Windows and SBS 2008 PowerEdge 840

Similar Questions

• Desperate cry for help - Win7 and SBS 2008 sharing network/disconnections

  Hi all

  I am facing a problem of bad guy who frustrated me for several weeks now!

  Scenario:
  1 Windows Server 2008 SBS Premium Edition (not R2)
  Network share: \\Server\DBShare
  also mapped as J:\ on client computers
  Share contains some databases Access 2002 ("access xp") back-end (BE)

  2. customers: all diversified machines: XP, Vista, Win7, etc...
  ALL have Access XP (2002) installed (runtime) and run a horrible old 13 year front-end (FE) which has been spasmodic developing since 1997. It is mission critical and there is no budget to rewrite is because it is sprawling and has its hooks in each device, procedure, policy and activity that we do.
  Front-end is run locally, lies in the path of users % appdata %.

  Problem:

  Currently 8 x peripheral non-Windows 7 system to access every day, stay connected 24 hours a day and never give disk errors or network.

  ANY windows 7 machine is guaranteed to give disk or network error messages at some point - from 30 minutes to 15 hours by opening the front end and be left idle.

  NOTE: I was sent here on the forum to access because they thought that Win7 forum would be more appropriate. For non-access users, Access is like the Canary in the coal mine
  with regard to the problems of network connection. Even a slight network disturbance causes to complain about errors on the network and to require the connection to database
  to be re-created, data loss and potentially damage this database to the file system.

  I had all the world put in place using j:\variousdatabases.mdb, but read it as one
  Nono so I scripted a change in all the drives mapped to UNC paths in the
  connection of these tables property.  With this change, sometimes I just
  get an "odd" error disk or network, then am able to reconnect - but this
  bothers me terribly because 1. It can do damage to the db, 2. He
  means that I must write to this trap for more than 300 forms and even the management of errors
  so I think that there will be some things that I can't trap and 3. It is also SOMETIMES
  do not reconnect and I get messages repeated... or even an appcrash.

  When I say EVERYTHING, I mean I have 4 test devices: a work station, a Mini PC, a
  laptop and a netbook. This started as a 'test upgrade' to Win7 on the
  post work - but after this Show-stopping number, it became a desperate
  Troubleshooting jamboree, involving more than systems and other tests, because the
  solution seemed just around the corner.

  Now, a week later, I'm ready to give in on computeres forever and go live
  under a bridge, since I am unable to solve this problem and have already invested so much
  a lot of time into it!

  Here's what I think, that I decided to go out and why:

  Not a problem of network infrastructure.
  I can unlug a minipc with vista on it (same exact material) and connect it to the
  the ethernet port on a win7 test evil machines and it plugs.
  Fortunately for more than 24 hours. All the machines are on the same switch 24 ports. All the
  nonwin7 machines work as if in a dream, even when moved to the port/cable
  used by the machines of win7.

  Not a problem of a server NETWORK card.
  See above. Other devices not win7 Purring immediately without disconnecting.

  Not a server problem.
  SBS2008 works * Virgin * for the last 7 months. Only the reason for
  glance has been recently to try to resolve this problem of fools...
  All clients not win7 are happy as can be, always.

  The EM is not (apparently horrible?) dynamic TCP stack scaling or unloading on the
  SERVER.
  EVERYTHING in the driver for the card that could be discharged (and has been by default,
  no problem on other non-win7 clients) has been decommissioned. I also have
  off the chimney and any other devices of automatic setting on the server.
  (FYI - all STILL happy nonwin7 clients, server shows no significant increase)
  in the CPU usage)

  The EM is not (apparently horrible?) dynamic TCP stack scaling or unloading on the
  CLIENTS.
  Doing the same thing again on clients - auto tuning off the coast, where the unloading off
  possible. Latest installed NETWORK card drivers that give many options of unloading
  to turn off.

  No offline files
  These have been disabled on the server, on the client and in the group shares
  policy just to make a point.

  Not the MiniPc / the workstation laptop / Netbook / la
  Seems unlikely that all 4 would not work because of the material error AND
  drivers of offensive, but I ran out of ideas - so I photographed the MiniPC win7
  and put Vista on. To my great regret, the Vista OS on the same device works
  perfectly. Recreate the image of the OS Win7 and BOOM - same problem.

  No IPv6
  Disabled on the clients and the server

  No IPX/SPX
  Not installed on the server

  No network traffic
  (happens when I'm all but 5 computers off tension and nobody in the)
  Office as well in the middle of the day when users are 'use'.)

