Windows 7-> upgrade of Windows 8 - Application Manager lost status of installed applications

Similar Questions

• WD5000AADS 500 GB hard drive. Windows XP Device Manager says it is installed and working properly, but it does not appear in my computer. Help!

  The disc was an external USB disk, but the fitting broke so I took off the adapter and I try to use it via its native SATA connectors. The disc is spinning and the computer know when it starts in Windows XP. It says new hardware found and go through the installation process. Windows finishes the installation, and says that everything is good with the world. I look in Device Manager and it says "this device is working properly" when I click on the drive properties. THEN..................... I click on MY COMPUTER and viola! No. DRIVE shown where the WD5000AADS should be there. There is nothing except my C: drive and my CD - DVD players.

  There are a few important (to me) information on this drive and I need to do.  HELP Please!

  Thank you

  twoiron

  Hi twoiron,

  • You are able to access the other USB devices on the computer?

  See the link below and run the Fixit tool available, check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  If him above fails tool Fixit check if the player is detected in disk management and has a drive letter assigned.

  To open disk management

  (a) from the start menu, click Run.

  (b) in the Open box, type diskmgmt.msc, and then click OK.

  If the drive is detected in disk management and the drive letter is missing, then assign a drive letter to the drive and check if that helps.

  How to change drive letter assignments in Windows XP

  http://support.Microsoft.com/kb/307844

• Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager)

  Since the update Windows 10, my CS5 Photoshop created jpg are no longer visible in Windows Explorer (File Manager).  I have reset Photoshop like application default for jpg files, rebooted.  Nothing has changed.  The ideas people?

  Hi R_Kelly,

  Hidden folder/file settings was the first place, I checked and kept checking each new reboot.

  I have copied below my temporary solution I posted in another forum thread.

  See point 7.  I found a way to make it visible again.

  1. I can see all jpg files created before Win10 update AND all the jpgs created by other programs, other than Photoshops after Win 10 update.

  2 Photoshop cannot see the newly created Photoshop created jpg files in the file picker at all since Upgrade to Win 10.  I've never had a problem of invisibility of file before winning 10 update.  My hidden files were always checked to be visible.  However, Photoshop can open if listed files in a basic text file search in Windows Explorer in the path of the file "recently used".

  3. the files are not visible or clickable at all in Windows Explorer tree or the Photoshop file selector. They become open and visible when listed in a basic text file search in Windows Explorer in the path of the file "recently used".

  4 Microsoft Office applications can't see the new Photoshop created Jpg files in file, only pre Win 10 update pickers jpg created by other applications and versions.

  5. the problem occurs only with Photoshop jpg created after the Win 10 update.

  6. I checked the settings "Show hidden files, folders and files of the operating system", and they remain as they were, which allows all the hidden to visible objects.  I kept the visibility settings files in this way since the early 1990s.

  Temporary fix below *.

  7. I did yet another simple search of the text Windows Explorer, he finds invisible jpg files less all links 'recently used' who were there yesterday (2nd day after I created the files), I checked the location of file properties file and it entered the original file I saved their.  Using a right-click of the mouse on the file to bring up the menu actions and file properties, I was able to copy and then paste the file into another directory.  I jumped on the directories to see if it remains visible and he (Yes). The new copy is now visible to the pickers of file in Photoshop and Microsoft Office applications.

  LizzyD

• The windows 10 ISO file will still work to upgrade my computer to Windows 7 after the date limit to install the free version?

  Original title: upgrade Windows 10

  I made an iso file for windows 10. I am waiting to upgrade until all the bugs are being developed. My question is: will the iso file of windows 10 still work to upgrade my computer to windows 7 after the date limit to install the free version?

  The ISO will work after the date limit, but you can buy Windows 10 after the date limit, if you don't improve and activate it before that date.

  Windows 10 is delivered as a service:

  Windows July 10 release - build 10240

  Windows Update 10 November - build 10586 (with many updates depuis.13,.29,. 36)

  If you want to take advantage of the free offer, you must do so before July 29, 2016.

  If you the newer versions are released before then, you can always download and install when it becomes available.

  You could also install it now then download updates via Windows Update as soon as they are available.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

  I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Windows 8 Applications Store does not update

  I had my computer since December. It's a Sony VAIO laptop preloaded with Windows 8. I had no problem with the store until recently. If I tried to open it, it would just go to the start screen and stay there. I was told to clear the cache of the store, so I did. I can now use, but my applications will not update and I can't, either. Two errors happen when I update; "Something has happened and this app could not be installed. Please try again. "Error code: 0xc80003f9" and "Before you can use the Windows store, you must restart your PC to complete the installation of an update." There is no such update when I restart or shut down my computer. In the section 'Your applications', he said, "we will have some problems to the list of applications you have. Please try again later. "How can I fix? I am a technical person who is skilled in the use of the computer, but I think that it is a problem with the store servers.

