Windows 7 reactivation after repair

Similar Questions

• Windows XP reactivation after virus cleaning?

  I have Windows XP home. I ran Malwarebytes Anti-malware, which finds a few articles that were infected, it is cleaned up. However, when I restarted and then restarted my computer, it wouldn't boot fully and said that I needed to activate Windows XP. I thought that the *? Activate the Windows program said that it couldn't find my internet connection to activate online, if I tried to activate by phone.  The woman on the phone said that of Activation ID that was shown on my screen is not valid (even if she has repeated verbatim back), so she said she couldn't give me a confirmation ID, and instead I had to call support. The guy he wanted my product key Windows XP, which I gave to him, and he said was valid, she couldn't give me a confirmation either ID, they are sent to another person. No #3 says that he also could not give me a confirmation ID, even if my product key was valid, unless I paid $59 for technical support. There is no way I can get a confirmation ID, given that my copy of Windows is legitimate with my unique product key, without be bounced three people at microsoft who all say that can't stop even if my product key is valid?

  Maybe there was a false positive and MBAM removed something necessary!

  Look at your most recent-log mbam and copy and paste the results in your next post so that we can see what might have happened.
  In addition, run the system restore, using a date just before your problem can probably solve your problem.

• Explorer Windows restarts after a minute arriving at log on screen or if I connect quickly the dialogue windows Explorer unhandled 0x00000000 in explorer.exe exception States: after repair of Windows XP running.

  Windows Explorer restarts after a minute arriving at log on screen or if I connect quickly the dialogue windows Explorer States of exception unhandled 0x00000000 in explorer.exe: 0CX0000005: reading location access violation) X 00000000 Code: 0XC0000005, flags: 0 x 00000000 after you run Windows XP repair. Repeated repair Windows now for the third time, repair works OK but always produces the result above!. Initially, ran SFC/scannow, he ran very well modified some files but has not fixed the problem. Now I can't run Sfc/scannow in administrator mode in a repair console or environment (cmd) receive error "Windows file protection could not initialize the scanning of protected files. The specific error code is 0X000006ba [the RPC server is unavailable]. Can not access services through msconfig in safe mode, no available tab. When I click on Control Panel in safe mode, I get an error but control then window opens I can access to the services window, but as soon as I click on any service Windows Explorer plunges a black screen with only the white inscription SafeMode visible in each of the corners. When I try to access the sound module in safe mode, I have an error message and he abandoned me in safe mode desktop. Have no tab restore field in system restore to create a system restore point. In safe mode do not log off, restart or shut down (only windows explore drops leaving the black screen with text in each corner indicating the computer in safe mode, no recorded parameters.) Tried to run scanreg.exe & scanregw.exe run, cmd, mode console repair but command is unrecognized. When I tried to run all these commands using BartePe, the States of error cannot access raw disk. In safe mode, I can access the first level for example my computer folder, but when I double click on the c drive or any other drive nothing happens!

  Access msconfig, run, cmd, Device Manager, uninstall programs etc. in safe mode.

  I can easily re - install a new OS on the C partition, but I like challenges! Is there anyone with the skill out there who can offer suggestions for this mother of all XP flaws? (apart from the installation of a new version of Win XP)

  Hi Semi_Tech,

  Step 1: Start the computer and use the Recovery Console to check for errors
  a. see to start the computer and use the Recovery Console
  b. at the command prompt, type chkdsk /f /r and press to enter.

  Step 2: We recommend that you check if the RPC Server service is running.
  a. Click Start, click Run, type services.msc and click ok.
  b. in the list of services, double-click RPC Server service.
  c. change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.

  See if the steps mentioned by '- MainFrame -' can help you to:
  See windows SFC file protection could not run a scan of protected system files

  Step 3: Check if you can start the computer in safe mode
  a. see the description of the options course in Windows XP Startup Mode
  b. connection to the administrator user account and check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen

  After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen... How do I activate windows or how can I connect windows. Once I login I can activate as I have OEM license... Pls advice

  Activation of Microsoft Hotline - (888) 571-2048 MS - MVP - Elephant Boy computers - don't panic!

