Windows 7, update for messenger, error 80070643

Similar Questions

• Windows cannot check for the error code 80070424 updates.

  I have windows vista premium x 64
  Windows Update stopped working and when I they do it manually it says windows cannot check for the error code 80070424 updates.
  I searched everywhere for an answer... Please help

  ----

• Vista premium sp2 updates fail with error 80070643 dt000

  Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

  Hi Ruth,

  Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

  Method 1:

  You can perform the steps described in the article.

  You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
  http://support.Microsoft.com/default.aspx/KB/958052

  If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

  Note: If you have already completed the steps in this article, you can go to the next method.

  Method 2:
  

  You may need to restart the Office Source Engine (OSE) service

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information helps. Response with status so that we can help you.

• Can not install windows KB973917 update and getting error code 8000FFF

  I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM.  I can't install the windows KB973917 update and getting error code 8000FFF.  I have tried everything to fix it, but have had no luck.  Someone had the same problem?

  A few suggestions here: http://taurarian.mvps.org/WU_Vista/8000ffff.htm

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

• Windows 7 update for Office 2003 error 0 x 80070643

  I have just completed an upgrade of Vista: P 64 Bit for Windows 7: P 64 Bit. Windows 7 updates went through until he gets these updates for Office 2003:

  Update of security for Microsoft Office 2003 (KB921598)

  Update of security for Microsoft Office 2003 (KB951535)

  Update of security for Microsoft Office 2003 (KB972580)

  Update of security for Microsoft Office 2003 (KB974554)

  Update of security for Microsoft Office 2003 (KB975051)

  Update of security for Microsoft Office 2003 (KB976382)

  Update of security for Microsoft Office 2003 (KB982311)

  Update of security for Microsoft Office Excel 2003 (KB2264403)

  Update of security for Microsoft Office Outlook 2003 (KB980373)

  Update of security for Microsoft Office PowerPoint 2003 (KB982157)

  Update of security for Microsoft Office Web Components (KB947319)

  Update of security for Microsoft Office Word 2003 (KB2251399)

  Update of security for Microsoft Works Suite 2005 (KB943973)

  Update for Microsoft Office 2003 (KB978551)

  Update for the junk e-mail in Outlook 2003 (KB2279246) filter

  Update for Office 2003 (KB907417)

  Update for Outlook 2003 (KB943649)

  If I try to install them together or individually or manually I get Message 0 x 80070643 or that the installation ended prematurely.

  I tried all of the suggested fixes, but nothing did.

  Help, please

  TaurArain:

  I worked on a work around for this customer which was to remove Office 2003. Once I removed the office, all other udates Windows worked without any problems. At this point, you can mark this problem as answered.

  Thank you

• Cannot download 10 windows XP and IE 8 security updates. for all error messages are either: 0x800700D and 0 x 8007002.

  Cannot download 10 windows XP and IE 8 security updates from microsoft windows update site. for all error messages are 0x800700D or 0 x 8007002.  Please help thanks.

  Thank you.

  Hi Pauli,

  See following documents to troubleshoot Windows Update error 0 x 8007002 & 0x800700D (scroll down to section fix it myself ).

• Don't have the Windows Platform Update for Windows Vista in Windows Update.

  I tried to download the new Windows Live Messenger Beta, but it tells me I need to download this update of the platform before I can install the Messenger. I looked at the support page for the update of the platform and he said I can get it from windows update, but when I bring up windows update and search for new updates, it says that my computer is up to date. What could be the problem?
  I have Windows Vista x 64 Home Premium and I downloaded Service Pack 2 from windows update.
  If anyone could help, I'd appreciate it, thanks.

  You will find assistance appropriate in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  NOTE: Read & guard this "sticky" before starting a new thread for help: http://windowslivehelp.com/thread.aspx?threadid=8a67c6f7-8a04-48d0-972e-1252034d6390

  Description of the update for Windows Server 2008 platform and Platform for Windows Vista update
  http://support.Microsoft.com/kb/971644

  QED: KB971644 "platform update" for Windows Live Essentials Wave 4 Beta or is there another? Looks like that same Windows Live Support does not know with certainty:

  CF. tried to install the new beta version of messenger, get a note telling me to get the latest update of Windows Platform (where support tells OP to ask for help in the Windows Update forum!)

  CF. platform Windows Update - can't see it!

  Search Windows Live Help forums on "update of the platform" also allow to get this thread (4 pages & culture) as a possibility: http://windowslivehelp.com/thread.aspx?threadid=f3145fce-81b1-405e-a40d-048245542d63

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I am at my wits end now ragarding Microsoft Windows vista update code "80070246" error Need help.

  Hello

  I have windows vista and for the last few weeks I can't get windows updates. I just get an error with this code 80070246 screen. It says 'never' most recent checks the updates and updates have been installed 'never '. I did the operation of Micorsoft update packages to prepare and package files autonomous but still no luck. I can't do this thing global installer that you burn it to a cd and run your windows disk with as I don't have vista or windows disk that the computer came with it installed, but no disc.

