is an option, not the security update. Feel free to hide it.

  1. stop the service automatic updates: Windows XP

  Start > run > (type in) services.msc > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type in) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its contents
  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselect KB951847 and hide ("don't show me this update").

  Tip: If an update of root certificates is listed in updates software optional (in the menu on the left), install it to take full advantage of enhanced Internet Explorer security, but do NOT install any other optional software , nor updates optional hardware , just hide them, too.

  4. start the automatic updates service:

  Start > run > (type in) services.msc > [OK]
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  UTC/GMT is 17:42 on Sunday, January 22, 2012

• Cannot delete the partition with windows xp a clean installation

  Hello
  Thanks in advance for any help.
  I'm doing a clean install of windows xp pro. When I get to the screen to delete the partition by pressing the d nothing happens. I'm sure start out of the cd. First attempt to do a fresh install. Any help would be appreciated

  Hi rlsajs,

  Is it a custom computer or pre-built as a HP, Dell, etc. ?
  Is your USB keyboard? If so, you may need to enable "bios powered" usb in the BIOS of your computer.
  By default, many computers are set to "Operating System" controlled USB which means that your keyboard does not work entirely until Windows has started, and you need it to work before Windows started as you go through the Setup for a new installation.
  Hope this helps and answer back with questions. If you need help getting into the BIOS of your system you will need to contact the manufacturer of your computer.
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.