• Firefox crashes 2 seconds after the start. This happened after repair upgrade to Windows 7

  After repair, update Firefox (9.0) will not work. I finally uninstalled and reinstalled without success. Following your directions of support I tried to delete my profile with partial success with a new Firefox profile would be run once and then back to an apparent after 2 seconds accident (as seen in Task Manager). After each new profile he followed the same routine of work once. Any help would be appreciated.

  Try a "clean reinstall" Firefox by removing the Mozilla Firefox installation directory before you reinstall, as explained in these articles:

  • Troubleshoot and diagnose problems of Firefox - see "Reinstall Firefox" here.
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall (De MozillaZine KB article is currently unavailable)

  If Firefox still crashes after a clean reinstall, try the suggestions in the article Firefox crashes - help out, prevent and get help fixing accidents here and, if possible, after a crash report ID, as explained later in this article.

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• December 15, 2011 updates to Windows Vista. After that automatic download and install on stop, my computer would not start up

  Original title: 15 December 2011 update of Windows Vista

  After that automatic download and install on stop, my computer wouldn't boot. I had to run Startup Repair 2 days in a row and remove the updates. They are always there to be installed when I stopped. Help, please!

  Hello

  I suggest you to see these steps:

  Step 1:

  I suggest to reset Windows Update components and follow step 2.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  After reset, you will find that Windows 8 or 9 update that must be installed.

  Try to update one by one and check.

• Windows cannot load after a failed update

  Hello

  Last night, I had some windows update. After clicking on the button closure (option 'install updates and shut down' was) logging Windows appeared with a message "Configuring Windows updates 13 1 do not plug off your system" (something like that) but the update was stuck on the 6th floor for several hours and nothing was not happening... .not yet restart, so the frustration, I plugged my PC directly. Next morning, when I restarted my pc... windows could not load, and a text screen with a message similar to this "Windows failed to load. "a recent change hardware or software update could caused this" then give the steps to insert the windows installation disc and restart to repair windows.
  Also, I was unable to restart my pc in any type of safe mode and last known configuration windows proper.
  I have my windows since abt 1 year 2-3 months. and I can't find my Windows Setup disk...
  Can I use any other windows installation disc to repair my windows.
  or please suggest me a way to recover the data store in my pc... all my important information are saved in my pc...
  Help, please.
  Thank you

  Hello Rajiv111,

  It is perfectly acceptable to borrow a CD of Windows Vista to perform operations of repair with friends.

  You will not be able to upgrade a "on-site" due to differentiation of service pack.  However, you have several options to fix when you use the CD:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• "" My Windows J.4 Center repair center is currently disabled but when I try to turn it on I get the error "cannot be turned on.

  original title: Security Center

  I had a virus to infect my computer but I'm to remove by doing the scans. I can't solve the problem of after-sales service. "" My Windows J.4 Center repair center is currently disabled but when I try to turn it on I get the error "cannot be turned on.

  Hello Barbaram1,

  Use the Windows key + R on the keyboard or click on start, select run.
  In the run box, type services.msc
  Click OK.

  Make sure that the Security Center service is enabled and started.
  Probably, you will need to click Start to start the service.
  The Startup Type should be automatic.  The status should be started.

  Let me know what happens. If the problem persists, it may be that there are residual questions of the malware infection.

  Councillor of State & progress.

  Maurice Naggar ~ MS - MVP

• Reinstall Windows Media Center under Windows 7 Ultimate after the new hard drive, installed using Microsft Windows 7 disc

  I had the misfortune I had to replace my hard drive on my Toshiba laptop after reinstalling my Windows 7 Ultimate disc, I find that I am unable

  load the Windows Media Center software. When I click on the location of the file, some files are visible, but it does not load.

  Can I use the disk window to replace or repair the Windows Media Center files without causing other problems?

  Don Winston Hills NSW Australia

  Open your Start menu by pressing the Windows key and type FEATURES in the search box. Select 'Windows turn features on or off ". When the Panel opens, expand the category "Media Features" and place a check in the box "Windows Media Center". You may need to restart after Windows reconfigures itself.

• Windows Activation failed after years of work

  Hello.

  I bought my laptop 3 years ago. There were license version installed Windows (all stickers have been in their place). Over the years I did the regular system updates. I did re-install Windows. Has no repair of the laptop. ' ' But 23.12.12 after the regular update of the system told me that my version of Windows is not allowed - my product key "is used on another laptop or has been blocked by Microsoft. When I tried to enter the key again (as suggested by web page), he said that the key was not for Windows 7 Max.

