Windows 8 creates horizontal tear in dual screen

Similar Questions

• Dual screen on Windows 7

  Hello

  Currently, we are trying to have our view Windows 7 virtual computers running with double screens on our Wyse V10L thin client. (using cables dedicated)

  It works fine, but the VMs system see the desktop as a large, with a huge resolution (depending on which screens connected behind)

  Thus, when you click on open a windows, it opens on the entire desktop, covering two screens...  (instead of one..)

  Are there Windows 7 special settings that we should put in the configuration of virtual machines?

  all integers (ints)?

  Thanks for your time and your answers...

  After a contact Wyse supports only Windows 7 Enterprise or Ultimate can make the need

• 15 HP smart touch: pink and green line Horizontal on my touch screen 15 HP smart

  Hello

  I'm having this problem a few months ago August 2015 rose with a combination of a green horizontal line appear in the middle of my screen with in a few days later the line moved to the taskbar line I said to my self "Yes, I can work with that " so only a few days ago lines moved an inch higher in my screen and there are now 3 horizontal lines of suggestions and you can tell me how can this happen?... and oh... the screen below the line is like flikering? I don't know if that's the word line move fast doward... are pictures 2 on 2 August from Nov.

  This is my system:

  PC laptop Touchsmart HP 15

  OS: 8.1 with Bing 64-bit Windows

  Serial number: [personal information deleted]

  Product number: J8A22UA #ABA

  I just got this laptop on June

  

  Hi @Sldvrojie,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post, and I understand that you have several horizontal lines on the screen of your laptop. I wanted to help with that.

  Here is a document that you can use for troubleshooting:

  HP Notebook PC - troubleshooting an issue of LCD for laptop

  Let me know if you need more assistance.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, so problem solved, so that other people that you have the same problem can see.

  Kind regards

• Satellite Pro M10 - horizontal lines on the screen in different areas

  Hi all

  I hope someone can help.
  My Satellite Pro M10 seems to suffer a display problem where I have horizontal lines on the screen in different areas.
  It would be well for 10 minutes and when the laptop seems to warm up this problem begins, then shortly after
  The laptop would crash and enter in a resolution of 800 x 600 16 colors or sometimes freeze.

  Graphic drivers have been resettled, and even a new installation of Windows XP from the recovery CD does not help.
  A reboot doesn't solve what the same thing happens again and after one minute of use, so I thought it might be a video or cooling problem.
  I changed the video card I had a spare part of my last motherboard hoping this would solve the problems, but the problem persists.
  Perhaps a cooling problem? Or problems of motherboard?
  The motherboard has been replaced twice, hoping that this isn't another mobo problem.

  Any advice would be great.

  Thank you.

  Hello

  I m not 100% sure but to me it looks a bit like an overheating problem
  Maybe the graphics card may not be properly cooled after a certain period of time and that's why these strange horizontal lines appear on the screen.

  I wonder how you were able to replace the graphics chip on the motherboard?  :|
  If I m not wrong not the chip is fixed and the replacement is very easy and difficult

  It of always difficult to say what's maybe wrong without running several diagnostic tests in most cases this problem may be related to the defective chip or motherboard and so the following should be checked

  Sorry, but that's all I can suggest.

  Best regards from my friend

• Horizontal lines on start screen

  I started to get horizontal color lines when my computer starts. They sometimes completely hide the Welcome screen, but once I managed to log on all the normal functions are not affected. Someone told me it may be dust affecting the graphics card and the computer may need a cleaning on the inside. Does anyone have ideas, what is the cause before you call me an engineer and end up spending money that I can not ned to.

  Hello CliveDH,

  Thank you for the question!

  I'm sorry to know that have problems you with the display. As I understand it, you get a horizontal lines on the screen.

  I need to ask you some questions to help you best.

  Download and install display drivers and check.

  Update a hardware driver that is not working properly (Windows Vista)

  Meet us if you experience problems with display or any other problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• white horizontal line on my screen.

  I need your help. My laptop is Hp Pavillion DV5-1235dx. with windows vista home premium OS inside.

  Recently, there is a white horizontal line on my screen and I don't know how to remove it. Please tell me what is the

  problem and how to solve it. Besides I used my laptop for two years now.

