Windows 7 system freezes and Constant mouse lag

Similar Questions

• Trying to install a new installation of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes.

  win xp install

  Im trying to install a new install of win xp on a dell insp 700 m. all is well until you are ready to hit enter to select where to load windows. the keyboard freezes and crashes. It worked early, when I hit enter to launch the cd? any ideas? TX marty

  Thank you! I tried what you mentioned, nothing has worked... I plugged a usb keyboard and it works, so I'm starting to believe it could be a motherboard problem. I finally got windows xp pro installed, no conflicts in Device Manager, all the drivers are installed and now running smooth. I removed the keyboard, and re-set, all connections look good, but still not good. the synaptics keyboard works fine and both rt & lft click the buttons. I pulled the ram to inspect it, it's the right speed, ddr2700, and after running for an hour, it was cold to the touch! I'll try to get a new keyboard and replace it, their pretty good work, if still not good it becomes pieces on ebay... lol tx again... Marty

• Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

  Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

  It print a page of test very well and also printed from Notepad and word fine

  Scott

  Hi Scott,.

  (1) if it works well before?

  (2) remember to make changes to the computer before this problem?

  (3) what is the complete error message you receive?

  Method1: The computer in the boot and a test to see if you can print

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can post your query on the Windows Live Forums for more expert help

  Windows Live Forum -http://windowslivehelp.com/

  Thanks and greetings

  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• system freezes and forces arrested without windows

  running windows vista Home premium 32-bit on a computer hp laptop. I ran system restore and system recovery.

  My screen goes to diagonal lines across the screen. I use a cooling device when using my laptop.

  do I have a hardware problem or a software problem?

  http://welcome.HP.com/country/us/en/support_task.html

  ·                Go to the HP Web site > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  You can have either corrupted graphics drivers or graphics hardware fault.

  If the drivers do not resolve the problem, contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• IE 8 that I use with Windows XP constantly freezes and says that it is (no response).

  I have a little Acer One connected to my bigger screen.  I use the free version of AVG, I've read can cause problems and I have also read that I needed to update my version of Java and this could lead to freezing and no response in IE8.  Come to find out that I didn't even have Java so you download the version for my computer but nothing changed.  I need an answer to help my computer.  He arrived at the point where I can't even get anything without IE8 freezing and when I try to wait just outside, it will specify that it does not.

  Someone has fixes out there for this?  I ran the Microsoft Fix It tool - nothing.  I have disabled all addons just to see if it can help, but - nothing.  I am at a loss here.  Help, please.

  Thank you, joy

  could be malicious or ie8 is corrupt.

  There are several options,

  1. clear your temporary internet files, go to tools, internet options, under browsing history, click on remove in the next box, just check and uncheck the box given to preserve your favorite Web sites.

  2. Remove avg using the removal tool:

  http://www.Avg.com/ww-en/utilities

  3. install Microsoft security essentials:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Download MSE

  http://experts.Windows.com/w/experts_wiki/89.aspx

  MSE installation checklist

  READ the checklist

  4. make sure that your system is clean:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  Remove all found, restart, and run again until analyses race clean, these can be removed later if you wish. Perform analyses to one at a time, please.

  5. go in Microsoft updates and ensure you are fully patched and updated analysis of the express, install, then do a custom scan and install Rootkit updates.

  6 uninstall ie8 then reinstall ie8, if you installed SP3 after ie8, read this:

  http://support.Microsoft.com/kb/950719

  After back with the results.

• My Acer Aspire V - 123 Windows 8 keeps freezing and some keys on the keyboard are not working

  I'm currently using a netbook ACER ASPIRE V - 123 with Windows 8 as its operating system and it is not yet updated to 8.1.

  At first when my computer laptop while boots 'seems' to agree, and whenever I try to open a file without any content it took me about 30-45 seconds, opening a program would take me almost 45 seconds to a minute, and I think that something is not right with my laptop and when I try to open a website via my web browser and my laptop would just FREEZE and I can't do anything about it , but I hate to do HARD reset. And to add to this unfortunate scenario is that some of the keys on my keyboard are not working the letters like R, T, I, O and backspace and many others (which I don't remember exactly one by one).

  I try to read some forums on different sites and some posts to the community of MS and did several tests like starting in SAFE MODE w / NETWORKING and downloaded the software like MALWAREBYTES to find potential infections, but nothing found. I also did the start-up in MINIMAL MODE, but again, the situation was the same, but when I'm the boot without failure the filling and freezing are only decrease and I don't want always starts in mode safe.

  From now my laptop is booting in a start-up in MINIMAL MODE and I don't know what to do next, what to try next. I hope someone could lead me to the solution to this problem, I would be eternally GRATEFUL.

  Please do help me in a step by step process and if possible please guide me with pictures or screenshots because I prefer to learn things when I Visual effects on what to do.

