Windows 7 - updates fail, receives errors

Similar Questions

• Windows KB2393802 update fails with error 0X8007054F code

  OS is Win XP SP3

  Looks like it was the first update of the usual pack that came out this week. It doesn't have the rest Pack updates succeeded.

  FWIT previous update was installed on 12/01/2011 KB890830.

  I rebooted, still failed. I tried to run the update directly from the windows update web page, same result. A Google search suggests that I'm not the only one to question.

  If you are absent the Shell for Windows (KB2483187) and updates to the kernel (KB2393802) and yet the previous kernel update (KB2436673) and the two latest updates of the kernel (KB981852 & KB2479628) driver installed. I assume that the previous update of Windows Shell (KB2286198) is installed.

  This suggests that you may have picked up an infection of W32/Alureon-varying rootkit since mid-December.

  1. Let's see what could detect & remove Kaspersky TDSSKiller:

  How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  2. If such an infection was detected and removed: open Internet Explore (only) tohttp://support.microsoft.com/kb/971058 & run DEFAULT inside difficulty modes and AGGRESSIVE; Restart & test. [1]

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update fails with error [error number: 0x800A0007]-which is not listed

  Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

  The other post:

  Thank you for your reply - but the problem persists - this is mopre complete info.
  The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
  Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
  As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
  Also your "Mr Fixit" was performed several times, but nothing changes.
  Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
  This is what is happening in the process of updating before it fails:
  Keep your computer up-to-date
  Check to see if you need updates for Windows, your programs, your hardware or your devices.

  Get updates of high priority (recommended)
  Select among the priority and optional updates for Windows and other programs

  ... and it does not matter if I say "express" or "custom" - headed then:

  Checking for updates for your computer...

  but fails after a few seconds with the same message as follows:

  [Error number: 0x800A0007]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  -However, it is the State of the system for more complete information for you:
   
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  MISCHU06BLUE system name
  System manufacturer Compaq Presario 061
  ED865AA - ABA SR1610NX NA540 system model
  System Type X 86-based PC
  Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MISCHU06BLUE\Compaq_Owner user name
  Time zone Pacific Daylight Time
  Total physical memory 1 024,00 MB
  Available physical memory 468,50 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.51 GB
  Paging file C:\pagefile.sys

  Please get us some help to solve this problem.
  What else can I provide?

  I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

  [This applies to your recent 'me, too' answer to another thread.]

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• Trying to save the Grand Theft Auto IV game and needed an upgrade to record with the error message: Windows live update failed 0 x 80080005

  Original title: games for windows live update failed 0 x 80080005

  Hello!

  I had to GTA IV the first time when I wanted to save my game play. I'm logged into my account and he said that an upgrade is needed to save the progress. So I tried to put up-to-date, but after 10 seconds, he said that a problem has been found. I need to check my internet connection (no problem). So for support windows if the problem remained. On the note it says 0 x 80080005 I don't know what that means.
  Please help, and I'll hope you'll know the answer.

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand you are trying to save the game Grand Theft Auto IV and needed an update to register with windows live error update failed 0 x 80080005. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps described in the links below and check the issue:

   

  Games for Windows - LIVE: how update by using Windows Update:

  http://support.Microsoft.com/kb/959864

   

   

  'Download failed' error:

  http://www.Microsoft.com/games/en-us/support/pages/downloadFailed.aspx

   

   

  Games for Windows LIVE errors:

  http://support.Xbox.com/en-us/Games/PC-games/games-for-Windows-errors-messages

   

   

  For more information:

   

  Xbox articles:

  http://forums.Xbox.com/xbox_forums/b/default.aspx

   

   

  Contact Xbox support:

  http://support.Xbox.com/en-us/

   

   

  Xbox LIVE Support:

  http://support.Xbox.com/en-us/Xbox-Live/browse?XR=shellnav

   

   

   

  I hope the above information helps you and your response is very important for us to ensure a proper resolution.

• Vista premium sp2 updates fail with error 80070643 dt000

  Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

  Hi Ruth,

  Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

  Method 1:

  You can perform the steps described in the article.

  You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
  http://support.Microsoft.com/default.aspx/KB/958052

  If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

  Note: If you have already completed the steps in this article, you can go to the next method.

  Method 2:
  

  You may need to restart the Office Source Engine (OSE) service

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information helps. Response with status so that we can help you.

• Update fails with error code 48 9.

  Original title: code9C48

  I get this update failed with... 9 ethical c 48... any information would be greatly appreciated... Thank you

  Hi TeresaReynolds,

  ·         Update fails with error code 9 48?

