Windows 7 system exec.vi error 2: memory full

Similar Questions

• Update for Windows 7 for x 64-based systems KB976264 80242014 error code

  Hello

  I use Windows 7 x 64 system. I have a problem with the "update for Windows 7 for x 64-based systems KB976264" 80242014 error code and the status "pending to be" appear next to him. I think that the update has been installed in part because whenever I'm turning off the computer there is a message "system is preparing for configuration" and when I turn the configuration but still start, it stops when it reaches 35 percent. The computer restarts and then there is another message that the configation was not successful and the changes are in return.

  I tried to install the update manually from the Windows Web page but there is always an error code that the update is not available for my computer, even if I download the version which should be compatible with it.

  Could you please tell me how to reinstall or uninstall the update not to be bothered by my computer restarts every time that I turn it on?

  Thank you

  Hanah,
  Take a look at this article and try the troubleshooting steps in this regard.  Let us know the results.  Also, check the update history and see if there are other error codes.

  You can also perform these troubleshooting beginning steps.
  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my system shows an error with the disc of windows-no legend

  my xp os will be faced with a problem that shows with the legend "windows-no disk", and the error code is "exception processing message c000013 parameters 75b6bf7c 4 75b6bf7c 75bf7c".

  It's a shame that we don't know anything about your system, but it's the way things work here so I can give you some general tips about this message:

  If you mean see messages like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Some people think that people there may be to not to use the device safely remove feature (and maybe), but I never use Safely Remove Hardware with external USB devices and I don't have this message for you if you can't understand it and other things work very well, you can tell XP simply can't show this message when there is no reason.

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications.

  When I start my laptop I get "your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. This process may be denied requests for some applications. "and my laptop takes forever or does not open my programs. any help? Thank you.

  less than low disk space,

  What seems to be the case, it's that your windows is having a hard time resize its file for virtual memory.

  my suggestion is to remove "auto" at that time, and then set a custom format.

  I recommend that you set the initial size of 2 and max at 1152.

  Here's how to put a link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Restore error: file spp.dll is not designed for windows or there is an error.

  Original title: download spp.dll

  My SPP.dll file is 0 kb.  When I try to access the system restore, it indicates that the file spp.dll is not designed for windows or there is an error.

  How can I get another spp.dll file? I can download one from the internet.  I tried but just keep getting a service offering public fixit. I bought RegUtility, but it did not fix the file.

  Try to run the System File Checker:

  http://support.Microsoft.com/kb/929833/en-us

• Get the error this Windows Installer system could not be accessed

  Original code in title: error 1601
  Here is the letter that I just sent to Microsoft Support. This is the last of about 15 or so that I sent them, so the "BOLD" prints.

  ERROR CODE 1601 WINDOWS INSTALL SYSTEM ARE NOT ACCESSIBLE!

  THIS HAS NOTHING TO DO WITH SKYPE. DON'T SEND ME A LINK TO A FORUM. PERSON NON-DU SUPPORT OF MICROSOFT HAS COMMENTED ON SINCE MARCH. NONE OF THE FIXES WE WORKED ANYWAY.

  DON'T SEND ME ANY LINKS FOR AUTOMATIC MICROSOFT FIX - IT. IT DOES NOT WORK.

  DO NOT SEND ME LINKS TO THREE DOWNLOADS THAT YOU ALREADY SENT TO THE WINDOWS SERVICE INSTALL. THEY DO NOT WORK.

  I THINK I'VE NOW EXHAUSTED YOUR LIST OF ANSWERS TO THIS PROBLEM.

  TRANSFER ALL THESE EMAILS TO A CASE MANAGER AND ASK THEM TO CONTACT ME AT THIS EMAIL ADDRESS.

  If you think that the advanced system of care did, then uninstall the software.  If you want a cleaner, try CCleaner (freeware).

  http://www.Piriform.com/CCleaner

  SP2 is located in the "Display" section updated installed programs and features in Control Panel

  It will be installed as day in 2009 if you have it installed as soon as its released.  Look for it under Microsoft Windows updates.

