Windows 7 starter edition does not recognize HP LaserJet 1536 dnf printer

Similar Questions

• Windows 7 Starter Edition does not recognize a hard drive WD

  Windows 7 Starter Edition does not recognize a hard drive WD, I used until last month. Device Manager sees it, he sees the USB controller (it lists as a mass storage device), but I can't access the information on the hard disk, or make use of the last backup. I tried to uninstall USB drives - it is not the thing. It gets listed under disk drives.

  Thanks for the reply.

  There was no error message: the device has been recognized (listed) by the USB controller and the Device Manager, but not by the management of the disks - so I couldn't access.

  I managed to fix the problem after:

  -J' scanned the computer (DELL Inspiron) with the Safety Scanner
  -J' completely uninstalled all the software associated with an external hard drive
  -J' uninstalled the USB controllers
  -reboot the system
  -reconnected the external HD
  -After gaining access to the drive, I installed the dedicated software

  Best regards

• Windows XP Home edition does not recognize new HDD on the Qosmio G20

  I have a Qosmio G20/390LS bought a year ago, when I worked at the Japan, I tried to upgrade the hard drive with a new HD 100 GB Hitachi SATA but I faced a problem that XP does not recognize the HD.
  For your reference, the Bios sees the new HD, when I install the XP operating system I load the driver downloaded from the Toshiba Web site but no way RAID with F6... XP does not recognize the HD.

  Do you have any idea how to fix?
  Thank you

  Hello

  Computers portable Japanese are unknown to me, but if this laptop comes with two hard drives and RAID option do not forget the good option is set in the BIOS. Without the right BIOS setting you will not be able to install the OS.

  On Qosmio G30, I was able to install Vista when for two HDD HARD drive settings were 0-RAID-1. Check it please and let us know.

• Windows 7 starter edition does not work with Java 7 (unable to load the chat room) how to fix?

  Hello

  I have Windows 7 edition - starter and Java 7 when I try to use a school chatrooom - java won't load properly - tech school says it's because Windows 7 does not support Java 7 - any ideas on how to fix?
  THX,
  Maja

  If he believes that the school needs to get a new technology.

  To check if the problem is that the cat does not work with Java 7, uninstall Java 7 and install Java JRE 6 from here:

  http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

  You must specify the exact error messages see you or post links on the screenshots so that your problem can be better understood.

• HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection.

  HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.

  When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.

  Sync Center says not connected and nothing is happening on the computer.

  When I bring mobile glass Center thing it doesn't say not connected to the smartphone.

  I don't see the phone of the link computer to which is connected to the hp laptop.

  the USB port works with my printer.

  What should I try next?   Thanks for your help.

  Hi Bill,

  You can try the following steps and check:

  Method 1:

  Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Method 2:

  If method 1 may not then try the following:

  If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.

  Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=14

  If the problem persists, please contact HTC.

  Please post with the State of the question.

• Driver Ethernet for Windows XP Home edition does not work on Satellite A100

  Satellite A100-784 PSAANE-02L011G3 ethernet driver for Windows XP Home Edition does not work. Cannot successfully install driver, downloaded all the drivers and still does not.

  As a sign of Device Manager yellow. I bought my laptop with Vista BASIC and I put XP - SP2. Country is Croatia! Help me please!

  Hello

  I can't believe that you are not able to install the LAN on this Satellite A100 driver!

  However, the satellite A100-784 supports a chip 82562GZ Intel 10/100 Mbit (Ekron) of Lan.

  If you want you can download and install page Intel network driver:

  http://Downloadcenter.Intel.com/Product_Filter.aspx?ProductID=999&lang=eng

  You will find the drivers Intel 8256 x Ethernet controllers

  Good bye

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• Windows XP Movie Maker does not recognize Canon camera

  Windows XP Movie Maker does not recognize my camera Canon HF R10.  Canon is also not listed as a brand for the digital display when I connect the device to the computer.

  Windows XP Movie Maker does not recognize my camera Canon HF R10.  Canon is also not listed as a brand for the digital display when I connect the device to the computer.

  =========================================
  Movie Maker has been designed to download from mini-DV cameras
  connected with FireWire... (they record at small cassettes... not
  flash drives)

  The best would be to download the video files in a folder on your
  hard drive... convert the WMV movie format and then import
  in Movie Maker.