  Thanks for patiently reading this post.

  -Raphael

  Hi Ben,

  Sorry for the late reply, the laptop has been fixed, it seems to be a hardware problem. We disconnected the connection of the keyboard to the laptop right now I use an external keyboard to type. Cannot afford now to buy and replace my laptop keyboard, the graphics card Driver has been updated also and I've reformatted the OS

  The gel did not appear more in the normal boot and if all goes well for work this way for good.

  Thanks for the information you have shared to me, he has also been a great help.

  until next time Ben!

  Best regards

  Raphael

• Satellite M70-169: screen freezes and meshes + mouse freezes

  Hello
  Hope you can help. So far, I'm impressed by my toshiba satellite m70-169.

  He has recently developed an intermittent fault: when the tilt of the screen the effect of light mesh on it and the screen freezes. The mouse also hangs at this point.

  If I tilt the screen one way or the other I can get it to work properly. A slighy inclination of the screen can cause the screen to freeze again. The problem is getting worse, however.

  The machine has never been dropped or struck, but was taken by one of the screen when it is open.

  I disassembled the strainer and push gently on various points and cables but nothing in this area suggests a loose connection or a weak point. So I believe the problem is in the essence. I tried to open this up but it fails because I didn't force anything.

  Question 1: any suggestions on the problem and possible solutions?
  Question 2: advice like how to open the main part, so I can check any loose cables, connectors or broken bones?
  Question 3: patterns for disassembly?

  Even once - I hope you can help - thanks in advance...

  John

  Hi John

  The above user is right. It s too risky to disassemble the laptop without having any experience with laptops.
  It is why I always recommend taking to a technician.

  But if you want, you can have a look here:
  http://www.irisvista.com/tech/laptops/ToshibaM55/laptop_LCD_screen_removal.htm

  It s a site on satellite M55 and withdrawal screen.
  But once again; You can do everything BUT only at your own risk! ;)

• Windows XP system repair and commmand prompt still does not

  I'm still having a promblem with my computer. System repair and command prompt still does not. I got a response from Joselbarra, but I can't find the link to meet him. So if you see this here some answers to the questions you asked. My system is microsoft windows XP Edition family version 2002, service pack 3 (although in Add or remove programs there are no size MB next to service pack 3 and all my windows programs).

  I do not have anti virus and have ever since I bought my computer 6 years ago (I know, but I'm paying for it now).

  My /CDDVD player has not worked for about 2 years.

  Windows XP is already installed on my computer when I bought it. The CD only I can find is Microsoft Works 7.

  My problem is that system restore was taking more than an hour to work. Then I disabled my jeanmarie, until it gives me the message that my restore was successful (or not). When I turned it on again it seemed have lost all value files and text processing, user account, microsoft msn password. So I can't access the internet to download anything.

  I tried through the command prompt as Joselbarra suggested. VBScript and jscript regsvr32 succeeded. However I mshtml was not. I had messages that said.

  LoadLibrary ("mshtml"), the failled specified module could not be found.

  No name of the specified DLL.

  use: regsvr32 [/ u] [/ s] [/ n]

  Dllname [/i [cmdline]]

  / u unregister Server

  s silent; dispalay message box

  i - call. Installation of DLLs on optional [cmdline]; When used with / u calls dll uninstall

  As you can imagine, my mind is filled with jargon tenical and I'm not the wisest Please HELP someone.

  Here is the link to your previous topic.

  http://social.answers.Microsoft.com/forums/en-us/xpperformance/thread/4c2402e8-4668-425F-9163-a5b6960dee16/

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• System freezes and issues of the 7335 40L model

  Hello

  10 months ago I have the model L 40, 7335 there are 3 firmware updates, but the system continues to be frozen (can not change channel, HDMI ARC unknown blocked menus) several times a week.
  To unblock the situation, I have to unplug the power cord, then the TV system raise and work properly.

  I tried to disable the features that I do not serve me without success.

  You do not see any improvement as a result of updates to firmware, I'd like to know if there are concrete solutions, or if the guarantee can be used to request a repair or replacement?

  You can at any time you want to contact the nearest service Toshiba or your local dealer and ask for help.
  By the way: have you tried to set your TV to the factory settings?

• Windows Vista guard freezing and 'unresponsive. '

  I have a HP Pavilion dv7 Notebook PC with Intel Core 2 Duo CPU P8600 @ 2.40 GHz, Memory (RAM) 6.0 GB, 64-bit operating system. It has been gradually worsens with the "no answer", seems to "freeze" screen become white. I've updated the latest. Have updated the program, Trend Micro Titanium Maximum security and cannot find anything wrong. I'm not experienced with a computer by far if there is no help for baby in the computer world it would be appreciated!