  Not the time of day
  Sometimes after 15 minutes in the middle of the afternoon or after 6 hours to
  04:32 - does not coincide with the events of on the server or the client error log, does not
  coincide with DHCP renewals (which are in 2 weeks)

  No server autodisconnect
  The value - 1 both server and client (I know that's irrelevant on the client))
  I also tried to add a ffffff keepconn regentry (I know that the stated max is
  64 k, but it doesn't help me have the connection after 18 hours.)
  FYI - no effect with or without the keepconn registry entries.

  Not be able to save
  4 machines, 4 different ranges of stuff randomly to stop turning out - of
  NICs for windows power plans to simply disable acpi. Problem
  continues

  Not my version of Windows 7
  Tried our company VLK Win7 and my personal copy of win7 ultimate
  and the NetBook win7 Home premium. SAME SAME SAME

  Not my drivers up to date
  MS stock on old machines drivers that are not built for Win7 show me the
  same error
  Laptop and Netbook (the latter preinstalled by the vendor) also give the same problem

  It is not that I do not use the drive\UNC.
  I ran a separate script that does just a DIR() on file every 10 seconds
  and yet, I finally get disk errors.

  It is not that I am not query the database and the connection is time
  There is a database search all 2 minues in PA to check new data in a table

  This isn't a field/roaming profile issue
  I tried logged as a domain with the profile user roaming user admin not now
  the area, officially added to the domain and even laptops PCs
  not registered on the domain.

  It's not the system restore
  Disabled on clients

  Is not SMB signing
  This is disabled in server group policy and still the same problem...

  Help, please!

  Any ideas would be much appreciated!

  Thank you in advance to help improve my new year! & Happy holidays to those of you luck is not to be this troubleshooting!

  Alex

  Thanks diana,.

  I tried my luck in the Technet Server forum you suggested.

  For others who want to follow my progress, here is the link:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/thread/0527a084-1953-47f0-ae83-febb52af14fc

  Happy new year!

• Vista Ultimate on a SBS 2008 domain, Linksys DMA2200 - managed to do work and why

  I could get my Linksys DMA2200 to connect to a Vista Ultimate computer joined to a domain on the first try!

  Well, let's be realistic. On my 200th test or almost, but the first test after I came across an idea.

  Let me turn away from strategies area, firewalls and all the rest.  It really has nothing to do with him apparently, except to the extent where you may not have done something stupid to put in place certain exclusions.

  I have not really decided if I'll put it immediately in the public domain or if so, when.

  Just to tell you that the support Linksys said, it couldn't be done, but it can.

  Check out my blog for updates on the publication of this information, or on my website.

  Well, I had a bit of a missed out on the first DMA2200 and just got a replacement.  I have everything working fine now (with the exception that after 2-3 minutes, the box freezes if it is connected to the Media Center, just play a DVD or waiting on parameters).

  Here's how to work with a computer joined to the domain, at least one running VIsta Ultimate Edition and SBS 2008, but I think it will work in general.

  1. On the field, create a user as follows:
     1. User name is Mcx1.  Note that this is the same as the local user created on the computer of MC.
     2. The password does not appear to matter.
     3. Make the members of the following groups:
        1. Directors
        2. Domain users
        3. Remote Desktop users
  2. On the Vista Ultimate computer, make sure that this domain account is configured for the computer and displays these groups.
  3. Disable user account control.  If it is enabled, the Extender to connect but then unplug immediately. An error event 107 will be published in newspapers of Media Center files.  It is the dialogue of the authorization request which causes this error and disconnects from the Extender.

  That's all.  At some point during my reading/struggle to make it work, I got the Mcx1 local account as a member of administrators and users to the remote desktop, but when I did the re-install, it is no longer the case and it works fine.

  For info, I have an ATI-wonder tuner attached to the VIsta box with a cable card, and the image on the HD and encrypted channels is great with just the connections component and 1080i.  Works exactly as you think it should.

  Now if I can only operate for longer than 2-3 minutes without having to restart...

  Hope Linksys pays attention when they said it was impossible.

  Best, Larry

  If anyone has any ideas on the gel in question, let me know.

• Windows SBS 2008 - user is unable to RDP in even through that it's in the appropriate groups

  Hi guys,.

  Problem: A user has been accidentally deleted from a Windows SBS 2008 server running Active Directory and we have been unable to grant him the rights of RDP - the error message indicates that the account must be granted "logon through Terminal Services right.

