Pavilion HPE 150 t: I have a desktop Pavilion which does not connect to the internet all of a sudden

Similar Questions

• I have a aspire m3970 which does not connect to the internet.

  It will connect not wired or wireless. I tried two other other laptops with windows 7 that both will be connected wireless. Technician in AT & T was sent to my home to check it out. Verfied HE my problem is with the desktop computer after the help desk top and see that the laptps were connection. Given that the Office has a 802.11n LAN card came with the computer wireless, I need assistance troubleshooting, as a wired connection is also affected. Thank you.

  Welcome to.

  I'm sorry about your personal data, but... you can always learn something from the mistakes and... a backup is never a bad thing.

• I need to activate a computer but do not have a phone and it does not connect to the internet how to activate it?

  OK, so I have the disc and its application to connect to the internet or call but I don't have a phone and I have another computer. is there anyway that I can activate it online from another computer?

  Please see: How to find a phone number for a Microsoft Product Activation Center

• Have 2 computers and it does not connect to the internet, said we have 2 computers with the same IP address? Help please.

  We have two computers at home. High-speed at & T internet, Belkin Wi Fi and today one of the computers cannot connect to the internet and troubleshoot says we have the same IP address. How can I fix it? They both worked fine until today. Thanks for any help.

  Looks like you need to enable DHCP (Dynamic Host Configuration Program).  Follow these steps:

  -Open the computer in the Start Menu

  -Right click on network

  -Click on Properties

  -Click on to view the status of

  -Click on Properties

  -Click continue if she asks

  -Click Internet Protocol IVP4

  -Click on Properties

  -Turn on to obtain automatically IP addresses and DNS automatically get an address

  -Click OK

  -Close all open windows.

  Do the above on both systems and you should be set.

  Good luck.

• HP Pavilion a810n does not connect to the internet using ethernet

  Hi I have a HP Pavilion a810n and it will connect to internet via an ether net cable, although I'm sure that the internet and cable companies works as I used it in another computer. The connection to the network Local said there is a disconnected network cable when we open the network settings. Any help would be great... Thank you!

  You can try to uninstall the network card in your device manager, and then restart your computer.

  The computer should detect the original driver is detected and reinstall it at startup.

  You can also check the updates from pilot to hp.com support or by going to right click on your network adapter device manager and selecting update driver software.

  I hope this helps...

• Pavilion G6 does not connect to the cellular device

  I have a Pavilion G6 with Windows 7 OS, which is used as a mobile data terminal. I am trying to use my iPhone Verizon 5 c to connect to a hotspot. All my other HP laptops connect to this phone without problem, but the G6 does not connect to the internet via the phone with cable, wifi or bluetooth. The G6 recognizes the phone and shows it in "unspecified devices." I tried everything to get it to connect without success.

  Hey RC800,.

  Thanks for the info.

  I forgot to ask before, can you tell me the exact model specifications what do you use? For more information on the search for your model and product numbers, click here: How can I find my model number or product number?

  If the laptop connects to other devices, we can say that the material is very good. If he does not see the iPhone theres only a few things you can try. The adapter in your laptop is probably 802.11 g capable which is the minimum requirement for the hotspot iPhone, so we can exclude.

  Please, try the following:

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test another iPhone connection:
  Explicit. This will tell us if it's only an incompatibility with a phone or any iPhone hotspot. Try a hotspot Android will help narrow things down as well.

  Let me know if this helps.

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• My desktop under Vista Home Premium does not connect to the internet.

  I have an Acer Aspire X 1200 desktop equipped with a NVIDIA NForce network controller. About 1 week ago I was browsing the internet, Norton anti-virus popped up and told me to renew my subscription. Now, I've never had Norton on my computer and when you click Remind Me later, my internet crashed. Now the whenever I plug my ethernet cable in the box, it connects to my router Motorola 5BS101 surfboard, but it does not connect to the Internet. I am running Windows Vista Home Premium. I tried to run malware programs remover, thinking it was a malware, nothing done. I tried to run to remove virus and nothing. I tried to change the IP address to my my laptop was broadcasting, because the internet runs on it, but no results. When using the command prompt to find out what the problem is, it says the active IP routing: routing WINS unactivated: No. looking at the stats of network adapters, it says active DHCP: No. address IPv6 local link: fe80::15f9:58e2:c2d8:66e7 10%
  Autoconfiguration IPv4: 169.254.102.231. Also using ipconfig / renew, said the message DHCP is not enabled.

  Are you sure you never had a Norton trial subscription on your computer?

  Norton will do strange things.

  http://www.Symantec.com/Norton/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  Try to use the Norton removal tool.

  The computer you are using now if you have an Internet connection with the other > download / save > copy to Flash Drive > transfer / install it and launch it on the other computer.

