Windows 7 XML SP2 not updated

Similar Questions

• Update Windows in Windows 7 will be not updated. Error code 80244008. Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  Update Windows in Windows 7 will be not updated.

  Error code 80244008.

  Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Security update for Windows XP $KB2686509$ will not update

  Security update for Windows XP $KB2686509$ will not update

  I tried the fix program tried to update several times but the foregoing, update will just not updated.

  Any help please

  Try cscript instead of scscript.

• MSNBC on Windows Media Center has not updated on 23 February

  MSNBC on Windows Media Center has not updated on 23 February

  I have seen a lot of posts about this, clock tried reseting, cleaning of temporary files, etc. nothing works. Is there no solution to this problem?

  Hello rewind,

  You can try and dump the old contents by using the following:

  Former clear content

  You will have to perhaps old content saved in the temporary folder of your browser that prevents you to see what's new on the pages of the site. To clear the temporary folder of your Internet Explorer browser:
  1. Close all browser windows and open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. In the tab general , in the temporary Internet files section, click delete files.
  4. In the Remove files window, check the delete all offline content box and then click OK.

  I suggest you notification to MSNBC at http://www.msnbc.msn.com/id/3303511/#Old%20content

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Media Center Guide not updated lists of TV of Zap2It passed tuesday.21.07.15

  Overview: Windows Media Center (WMC) is provided to ads of TV via the WMC Guide, of Zap2It.  If you go on the website of Zap2It TV listings *, about 2 weeks ago from future TV ads.  When the WMC Guide is set to day, & functions correctly, these same 2 weeks of TV programs are downloaded into WMC.  If we could use the Zap2It site to schedule the recording of television programs, then we would not need the WMC Guide to download.

  It is very early Sunday asof this announcement; the WMC Guide didn't really update for about 9 days... There's only TV ads through Tuesday, in about 3 days.  The update of the WMC Guide seems to work fine, it connects with the site or the source or whatever/where he gets the Guide of... but they say, "The PSE Listing is already up to date", even if, obviously, is NOT "up-to-date".  I'm getting now, 'you only have 3 days of registration!, you must update the Guide!' scare-messages every time I go to the WMC, and I click on update the Guide, but all also when I manually run it, just as when WMC runs automatically update Guide, it isn't actually updated!

  To be clear: I use Win7Pro64bit; -ALL-all the updates, Windows software & if not, are daily checked & constantly kept up to date; There has been no changes to the computer, & it works like a dream; WMC works the same, the update of the WMC Guide works exactly the same, the only exception being that, "that the EPG Listings package is already updated" thing, when he has actually updated the WMC Guide.

  So Please do not post those standard, boilerplate answers for updating Windows & or by disabling caches & or such other hoax explosive...  The problem is almost certainly with the Microsoft, Windows, WMC, Zap2It interface.

  You can go on the site Web of Zap2It * yourself!, go!, see for yourself!, the next 2 weeks of TV programs are here!...

  ... then, why are not those TV ads- already & always present -are actually downloaded to WMC?, why isn't the WMC Guide updated?

  ... Thank you!

  w

  [* http://zap2it.com/ | http://tvschedule.zap2it.com/tvlistings/]

  Hello hank1111,

  You can see this thread, including the recent responses, the bottom of page 3 I think:

  Guide not updated Windows Media Center

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-pictures/Windows-Media-Center-Guide-not-updating/8721f207-A694-43CE-bf38-6105968af080

  I'm NOT an expert on these things, but so are ' twisted my arm, I'd suggest the possibility of you as I did to RW:

  «If you still have your Windows OS CD maybe you could try to remove & then reinstalling Windows Media Center entirely?...» I don't know there's a way to do it, but you do not want explicit instructions of any part/whatever ' one who knows what they have everything.  Also, if it is possible to do a total removal/uninstall & reinstall, - vs - a sort of "repair", I'd do the full thing, that simple "repair" can let WMC Guide EPG old and outdated files that could bring you a right of return to the same sorry state of affairs! »

  ... hank good luck!

  w

• Windows 10 we could not update the system reserved partition

  I have windows 7 Home Edition premium, no idea why it says windows 10 we could not update the partition system reserved when I try and update?

  • Make sure you have enough disk space.
  • Although the recommended minimum requirements are 16 GB (32-bit), 20 GB (64-bit), if you upgrade from a previous version of Windows or a previous version, you will need to have at least 40-50 GB of free space to accommodate the installation files.
  • First run Disk Clean up.
  • Archive files rarely used to an external hard drive.
  • Consider data synchronization to OneDrive or similar online service and do a custom installation.
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Disable the general USB peripherals (for example - smart card reader).
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (e.g., USB sticks, external hard drive, printers, peripheral non-essential).

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Click on HERE to download ISO for 10 Microsoft Windows official media.