  The installer: A single Windows SBS 2008 server running hyper-VM with a unique virtual machine on it which manages the TS licenses

  Tried to bugs/more information:

  Things that we tried to do to solve the problem (all done via Active Directory users and computers)

  • He added to the administrators and remote desktop users groups
  • He added to the users group to the remote desktop on the virtual machine (the account can now connect to the virtual machine at least)
  • Cloned an existing account on the primary server
  • Removed and added the account through the SBS console and added to the admin and RDP groups (on the dedicated server and virtual machine)

  None of them seems to have solved the problem. There are currently 2 free licenses of TS, so I don't think it's a licensing issue.

  It's almost as if there is a top group policy setting or similar which replaces the user groups is added to, but I don't know where to look for here.

  I've already made sure that the user do not have TS access turned off in the settings of the user's

  Any suggestions?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• SBS 2008 compatibility with OS windows XP/7

  If the server at my workplace computer is running windows SBS 2008, and we have 2 clients running Windows XP Professional, I can configure three new customers with Windows 7. I'm not sure that the it guy who has implemented the network upward originally stated that any installation of computers in the network must run XP and could not be equipped with Windows 7. This system was the installation in July last year, and I am not interested in the purchase of new operating systems for existing customers of 2 and am not able to source XP for 3 additional guests I want to Setup. There will be compatibility problems with the configuration of computers with different OS, and they are all still will have the same functionality with respect to the initial configuration (IE still using the http://connect) and remote access

  Your problem would be probably better suited to the Microsoft Technet forums, located at the:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  They are better directed at Windows Server and other professional level products, repost your problem it would give you better results.

• How to install and configure sbs 2008 on a routable network

  I am trying to install a SBS 2008 with a routable IP address, but whenever I try to run the internet access Wizard it fails when it checks for my router. This system request not routable IP address to complete the installation. I would like to configure the SBS with a domain name registered for AD and use a routable for my server and router IP address

  Thank you, Tony

  Hello, Tony

  For support with Windows Server, please create a new post on the TechNet forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

• HP 15 t: cannot connect laptop Windows 8 to SBS 2008

  I just got my new HP 15 t and tried to connect it to the network so that the antivirus software, etc can download.

  It's our first Windows 8 machine; our network is different from XP and Windows 7. The server is SBS 2008.

  When I run the launcher (after http://connect), I get the following message if poster as soon as I clicked on connect:

  "This computer does not meet the conditions required to connect to the network.

  Before continuing, you must address the following issues:

  Configuration of operating system supported not found

  To attach your computer to the Windows Small Business Server network using the program of the computer to connect, you must run the operating system Windows XP with SP2 or later, or the Windows Vista operating system. Not all editions of Windows Vista and Windows XP are supported in the Windows SBS netowkr. Windows Vista Business, Windows Vista Enterprise, Windows Vista Ultimate, Windows XP Professional, Windows XP Professional x 64 and Windows XP Tablet Edition are supported on the Windows SBS network. »

  But I have connected to Windows 7 computers to the network. And I was told that Windows 8 should be able to connect. So is this something wrong with the configuration of the client computer, or do I need to tweak SBS 2008 so that it can help in this regard?

  EnduringMike wrote:

  Well, I've marked this as resolved, but it turns out that it is not.

  Once I've upgraded to pro, I run the connect program and now I get the message that it failed because the PC does not meet the system's maximum operating requirements to run client Setup.

  It gives a link to check for more information that goes to a page that does not exist at Microsoft.

  How many people they have working there at Microsoft? They reach even the link between their software and their Web site correct?

  So. I now have Pro 8.1. And still no connect to SBS 2008. Then guess?

  You can follow these instructions to join the PC to your domain: http://www.tomsitpro.com/articles/how-to-join-windows-8.1-to-domain, 2 - 735.html

• LegeCy medical application requires administrator rights to run on Windows XP but application resides on the SBS 2008 Server

  Hi all

  Application is a medical Client / Server using SQL in the database model. and resides on the SBS 2008 with XP Server and client computers.

  Rather that to load the client on windows XP, it would not sense to simply run the application console using the Terminal Server services and configure the application to start an hour of connection on. Given that the application requires administrator rights to run, how can I assign admin right only on demand, so when they connect, they can use the application with the given admin rights but do not have access to the rest of the server or control?

  Been awhile and a very little bit of rust, but I know it should be easy... losing sleep reading my series of the voume of support docs... :)

  Hello

  The question you have posted is related to servers and will be well suited in the TechNet community. Click on the link below.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install SBS 2008 and Documentation systems management tools

  Hello

  I use the GDPS 5.4 rev A00 drive try to install SBS 2008 on a PowerEdge 2950III server. The process works very well and I chose the server 08 x 64 as the operating system. Once it asks me the disk he thought for a second and shows the following error message;

  Script: C:\remindpopup2.vbs
  Online: 123
  Char: 4
  Error: A device attached to the system does not work.

