Windows 8 light blue error screen. Whenever I boot computer Acer laptop

Similar Questions

• Windows 8 Light Blue error screen: your PC Ran into a problem and need to restart

  Every once a while I reboot my windows, I had a light blue screen that says "your PC came across a problem and the need to restart.
  Is there anyway I can know what is the problem, I don't want to reinstall windows again, please help
  Here is a link of my Minidump files:

  https://SkyDrive.live.com/redir?RESID=38EC4E1D886E0DA8! 105

  Thank you!

  The minidump files showed a BAD_POOL_HEADER stop error (19) caused by the MacHALDriver.sys:

  BUCKET_ID: 0x19_20_MacHALDriver+ 1714

  Bootcamp.exe is the process that blocks.

  Try the following link to get suggestions for this problem:

  https://discussions.Apple.com/thread/4466080?start=0&TSTART=0

• DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys) Blue error screen to restart the computer

  Hello

  I recently bought a new laptop refurbished and I have a problem from the appointment. I bought the laptop yesterday. It's a Sony Vaio Fit 15 E, 64 bit with 8 pre-installed Windows. There are times when I get a blue screen with a sad face that just explains that an error has occurred, the error is: DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys). It mainly occurs when I try to use torrent software. I did the excessive thread lurking on the various sites looking for a solution to the problem but nothing I try works.

  Some forums have said it is this need to updated drivers network card, but when I check updates told me I have the latest drivers. Other forums suggest that this is a problem with McAfee drivers interfere. McAfee has been pre-installed, but I uninstalled all McAfee products manually and then used Development to remove all McAfee software are still hiding on the laptop which, according to him, has worked. I installed Malwarebytes and AVG also and I tried to remove them and try again to see if it was the issue, but even when deleted the error kept appearing and the computer crashing.

  I don't really know what is the cause and every time I try a suggestion from other sites they do not solve the problem. I downloaded the minidumps on my laptop here down, however I don't know how to read or do analysis. Is there someone who would be able to help me?

  The Minidump files: https://drive.google.com/folderview?id=0B3gAlOZ6dvu8MG5LWjh5cHFQOG8&usp=drive_web

  Thank you

  Roisin

  Hi Roisin,

  All attached files of the DMP are the bug check DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  -FAILURE_BUCKET_ID: X64_0xD1_tcpip + 138ac3

  ^^ tcpip.sys is labeled as the fault, but it is not the real cause of the accident. There is something of cause of NETBIOS conflicts. In addition to debugging shows the crash of coherent process following each crash dump:

  -Nom_processus: mbamservice.exe

  ^^ Malwarebytes.

  That being said, AVG is at the origin of conflicts with Malwarebytes. Regardless of whether you're a suite antivirus and the other is antimalware, both are active protection and try to install their interceptors to the kernel for analyzing critical data. Because of these two active protection software tries to do this, the conflicts are happening.

  --------------------

  Remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes, as it is in conflict with Malwarebytes:

  -AVG removal http://www.Avg.com/us-en/utilities

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  Kind regards

  Patrick

• Get the Blue error screen when starting the computer XP, stop: 0X0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  I get the same code at startup until you mean?    Stop: 0x0000007B % 20(0XF789E524,0XC0000034,0X00000000,0X00000000)

  0x7B bug check code
  http://msdn.Microsoft.com/en-us/library/ff559218 (v = VS. 85) .aspx

  The boots are sometimes successful and sometimes not?

  If you you do not want to lose any data, make sure you take a backup on removable media before trying to solve the problem.

  Select Start, run, type cmd and press ENTER. Type "chkdsk c: /f /r" without the quotes and press ENTER. Make sure you include the spaces indicated. Enter Y when asked if you want to run chkdsk on restart the computer. Quit and then restart the computer.

  Marking bad sectors on a hard disk takes time so be patient. Delimiting does not repair a defective sector. He places pointers to the reader by saying the system not to read or write to these areas that have been damaged.

  If the number of defective sectors continued to increase after using the procedure above several times, then you should replace the disk. If an important system file is written to a bad sector, you can corrupt the registry hives and lose the entire contents of the disc.

  However if have run chkdsk you not see more new bad sectors, then the reader can work for you for years.

  What is your computer brand and model? You have a Windows XP CD? It's a detail. Generic OEM or OEM brand copy. Suppliers of computers brand often give users a copy of Windows to a recovery partition. That applies to you?

