Windows 8 stuck scanning and continue drive (c :)) 27% full)

Similar Questions

• Scanning and repair drive C

  While I was with my laptop, it restarted abruptly. At the start, he started C scanning and repair drive. Since then on my PC was extremely slow. Control Panel, internet browsers to hang on their opening. Sometimes, the PC restarts, showing KERNEL_DATA_INPAGE_ERROR.

  Your advice in this regard would be highly appreciated.

  Hello

  Try this registry manipulation to avoid to analyze and repair at startup, see if that helps:

  http://www.kapilarya.com/weird-scanning-repairing-of-drives

  Hope this helps, good luck :)

• After Windows Update on 13/10/11 all reboots Windows is extremely slow and hard drive is on continuously.

  I ran the Windows, distributed update to my PC 10/13/11.  After restarting the computer is so slow as to be unusable.  I am able to get the Windows Task Manager to run, and it sees a minimum CPU (0-10%).  The hard drive light is on continuously.  The computer seems to be tied up access the hard disk.  The machine restarts do not help.  When you try to use Windows Explorer to view what is on the hard drive of each operation takes several minutes to complete.  I tried to launch the system restore to restore to before the update, but it shows a blank white screen.  Often trying to do something with the Windows Explorer I see in the title bar of Windows Explorer (not responding).

  How can I get the machine into a usable state?

  It's a shame that we know absolutely nothing about your system, but it's because the forums MS Answers does not prompt for any information system when a new question is asked.

  You can probably fix your calendar to restore system back to an earlier date, but that would leave you without the updates, so you should really understand what the deal is with them and fix it (eventually).

  Here's how:

  If your system restore page display only the title bar 'System Restore', or your accounts settings page of users shows that the 'User accounts' title bar and the screen where information needs to be is an empty white box...

  System Restore is a frequent target of attacks by malicious software.  If SR was working before and is now afflicted, run some scans and then fix any problems.

  Remember that the system restore is not a time machine.

  Just fix the immediate issuance of the calendar vacuum system restore:

  Looks like your file jscript.dll became somehow not registered so you can re-record it.

  There are probably a few other things that do not work you know yet, so fix them all at once.

  Re-registration of these DLLs is correct, even if they do not need renewal.  THERE

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

  regsvr32 jscript.dll
  regsvr32 vbscript .dll
  regsvr32 /i mshtml.dll (it's a look of slash)

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Now check your timetable for restoration of the system and/or the user account settings page.

  After you get through the other 'methods', then someone can help your mounting system, but it will be easier and go faster without wild goose chase if you provide additional information, first:

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Now make some clarifications:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when system summary information is displayed, click on edit, select all (Ctrl-A), copy) Ctrl + C) then paste (Ctrl-V) the information here.

• Drive hard c stuck scanning and repair 100% complete

  My laptop was to start due to a hard drive problem. During the restart, the laptop was apparently scanning and repair itself, but it got stuck at 100%. So I have to stop. This has happened several times, and finally I decided to update the laptop. It was fine for a few months, and then it happens again. Should what is the problem with the computer and what can do/what I do?

  Thanks in advance :)

  Hello

  No doubt the HARD drive is defective and must be replaced.
  You should know that a HARD disk is part no reusable who was going to die sooner or later.

  In my case, the HARD drive died twice within 5 years of the use of the laptop.
  Now, I m using a SSD drive. I would recommend you replace it with a good SSD drive as this would considerably improve the performance of your laptop.

• Cannot start Acer aspire V3 - 571G "scan and repair drive (E): 27%.

  Hello! I have an Acer aspire V3 - 571G. But I have a problem now, when I boot, the screen with the Acer logo appears, with the message: "Analysis and repair Drive (E): 27% Complete" and it never moves from 27 percent. So I unplugged the computer sometimes and sometimes a message asking me to restore to an earlier version. Once I tried to restore, a screen with the Acer logo appears. Before I restarted the computer and had this problem, I downloaded a scanning software from disk on the Ookla Speedtest site, but since he cannot solve all the problems, I downloaded another similar software by AVG Netherlands BV and fixed all the problems. Then they said that I needed to fix something in the Device Manager (3 of my miniports were not work) so I looked on the net for a solution, that I followed and uninstalled all 3 miniports. After the AVG scan, it asked me to restart, which I did later and could not get more in Windows. Any help would be appreciated. Thank you.

  I finally solved this problem! After starting, press F9, and then click "restore." Then you will need to be patient and start the computer normally will be! Here it helps other people with this problem too.