  Hello

  Thanks for posting your query in Microsoft Community.

  It appears from your description, you are unable to update Windows Store apps with 0xc80003f9 error code.

  I'll be happy to help you.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2 have you tried to run Windows Update? You are able to install Windows updates?

  I suggest to follow the steps below and we update on the State of the question.

  Method 1:

  Run the app from the link below and check off troubleshooter.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Method 2:

  I suggest you run the Windows Update Troubleshooter and check if it works.

  a. press the Windows key + C to display the bar of charms.

  b. type Troubleshooting , and then click solving problems under settings.

  c. now, type Windows update in the search option.

  d. click the Windows Update Troubleshooter to run the troubleshooter.

  This problem is probably due to apps being descended from the store for repair or upgrades. I suggest you to update the application after following the steps above.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Firefox asked me to upgrade my sound system & in the process, I have installed a Zombie and I can't uninstall it in Windows 7 via my control panel. Prva Nice

  Firefox asked me to upgrade my sound system & in the process, I have installed a Zombie and I can't uninstall it in Windows 7 via my control panel. I expected more of Firefox as a privacy feature!

  Sorry to hear about this, you should always beware of the pop-ups - never open or install anything, unless it is on the official website. Firefox has built-in features (and extensions that you need to find and install) to protect your privacy and security, but all users must still be careful with their browsing habits. You can report malicious links to the FBI Internet Crime Complaint Center here: http://www.ic3.gov/complaint/default.aspx

  You can also report false web documents by clicking on:

  • Help > report false Web, or
  • 

    >

    

    > Report false Web

  Regarding your malware, please follow this guide:

  • http://malwaretips.com/blogs/zombie-alert-virus/

  After removing your malware, consider extensions such as Adblock Plus.

• No Apple USB driver in Windows 10 Device Manager

  Is there a way to retrieve the Apple USB driver in Windows 10 Device Manager.  I downloaded the iTunes 12.3.3 yesterday and now he is gone.

  I tried

  • plug into each of my Apple devices (iPod, iPad, iPhone, iPhone 4S 6)
  • restarting my computer
  • disabled my virus protection software
  • synchronization with different strings (some Apple, others not)
  • my devices restart and try again
  • Uninstalling iTunes and reinstalling
  • Uninstalling iTunes and goes back to and older version
  • make a Windows system to a restore point when I could synchronize my devices

  My main problem is that I need to sync my devices and iTunes does not detect them without the driver.  Windows can detect my devices and they appear in the file Explorer.  I am also able to get pictures and videos I've taken off the power unit and on my computer with no problems.

  Anything else I can try?  I'm out of ideas.  Thank you!

  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Refer to the section:

  If you are using a Windows PC

  and read carefully.  Depending on your version of Windows the Apple Mobile device driver may appear in different places.

  Other than that, the General adzice is to demolish EVERYTING associated with iTunes and reinstall.  See excellent iTunes for Windows troubleshooting page located at turingtest2:

  Troubleshooting problems with iTunes for Windows updates

  especially the section:

  Remove and then reinstall iTunes and other software components

• How to manage Windows Vista power management features

  Hi guys

  I searched a bit in the technical knowledge of the Toshiba and found a very interesting article on Windows Vista power management features.

  * [How to manage Windows Vista power management features | http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm] *.

  The fact is that you will not find one tool of Toshiba Power Saver on Vista as on Windows XP laptops and the parameters energy saver is a bit hidden in Vista power saving settings.

  But you can also control some options as a method of cooling or power saving Mode.

  I think that it could be interesting for some people here in the forum!

  Greetings to all!

  Thanks JayJay.

• Satellite A300 - need to controller network for windows xp (Storage Manager)

  I got my computer from Vista to Windows XP Home edition home. I installed all my drivers except one: network controller. I can't find the driver for it on the toshiba site. Does anyone know where to find it and wich driver should I install?
  I have a Toshiba A300-PSAJ4E (1 to 9)...

  I couldn't intall the Storage Manager or the other. Is it necessary to intall? What is the function of this software? And where can I find one that can be intstalled?

  Are you sure that the network controller and storage manager are the same?
  If you see the Toshiba download page you will find everything you need there.

  Can you please tell us what exactly is your problem?
  Which WXP have you installed? SP1, SP2 or SP3 maybe?

• Not recognized USB-6251 (detected) to the MAX but is detected by the Windows 7 Device Manager

  Does anyone have a solution to our problem?

