Windows 7 screen goes black

Similar Questions

• Qosmio F60-100 - after that upgrade RAM screen goes black

  Hello world
  I upgrade my RAM a g-skill 2 * 4 GB 1066 Mhz DDR3
  I have a Qosmio F60-100
  I am on Windows 7 pro N
  I checked whether they have updated bios (the toshiba soft explain to me, that there is not an update available)
  I checked if the RAM were compatible with my laptop (these have been suggested to me)

  When I put the new RAM in the laptop, in "Starting Windows", the screen goes black and the fan works hard.
  So I'm not able to install my new RAM.

  These ram are compatible with my laptop?
  What is the problem?

  Thanks so much for all those who can help you.

  PS: English is not my mother tongue, sorry about that...

  Hello

  According to your Qosmio notebook specifications can be improved up to 8 GB. The comparable memory modules are:
  2 GB DDR3-1066-PA3676U-1M2G
  4 GB DDR3-1066-PA3677U-1M4G

  I don't know that references your RAM modules but the behavior described is probably as a result of the use of non compatible modules.

• Updated to firefox9 and now when I use extension of tree style tab the screen goes black, with the exception of the "window of the tab" and the part of the screen behind him

  Update firefox9. Using tree style tab extension. Everything works fine, except that my screen goes black when in 'tab window', with the exception of the window of the tab and the part of the screen behind him. Once out of the tab section everything comes back fine, but it is rather annoying. Checked homepage for the extension and have the updated version, firefox add-on page - it also says that it is compatible. Any ideas on that?

   Am realizing pages will stay on as long as I don't move the mouse,but as soon as I do move it,black goes the screen.
  

  Ok. A installed version 1.4? Manufacturers homepage. This is apparently what caused problems. Get rid of this and installed version 1.3? Since firefox add on the pages. Problems solved...

• Windows 7 doesn't recognize as input joystick, so constantly, the screen goes black

  Unlike Windows XP (not sure on Vista), Windows 7 does not recognize he entered occurs when I use my controller. For this reason, my screen goes black every few minutes, as he would if I left the computer entirely. How can I get Windows to recognize the controller as input device, in the way that my keyboard and mouse?

  I am aware that I can just turn off the screen saver, or remember to touch the mouse every few minutes. But workaround solutions, not solutions.

  I just want to clarify the step 2 for everyone because he left me scrathing my head for a minute. Ignore the real joystick listed in Device Manager and expand Interface devices. In this list, you should see HID-compliant game controller. Make a right click Select properties, then continue to step 3.

  hope that this clears up any confusion as if I had.

• Windows Live Mail using my screen goes black

  I use Windows Live Mail. But after a while, my screen goes BLACK

  These symptoms are probably caused by your graphics card. Have you checked for the updated drivers on the website of the manufacturer of the computer? Or the Web site of the company that produced your graphics card? Some video card manufacturers have been slow to release new drivers who play well with use of hardware acceleration WLMail.

  Windows Live Mail has its own support at the Windows Live Solution Centerforums. Please address any other question you may have on one of the forums on the right side of this page. You are probably asked to give your version of WLMail and Windows so that the answer may be more accurate. In WLMail to find your version of the software, a press on ALT - H. If it doesn't show you the version and the build number, press on escape to two times, and then Alt - F B.
  Noel

• I'm playing True Crime New York City on windows xp and every time I'm trying to play the screen goes black and then I'm back at my desk.

  Whenever I try to play True Crime New york city for windows XP it is closes its doors after the theatrics start and gives me an error saying the file d3d9.dll has stopped working or the screen goes black and then then I know you left the game back and I'm at my desk again.

  Hello Respect137, welcome.

  It would appear that running DirectX files installed on your system were corrupt. This gives a test:
  1. go to: http://www.microsoft.com/downloads/details.aspx?FamilyID=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en
  2 follow the instructions which is there to install the package to update DirectX
  3. Once installed, restart your computer and try to run the game
  Let us know if this helps,
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer starts and I get the Windows startup screen, then my screen goes black and the computer is frozen I guess. Stopping and restarting do not work.

  I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD.

  Hi cgrosenick,

  -What software changes you did on the computer before the show?

  Follow these steps:

  Method 1:

  Start your computer in last known good configuration mode.

  For instructions, see How to start your computer by using the last good Configuration in Windows XP functionality

   

  Method 2:

   

  Follow the steps in this article:

  Computer stops responding with a black screen when you start Windows XP

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.

  original title: HELP ME PLEASE!

  (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.

  Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,

  Take a look at this:

  http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html

  Hope this helps

  Post back if necessary

  __________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this?

  After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this? all past images 03:00, but the video clips don't.

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Make a movie in four simple steps

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-in-four-simple-steps

• screen goes black when you use windows live mail

  In the last week or two, the screen goes black when you use windows live mail. I use windows vista home and I suspect it has something to do with some windows updates, I installed recently. How can I find and fix the problem? Thank you

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• After scoring in Windows 7, the entire screen goes black

  I have a Windows 7 computer with 3 user profiles.  When I connect to the computer with one of the user profiles the entire screen goes black.  If I do a control + alt + delete then I may see a blue screen even once to disconnect me but if I connect with the same profile again then the screen becomes black.

  When I connect to the computer with the other two profiles, the screen is normal and I see the desktop and fine icons.

  Any ideas how to fix the user profiles that gets a black screen after login?

  Black screen after that Cruiser connection still works

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/d47aece7-5e12-46EC-8d3e-e8671730a7ce

• HP ProBook s 4540: the screen goes black after the mode "Eve"

  Hello!

  My computer works fine but there is a problem, when I do not use it for a few hours or maybe an hour my screen goes black and it is nothing to do, but closed and then turn it back on.

  I have disabled all parameters almostly, screenshots here:

  #1- http://i.imgur.com/zelMPLD.png

  #2- http://i.imgur.com/FJNyLzi.png

  I don't know what to do, I think it goes to sleep after a certain time and then he don't wake up, I need to remove the battery and then turn again, he started arrive about 2 days ago when I updated my radeon HD7650 to 15.11.1 Crimson video card driver or sth.

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, close all open windows, and then restart the laptop.

  Kind regards

  DP - K

• Spectrum x 360: screen goes black randomly when on battery and some energy-saving options enabled

  Hello everyone,

  I bought this fantastic machine called spectrum x 360 and I love it.

  Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).

  This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
  This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.

  Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.

  Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).

  The entire screen works fine for normal operations, no artifacts.

  Replication of the problem
  Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
  Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
  Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.

  I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):
  
  -update panel houses;
  -advanced mode; energy saving
  
  If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.
  
  In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
  The rest of the computer works correctly.
  Any idea to solve this problem? Or should I keep these options turned off power saving?

  Hi, thanks for your help.

  I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
  Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
  I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
  To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
  It certainly is a problem with this energy-saving option.
  Now everything works fine.
  If the problem appears again, I will post more information.
  Thank you for your support.
  
  I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible.