Windows 7 to downgrade Windows XP HPE-150 t

Similar Questions

• Test Code Question SMART diagnosis HPE 150 t PC with Windows 7 64 bit

  HPE 150 t PC Windows 7 64 bit

  The SMART monthly test States: WARNING: for an indefinite period. State Smart information indicate the status code 297Ch. Does anyone know what this means?

  "Inderterminate" status means that the utility could not perform the test. correctly. It is most likely a software problem and is not a problem with your system.

• HPE-150 t: new second HD HPE-150 t

  I tried to add a second HD to my hpe-150 t, but the reader does not appear during the boot menu setup or windows.

  To test the SATA and I went then to the hand of power HD cables and it still works so I do not think it is a cable problem.

  The disc was just bought from Amazn a black WD1003FZEX SATA III disc. My computer is a few years old and has a SATA II 3Gbs but told me this isn't a problem.

  Is there another way to test the drive? I don't have another pc.

  The new WD drive is probably AF (Advanced Format). Your system must have SP1 to use such a unit. Now, it's been downloaded through updates.

  Prepare the new hard drive

  Press the button START

  Open the control panel (you must be in Classic view).

  Open administrative tools

  Click to open computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  In the left pane, under storage, click Disk Management.

  Your boot drive will display a Disk0.    Stay away from that.   If you are not clear on this point, STOP and get out.

  The added disk should appear as Disk1.

  Click on a region unallocated on Disk1 and then click New Simple Volume.

  In the new Volume Simple Wizard, click Next.

  Type the size of the volume you want to create in megabytes (MB) or accept the maximum size by default, and then click Next.

  Accept the default drive letter or choose a different drive letter to identify the partition, and then click Next.

  In the Formater Partition dialog box, do one of the following:

  If you don't want to format the volume right now, click on do not format this volume and then click Next.

  To format the volume with the default settings, click Next.

  Review your choices and then click Finish.

• How the Pavilion HPE-150 t has 6 GB of RAM with 3 DIMM slots

  Check the specifications for the Pavilion HPE-150 t, I see that HP currently offers a free upgrade to 6 GB of RAM (from 4 GB.) What I don't understand is that these 6 GB of RAM are provided in 3 DIMMs.

  The only setting I can think of that allows two-channel with 3 DIMMs mode in this situation is to have a pair of 1.5 GB DIMMS in channel A and a single 3 GB DIMM in channel B.

  However, AFAIK, DIMM is not sold in one of these densities (1.5 GB and 3 GB.)

  Can someone explain this for me, please?

  As far as I know, HP is not the "Dual-channel" advertising - they simply offer amount:

  http://www.shopping.HP.com/series/category/desktops/HPE150t_series/3/computer_store?JumpID=reg_R1002_USEN

  FREE UPDATE! 6 GB DDR3 1333 MHz SDRAM [3 DIMMS] from 4 GB

  http://support.HP.com/us-en/document/c01976259

  It is highly unlikely HP POP just in an extra 2 GB DIMMS.

  The only way you can get dual channel of this mobo is to fill the memory DDR3 DIMM 2 and 4 or all 4 DIMM with the same type and density.

• Pavilion HPE 150 t: I have a desktop Pavilion which does not connect to the internet all of a sudden

  Had two problems.  My AVG was locking up my computer with the function of guard dog.  I was able to get past and get uninstalled AVG.  Now, I can't the computer to connect to the internet.  I've updated the ethernet driver, but it still doesn't work.  Said that there is a problem with the driver.  I used a wireless adapter and it shows as connected but also says there is a problem with the driver.  I disabled all the security settings, that I can find.  Firewall AVG, Windows Defender, real key.  I did the sfc scan now and it found nothing.  He won't let me not reset the pc to restore the pc or anything like that.  I tried to update the BIOS, I think I already have, and he said that it is "denied" see administrator.  When I tried to reset the nsch he says he has been "denied".  I don't know what is blocking the connection.  Internet works anywhere in my house with the exception of this one computer.   Suggestions?