• Windows 7 Gadget weather not updated

  Hello

  I have a problem with the Windows 7 time Gadget not updating, steps, I tried to solve this problem.

  Uninstall and restore the Windows Gadgets
  Use another account
  Change the area I'm weather (this updated for this other area)
  Another gadget using weather (was nowhere near as accurate or good as the windows one)

  It seems to be stuck on the 11 degrees and sunny 24 hours a day

  If anyone has any suggestions I'm listening

  Thanks for your response, but simply using a Gadget different does not solve the problem I have, I want to use this Gadget

  I fixed it myself by removing the cache for all the gadgets and then reinstall said Gadget

  For any other person having this problem, here's how I did it.

  • Close the Gadget
  • Navigate to %LOCALAPPDATA%\Microsoft\Windows Sidebar\Cache
  • Remove all files & folders here
  • Re-install the Gadget
  • Problem solved (at least for me!)

  Additional notes
  If you need to uninstall the Gadget completely, you can re - install all of the Gadgets that come with Windows by following these steps

  • Click Start
  • Restore type in Gadget
  • Select Restore Gadgets installed with Windows Office
  • This will put back all the Windows by default Gadgets

• Windows Media Center could not update Playready after that kb3004394 has been installed.

  Windows Media Center could not update Playready after that kb3004394 has been installed.  I then uninstalled kb3004394 and tried everything I can find on the web for difficulty playready including this procedure

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/PlayReady-update-was-incomplete/8119d0a8-6106-489D-B5CB-4979a6a9ad0e

  and this procedure

  http://www.hydrous.net/weblog/2012/08/20/resetting-PlayReady

  Nothing worked and I'm pulling my hair out.  I use WMC with an HDHomeRun and a map of Time Warner cable.  This facility worked well for more than a year before installing this update.  The machine is a Dell XPS 8300 running windows 7 SP1.   I'm unable to watch all channels protected by DRM and I lost all my legally registered content.  It is a disaster and cost me 30 hours and counting.  Anyone have any ideas?

  I don't know your problem, but 3004394 has caused a lot of problems for a lot of people - https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-kb3004394-issues/ace25277-7f65-4486-bc44-c1b106907a18.

  Microsoft have apparently released an update of replacement/deletion for it - https://support.microsoft.com/kb/3024777?wa=wsignin1.0

  But to a few other posts on this forum, it seems to fix everything for everybody. If all goes well it can help you.

  If not, allows to see what MS themselves have to say.

• HPE pavilliion h8 - 1287c: updated freeze windows 7, printers do not update, updates does not, sleep does not

  I have computor windows desktop 7, pavilliion Hpe h8 - 1287c

  I think that I got the virus or malware.

  original installed drivers did not help, but when a driver installed my sleep is not work or light up the Start button?

  When it restarts it say out of reach and locks upwards?

  reinstalled windows 7 after upgrading windows install doesn't work or don't update in add printer.

  and the drivers install all having problem of scope.

  can't seem to get the windows update to work, update printers won't work, or try to download microsoft fix it won't work?

  sleep not to see the place on the start list?

  printers not updated will not work?

  I tried several update issues but does not?

  new total protection defense virus shows have no problems with viruses or malware?

  Thank you

  Tom

  out of reach, is no longer but windows update does not?

  only thing in the update is windows essentials?

  Tom

• Windows Media Player does not update album art and album info.

  I have a desktop HP Envy h8 - 1417c 64 bit PC and I've recently updated to 8.1 of Windows (from Windows 8 - entered loaded on the PC). After the update, Windows Media Player still works fine, but it doesn't accept new information when I try to extract one of my new CDs to the library of music and album art. It search in the internet and search the correct art and information, but when you click on accept, nothing happens. CD selections simply remain blank. I can still see the info from old files and art (before the update), so I know he kept what was already ripped. I also have a vague called music editing software yet (which works with Windows 8), and he finds no more album. Also, I loaded iTunes and have no problem to find illustrations of album and info with this program. Is there something that I am missing? I can't find anyone having this same problem on the internet. Thank you.

  Hello

  Microsoft technical support may be able to help you, 8.1 of Windows and Windows Media Player are not HP products:

  http://social.technet.Microsoft.com/forums/Windows/en-us/43f113c8-8e9d-483c-A18B-586266ec55b9/Windows-Media-Player-12-issues-in-Windows-81?Forum=w8itproappcompat

  Kind regards.

• Windows 7 Windows Media Center does not update Guide - new thread

  I get some data to Guide through 10/11, but most of the end of the 6/10 HD channels.

  Location - Richmond WILL

  Provider - Comcast

  It seems that the previous running thread, we had has been locked.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-Windows-Media-Center-not-updating-guide/beb7a0a7-4192-42A5-A621-1611dc3a3207?msgId=02accaa7-996B-41cd-9279-80bd3c573c33

  I hope that Barb and other will follow this one.