  See you soon.

  Mick Murphy - Microsoft partner

• HP HPE 180 t does not connect to the Internet at startup

  Hoping someone can help, I had 1 cat and 3 service calls to HP with no luck.  It's a whole new HPE 180 t, 12 GB of RAM, HD 10 000 rpm option, GTX 260 card, etc.  It has Intel 82567V-2 Gigabit controller.  I use a Linksys WRT400N router and a new cable modem of Motorola SB6120.

  On the day of arrival only, HP had problems to connect to internet at startup or wakeup.  No doubt connects 1 on each tent 5-6.  I tried everything - reset the cable modem, router, release and renew the IP address, download the new drivers from Intel, etc.

  Very frustrating - and the thing is, I know that the network is working, because my old Dell 8400 is sitting here and it connects every time. It is connected to the same router, as does my laptop Dell 1545, no connection problems at all.

  HP support was not able to help.  So I have a brand new computer that does not connect to the internet 95% of the time.  Any ideas would be appreciated... THX.

  OK sports fans, keep your fingers crossed.  Come back from Wal-Mart, where I bought a router Netgear WGR614v10 to yestertech on sale for $34.98.  Came home, installed and everything works!  HP connects instantly connects Dell computer Dell laptop connects, works of modem cable Motorola...

  Tried everything on, off tension, different combinations of reboots, etc., in order to give it the toture test and hit the wood, everything works fine.

  Then, the last Linksys WRT400N router apparenly, which isn't on the list of recommended routers Comcast, will not work with this computer.  Now that I did a few Google searches on this subject, I find others who say the same thing.  I called an old friend of mine who is a type of network with the Federales and he said, what Comcast told him specifically NOT to use the router WRT400N Comcast internet service.  So go figure...

  I hope that this case is closed, and thanks for the help and suggestions of everyone and stick with me on this.  I hope that this thread will help others.  The largest that I can give to others is to ensure that you ask your ISP first to see if they have a list of recommended hardware!  Ciao...

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• Hall 13: HP pavilion laptop does not connect to the printer HP envy range 7640

  My laptop does not connect to my HP envy printer. It keeps saying the driver is not available or is it ready, but does not connect. I know the printer is working because I can print from my phone. Anyone know the driver I need to download or what to do?

  Ruizgeraldine

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problems with your Envy 7640 in Win10 printer and wanted to help.

  The problem is that by default HP print drivers installed by the upgrade of Win10 often do not work.  I have two HP printers and neither one worked after the Win10 upgrade.  We also receive a lot of messages of other people with the same problems.
  
  I linked the page drivers and software for the Win10 drivers for your printer: http://support.hp.com/us-en/drivers/selfservice/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  You must download and install the full feature software and drivers for the printer.
  
  Then unplug the printer and install the software.
  
  Do reconnect the printer until the installation program invited to do so.
  
  Once the installation is complete, restart.
  
  You should then be able to use your printer in Win10.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• I have an older iMac with airport wireless card, but it does not connect to the internet.

  I have an older iMac with airport wireless card, it sees my network but will not connect.  Any suggestions?

  Exactly, what iMac, what version of Mac OS X running?

• Outlook express does not connect to the internet! I have a connection for Internet Explorer; does anyone know wtf I am doing wrong! ??

  Previously I could not any internet connection at all, so all excited and then back on again! To conclude that, although I now connect to Internet Explorer, for some strange reason, I can now retrieve emails!

  If anything, I'm wrong dong - can no idea what, someone point me in the right direction? No point in communicating with BT (ISP) like all they will say is that I have a connection, if you see what I mean.

  Any help, really really appreciated

  What happens if you try to send you a message? He sent? Error messages?

  If you have a router, unplug it for 10 seconds and plug it in again. Give it time to reset and then do the same for the modem. Finally, close all programs and restart.

  There is no doubt in my mind that BT will say everything's fine, but my money is on a temporary server glitch and nothing on your end.

• I have uverse highspeed wireless modem. My office is connected to it and it works fine. My laptop connects to the modem, but does not connect to the internet.

  I tried to re-initializing modem and reload Explorer.  Any search engine will find internet.

  Hi Steveyy,

  1. you receive messages or error codes?

  2 have you tried to update the wireless card?

  You can read the following article and see if it helps:

  Setting up a wireless network

  Solve problems, find wireless networks

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• My iPad INM does not connect to the internet. I have the message of renewal of lease

  iPad version 9.3.2 (13F69)

  CAPACITY 12.6.GB

  I can't access the internet even if wifi connection is ok.

  I get the message 'renew lease', but does not work by clicking on it

  All other devices working normall

  How to reconnect?

  See: manually adding items to your device in this article to support > move content from iTunes on your computer to your iPhone, iPad or iPod touch - Apple Support