  Code: 8007001F
  Source: WshShell.Exec

  [OK]

  I found an updated version of the rev A00 5.5 GDPS, but I can only download the last two iso files.

  Is there anyone help any with this problem before I try to call Dell?

  Just remove all mapping for SAN, fixed yesterday 09/12/2012 and remove raid in case if you don't have a SAN, we M610 blade servers

• PowerEdge 840: USB keyboard and mouse not working not.

  Hello everyone.

  Yesterday, I pursached a used Dell Poweredge 840 to function as a backup server, I'm having a few problems with it but I can't understand.

  I installed the server with Windows Server 2003 x 86 edition and downloaded the drivers on the Dell site. It works perfectly, except for one problem:

  USB keyboards and mouse refuse to work.

  PS/2 works fine however, but any USB keyboard or mouse will not work.

  Flash USB drives read very well, therefore I used to recover some files on the machine before, but it was connected to the network, USB keyboard and mouse do not work.

  They are not recognized at startup and do not allow to enter the setup of the BIOS after Windows has started, that they are not always recognized. Windows displays the device as unknown device.

  I tried to boot from a live CD of 14.04 Lubuntu, in which the USB keyboard and mouse do not work either. Only PS/2 wants to work.

  I have tried different types of USB mouse:

  • Microsoft mouse
  • Acer OEM mouse
  • Mouse laser Logitech M-U0007

  None of them could work, although they work fine on my laptop, the main file server which is a model of HP and Dell Optiplex desktop computer.

  I tried a few different USB keyboards as well, but they refuse to work.

  I ended up borrowing a pair of keyboard and mouse PS/2 to configure the server, but I want it to work with my USB keyboard and mouse.

  Just for the record: the USB flash drives do not work very well, it's just the keyboard and mouse is not working.

  Anyone know how I can get there?

  Thanks in advance,

  Dominique

  Hello.

  Unplug all devices connected to the USB and PS/2 ports. Unplug the AC power cable, wait about 1 minute and then press in and hold the button for about 15 seconds. Reconnect the power and power on the server. Connect the keyboard and mouse to the USB ports and try again.

• Can I load windows vista or 7 on this PowerEdge 840?

  Hey guys, first time, coming through a device like this. PowerEdge 840

  Serial number: Service tag removed by privacy policy > | Express service code: abducted by the Express service code privacy policy >

  I read the manual, but still confused, can I load win7 on this machine? It can work as any ordinary windows machine?

  So I went into the boot options and selected the dvd as the first player, but it just goes straight to windows server 2003. Something up with this device in any case, whenever I have manually close it restarts and the fan is very noisy? Is this way, it is supposed to work, or it is supposed to be silent?

  There is 3x73GB readers in this machine and there is 2 pci cards connected to a smal circuit located at the rear of the 3 HARD drive, what can I do here in order to bypass this RAID system to connect a HARD drive to load windows OS please?

  The connector on the disks look like regular SATA connectors but the description on the Maxtor disk reads:

  ATLAS 10K V, 3.5 SERIES

  73 GB Serial Attached SCSI

  They are not SATA disks? If not and I can use a SATA drive, do I have to remove 3 disks and place a SATA drive in one of the slots?

  herbertsherpa

  I read the manual, but still confused, can I load win7 on this machine? It can work as any ordinary windows machine?

  You might be able to install Windows 7, but NO server has been tested and validated to run no matter WHAT client operating system. They are tested and developed for the server operating system. That said, it doesn't mean it won't work, but you will need to use the drivers 2008R2.

  herbertsherpa

  So I went into the boot options and selected the dvd as the first player, but it just goes straight to windows server 2003. Something up with this device in any case, whenever I have manually close it restarts and the fan is very noisy? Is this way, it is supposed to work, or it is supposed to be silent?

  Servers are not supposed to be quiet, but as part of the POST, the fans turn loudly when first energized. If they do not ramp down to a 'normal' speed, there may be a problem with the fans, sensors or environment (or the lid can be turned off).

  Make sure there is a check mark next to the DVD drive... means it is enabled. Also, how did you create your Windows media?

  herbertsherpa

  There is 3x73GB readers in this machine and there is 2 pci cards connected to a smal circuit located at the rear of the 3 HARD drive, what can I do here in order to bypass this RAID system to connect a HARD drive to load windows OS please?