• Dell vostro 1700 with windows 32-bit vista a error windows\system\winload.exe file is missing or damaged

  Trying to upgrade the computer to windows 7 and got this error

  Hello

  It depends on if the manufacturer of your computer/laptop has windows 7 drivers available for him as to if it will work properly

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is the Forum of installation of Windows 7 for questions about installing Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

• Error message: can not find script file "c:\". WINDOWS 32\system\windows.db»

  Original title: error message: can not find script file "c:\". WINDOWS 32\system\windows.db» Help!

  After starting my Vista laptop, I get the error message: can not find script file "c:\". WINDOWS 32\system\windows.db» The mouse cursor freezes and I can't do anything on the PC. The PC will run in Safe Mode help!

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix corrupted file MSDT.exe on Windows 7 error "C:\Windows\diagnostics\system\Networking is corrupted and unreadable."

  Original Title:msdt.exe corrupted file

  I can't find any solution to repair is Msdt.exe corrupt file.

  This is the error I get C:\Windows\diagnostics\system\Networking is corrupted and unreadable

  Windows Update is not automatically searching for updates and I can't update adobe

  These are the things that I tried 1.  Restore to an earlier date. (does not work because of the corrupted file)

  2 Ckdsk (does not work or does not work in safe mode)

  3 Sfc/scannow (does not work or does not work in safe mode)

  4 Microsoft Fix (cannot open the troubleshooting of windows) does not work.

  This is the error that I get Code80072efd

  Hello

  I'm afraid that, as most of the troubleshooting steps have been tried before without much success, only two options remaining to recover operating systems are:

  (a) the system restore:

  System Restore helps you restore system files from your computer to an earlier point in time. As a general rule, you want to restore your computer to a restore point created before the date and time when you started noticing problems. The descriptions of the restore points are created automatically with the name of an event, such as Windows Update to install an update. System Restore returns your computer to the State it was in before the restore point that you choose.

  To learn more about how to run system restore you can follow this link given below:

  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

  NOTE: However, it is said that the system restore does not affect your personal information such as e-mail, documents, photos, videos, etc., but it is quite possible that some of your personal files are removed during the restoration of the system.

  During the restoration of the system, there may be errors and those errors can damage the files that are present in the system. And turn off your computer during the restore process may also lead to the loss of files. Sometimes, when the restoration of the system is down, it can lead to the loss of important files as well.

  (b) in the upgrade of the Place:

  An upgrade on the spot is the final solution before you have to reinstall the operating system.
  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  Note: Applications that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  Hope this helps, if you need help with windows, please let us know we will be happy to help you.

• When I start the computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error.

  a.o.a, when I start computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider." Here again, box comes and says bad googleupdate.exe Image.  I open the cutting tool, then again the box comes snippingtool.exe - Bad Image. Please solve my problem

  Original title: bad image

  Scan the PC for malware http://www.malwarebytes.org/antimalware/

• When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working.

  When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working. I tried several times to load the games following the indications for help but the games is not accessible. My computer is a remanufactured unit that was on the lease are there steps I can take to solve problems?  Thank you

  Original title: frustrated in New York

  The problem seems to be the igdumd64.dll:

  Fault Module name: igdumd64.dll
  Fault Module Version: 8.15.10.1749
  Timestamp of Module error: 4a5bdf54

  The igdumd64.dll is a component of the Intel graphics driver and seems to be an older version then try to update the graphic driver Intel.

  You could try the manufacturer of the computer for an updated driver, or use the following utility for intel to check a generic version:

  http://www.Intel.com/p/en_US/support/detect

• Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Remember - this is a public forum so never post private information such as numbers of mail or telephone

  Device base system driver code (28)... I use a sony vgn z555dn laptop after I've upgraded to windows 7 this is the error that I can't fix all the others, I managed to solve... Please help

  Hello

  You updated the BIOS and motherboard (chipset drivers)? All device drivers? By checking
  manually on the link above?

  If so you need to contact the Sony Support as the error is in the provided OEM drivers and not
  Windows 7.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.