  USB-6251 is not recognized (detected) in MAX but is detected by the Windows 7 Device Manager.

  Is our configuration: Windows 7 (64-BIT), DAXmx 9.3.0f2, MAX 4,8 and USB-6251 (S/N 12B647A. P/N 194929 D - 04 L)

  We had a 'ready' indication/led the 6251.

  We tried several things... (all do not work)

  1. we have installed DAQmx 9.3 (for Windows 7)

  2. clean MAX Database by the following

  http://digital.NI.com/public.nsf/WebSearch/86256F0E001DA9FF86256FFD005B827C?OpenDocument

  Michael B.

  Yes the 6251 appears as a DAQ hardware.  Device charger OR placed in the auto-start services window.  We have refreshed MAX.

  Success!  I had to manually start the device loader.  Even if the service has been set to autostart, it did not work.  Right-click on the service shows that the beginning was selectable.  Click Start and the service began.  Start to MAX and can now see the device.  Open the front panel.

  How does the monitor devices OR running in the interface of the status bar to the device loader service?

  I don't understand why the service was not working.  Is it a security issue?  I am logged in as administrator.  I'll try once again as a normal user.

• MAX does not detect my instrument 488.2 GPIB-USB-HS, but Windows XP Device Manager only

  Hello

  I have a problem when you use the 488.2 GPIB-USB-HS, I see the device in Windows XP Device Manager, but it is not visible in the MAX, I do not see even a section for devices GPIB. However, when I try to install a new device, GPIB, the Wizard MAX tells me that it is one of the instruments GPIB installed on the computer which GPIB0 - USB-GPIB-HS. Do you know what is the reason to do this, because I want to use a multimeter in LabVIEW via GPIB, but I can't access it, I don't even see that there is a GPIB connection in the computer (in LabVIEW).

  Kind regards

  Alejandro Rodriguez

  It's the kind of old. Have you tried the last?

• Windows Update KB2434419 settles all Windows Live applications or just updating applications currently installed?

  Original title: Windows Update KB2434419

  W7 Home prem 32-bit

  Today, available through Windows Update KB2434419.  The download is 157.9 MB.  It is updated improving Microsoft Software 'Already' installed on your PC, or is it install all software listed under information updated?  I have not installed the update because there are listed software I don't want and wouldn't use... but if the update improves just these Programs already installed Microsoft... I would like to install it.

  Information here: http://blogs.technet.com/b/mu/archive/2010/10/20/windows-live-essentials-on-microsoft-update.aspx

  Quote-

  As you can hear, Windows Live Essentials 2011 is available. It will be available via Windows Update (WU) in the coming weeks, starting October 19. This software update will be available only to users who have activated the update via theMicrosoft Update service. For more information on Windows Live Essentials 2011 and why you want it,click here.

  Windows Live Essentials 2011 will be offered as an update that is recommended for users who have one product Windows Live software installed, otherwise it will be offered as an optional update. If you have configured your computer to automatically download recommended updates it will download automatically. After the download is complete, WU will inform you of available updates, and you can begin the upgrade. It will not install automatically.

  Windows Live Essentials 2011 will be offered through computers WU for Windows 7 and Windows Vista SP2. If you have not upgraded to Windows Vista Service Pack 2, then it would be the perfect time to take care of this task. Please note that you may need to install other available updates and Service Packs for Windows Vista before WU will offer to install Service Pack 2. Windows Live Essentials 2011 cannot be installed on Windows XP-based computers.

  Thank you

  Microsoft Update team

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• enable windows wireless connection manager

  I am installing a new wireless router, the installation disc tells me to activate windows wireless connection manager, how can I do this? Thnks

  Hello

  What is the brand and model of the computer?

  Follow these steps and check.

  a. click Start and then click Control Panel.

  b. click on network connections and Internet.

  c. click on network connections.

  d. right click on the wireless connection icon and choose Activate. (If already activated, proceed to the next step)

  e. right click on the wireless network connectionicon, and then click Properties.

  (f) at the top of the window, click the wireless networks tab.

  g. check Use Windows to configure my wireless network.

• Windows 0xc00000a5 application error

  I have this "windows 0xc00000a5 application error" error when you try to synchronize my phone, update my antivirus software, try to install chrome and other sites that require an update and a response.  I use internet exporer 9, it is set as my default and I am on Windows 7.  I spent more than 30 hours trying to get this sort, remove programs, virus check etc can someone come up with a solution?

  Hello
  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you turn on the computer in start mode normal such as suggested in step 7 of the above article.

  About google chrome, check out this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/0xc00000a5unable-to-start-correctly/a80f5089-5dc3-42E2-B12F-670264c4ef37

  Check if that helps.