  If you connect the camera via a cable USB and go to... My computer...
  It should be recognized as a drive. If it's... you can download it from
  there by copy and paste or drag and drop.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• have windows vista and it does not recognize a blank cd - r when inserted

  I have windows vista and it does not recognize a blank cd - r when inserted. I think that it is the drive d. I then put a cd - r with music on it and it does not even recognize them. When I put a game disc in there he reads very well. What is the problem?

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are unable to read CD - r discs on the computer. Please correct me if I misunderstood.

  1. What is the brand and model of the DVD player?

  2. you get any error message?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned below and later a update on the State of the question.

  Method 1: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060

  Please follow these recommended steps and post if you still experience the problem.

• Windows 7 64 bit does not recognize the external hard drive.

  Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

  Hello

  Initially, check if the hard drive is compatible with Windows 7.
  Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
  See the help article and check if it helps.
  
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  Tips for solving problems with USB devices (this also applies to windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  It will be useful.

• XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  It is usually best to install the drivers before connecting the printer. Use the printer installation disk, if you have one, or follow the procedure here:

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&l=en&s=Gen&DN=TT1092882

• Windows Live Photo Gallery does not recognize my external hard drive

  After I download photos from my camera to the external hard drive, I use the Gallery Windows Live to edit photo, but for some reason any he does not recognize the hard drive. I can see the drive using Device Manager and I cannot get Windows Live to see the photos, can't edit... any ideas?

  Thank you!

  Hello

  Is that with the live Gallery or even other applications cannot access external hard drives?

  To edit photos in Windows Live Photo Gallery, you must save the pictures to your computer, then try to edit it and check if it helps.

  For more information, see the following Microsoft article.

  Windows Live Essentials: Photo Gallery:

  http://explore.live.com/Windows-Live-Essentials-Photo-Gallery-get-started?T1=T3

  If the given steps have not helped, then it is better to post the same question in the Windows Live Photo Gallery portal for further assistance.

  Photo Gallery Portal: http://windowslivehelp.com/product.aspx?productid=20

  Hope the information is useful.

• I just installed Windows 7 and it does not recognize my HP2009m monitor speakers.

  I just installed Windows 7 from Win XP on my desktop that is connected to a HP2009m monitor with internal speakers. Win7 does not recognize that the speakers are connected, so I have no sound. How can I get Win7 to recognize speakers monitors? I need drivers? I have download the drivers for the monitor get Win7 recognize correctly.

  Thank you - that was where my thinking was going as the solution too - an I updated the video drivers, the sound started working!

• HP Mini 110 windows 7 starter edition will not be upgraded to windows anytime

  Help! Can't get my HP Mini110 of windows 7 starter edition Home Premium. Got the key, but it is said that this key is not compatible with current windows and cannot be downloaded. What does that mean? How can I download and install this upgrade? I paid for it.

  Probably means that you have a copy of Windows 7 32 bit installed on your computer and you are trying to download and install a 64 bit version of Windows 7.

  You can't do an anytime upgrade from 32-bit to 64-bit. New ball game. Requires installation not an anytime upgrade.

• Windows 7 password problem: does not recognize password after waking from sleep

  So I have recently buy a netbook with Windows 7 operating system. I create the administrator account and password protect. All right, install software, copy documents, etc. in the "My Documents" folder and happily use the machine for a few days with no problems. Then work off the battery voltage, put the PC in sleep for some time. When I try and log back in after the awakening of the PC, it does not recognize the password. Try with cap locks, off and all the rest, but not luck. I must finally remove the battery and restart. Sign in as normal (the password is recognized) and go in the user administrator account to disable the password, but then again, the current password is not recognized and I am not allowed to make changes. However, I can still close and log on by using the current password. Confused. Anyine have any ideas?

  There is no need to remove the battery or pull the taken when force a PC to stop. By pressing the power button for about ten seconds will do the trick.

  Your password problem: you might be dealing with a foreign keyboard problem. Make the password to something that is independent of the keyboard configuration, for example 123456.

  To reset the administrator password, follow these steps:
  1. click on start.
  2. type the three letters cmd in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands and press ENTER after each:
  net localgroup administrators
  (This will show you the accounts that have administrative privileges. What is?)
  NET user administrator 123456
  (This will set the password to 123456)