• Firefox crashes constantly. Did the verification of memory, virus scan and update driver Windows 7

  Last 5 reports of incidents

  bp-200c5e27-a8f2-4f75-82a9-17bde2131120
  bp-3d58105d-716b-4860-8a4e-3cead2131120
  bp-ed41e8a3-f001-49d8-a7b6-21c752131120
  bp-b806af65-72f9-46be-b2af-564942131120
  bp-5328dcb7-dce6-4c7e-8839-a30a72131120

  The question was bad RAM. Discovered using memtest.

• Windows 8: Active window gets inactive automatically and continues to the flashing [sudden switching between active and inactive window continuously States]

  Hello

  I use DELL NewXPS Ultrabook with Windows 8. When a window is open and kept inactive for about 1 or 2 minutes, it is automatically inactive and the continuous window status from an active - inactive shows automatically. When this happens, the window is idle most of the time and the active State continues to appear at irregular intervals, repeated for a few milliseconds. This appears in the form of a 'flash' in the title bar. It's really annoying, especially when I read a document, this flashing action breaks the concentration and is really a burden for the eye.
  I reinstalled the entire system through a complete restoration and tried to update all the drivers, but the problem persists.
  Everyone knows the same problem? What are the causes and what are the steps to follow to get rid of this? Can anyone help?

  Hello

  As you reinstalled the operating system, I suggest you to contact Dell technical support for assistance.

  http://en.community.Dell.com/support-forums/laptop/f/default.aspx

  Feel free to get back to us for any information related to Windows.

• Scanning and repair (f :)) 100% compleat - frozen screen)

  A few days at a cold start I get the message ' analysis and repair drive (f :)) 100% full) ' the circle of treatment still works, but I never have to connect, just stuck! I don't have a power of strength off the coast, then restart. This last time I had to use F8 at the beginning, but the repair was not successful. I could help to fix this Windows 8 Pro.

  On the reference to the command chkdsk 100% stuck, what can I do? the process runs for 12 hours continuously. must cancel or there are problems

• How can I use Windows Defender to scan an individual file in Windows 7?

  How can I use Windows Defender to scan an individual file in Windows 7?

  To the best of my knowledge, it is not possible.

  A cheap substitute, albeit rather inconvenient, is to use a personalized analysis on the folder containing the file of interest.  Go to Windows Defender-> custom scan and then select the folder in the pop up dialog box.

• Windows 7 USB Flash drive - if I click on Scan and difficulty after you insert the disk, it erases my files

  Original title: Windows 7 USB/Flash drive problems

  In Windows 7, if I plug in my USB drive, the message box appears titled ' do you want to scan and difficulty of removable disk (e :))?»  If I click on Scan and Fix, he deletes my files (or so I thought).  I hope that the files are still there and I have simply can't see because the drive is FAT32 and not NTFS (it says that most of the drive is NOT of free space, so I assume that the files are still there).  What should I do to see / access files?

  Note: A reader, I never selected "Scan and repair"... so I can still see/access files.
  On the other drive, however, the first time I plugged it on Windows 7, I clicked Scan and Fix and it erased all the files on this drive (I guess).  This of course got me very angry.

  Hi MichaelGramm,

  It seems that the file format has been corrupted. You might consider formatting the drive in NTFS file system and check if this solves the problem. For Windows 7, the best choice for hard disks is NTFS.

  Note: Make sure that you back up the data before formatting the disk.

  See these articles for more information on formatting disks and flash player:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

   

  Formatting disks and drives: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

   

  Caution:

  Formatting erases all existing files on a flash drive. If you format a flash disk that has files on it, the files will be deleted.

  Hope this information helps.

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Scan and repair disk stuck on 27%

  Yes I've seen questions on this subject, but it's a little different.

  I have a laptop HP Envy m6 on Windows 8. He told me before the update to 8.1, I install the updates of Windows 8 remaining. Tried to install, but I get 8000ffff error code. I went in cmd and do the chkdsk command and restarted my laptop. It gets stuck on 27% when it is scanning and repair. Skip the process works, but it just ends up being a black screen instead of take me to the login screen. I tried the Safe Mode with network and still the same problem. All the patches?

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems with your computer of Windows 8 is it stuck at 27% when scanning and the repair process.

  This could occur due to system conflicts.