  You can install Windows with a RAID System... you just need drivers. What model of controller RAID do you have?

  herbertsherpa

  The connector on the disks look like regular SATA connectors but the description on the Maxtor disk reads:

  ATLAS 10K V, 3.5 SERIES

  73 GB Serial Attached SCSI

  They are not SATA disks? If not and I can use a SATA drive, do I have to remove 3 disks and place a SATA drive in one of the slots?

  SAS (Serial Attached SCSI) are not the SATA drives, but SAS controllers/cables/funds of basket are 'retro' - compatible with SATA. You CAN put SATA drives out there, but it won't change anything. Windows will treat it the same. Windows only communicates with the controller, not directly with the player.

• Pass Cisco 871 and VPN to the SBS 2008 Server

  to precede the questions below, I'm responsible for COMPUTING internal with several years of site / offsite support. I also have very limited knowledge of the inner workings of a Cisco device. That said, I've beaten my head against a wall, trying to configure my router Cisco 871 to allow access to our internal server of SBS 2008 VPN hosting services. I think I, and properly configured the SBS 2008 Server.

  I use advanced IP services, version 12.4 (4) T7

  Here is the \windows\system32\conifg\system running

  Building configuration...

  Current configuration: 9414 bytes
  !
  version 12.4
  no service button
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime localtime show-timezone msec
  Log service timestamps datetime localtime show-timezone msec
  encryption password service
  sequence numbers service
  !
  hostname yourname
  !
  boot-start-marker
  boot-end-marker
  !
  Security of authentication failure rate 3 log
  Passwords security min-length 6
  logging buffered debugging 51200
  recording console critical
  enable secret 5 *.