  Hello

  Heat and/or material could easily have a role in this issue. Remove ALL power and reinstall the memory.
  in fact, remove and replace - don't do not just tight. Also erase the vents and make sure that the fans will be
  (listen to) work.

  Check with HP Support, their books online and ask in their forums known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ----------------------------------------------------

  Here is a troubleshooting guide comprehensive enough for any software related issues:

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems). You said TrendMicro, all others already on the computer.

  TrendMicro has been known to cause problems such as you encounter. See the following for message
  methods of troubleshooting it.

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Touchpad keeps freezing and the mouse move

  Help, please! My HP 1000 - 1220LA notebook Mouse-mouse does not respond by my touchpad very often. Then I have to wait a long time for its release. It is very annoying because it happens very often. I've had this laptop for a little over a year and it worked fine. Recently, he has been the main problem with gel. Product # is B8T42LA #ACH.

  I help here already and the problem disappeared, then he came immediately after a while. Help, it's affecting my productivity!

  Hi ashyani
  
  PLEASE REMOVE THE SERIAL NUMBER OF YOUR MESSAGE, HACKERS CAN ACCESS YOUR SYSTEM WITH THIS *.
  
  What operating system do use you, 32 or 64 bits?
  
  What was the result of material test @CherylG proposed to do, when you had the same touchpad freeze?
  
  In the meantime, first try a hard reset. The following documents will help you this: http://support.hp.com/us-en/document/c01684768
  
  Uninstalling the program pilot of the touchpad try Device Manager in the control panel (or manager type of devices in search of charm), right click in the mouse option, click on uninstall the Touchpad driver.
  Restart the system
  
  Now, download & save the most recent available for your product in a location known on your computer, your link to product drivers: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5314327&query=HP%201000-1220LA&
  
  Double-click the file from this location & install it.
  
  Restart the system.

• Qosmio G30 - need two Windows operating systems: Vista and XP

  Hello

  can someone help me on the following application procedures:
  I need two operating systems on my Qosmio: Vista and XP
  I have two drives RAID inside my Qosmio and I installed Vista on the first.

  I tried to install XP on the second hard drive and I did (I have inserted XP installation disk and sellected second disc for installation), but after installation I got just the XP startup option.

  I can see all the files of Vista on the first disc, but allows boot XP only. Directory Windows XP was intalled on second drive, but boot.ini and some system files have been at the root of the first disc.

  I liked Vista and I repeated the procedure (with my recovery CD of Vista) and now I have Vista on the first disc and all files of XP on the second disc. I do not study how to get full XP on the second disk bootable system.

  What I need:
  Vista on the first hard drive.
  XP on the second disk

  I would have completely independent Windows System. This means that I have to start selection of BIOS, not Vista or XP.

  Hello

  It's very strange. If you have installed the first Vista and XP as a second OS then the Vista boot manager must exist usually.

  Please note that Vista uses 2 partitions. A partition is not visible. I hope that you have installed XP on this partition.

  In any case, I recommend you to create a new partition on the first HARD drive and you could install XP as second operating system.

  After this installation, you can use applications freeware like EasyBCD or VistaBootPRO to change the Vista Boot Manager.

• compatibility issue between the windows operating system 7 and NERO 7 ultra edition

  y at - it an easy way to make NERO 7 compatible with windows 7

  Thank you

  I took a glance at the website of the company Nero. It seems that Nero 7 is compatible with Windows until Vista operating systems. Here's what the company says about Windows 7 and Nero 7.

  You may need to upgrade to a newer version of Nero.

• Windows 7 system administration and privileges of the listener

  Settings of group policy for Windows 7 OS in an environment not connected to the network of stand-alone require that auditors Auditors and system administrators have full control over the system. This requirement is specified in the DoD STIG and is not reconfigurable from what I see. Auditor system administrator privileges and CAN be separated in the settings of operating system Windows 7 in an environment not connected to the network?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Move the Windows Backup system image and backup to a new hard disc

  Hi all

  I got a new external hard drive because my old external hard drive was not large enough to hold all my backups.  Now, I would like to move the backup from the old hard drive to the new hard drive.  It is really easy to start from scratch on the new drive, but about two months ago of backup history on the old disk I want to keep if I can.  Also, I can't figure this out on my own because it seems that the backups are stored in hidden or system files, or which are prohibited and require special authentication.

  Can someone help me find the location of the backups on my old hard drive?  Or is there something I should do in Windows that will transfer the data for me?

  Thank you very much!

  Kevin

  The name of the folder that store all backups of your image is: X:\WindowsImageBackup\

  Where X: is the drive letter of the external drive.

  If you also created backups of files and folders these are also easily spotted. If for some reason you can't locate/view this file enable "Show hidden folders and files" in Windows Explorer.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.