  I suggest you refer to the suggestions provided by Rajesh Govind replied on 21 March 2013 and check if this is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-performance/PC-stuck-on-boot-scanning-an-repairing-drive-c-28/57677c00-AF01-48b3-A121-c921512d25c1

  I hope this helps. Please let us know the results. We will be happy to help you further.

• Question about scanning and repair of drive (C :)?

  Everyone says that 'analysis and repair disk (c :))' on Windows 8 portable computers means it has not been closed correctly. I have a laptop Asus X501A which of course has Windows 8. When I stopped it, I always stopped him properly, as you're supposed to do. However, earlier this morning, when I logged on what he was doing "scan and repair the disk (c :)). I didn't know what it meant at the time, so I looked on my phone what it meant, and he said it means that always happens due to a bad stop. I thought to myself "How does this affect me? I always turn off my laptop properly. "So I looked for other causes of it, and only it was major changes to a laptop. Since I got this laptop, I did not really have major changes, so I thought it was strange. When you "scan and repair the disk (c :)) ', he got stuck on 35% completed for a long time, until he went to 100% full and restarted my laptop.

  Why my laptop have analyze and repair my drive (C :)?

  Hello

  Please see after correction upward to solve this problem:

  http://www.kapilarya.com/weird-scanning-repairing-of-drives

  Hope this helps, good luck :)

• When I try to compose an email, simply consist of window icon stuck in the taskbar windows cannot really expand and use it

  OK, the details of installation below, so when I try to compose an email, I just get a new message window icon stuck in windows
  taskbar cannot really expand and use it. If I reboot in safe mode with all the addons disabled, then it works fine. But
  If I restart normally and manually disable addons/plugins, then close and restart normally IE mode unsecured, it
  breaks, so doesn't seem to be an addon or plugin, but rather something with the configuration.