  !
  No aaa new-model
  !
  resources policy
  !
  PCTime-5 timezone clock
  PCTime of summer time clock day April 6, 2003 02:00 October 26, 2003 02:00
  IP subnet zero
  no ip source route
  IP cef
  !
  !
  !
  !
  synwait-time of tcp IP 10
  no ip bootp Server
  "yourdomain.com" of the IP domain name
  name of the IP-server 65.24.0.168
  name of the IP-server 65.24.0.196
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  inspect the IP name DEFAULT100 appfw DEFAULT100
  inspect the IP name DEFAULT100 cuseeme
  inspect the IP name DEFAULT100 ftp
  inspect the IP h323 DEFAULT100 name
  inspect the IP icmp DEFAULT100 name
  inspect the IP name DEFAULT100 netshow
  inspect the IP rcmd DEFAULT100 name
  inspect the IP name DEFAULT100 realaudio
  inspect the name DEFAULT100 rtsp IP
  inspect the IP name DEFAULT100 sqlnet
  inspect the name DEFAULT100 streamworks IP
  inspect the name DEFAULT100 tftp IP
  inspect the IP udp DEFAULT100 name
  inspect the name DEFAULT100 vdolive IP
  inspect the name DEFAULT100 http urlfilter IP
  inspect the IP router-traffic tcp name DEFAULT100
  inspect the IP name DEFAULT100 https
  inspect the IP dns DEFAULT100 name
  urlfilter IP interface-source FastEthernet4
  property intellectual urlfilter allow mode on
  urlfilter exclusive-area IP Deny. Facebook.com
  refuse the urlfilter exclusive-domain IP. spicetv.com
  refuse the urlfilter exclusive-domain IP. AddictingGames.com
  urlfilter exclusive-area IP Deny. Disney.com
  urlfilter exclusive-area IP Deny. Fest
  refuse the urlfilter exclusive-domain IP. freeonlinegames.com
  refuse the urlfilter exclusive-domain IP. hallpass.com
  urlfilter exclusive-area IP Deny. CollegeHumor.com
  refuse the urlfilter exclusive-domain IP. benmaller.com
  refuse the urlfilter exclusive-domain IP. gamegecko.com
  refuse the urlfilter exclusive-domain IP. ArmorGames.com
  urlfilter exclusive-area IP Deny. MySpace.com
  refuse the urlfilter exclusive-domain IP. Webkinz.com
  refuse the urlfilter exclusive-domain IP. playnow3dgames.com
  refuse the urlfilter exclusive-domain IP. ringtonemecca.com
  refuse the urlfilter exclusive-domain IP. smashingames.com
  urlfilter exclusive-area IP Deny. Playboy.com
  refuse the urlfilter exclusive-domain IP. pokemoncrater.com
  refuse the urlfilter exclusive-domain IP. freshnewgames.com
  refuse the urlfilter exclusive-domain IP. Toontown.com
  urlfilter exclusive-area IP Deny .online-Funny - Games.com
  urlfilter exclusive-area IP Deny. ClubPenguin.com
  refuse the urlfilter exclusive-domain IP. hollywoodtuna.com
  refuse the urlfilter exclusive-domain IP. andkon.com
  urlfilter exclusive-area IP Deny. rivals.com
  refuse the urlfilter exclusive-domain IP. moregamers.com
  !
  policy-name appfw DEFAULT100
  http request
  port-bad use p2p action reset alarm
  port-abuse im action reset alarm
  Yahoo im application
  default action reset service
  service-chat action reset
  Server deny name scs.msg.yahoo.com
  Server deny name scsa.msg.yahoo.com
  Server deny name scsb.msg.yahoo.com
  Server deny name scsc.msg.yahoo.com
  Server deny name scsd.msg.yahoo.com
  Server deny name messenger.yahoo.com
  Server deny name cs16.msg.dcn.yahoo.com
  Server deny name cs19.msg.dcn.yahoo.com
  Server deny name cs42.msg.dcn.yahoo.com
  Server deny name cs53.msg.dcn.yahoo.com
  Server deny name cs54.msg.dcn.yahoo.com
  Server deny name ads1.vip.scd.yahoo.com
  Server deny name radio1.launch.vip.dal.yahoo.com
  Server deny name in1.msg.vip.re2.yahoo.com
  Server deny name data1.my.vip.sc5.yahoo.com
  Server deny name address1.pim.vip.mud.yahoo.com
  Server deny name edit.messenger.yahoo.com
  Server deny name http.pager.yahoo.com
  Server deny name privacy.yahoo.com
  Server deny name csa.yahoo.com
  Server deny name csb.yahoo.com
  Server deny name csc.yahoo.com
  audit stop trail
  aol im application
  default action reset service
  service-chat action reset
  Server deny name login.oscar.aol.com
  Server deny name toc.oscar.aol.com
  Server deny name oam - d09a.blue.aol.com
  audit stop trail
  !
  !
  Crypto pki trustpoint TP-self-signed-1955428496
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1955428496
  revocation checking no
  rsakeypair TP-self-signed-1955428496
  !
  !
  TP-self-signed-1955428496 crypto pki certificate chain
  certificate self-signed 01
  308201B 8 A0030201 02020101 3082024F 300 D 0609 2A 864886 F70D0101 04050030
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
  69666963 31393535 34323834 6174652D 3936301E 170 3032 30333031 30303035
  33315A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 39353534 65642D
  32383439 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
  8100CB6B E980F044 5FFD1DAE CBD35DE8 E3BE2592 DF0B2882 2F522195 4583FA03
  40F4DAC6 CEAD479F A92607D4 1 B 033714 51C3A84D EA837959 F5FC6508 4D71F8E6
  5B124BB3 31F0499F B0E871DB AF354991 7D45F180 5D8EE435 77C8455D 2E46DE46
  67791F49 44407497 DD911CB7 593E121A 0892DF33 3234CF19 B2AE0FFD 36A640DC
  2 010001 HAS 3 990203 AND 77307530 1 130101 FF040530 030101FF 30220603 0F060355 D
  1104 1B 301982 17796F75 726E616D 652E796F 7572646F 6D61696E 2E636F6D 551D
  301F0603 C 551 2304 18301680 145566 4581F9CD 7 5F1A49FB 49AC9EC4 678908FF
  2A301D06 04160414 5566 745 81F9CD5F 1A49FB49 AC9EC467 8908FF2A 03551D0E
  300 D 0609 2A 864886 818100B 3 04050003 903F5FF8 A2199E9E EA8CDA5D F70D0101
  60B2E125 AA3E511A C312CC4F 0130563F 28D3C813 99022966 664D52FA AB1AA0EE
  9A5C4823 6B19EAB1 7ACDA55F 6CEC4F83 5292 HAS 867 BFC65DAD A2391400 DA12860B
  5A 523033 E6128892 B9BE68E9 73BF159A 28D47EA7 76E19CC9 59576CF0 AF3DDFD1
  3CCF96FF EB5EB4C9 08366F8F FEC944CA 248AC7
  quit smoking
  secret of username admin privilege 15 5 *.