  Take a look in the system log in the errors and warnings event viewer and post here the copies. Do not post on more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

• When you start to print on the hp 6100 the computer stops and a blue error screen

  Starts to print on the hp 6100 the computer when to stop an a blue error screen appears, and the computer must be restarted? Help this is driving me nuts.

  Hi William,.

  Do you receive an error message or error code?

  Blue screen can be caused by hardware and software issues.

  Try the following and see if it helps.

  
  Method 1:

  Try to uninstall and reinstall the printer drivers and check if it helps.

  Uninstall a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Install a printer: http://windows.microsoft.com/en-in/windows7/install-a-printer

  Download HP drivers and software - specify product name

  
  Method 2:

  Refer to the steps in the following Microsoft article and check.

  Resolve stop (blue screen) errors in Windows 7:http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Notes:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

  
  Note: I suggest you to provide us with the Mini Dump files to get a better understanding of the issue.

  Follow the steps to copy the contents of the minidump files:

  (a) copy the contents of \Windows\Minidump to another (temporary) location or anywhere on your machine.

  (b) zip copy.

  (c) attach ZIP archive to your message by using the button (attachments) "trombone".

  (d) please upload them to a service like Skydrive file sharing.

  You can view the following link to find out how to send the files minidump using Skydrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Keep us informed on the status of the issue.

• Recovery of data after the Blue error screen?

  My previous HD in my desktop Dell XPS410 gave me a blue error screen saying "unmountable boot volume". I tried to do the chkdsk scan but that just stayed on message "to examine the bus." Is it still possible to recover the data than HD? He was not making any noise just the error message.

  userx_076

  Procedures easier to transfer files and folders, is to remove the hard drive from the XPS 410 and you use a similar USB adapter then attach the hard drive to a USB port on a work computer, then try to transfer the files and folders that him.

  Note: Only the data files and folders can be transferred, the programs, utlities and applications need to be reinstalled from their CD or downloaded from the website of the Publisher.

  Bev.

• Satellite L675D: Blue error screen after upgrading to Windows 8

  Hello

  I recently updated my laptop to Windows 8 Toshiba and whenever I use it, after 5-10 minutes, I get a page of the Blue error screen and restart the laptop.

  The problem is really annoying.

  I discovered that if I plug the battery charger, the phone works normally, but I want to solve the problem correctly.

  What should I do?

  I m wondering about your model of laptop. What cell phone do you have exactly?

  Regarding your question:
  I would like to get this right, with the battery it works ok, but when the AC adapter is plugged, it crashes?

  What happens when you connect the front adapter from the laptop would be turned on?

  How have you installed the Windows 8? Move the laptop Win 7 to Win 8 or have you installed Windows 8 clean system?
  Are installed all the drivers Toshiba Windows 8?

  Another idea:
  Go to Windows 8 Device Manager and uninstall the device called compatible ACPI control method battery
  Restart the machine and check how it works.

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon

• Windows XP Service Pack 2 is installed correctly, and then on reboot I get a blue error screen or green

  Windows XP Service Pack 2 is installed correctly, and then on reboot I get a blue error screen or green.

  The only way that I could finally restart, was safe and then I restored to before I installed SP2.

  WinXP SP2 must have been installed more than four years ago.

  If you haven't installed SP2, you could not possibly have a functional application of the antivirus installed so see...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State course: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Wish I had better news for you.  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue error screen that says windows has been shut down to avoid damage.

  Help, please. We have an office that works under windows xp and we receive a blue screen error message. I need help running system restore because it does not run windows if it keep windows shut down and leaving me with a blue screen error message.

  We need to know what the Blue error screen and if it referred to specific files and/or numbers. Also, please include a description of your computer and its recent history.

  http://www.Aumha.org/win5/kbestop.htm - Stop errors

  MS - MVP - Elephant Boy computers - don't panic!

• Blue error screen Windows 8 - Code 0 x 0000001

  Hello

  I turned on my PC yesterday and it displays a blue screen error with the details below

  Recovery

  Your PC could not start properly

  After several tests, the operating system on your PC could not start, so it needs to be repaired.

  Error code: 0-xC0000001

  You will need to use the tools of recovery on your installation media. If you don't have any installation (such as a disc or USB) media, contact your system administrator or the computer manufacturer.

  Press Enter to try again.

  Press F8 for startup parameters.

  If I press Enter to try again, the Windows logo with points appears briefly before the screen goes black and nothing seems to happen.