  Hello

  486 wrote:

  If I connect to an external monitor, I don't see the same white line. hope that you would give me a solution to this

  problem of mine. TNX

  This means that the LCD screen of your laptop will have to be replaced to solve the problem.

  External display display normal display shows that the solution to video display inside the laptop (integrated in the chipset or graphics module) is operational.

  Best regards
  ERICO

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to manually create another resolution of the screen?

  How can I create another resolution of the screen manually which is not available in Windows 7?

  I recently installed Windows 7 Professional 64-bit with 1 package of Service on my MacBook Pro 17' via bootcamp.

  I want to create a screen resolution 1680 x 1050 because of 17' manually but am not able to do. Hight resolution proposed is only 1600 x 1200 and the results are signs and distorted images.

  How to change the screen resolution correctly? Updates Windows (more than 200) that are not installed so far for it takes very long time will help?

  Do I have to install an additional specific driver?

  I did two things both of samt: I installed all Windows updates and I've updated the PnP Monitor driver. After a new start in Windows 7, the screen resolution was automatically correct (1920 x 1200).

• My laptop thinks that he is in dual screen mode.

  Last night I tried to connect my Dell XPS 17 laptop to my TV via the HDMI port and I would get "No signal" on tv as if she didn't even know that the HDMI cable is connected. I failed her and finally found that there was no sign of my Nvidia graphics card in Device Manager (I had problems before graphics card.) All I had to do was update the driver and the new software has been installed and both monitors worked well.

  Since then, after I disconnected my TV, my laptop randomly enters a dual mode screen in which "projector only" must be engaged because my screen goes black but I still audio. Need me 5 minutes to continuously hit Fn + F1 to switch screens where I can hit the windows key + p and return to the screen only. It seems that the times, he jumps in to start, restart, or after hibernation. He also did this when trying to play a powerpoint that would usually play right on the screen of my laptop without problem.

  Any Suggestions?

  Hi James,

  Thanks for posting your query on the Microsoft Community.

  This problem could be due to incorrect parameters or if the display drivers are not updated.

  I suggest you follow the Microsoft help articles below and check, if this can help.

  Guided Help double configuration monitor, please refer to the link.

  http://support.Microsoft.com/en-us/KB/976064

  Work and play better with multiple monitors, please refer to the link.

  http://Windows.Microsoft.com/en-in/Windows7/work-and-play-better-with-multiple-monitors

  Hope this information helps and let us know the State of the question, we will be happy to help you.

• Dual screen monitor - bad resolution options

  I have a Dell Latitude E6420 running Windows 7 Professional 64 bit which I use to several jobs in various locations.  Most have a docking station connected to one or two screens (one VGA, one DVI).  I run dual screen as often as I can, so, even at a workstation with a single monitor, I use the screen as a second monitor.  I also give presentations from my laptop, usually via a VGA connection port of the laptop.

  There is a special meeting room which has two screens plasma inside that depend on a VGA connection (must therefore always show the same performance and appear as the single monitor when connected to the laptop).  I use a lot this room.  Until recently, when I plugged it monitors would show an image full screen to ordinary resolution (800 x 600 or 1024 x 768).  I use these as secondary monitors, with my laptop as main screen.  I have check all monitor activity through the interface of the Intel HD 3000 graphics driver.  The pilot is the last available from Dell (9.17.10.3040).

  However, now when I plug in this House, secondary monitors show an image in a hurry (abscissa) and the single resolution options offered by the pilot are 1366 x 768 and 4 x 3.  Yes, FOUR by THREE pixels.  None of these are the native resolution (which should be 1024 x 768).  Nothing I can will get monitors to display full-screen with good resolution.  My colleague, with (in theory) the same laptop has no problem.

  There also seems to be some sort of cache or memory for monitor configurations.  Whenever I drop down to a workstation, Windows automatically configures the monitors in the way they were last time I was there (so with the monitors in the correct locations, resolutions, etc.).  Is it possible to reset this memory, so that I can start from scratch?

  Hello

  Please contact Microsoft Community. I imagine the inconvenience that you are experiencing right now. The issue you described can occur due to the incompatibility of the display drivers. So let me help you with that.