  !
  !
  Policy-map sdmappfwp2p_DEFAULT100
  !
  !
  !
  !
  !
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface FastEthernet4
  Description $$$ FW_OUTSIDE$ $ES_WAN$ ETH - WAN
  address IP dhcp client id FastEthernet4
  IP access-group 101 in
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  NAT outside IP
  inspect the DEFAULT100 over IP
  IP virtual-reassembly
  route IP cache flow
  automatic duplex
  automatic speed
  sdmappfwp2p_DEFAULT100 of service-policy input
  out of service-policy sdmappfwp2p_DEFAULT100
  !
  interface Vlan1
  Description $ETH - SW - LAUNCH$ $INTF - INFO - HWIC-$4ESW $ES_LAN$ $FW_INSIDE$
  the IP 192.168.0.1 255.255.255.0
  IP access-group 100 to
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  IP nat inside
  IP virtual-reassembly
  route IP cache flow
  IP tcp adjust-mss 1452
  !
  IP classless
  !
  !
  IP http server
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  the IP nat inside source 1 list the interface FastEthernet4 overload
  IP nat inside source static tcp 192.168.0.100 1723 1723 interface FastEthernet4
  IP nat inside source static tcp 192.168.0.100 25 25 FastEthernet4 interface
  IP nat inside source static tcp interface 192.168.0.100 80 80 FastEthernet4
  IP nat inside source static tcp 192.168.0.100 interface FastEthernet4 443 443
  IP nat inside source static tcp 192.168.0.100 interface FastEthernet4 987 987
  !
  recording of debug trap
  Note access-list 1 INSIDE_IF = Vlan1
  Remark SDM_ACL category of access list 1 = 2
  access-list 1 permit 192.168.0.0 0.0.0.255
  access-list 100 remark self-generated by the configuration of the firewall Cisco SDM Express
  Access-list 100 = 1 SDM_ACL category note
  access-list 100 deny ip 255.255.255.255 host everything
  access-list 100 deny ip 127.0.0.0 0.255.255.255 everything
  access ip-list 100 permit a whole
  access list 101 remark self-generated by the configuration of the firewall Cisco SDM Express
  Note access-list 101 = 1 SDM_ACL category
  access-list 101 permit tcp any any eq 1723
  access-list 101 permit tcp any any eq 987
  access-list 101 permit tcp any any eq 443
  access-list 101 permit tcp any any eq www
  access-list 101 permit tcp any any eq smtp
  access-list 101 permit udp host 65.24.0.169 eq field all
  access-list 101 permit udp host 65.24.0.168 eq field all
  access-list 101 permit udp host 24.29.1.219 eq field all
  access-list 101 permit udp host 24.29.1.218 eq field all
  access-list 101 permit udp any eq bootps any eq bootpc
  access-list 101 deny ip 192.168.0.0 0.0.0.255 any
  access-list 101 permit icmp any any echo response
  access-list 101 permit icmp any one time exceed
  access-list 101 permit everything all unreachable icmp
  access-list 101 deny ip 10.0.0.0 0.255.255.255 everything
  access-list 101 deny ip 172.16.0.0 0.15.255.255 all
  access-list 101 deny ip 192.168.0.0 0.0.255.255 everything
  access-list 101 deny ip 127.0.0.0 0.255.255.255 everything
  access-list 101 deny ip 255.255.255.255 host everything
  access-list 101 deny ip any one
  not run cdp
  !
  !
  control plan
  !
  connection of the banner ^ CCCCCAuthorized access only!
  Unplug IMMEDIATELY if you are not an authorized user. ^ C
  !
  Line con 0
  local connection
  no activation of the modem
  telnet output transport
  line to 0
  local connection
  telnet output transport
  line vty 0 4
  privilege level 15
  local connection
  transport input telnet ssh
  !
  max-task-time 5000 Planner
  Scheduler allocate 4000 1000
  Scheduler interval 500
  end

  All that top has been configured with the SDM interface. I hope someone here can take a look at this and see what my question is, and why I can't connect through the router.

  All thanks in advance to help me with this.

  Jason

  Based on your description, I am assuming that you are trying the traffic PPTP passthrough via the router 871, and the PPTP Protocol ends on your SBS 2008 Server.

  If this is the correct assumption, PPTP uses 2 protocols: TCP/1723 and GRE. Your configuration only allow TCP/1723, but not the GRE protocol.

  On 101 ACL, you must add "allow accord any any" before the declarations of refusal:

  101 extended IP access list

  1 allow any one

  I guess that the PPTP control connection works fine? Are you able to telnet to the router outside the ip address of the interface on port 1723?

• PowerEdge 1900 and Poweredge 840 and NO hardware RAID SATA HD, FreeNAS with ZFS

  I searched these forums and the web in general a concise my questions answer, but nothing is done.  I just happen to find someone who is using 'old' technology and it retarget as much as you might think (I am a broke student by the way).