  So, I thought about it.  None of the support stuff helped but thanks for trying.  I'm always up for the Microsoft Security error at startup.  I noticed that I don't have McAfee installed when windows Defender popped up it asked McAfee, I used to have, and I saw where the real key is a McAfee product.  But I always felt that something is blocking the connection.  I ran AVG removal tool again, and once more he showed the AVG protection there.  I completed the deletion. still nothing.  I went to the properties of the ethernet and there I saw a place for the files AVG filter.  I unchecked it and BAM my internet connection was back up.  If not, was not windows.  This file kept loading with the drivers and I seen this every time but never uninstalled.  Once I killed him felt stupid, frustrated and angry.  I was very disappointed with AVG lately.

  Thank you for support for trying to help me, I learned a lot during this mess.

• HPE 150 t: Add HD HPE 150 t

  I would like to add a second hard drive for my 150 t. He has a spare disks available, but I don't know if I can add a SATA III which is 6Gbs or I will have to stay with a SATA II 3gbs because the existing drive is SATA II 3gbs?

  Yes.  You can add a HARD SATA600 disk. It is a compatible specification down and will only work on the SATA300 spec.

• HPE-150 recovery disks t

  Is it possible to buy these more? If so, how?

  Please see HP - order software and driver media page or third-party provider ComputerSurgeons.com to order a set of HP recovery disks.

  Please click the White Star of KUDOS to show your appreciation

• I resized the window at 150% and now I can't get back to 100% view and keep this size. How can I get that back to the right size?

  I resized the window adobe to 150% and now I can't go back to the 100% size and keep this size. How can I retrieve the original 100% and keep this size?

  View menu > Zoom > Zoom on...

• Which files must be in %System%\Windows\PCHealth\helpctr\binaries\ here?

  Hello

  Good bit of info to use.

  Dell inspiron 6400
  Windows XP sp3
  150 GB HARD drive
  1 GB of RAM
  Intel processor t2400 @1. 84 GHz

  1.
  Now, my last question is that I could not run the msconfig for some reason any and someone told me to insert my windows xp disc and go to cmd and type sfc/scannow, but I lost my XP disc. Is there a way to download all the missing files Microsoft?. Except that when I tried to install msconfig it wouldn't let me it says access denied, because I am the admin I don't know why he did it. I have only a single file in this folder %System%\Windows\PCHealth\helpctr\binaries\ now I just checked it again after having tried sfc/scannow without disc and some files are returned...

  What is the list of the files needed.

  2.
  At startup it says boot error then there another line that says c: Windows something, that is a little difficult to see exactly what it says as it also loads quite fast.

  Hello

  1. what exactly is the problem you are experiencing on your computer?

  2. Why are you trying to scan SFC?

  3. what happens when you try to run msconfig?

  4. how you try to install msconfing?

  5. What is the full error message are you getting Windows start?

  6. are you able to boot in safe mode?

  7. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer: http://support.microsoft.com/kb/330184

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• Unable to activate Windows it says valid product key.

  Original title: help me before I have break! 11

  I have a gateway computer. I put a new hard drive 2 weeks ago. It was working fine. This morning, it doesn't let me log in saying that my product key is not valid. I bought the upgrade to windows 7 for 150. but I can't go to the start menu to install it. I run an ebay business and need to get my computer facing up and running right now. This process is most frustrating! I need help now

  Hello
   
  Check out the following and check:
   
  Method 1:
  Windows 7 activation error: invalid product key
  http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-invalid-product-key
   
  Method 2:
  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929
   
  Hope this information helps.

• Cannot enter BIOS on Win 7 HPE with American Megatrends BIOS

  Although others have asked how to access the BIOS Setup interface, the answers have not solve my problem. so I write another similar question.