  You did changes to the computer before the show?

  I suggest you to follow the steps mentioned below and check if it helps:

  Uninstall and reinstall the display driver

  First download the display driver and save it to the computer. You can download the latest driver to display from the link below.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=XGPWM

  Uninstall the display driver, then reinstall it. Follow the steps mentioned below to uninstall:

  1. Press Windows + R, type devmgmt.msc , and then click ok.
  2. Search now and do a right-click on the display driver , and then click Uninstall.

  For your reference, you can check the links below.

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  Hope this information is useful. Please get back to us if you need further assistance.

   

   

• Problem dual screen ' after working for a while, the screen of my laptop turns off.

  Original title: Problem dual screen

  I use two screens (laptop screen and separate screen) to work. Windows 7 operating system. After working for a while, my laptop screen goes blank as if he goes to the standby mode. The monitor never goes out. Is - this cos win 7 does not support the spl double screen laptop computer and monitor at the time of amse?

  Support COMPUTER told me he can't stand not and laptops are not designed to function as a two screens? Please notify.

  KR

  bs3dm

  Portable computers support two monitors. The problem may be caused by two reasons:

  1. incorrect power setting.
  2. the problem with the drivers.
  1. you can download and open Microsoft Fix it for the question.
  2. update the display drivers. If no update is available, uninstall the drivers (and software), restart the PC, install the drivers (and software), restart the PC and then check.

• The horizontal lines of the screen problems

  Hello

  Since I use Windows 7 X 64 on my T500 2241, I have problems with many small horizontal lines on the screen. The same one I have on an external monitor. With Win XP 32 bit, I never had such problems on this computer.

  May that this problem is related to the video driver. I use: Intel Mobile 4 Series express chipset driver version 8.15.10.2302. I had the latest bios update for my computer.

  Nothing helps. Y at - there a better idea?

  Thank you very much

  Michael

  Hi, I found following:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-74739&selectarea=support&tempsel...

  It works

  Thank you

  Best regards

  Michael

• Windows 8.1 stuck in repair automatic screen

  Separated from this thread.

  Hello

  I am facing the same issue.

  After following your advice, there is more to what I get.

  auto repair it asks me to "select a target operating system", with an option Windows 8.1.

  After clicking on the Windows 8.1, it is said... this option is not taken in charge selected system. To which I must simply click on "Cancel".

  This brings back me to the screen "choose an option!"

  Help, please. What should I do? I don't want to lose all the data that are in my laptop at the moment.

  Hello Coonut,

  Thank you for your response.

  I appreciate your time.

  As "rachanakandari" said that you have to burn the disc on another computer, you can create Windows 8 discs using the steps described in these articles.

  Reference:
  The upgrade of Windows with only a product key
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  Create an installation media for Windows 8.1
  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  I hope this information helps.

  Thank you

• The images appear horizontally stretched on wide screens

  I am facing a problem where the pictures are horizontally stretched on wide screens. Is it possible to make them appear correctly on all screen resolutions? as the detection of the resolution of the monitor of the user and apply a script or something.

  If it is stretched, one of two things happens.

  1. the monitors are not configured correctly.

  2 and by far the most likely, who created the design did a screen which was not established to the appropriate resolution. It may have sounded good on this machine, but it will look horrible on each other.

  Edit: If you are the one creating the graphics, make sure that your monitor is set to its native resolution.

  Bob

• installation of El Capitan in a mac by usb, but only using windows to create the USB

  installation of El Capitan in a mac by usb, but only using windows to create the USB

  I'm having a problem to install el capitan on a mac book pro 2009 has changed (dead) to an ssd HARD drive

  I can't find that any information how to do this from a windows machine (now only available) of the old system had the lion as I was told and when trying to install lion line or wireless it says it isn't available now so the machine is stuck without an operating system.

  If you are anywhere near an Apple Store, I would suggest bringing your MBP to and asking to help. For USB, you need to partition and format to allow to boot on a Mac, what Windows can not do. Then either create a bootable installer or install OS X on USB and then copy the installer it, boot from it and run the installer with the SSD as a target.