  If I select F8 and try to start safe mode I get a pop-up box "Windows is unable to complete the installation in Mode without failure. To continue installing Windows, restart the computer. »

  Yesterday, I was able to get the recovery options where I chose Restore (not too worried for my files at this point) and the screen showed he was recovering but when it reaches 100% it went to a black screen and nothing happened for a long time. Now it's back to the Blue error screen.

  I have no installation media but I do not have a backup of my files and I think that partitions etc. on a USB key.

  Can someone help me with this?

  Thank you

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you get a blue screen with an error code.

  This could be due to corrupted display drivers or system conflicts.

  I suggest that you want to run Startup Repair by using the installation media.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Try to repair the Windows 8 Windows recovery environment installation media boot (WinRE) and check.

  To repair boot on your computer, follow these steps:

  a. Insert the media (USB or DVD) and restart your computer.

  b. press the F12 key (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.

  c. once the Windows Setup window appears, follow these steps:

  d. click Next and select repair your computer.

  e. you will see an option to choose and then a blue screen. Choose the Troubleshooting option and select Advanced options.

  f. you can choose StartupRepair of the advanced boot option.

  (g) follow the on-screen instructions to complete the Startup Repair.

  Once connected to your system, I suggest you to install the drivers to display on the manufacturer's website and check if that helps.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Windows 8 freezes and gives the Blue error screen every hour approximately

  Hello guys. I have a problem with my system: windows 8 freezes and gives the Blue error screen every hour or more. usually it freezes, displays a blue error screen (clock watchdog timeout knode or not handled exception or something on a system request), I force restart it, and then it happens again (sometimes 3 - 4 times in a row, then it will be fine for another time). Here is the link to my dump leader : https://www.dropbox.com/s/uv27xr54esjlen0/MEMORY.DMP?dl... . The machine I built myself: amd fx 8350, card mother m5a97, dvd - r, 1 ssd, 1 hdd, PSU 500w, gtx 650 ti video. Also, here is a report of CPU monitor ID: https://www.dropbox.com/s/k1ma0m6maap404q/HWMonitor.txt... . I have already done all the windows, direct x updates and drivers and ran ideas
  If anyone has advice like how to do to solve this problem, please help me because I'm going crazy.

  Thank you.

  AS

  DMP file is corrupted and useless.  Please reconfigure your system for dmp files small as described in this wiki

  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  Please provide us with your administrative Event Viewer logs by following these steps:

  Press Win + 'R' and type eventvwr > enter

  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip for Onedrive or a file sharing service file and link to it in your next post

  *

  If you have updated to win 8.1 and you get the error message " " " the system cannot find the specified file" it is a known problem.  The work around is to change the registry.  If you are not comfortable doing this DON'T.  If you are, save the key before making

  Press Win + 'R' and enter regedit

  
  Navigate to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/analytical.

  
  

• My Pc fires up to the home page and then the screen turns white, blue error screen

  When the screen is blank I have to manually turn off and restart several times before it will work.

  can someone help an old age pensioner please.

  Hello

  1. the question occurred once more after you've done a system restore?

  2. What is the full and exact error message?

  If you still get a blue error screen, I suggest you refer to the articles and check if that helps:

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

• Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

  Had sent the message about the Blue error screen.

  Has been asked for more details.

  I hope this helps.

  BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

  BCP3: BF90DB41 BCP4: 00000000

  OSVer: 5_1_2600 SP: 3_0 product: 768_1

  Hi VASANTHFERNANDES,

  ·         You did changes to the computer before the show?

  ·         When exactly you receive the blue screen error?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Disconnect all external devices and check if the problem persists.

  Method 2: Start the computer in last known good configuration and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  Demystifying the 'Blue Screen of Death'

  http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

• "blue error screen", while using the web camera program

  Original title: available RAM

  I need 256 and I get a blue error screen when I try to run the program for a Logitech webcam.  How can I determine the amount of RAM available on my computer?

  Hi Bauerwoods,

  1. Did you the latest changes on the computer?
  2. What is the error message on blue screen?
  3. What is the name of the program that caused the blue screen on the computer?
  4. What is the model number of the Logitech webcam?

  See the articles below and check if it helps.

  How to set performance options in Windows XP

  http://support.Microsoft.com/kb/308417

  RAM: Add memory to your computer

  http://www.Microsoft.com/athome/Setup/addmemory.aspx