  Sorry for the quotes - Windows is in Russian.

  This seems to be the code for Win 7 Pro, as expected - that explains why the system does not accept the key.

  The probability is that the vondor deliberately obfuscated Version/edition data, knowing that they would be missing for a long time until the system has shown as non-authentique, and that they would get a higher price for a ultimate a Pro machine.

  Or maybe someone has tried to apply an Express upgrade to ultimate using the stolen key.

  In both cases, the necessary of Loader fails after an update (possibly SP1) removed some of its changes.

  You will either need to reformat and reinstall Pro, or purchase a license full for Windows7 and exchange the key in (I could not recommend trying a direct upgrade to Win8 without knowing a lot more on the system)

• I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months. But since August the year last, I am facing problem and my device hung on several occasions.

  Dear Sir, almost a year I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months, I go to 8.1 and it worked very well. But since August the year last, I am facing problem and my device hung on several occasions. I restored the device, I tried to restored on the plant but no help. Is it possible if I replace win 8 for windows 7 because I feel very uncomfortable.

  Thanks & best regards,

  Hassan jamal Shah

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• automatic repair of Windows 8 could not repair your pc

  I recently bought a new 3 TB hard drive for my computer to add to my system. I installed without a problem and has used the software that came with the drive. For reference, I added a Seagate SATA drive 3TO. I cloned my original 2 TB drive on my new drive because I want to use it as my main drive for windows. No problems showed up after it was complete. My records all use MBR and I have very little experience in creating the partitions. I have partitioned my drive and was designed to use the extra space after the 2 TB limit has been reached.

  In all cases after a few days I decided to perform a new installation of windows and my recovery disk that put back me in windows 7. My recovery partition is set for windows 7 and I started the migration to windows 8. After completing the installation of Windows 8-re, I ran the seagate software to allow me to use the extra space on my HARD drive but after restarting my computer finds the option of automatic startup and recovery States that he is unable to fix the pc.

  I tried a few different options to no effect but my attempt to enter a system restore point, I noticed the Seagate Software did a restore point so I started this earlier period.

  It is a new installation of Windows 8. I have not yet loaded Windows 8.1 as all I have is the DVD of Windows 8 and Windows 7 recovery partition. I decided to try another new facility once again with the same result. I have a 3 TB drive, which has been cloned my original 2 TB disk. My 2 TB drive is wiped with 1 single partition and my new 3 TB drive has a system partition, the OS partition and a recovery partition. In addition, I now have a portion that is not attributed, that I'm unable to access and if I activate Windows finds an inevitable auto repair with no option but to remove the Seagate Software. My question is this, can I use this 3 TB drive as my main drive and be allowed access to all the data or I'll need to come back to used my original drive as the OS drive. I would avoid using my original drive because my new drive is faster.

  This issue has been resolved itself, I have reformatted all my readers and did install a clean Windows 8. After reading on the 2 TB limit I found that changing a few settings in my BIOS allows me to use the full 3 TB in Windows 8. I tried to save the Windows 7 recovery partition which has been installed by HP, but thought to remove the partition would be the best option. After formatting the drive, everything works as expected but Windows did install 2 partitions, that I don't already know, it's a recovery of 300 MB partition and a 100 MB EFI system partition. I hope this helps someone else who may have this problem as well.

• I had windows 7 and it has been updated to windows 10. After the update, I opened a PDF with adobe reader. The sign economy is idle. When I click on save slot, it is said that he can save a blank document. Earlier, I have not any problem to save a pdf d

  I had windows 7 and it has been updated to windows 10. After the update, I opened a PDF with adobe reader. The sign economy is idle. When I click on save slot, it is said that he can save a blank document. Earlier, I have not a problem to save a pdf document with adobe reader on my hard drive. I found no updates available for my adobe reader software. Is adobe still to make the drive compatible with windows 10?

  Govind B S

  Bernd, these rights are not necessary to the reader XI. Unless the file has been secured, then it should be savable.

  I recommend that upgrade you to the latest version of the XI player that is available and if this does not work, try to run a repair installation (or upgrade to DC).