  Completely fed up that I can't install printers etc.. Ive tried to disable my internet security completely taken it out but still no luck so it isn't a firewall problem.

  Can someone please recomment something?

  Yes, this problem did start once my previous [subscription of the antivirus application?] has expired.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Tip: Contact the manufacturer of the computer for instructions on the use of the hidden restore partition (do not be confused with the system restore) to do a clean install of Vista.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Repost...

  Note: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows cannot update? Displays error 80096004?

  I have a HP presaurio pc windows vista 32-bit, could not be updated for more than a year, microsoft kept sending me things to try, I tried, but did not work and I am not this computer illerate. I ran a virus scan said no virus but, IE 9, which I just installed guard stop and freeze? I did restore several times I've lost count!

  Hi Blondie1955,

  1. who are the updates fail with the error code provided?

  2. do you get an error message when Internet Explorer hangs?

  Try the following:

  Step 1:

  Try the steps suggested by Shekhar S, since the following link for the issue of Windows updates and check if this can help:

  Windows 7 Build 7600, Windows Update failed: Error Code 80096004 (Applies to Windows Vista)

  Step 2:

  Due to Internet Explorer, try the steps from the link to the following article:

  Can't access some Web sites in Internet Explorer
  
  

• How to install windows platform update for vista

  I wanted to install windows live messenger on my laptop, I have windows vista edition sp2 family. Live Windows asked me to get the windows update for windows vista platform, I followed the instructions but couldn't find how to download the update of the windows platform, can someone help me. Thank you

  The update of the Vista platform consists of four updates KB971512, KB97513, KB971514 and KB960362.

  http://support.Microsoft.com/kb/971644

  It should be installed through Windows Update.

  The platform for Windows Vista update can be downloaded from Windows Update. To obtain these updates, follow these steps:

  1. Click Start , click all programsand then click Windows Update.
  2. In the navigation pane, click check for updates.
  3. When updates are found, click view available updates.
  4. Select the package to update that you want, and then click install.

  UTC/GMT is 15:02 Wednesday, February 22, 2012

• Windows not updated, I get error 80070005. What should I do about it?

  I recently checked my updates and it says that an error has occurred during the new updates. The error code I get is the 80070005 error one, even.

  I don't know what to do to fix the error. Any help would be appreciated.

  Hi Peter,.

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  Users have solved similar issue by following the steps indicated by the TaurArian, please see the link below for the steps
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8007005/67e5374f-7356-4542-a3b1-b1e910aea325

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Driver Windows 8 update for Laserjet P2014/P2014n, cp1215/1217, m1120/m1120n MFP and m1319f MFP

  Windows 8 pilots for the following products are not available at this time.  In the meantime, customers can install and use published Windows 7 drivers on full 8 Windows operating system.  However, the following known issues are listed below. Please note that this is a temporary work around, and clients are invited to download drivers Windows 8 as soon as they are available.

  

  Update the driver:

  M1005

  M1120

  M1319

  CP1215

  CP1217

  The above drivers are now available for download. Just click on the links to their product home pages.

  Update 5/27: Basic Plug and Play driver packages are now available for products p1005 and p1006 .

  6/20 patch: P2014/p2014n based on Plug-and-Play host are now available.

• How can I get windows xp updates for later use? What I have to do?

  I use Windows XP SP3 & Windows 7 Ultimate. How can I get updates so that I can install it even after reinstalling windows.

  I want this cause I have to reinstall Windows frequently.

  A much simpler and easier solution is to do a clean install and update and then create an image of your new installation, the next time you need to reinstall Windows you simply restore your image and update the image newly installed and then create an image update for the next installation.  There are many Imaging disc out there, many of them for free.  I prefer TeraByte Image for Windows (not free) for my imaging needs.

  John

• Windows cannot update the 80004002 error code.

  OT: Windows Update.

  I continue to receive messages that Windows cannot update and the 80004002 error code but I put t understand where to go from there. Help!

  Moved from Vista to install, upgrade and activate Forum.

  http://Support2.Microsoft.com/kb/943144/en-AU

  Method 2: Register the Wups2.dll file

• Windows 7 update for Windows 7 does not

  I know that people have had this problem before, I have tried the solutions found on this site still does not.

  I have Windows 7, 64-bit on my laptop. I think it's because I rarely use the laptop this problem started, since my office that I use every day is not. Anyway,.

  the last update has completed successfully, on 2 July 2016. the only thing that had installed the puisne

  Update security for Windows 7 for x 64-based systems (KB3150220)

  before this date the last complete successful update was May 4, 2016.

  I tried to update later in July and that's when he stopped completely. Hangs up on 'check updates' or 'download to 0%.

  This evening I installed update security for Windows (KB3153199) because it was the only person that I don't seem to have when I checked for solutions to installation in the other threads.

  I put my "never search for updates' advance and restarted. He is always hung up.

  Is there a solution for this nonsense?

  Windows 7 update problems? First read this.

  :)