  According to the subject line, I can't access the BIOS Setup interface during startup.  My system runs Windows 7 HPE.  The equipment includes an elite group of ECS motherboard that came with BIOS of American Megatrend chip version 4.6.5 and is dated 05/03/2012.  I have never flashed or otherwise updating of the BIOS chip, but I could bring up the graphical user interface and change the options.  I did quite recently in fact.

  When I power fail system and/or entering the cycle of rebooting from the button start, the system stops and then begins to start and displays the start of American Megatrends screen.  Press DEL repeatedly has no impact on the continuation of start-up.  He proceeds as if the keyboard were not active and the system did not, therefore, the interruption of the keyboard...  Because the splash screen also mentions F2 and F7, I tried these interruptions as well, nothing helps.  The boot process has continued.

  I searched the web until my fingers are simple bumps and can't find anything really useful.  I read and reread mother ECS card manual without finding anything.  I found a FAQ on the web page of American Megatrends, which addressed problems to access the BIOS with Win 8, which suggests that the change of power options would be effective. However, these referenced power options do not exist in my win 7 system HPE.  Yes, Power Options are available from the Control Panel, but the individual options are not the same to win 8.

  FWIW, I pulled all the hard disks internal power cables to see if I could access the BIOS interface.  I was able to do so; However, without BONES, the keyboard is not active so no keyboard interrupts can be issued.

  I would be grateful for any advice on how to influence of post-processing to slow down and make sure that any issue the keyboard interrupt is seen and followed.

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with you are not able to enter the BIOS American Megatrends BIOS setup.

  I can understand the inconvenience that you have experienced and will try my best to help you.

  In order to get more information about this, I suggest to visit the link below and check if that helps.

  http://***.com/products/BIOS-UEFI-firmware/

  Also, I suggest you to update the BIOS and check if that helps. Please visit the link below and check if that helps.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows/BIOS-FAQ#1TC=Windows-7

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Satellite U400-138: can I move the folder of recovery

  Hello

  I just bought my nw laptop Toshiba (U400-138 to be precise).
  It came with Windows Vista Home Premium preinstalled with the possibility to recover the HARD disk. When installing the disk has been partitioned like this:

  C: / 145 GB - Windows Vista
  E: / 150 GB - Data

  The E drive the folder of HARD disk recovery.
  The problem here is that I would use Linux instead of Vista and also I want to re - partition the drive in a different way.

  So here are my questions:

  1.) it is possible to move the folder of disk recovery HARD to separate and perhaps much more small partition (6 GB or more) without doing any harm to its functionality? I want to keep just in case

  2.) I lose my warranty if I install Linux?

  Thx for your replies ;)

  Hello

  (1) If you change the folder or delete file recovery that you will not be able to recover the laptop using the recovery of HARD drive!
  That is why it s is strongly recommended to create a diskette using the creative tool for recovery disk pre-installed Toshiba's own recovery.
  If you create this DVD then you are on the right side and you can change everything on the HARD drive. If something goes wrong, you will be able to restore the operating system using this disk.

  (2) No, you will not lose warranty if install you Linux

  :)

• HP Envy 17: 0xc0000225 error code won't BOOT HP ENVY 17

  Trying to turn on, get the Error Message:

  0xc0000225 error code

  Your PC could not start properly

  The NEW blue screen of death!

  The computer was loaded just a few Microsoft updates last night before stopping.

  10 64-bit Windows

  Where do we go from here?

  The error code and the situation are not addressed by Microsoft and hours of work-around so did not work.  Recovery disk was ineffective as a myriad of Internet solutions.

  I had to buy a CD of Windows 10 for $150, and enter the BIOS to boot from the CD Ms.  Once I had the opening screen, I selected "REPAIR".  2.5 HOURS later, I was back to and all running programs.

  MS scammed me once again... Thank you Bill Gates!

  SDJL THANKS for the reply.