  ·         Are you facing this problem with a particular update or all updates?

  ·         Remember to make changes to the computer, after which the issue started?

  Try the following steps:

  Step 1:

  Temporarily disable the antivirus on the computer running software and check if it helps:

  Disable the anti-virus software

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset Windows components updates default and check to see if it helps:

  How to reset the Windows Update components?

  I hope this helps.

• kb953691and all updates fail with Error 8007000 b code

  I have a compaq presario pc sr5507f, all of the updates fail with Error 8007000 b code, when I start it up, he tells me that he don't find, msvcp71.dll, it will download internet 9 error code3715, it will be not to download microsoft lifecam 3.5 error, kb9953691, help help

  Hello

  You can check this link:

  Windows Update Error 8007000 b

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8007000b

• Update fails with error code 652 "WindowsUpdate_00000652" "WindowsUpdate_dt000" Is there a solution?

  Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688). UPDATE FAILS WITH ERROR 652, ENCOUNTERED AN UNKNOWN ERROR.

  Download size: 5.4 MB

  Update type: Important

  Jim,
  Take a look at this article and see if applies: Mike KB971187 - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can not install windows KB973917 update and getting error code 8000FFF

  I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM.  I can't install the windows KB973917 update and getting error code 8000FFF.  I have tried everything to fix it, but have had no luck.  Someone had the same problem?

  A few suggestions here: http://taurarian.mvps.org/WU_Vista/8000ffff.htm

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

• Windows update fails with error code 57 (KB951847)

  Windows update fails when it encounters an unknown error while trying to install the following:

  Microsoft. NET Framework 3.5 Service pack 1 and. NET Framework 3.5 Family Update (KB951847) x 86

  Installation date: 13/11/09
  Installation status: windows has encountered an unknown error: code 57
  Update type: important

  Recently, I made a recovery of the pc and reformatted my entire hard drive to the issuance of the plant.  Yesterday, I downloaded a standalone installer (KB947821) to see if that would help.  He did not.

  I would like to have instructions step by step on how to obtain this update to install correctly.

  Thank you

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  ===============

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in...

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows Installer '1603' (ignore the title, if necessary)
  http://support.Microsoft.com/kb/923100

  After running the tool that is appropriate and necessary, (re) install all versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 SP1 by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 SP1, reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Configuration of the windows updates failed, returning error Exchange

  I have a laptop windows 8.  Whenever I run windows updates, I get the error message "failed to setup of the windows updates, returning error changes.  I tried the windows update troubleshooting tool and download the updates manually but still no change.   Is there a solution to this?

  Thank you.   Often, when I try to run windows updates I get error like 80242FFF codes; 800703F1.

  Hi Zurkon,

  Thank you for your update on the issue.

  If you receive Windows Update error 80073712 0 x or 80073712, it means that a file needed by Windows Update is corrupted or missing. Windows has tools that can help you solve this problem of troubleshooting. I would suggest trying the following methods and check if the problem persists.

  Method 1: Run the Windows Update Troubleshooter

  • Run the Windows Update utility, then open Windows Update and try installing the update again.

  Method 2: Run the DISM tool

  1. Enter in the right edge of the screen and then click on search.
     (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click Find.)

  2. Enter command prompt in the search box.

  3. In the list of results, slide down on or right click command prompt, and then press or click Run as administrator.

  4. In the administrator: command prompt window, enter the following commands. Press ENTER after each command:

     DISM.exe / Online/Cleanup-image /Scanhealth

     DISM.exe / Online/Cleanup-image /Restorehealth

  5. To close the administrator: command prompt window, type Exit and press ENTER.

  6. Run Windows Update again.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Vista - Windows update fails, the error code 646

  My windows update failed code 646

  My windows update failed code 646

  Hey wagmalik

  Microsoft gave advice about your error code 646 in the microsoft below link

  http://support.Microsoft.com/kb/2258121

  Walter, the time zone traveller

• Error 80072EFE code keeps appearing after windows vista updates fails.

  Windows Vista problems

  http://support.Microsoft.com/kb/836941

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  Your error Code is mentioned in the link above.

  If the above does not solve it:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• When I download updates for Windows Vista, all 'important' updates install ok but all 'recommended' updates fail. Error code 80073712. How can I fix it? I'm not technical guide interested in plain English the fool would be appreciated.

  See above

  + http://support.microsoft.com/kb/931712
  The "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712" TaurArian [MVP] 2005-2010-implementation to date of Services