  I bought a Poweredge 1900 Server & server Poweredge 840 ebay about last year.  I've been busy and have yet to work with these two units.  I wanted to use the PE 1900 as a file server and then push a backup of these files on the server off site, the PE840.  I intended to buy four 1 TB or four disks SATA 2 to (WD Black or RED WD) for each system, respectively.

  I've been through a few videos on youtube the other day and discovered FreeNAS.  This seems to be a much better solution than the use of Ubuntu Server, but it also made me think about the hardware Raid with these systems.  If FreeNAS uses ZFS (software raid controller), you want to avoid a hardware raid controller.

  My current assumptions, please correct me if I'm wrong on any of the following:

  I think that each of these systems to support drives up to 2 TB?, I think that I can use the SATA drives and not SAS, four discs in each system drives.

  I believe that I can boot from USB flash drive (a quick, which I intend to install FreeNAS on which they recommend)

  I think I can connect readers to the Perc/Raid Controller controller (& just turn 'off' RAID), or simply directly on the motherboard.  (What woud be the advantages/disadvantages of the use of the card or simply by using the Council)

  I intend on working with what I have right now (cheap and available), then once I get this configuration work that I take it out of the sand/lab sandbox, upgrade the processors and ram up my budget will allow and go live with the installation program (if it is still possible)

  From now on, they are sitting in a corner, begging to consume energy, and fans of polute the soundscape with their cries (PE1900 precisely).  I know that I could pursue other options but I already these two units.

  I really want to utilze FreeNAS its serving capacity file and ZFS for its reliability.  Is it possible with this camera?, or should I junk them and move on?

  Thank you for your answer!

  I've done some research more and since FreeNAS is built off of FreeBSD supported hardware is the same.  I couldn't find a list for FreeNAS specifically so I looked to FreeBSD.  I was still confused about the material and decided to go forward with the poweredge 840, for two reaasons, there already 8 GB of ram and it is not as heavy to move on (from 1900). I shoot the raid controller (for simplicity) and I plugged in three 250 GB SATA drives and a 40 GB SSD.  I had to set the bios for the usb key is recognized and also due to adapt to be considered as a hard drive, then had to define the sequence of boot to the usb drive, acting as a hard drive.  Once all that has been said and done, I wrote my FreeNAS image on my USB and booted up.

  It took maybe 10 minutes and I was up and running (once I had configured the hardware and bios), I created a RaidZ (as proposed FreeNAS) and with my three 250 GB drives, it produced 453 GB of usable disk space.  The 40 GB SSD is used as L2ARC (from my cache of understanding), I tried the installer with and without the 40 GB SSD.  The difference was impressive, just opening the photos or streaming video on my laptop Win 8.1 (Dell 17r) is almost flawless, as if the files were stored locally.

  I was impressed by how quick and easy to use FreeNAS, simple and fast network shares can be configured with permissions that works quite simply not in less than 5 minutes.  I don't have Windows Server down, but generally configuration active directory takes a little more effort.

  I am satisfied for the moment and continues to experiment with the Poweredge 840 until I commit to a processor upgrade.  Once I acquire 16 GB memory for my Poweredge 1900 I will perform with her, as it has only 1 GB now, crazy.

  Thank you for your help.

• WIndows 7 and Server 2008 machines won't remember preferences of network discovery, needs to set every time you start up or wake up.

  Hello

  I was wondering if anyone here could be kind enough to help me solve this situation

  I have two machines Windows 7 and Server 2008 machines remember preferences of network discovery.

  I use the software on the windows server that collects data and information to two windows 7 machines and discover the network is necessary for this purpose

  These machines are set up in an autonomous local network set up as a working group the only other points on the network are none based on PC hardware that fortunately, the server communicates with and reads the data of

  Once network discovery is defined for the network, the system works as expected, but on each startup (or wake up) network discovery is lost and need to be authorized. This is the case at the time windows server 20008 r2 and windows 7

  How can I make these permanent preferences. for that it restarts and re establish communication its self without intervention

  am I missing a setting or if not is there a way I can script the selection preference on each start (/wake) upwards.

  the end user must be able to turn on the system / restart and use it with needing to have any IT / networking of knowledge to the outside to get the system running.

  Thank you for taking the time to read my request

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Terminal Services in windows sbs 2008

  How re-insall Terminal Services in Windows SBS 2008? We weren't able to connect these days. Thank you.

  http://www.Microsoft.com/SBS/en/us/forums-blogs.aspx

  They will help you in the communities of SBS above.

  See you soon.

  Mick Murphy - Microsoft partner