  Application Basics
  

  Name Thunderbird
  Version 31.6.0
  User Agent Mozilla/5.0 (Windows NT 6.1; rv:31.0) Gecko/20100101 Thunderbird/31.6.0
  Profile folder
  See file
  (Local disk)
  Application version identifier 20150330093429
  Permit Plugins about: plugins
  Build configuration about: buildconfig
  Memory usage on: memory
  Mail and News accounts
  Outgoing server ID incoming servers
  Connection security name authentication security name connection default authentication method?
  Account2 (no) plain passwordCleartext of local records
  account3 (nntp) news.mozilla.org:119 passwordCleartext plain stbeehive.oracle.com:465 SSL passwordCleartext set to true
  account5 (imap) stbeehive.oracle.com:993 SSL stbeehive.oracle.com:465 SSL passwordCleartext true passwordCleartext
  Incident reports
  ID of the report
  BP-0a8986d2-ff0c-41C3-9da6-e770e2141224 24/12/2014
  BP-01f44ba7-3143-4452-AC98-981b62140123 23/01/2014
  Extensions
  Name enabled Version ID
  British English Dictionary 1.19.1 false [email protected]
  3.3.3 lightning {e2fda1a4-762b-4020-b5ad-a41df1933103} false
  Oracle Beehive Extensions for Thunderbird (OracleInternal) 1.0.0.5 false [email protected]
  Important change preferences
  Value name
  accessibility.typeaheadfind.flashBar 0
  Browser.cache.Disk.Capacity 358400
  Browser.cache.Disk.smart_size_cached_value 358400
  Fake Browser.cache.Disk.smart_size.first_run
  Fake Browser.cache.Disk.smart_size.use_old_max
  extensions.lastAppVersion 31.6.0
  fake font.internaluseonly.Changed
  make. Name.monospace.El Consolas
  font.name.monospace.tr Consolas
  make. Name.monospace.x - baltic Consolas
  make. Name.monospace.x - Central-euro Consolas
  make. Name.monospace.x - cyrillic Consolas
  make. Name.monospace.x - unicode Consolas
  make. Name.monospace.x - West Consolas
  make. Name.sans - serif.el Calibri
  font.name.sans - serif.tr Calibri
  make. Name.sans - serif.x - Baltic Calibri
  make. Name.sans - serif.x - Central-euro Calibri
  make. Name.sans - serif.x - cyrillic Calibri
  make. Name.sans - serif.x - unicode Calibri
  make. Name.sans - serif.x - western Calibri
  make. Name.Serif.El Cambria
  font.name.serif.tr Cambria
  make. Name.Serif.x - baltic Cambria
  make. Name.Serif.x - Central-euro Cambria
  make. Name.Serif.x - cyrillic Cambria
  make. Name.Serif.x - unicode Cambria
  make. Name.Serif.x - West Cambria
  make. Size.Fixed.El 14
  font.size.fixed.tr 14
  14 are. Size.Fixed.x - Baltic
  make. Size.Fixed.x - Central-euro 14
  14 are. Size.Fixed.x - cyrillic
  make. Size.Fixed.x - unicode 14
  14 are. Size.Fixed.x - West
  make. Size.variable.El 17
  font.size.variable.tr 17
  17 do. Size.variable.x - Baltic
  make. Size.variable.x - Central-euro 17
  17 do. Size.variable.x - cyrillic
  make. Size.variable.x - unicode 17
  17 do. Size.variable.x - West
  gfx.blacklist.Suggested - driver-version 257.21
  mail.openMessageBehavior.version 1
  true mail.winsearch.firstRunDone
  mailnews. Database.global.datastore.ID 8 d 997817 CEE1-4f16-aa36-008d5baeb30
  Mailnews. Fake Database.global.indexer.Enabled
  true network.cookie.prefsMigrated
  Network.TCP.sendbuffer 65536
  places.database.lastMaintenance 1429004341
  places. History.expiration.transient_current_max_pages 78789
  plugin.disable_full_page_plugin_for_types application/pdf
  true plugin.importedState
  plugin. State.Flash 0
  plugin. State.Java 0
  plugin. State.np32dsw 0
  plugin. State.npatgpc 0
  plugin. State.npctrl 0
  plugin. State.npdeployjava 0
  plugin. State.npfoxitreaderplugin 0
  plugin. State.npgeplugin 0
  plugin. State.npgoogleupdate 0
  plugin. State.npitunes 0
  plugin. State.npoff 0
  plugin. State.npqtplugin 0
  plugin. State.nprlsecurepluginlayer 0
  plugin. State.npunity3d 0
  plugin. State.npwatweb 0
  plugin. State.npwlpg 0
  true plugins.update.notifyUser
  Graphics
  Adapter Description NVIDIA Quadro FX 580
  Vendor ID 0x10de
  Device ID 0 x 0659
  RAM 512 MB card
  Adapter drivers nvd3dum nvwgf2um, nvwgf2um
  8.15.11.9038 driver version
  14/07/2009 driver date
  Active Direct2D blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  Fake license DirectWrite (6.2.9200.16571)
  Gamma settings ClearType: 2200 Pixel Structure: R
  WebGL Renderer blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  GPU accelerated Windows 0. Blocked for your version of the graphics driver. Try to update your driver graphics version 257.21 or newer.
  Skiing AzureCanvasBackend
  AzureSkiaAccelerated 0
  AzureFallbackCanvasBackend Cairo
  AzureContentBackend Cairo
  JavaScript
  Incremental GC 1
  Accessibility
  0 Active
  Prevent accessibility 0
  Versions of the library
  Minimum version expected Version in use
  NSPR 4.10.6 4.10.6
  NSS 3.16.2.3 ECC base 3.16.2.3 base ECC
  Util NSS 3.16.2.3 3.16.2.3
  NSS SSL 3.16.2.3 ECC base 3.16.2.3 base ECC
  S/MIME 3.16.2.3 NSS ECC base 3.16.2.3 base ECC

  Noticed in the information provided:
  Graphics adapt Description NVIDIA Quadro FX 580
  Vendor ID 0x10de
  Device ID 0 x 0659
  RAM 512 MB card
  Adapter drivers nvd3dum nvwgf2um, nvwgf2um
  8.15.11.9038 driver version
  14/07/2009 driver date
  Active Direct2D blocked for your version of the graphics driver.
  Try to update your driver graphics version 257.21 or newer.

  You can update your graphics driver and retest.

• OfficeJet 6110 all-in-one: officejet 6110 all-in-one, window 10, scan and save to PDF

  I always love this printer and do not want to give up yet.  I was able to scan and save to PDF in the window 8 but after upgrade, I am unable to find a driver upgrade to be able to scan and save to the PDF format.  I can only managed to save. TIF, PNG or JPEG.  I need to scan and save to PDF to send an acknowledgement of health to the health care provider.  Any help would be greatly appreciated.

  Yours

  Hello

  Try the HP scanning and Capture app below:

  https://www.Microsoft.com/en-NZ/store/p/HP-scan-and-capture/9wzdncrfhwl0

  So, try the Windows Scan application:

  https://www.Microsoft.com/en-us/store/p/Windows-scan/9wzdncrfj3pv

  Kind regards

  Shlomi