• How to reduce the size of the PDF file on scanned on my PMX922 docs

  I deal with a lot of documents, and I find that when I scan the docs on my MX922 the size of the PDF file is MUCH larger that the size of the original PDF file. That's what I see (on a document page 2):

  (Received) original size: 11 k

  Default scan (Quick Menu): 1061 k

  With compression high (Quick Menu): 116 k

  The Panel of the printer (res 150): 209 k

  Windows scanning app (150 res): 1495 k

  Scanning from the Quick Menu with high Compression seems to be the best, but it still somewhat adds to the file size. It's a big problem so I dal with many GREAT docs. Several times the size of the file increase prevents me from being able to send files. Is there anything else I can do? Does anyone have any suggestions?

  Hi 1wwjdbro,

  We can set the PDF to HIGH compression option in the utility of digitization of IJ and also select the image digitized transfer compression to reduce the file size of the PDF file. To do this, please follow these steps:

  1. open the utility of scanning IJ.

  2. in the Scan from Canon IJ utility window that opens, click SETTINGS... at the bottom right of the window. The settings dialog box is displayed.

  3. click on the SCAN of DOCUMENT option in the left pane of the window.

  4 in the right pane window, look for the box to COMPRESS SCANNED IMAGES to be TRANSFERRED in the Scan Options section and check it.

  5. then, in the SAVE the SETTINGS section, find the FORMAT of DATA field and ensure that PDF or PDF (multi-page) is selected, and then click the SETTINGS button to the right of the field.

  6. in the window that opens, find the COMPRESSION PDF section, then select TOP from the drop-down list. Click OK to close the window. You will be taken back to the SETTINGS window.

  7. once all settings have been selected in the SETUP window, click the OK button at the bottom of the window to save the changes. The IJ Scan Utility main screen is displayed.

  8. click the DOCUMENT button. Housing starts scanning. Click CANCEL to cancel the scan if necessary. The scanned images are saved to the location of the selected folder previously specified in the SETTINGS... window.

  I hope this helps!

  If you need more assistance, please call 1-866-261-9362, Monday - Friday 10:00 - 10 pm et (excluding holidays) and a technical support representative Cannon will be happy to help you.  There is no charge for this call.

• Cannot change the fill via script UI button color?

  I have simple scriptUI where is the button that calls the simple function. Function work correctly if I normally call out of button, but when I try to change color after clicking the button, nothing happened.

  I tried to change the average RGB simple and now I tested this CMYK version which is Forum. Nothing seems to work through this button. Function runs, but does not affect the colors. Am I missing something on scriptUIs...

  Please, anyone know where is the problem?

  #target illustrator
  
  
  //changeColor();
  
  
  function changeColor() {
  
  
      var docRef = app.activeDocument;
      var  col;
       
      var col = new CMYKColor();
      col.cyan = 2;
      col.magenta = 3;
      col.yellow = 15;
      col.black = 0;
       
      // Create the new swatch using the above color
      var swatch = docRef.swatches.add();
      swatch.color = col;
      swatch.name = "col";
       
      // Apply the swatch to a new path item
      var pathRef = docRef.pathItems[0];
      pathRef.filled = true;
      pathRef.fillColor = swatch.color;
  
  
  }
  
  
  createGUI ();
  
  
  function createGUI() {
      var win = new Window("palette", "Test", [150, 150, 460, 455]); // bounds = [left, top, right, bottom]  
      windowRef = win; 
      
      win.increaseColorBtn = win.add("button", [110,50,200,150], "Change");
      
      win.increaseColorBtn.onClick = function () {
          changeColor ();        
      };  
  
  
      // Create quit button and trigger for it
      win.quitBtn = win.add("button", [110,275,200,295], "Close"); 
      win.quitBtn.onClick = function() {   
          win.close();   
      } 
  
  
      win.show();  
  }
  

  Sorry, but you will need to use the BridgeTalk object when working with pallets.  How to make your script work is to do the type of window 'dialogue' and put redraw(); in your changeColor(); function to see instantaneous changes.  But you can access the rest of the user of AI interface due to the dialog box modal.