  Someone has already created a Connect ticket.

  https://connect.Microsoft.com/site1145/feedback/details/3104700

  If you encounter the same problem, 1) please vote only it upward and 2) let them know that you can reproduce it.

  I hope Microsoft can divert some attention from the wonderful product Media Center!

  I look at. NOW, it shows that blocked for me, but has no sooner.
   
  > Maybe I'm missing something
   

• Windows media player is not updated the name of the file

  Hello, I have a question for windows 12.0.7601.181.50 on windows media player 7, the problem is when a music file such as ' [Dubstep] Skrillex - in to kill him ' to ' Skrillex - in to kill him.

  It does not update the file name in the selection of windows media player.

  The WMP library works in mysterious ways and causes confusion - it took me a while to get the hang of it. WMP takes the news of the title of 'details' 'properties' rather than the file name, so I think that's what you need to change.

  Open the file in the wmp Library pane - right-click and select "open file location" then right-click again and look at the properties of 'details' tab to see his name here.

  You can actually rename the track in wmp (best place to do it - it will not mess up your library) hover over the title, right-click again and choose edit it - the title can now be changed.

  Let us know how it goes - R

• Windows 8 will be not updated

  My hard drive had to be replaced in my computer. He was initially under windows 8.1, and all updates were up-to-date.  It is on a 64 bit system. The seller has not received my disc of windows 8 and windows 7 pro has been installed.

  I have re-installed windows 8 pro and begun the process of updating the widows to restore to windows 8.1.  I was not able to be updated, as when the updates are installed, I am instructed to restart the computer. After the reboot, the updates are configured. During the configuration process, I get the message "configuration of the Windows updates failed, changes back, do not turn off your computer."

  Updates get to where all of a sudden, a message appears updates failed, he could go back to before you try to install the updates.

  I tried unchecking and manually install the updates. This latest effort, I unchecked all but the 5 latest updates, but where they installed quickly, and the computer must be restarted, a new message says "keep your pc connected until this is done, and it has started to install again to install all updates 171.» After he installed all the updates 171, at a time gave a message says "configuration of Windows updates failed, changes in recovery, do not turn off your computer."

  It is a vicious circle, and I can't get windows 8 update to 8.1 as before. Any help would be appreciated.

  Please run a check of system files (SFC) & DISM (if necessary) If you are on Windows 8 or higher 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Windows 8 applications do not update?

  I installed Windows 8 yesterday (October 27, 2012).

  Interesting... Microsoft still does not seem to include seamless integration / implementation and has some problems serious with the abandonment of recognized standards (POP3!) but that's another story.

  In the App Store, I had six applications that said that they had updates available. I selected all the and choose install.

  Nothing seems to happen... Green dots fly in the upper part of the screen, but nothing seems to be updated.

  My system date is correct, time is OK, everything is fine. I updated an application after the first installation of Windows 8, and he updated very quickly.

  These applications do not appear to be updated.

  Any ideas? The updater is so bogged down X number of people trying to update the same apps at the same time?

  I'm on Verizon FIOS and my internet speed is pretty darn good (download speed 77,96 Mbps upload speed 48,52 Mbit/s to Virginia to test the server in Pennsylvania) so I don't think that is the question.

  Here's how I solved my problem.

  The goal is to remove or rename the "C:\Windows\SoftwareDistribution" file located in c:/Windows. Usually, it seems that windows will not let you change the folder because other services are constantly using it. So I booted in safe mode.
  (1) search apps for 'run '.
  (2) enter "msconfig" in the box run and click on enter
  3) go to the tab startup and check the option "Safe Boot". Click ok and then click on the option "Exit and restart" after that.
  (4) once you have started using safe, go to C:/windows of your applications to search for 'Computer' and navigate well the c: / drive.
  (5) you should see a folder called "C:\Windows\SoftwareDistribution". Rename it to 'SoftwareDistributionOld' to be on the safe side in the case where you still need.
  (6) repeat steps 1-3 to return to the secure boot option. This time, uncheck and then quit and restart.
  When you start to save, open the app Store of Windows and click on the update notification. I hope that you will be able to attend your applications up-to-date perfectly!

• Windows Server 2003 SP2, not bootable iso

  The downloaded ISO file of TECHNET is not bootable, how can I make bootable so that I can create a virtual machine from him.  Pleae be explicit as to how I can make the ISO bootable, or, how I can use the ISO file to create a virtual withput machine it is bootable.

  I just took a glance on the MSDN web site. FFL you downloaded is "Windows Server 2003 Service Pack 2 (x 86) - CD (English)" that contains only the updated SP2 files. What you should look for is a file named for example en_windows_server_2003_with_sp1_standard.iso 'Windows Server 2003 Standard Edition with SP1 (English)'.

  André