Windows asks me if a file is already shbx in a folder (same name)
Hello, if you could help me about the subject to know what modifier, thanks in advance
Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
Good day
Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)
Thank you
http://support.Microsoft.com/common/international.aspx
Tags: Windows
Similar Questions
-
Creation of the debugging token error: file has already been signed
I nuked my PC and could not save my symbolic debugging Moose registration and got a new. I am registered with flash builder 4.6 but failed to create a new debugging token. Whenever I try (FB or from the command line) it gives me the error that the file has already been signed, regardless of what name I try to save it as. Someone has an idea what could be the cause?
I was able to get the problem solved. Was I was using an older version of the SDK commands and again by specifying the location of the key store and let the necessary detection automatic settings worked.
-
HIO,
I am trying to download the application Adobe Acrobat XI pro - but whenever I go through the download process, it comes up with an error that says we can't download because the file "adobe" already exists in the folder. I have not downloaded Pro XI. Any thoughts?
Update... PEEM... If she had already loaded and he did not even know...
-
Why windows asking to validate when I already did when I installed it don't make sense I have to change my power suply and when I go to turn it on it tells me it not good no more makes no sense I not I could youse it 1 time and I did on this computer is the one that I used the activation code on buttocks now doesn't say its no good stupid glitch now I can not put in day helpe me pleas befor I'll man nuts
Hello Joe45
Try this link and let me know if it helps. Thank you.
-
Cannot run the Windows backup utility, error: "a file already exists (0X800700B7)."
I have a Lenovo Think Pad with Windows Vista. When I try to back up the computer, I choose backup and the location of tools accessory system configuration. Then I run a backup to start and identify a DVD RW as the location of the backup files. I click to start and a screen pops up saying
A file exists already (0X800700B7), and at this time it cannot be saved.
OX800700B7 is not a file name. It is an error code.
What follows is a response to the same problem. The person who had the problem was using 64-bit. But that makes no difference in this case. Follow th step by step posted by ABC_george and see if that fixes the problem.
-
I left my computer for my magic jack so I can receive calls. When I woke in the morning, there were two open windows. One was the new network
window and the other was the window asking if I wanted to do a home network or public. Does that mean someone hacked my computer?
The fact that my network connection now has a (2) beside it means I have now two netowrk connections runinning.
The system seems much slower and takes about 10 seconds to respond to the movements of the mouse if it has been sitting for awhile.
Help, please
Computer illiterate fool
2 hooks would duplicate and feel safe to remove.
If this is not the case, of course, run a spyware scan online TrendMicro Housecalls.
http://housecall.trendmicro.com/
I would contact Magic Jack support with this issue
-
I have a question about Windows recognizes only not USB devices formatted in FAT32.
The biggest symptom is Windows asking to format any device that has FAT32 (indicates RAW file format in disk management. The format will fail unless NTFS is used (which is unacceptable for the SD cards used in cameras, etc.).
I have a Toshiba Satellite P755 with USB 3 port and three USB 2 ports, running under Windows 7 64-bit. Type computer apparently and for most device type is not relevant to this subject after doing some extensive research.
1. I tried SFC / SCANNOW with no result
2. I uninstalled all the USB drivers and drivers of devices on SD card with no result
3. I created a new profile and flies over my files with no result
4. I searched the net and found a plethora of people having the same problem on several versions of Windows but not confirmed of the solution.
5. I tried the fix for troubleshooting of hardware from Microsoft with no result.
The devices I've used are pen drives, to several types of SD cards flash drives and external hard drives. These devices are confirmed to work on several other computers configurations in different windows. When formatted in NTFS all works but like I already said, SD cards will not work in the cameras etc. to NTFS.
I think that the computer of wiping and again is not the problem. After researching, I discovered this problem has been around for many years and followed by Windows XP throughout Windows 8 forums and blogs that I read. I'm surprised Microsoft doesn't have a fix for this yet.
Hello and sorry for the delay.
I tried this before with the same results. My pen drives and large SD card worked until the problem occurred. Windows 7 has lost the ability to recognize the FAT32 devices.
I think I found the problem, however. My USB key must have failed in some way. After checking all my media work properly on a free desktop running windows 7 64, I jumped into a thumb sansa player and that's when I started having errors on this computer as well. This time, no data survived.
I went back to my laptop and formatted by a new copy of windows Professional 64-bit. The laptop works great and recognizes all FAT32 media I throw at it. I do not use the USB key suspect for fear that it might cause problems again.
And so far so good a few weeks later. Everything works great. I used FAT32 media without any problem. I'm sure it was the reader. I guess that he worked at masked the fact that it was the cause of the problems. Strange that this would produce windows FAT32 to reject.
-
Cannot save edited image. Error message: "the file is already in use or left open.
I tried to save JPEG images after making a few changes to Photoshop CS4. For each file, I get the message "cannot save (file name) because the file is already in use or left open." I checked my apps and nothing is running would be to use the image. Can someone look over my EtreCheck and tell me if there is something current funny? I'm working on hundreds of images, so just change the name is slow and heavy work around. The problem seems to have started after update 10.11.
Thank you!
Description of the problem:
Photoshop will not save modified files
EtreCheck version: 2.1.8 (121)
Report generated on May 30, 2016 to 19:09:40 PDT
Download EtreCheck from http://etresoft.com/etrecheck
Click on the links [click for support] to help with non-Apple products.
Click on the links [click for more details] for more information on this line.
iMac (27 inch, mid 2011) (data sheet)
iMac - model: iMac12, 2
1 3.4 GHz Intel Core i7 CPU: 4 strands
12 GB of RAM expandable
BANK 0/DIMM0
OK 2 GB DDR3 1333 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1333 MHz
0/DIMM1 BANK
OK 4 GB DDR3 1333 MHz
BANK 1/DIMM1
OK 4 GB DDR3 1333 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac, 1920 x 1080
OS X 10.11.5 (15F34) - time since started: 3 days 10:0:4
Hitachi HDS722020ALA330 disk0: (2 TB)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 2,00 (1.46 free) tuberculosis
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
OPTIARC DVD RW AD - 5680H
Logitech USB receiver
Computer, Inc. Apple IR receiver.
Card reader Apple
Apple Inc. FaceTime HD camera (built-in)
Seiko Instruments Inc. SII Smart Label Printer 450
EPSON EPSON scanner
Nikon LS-5000 ED
Seagate FreeAgent 1 TB FW
EFI (disk1s1) < not mounted >: 210 MB
back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)
EFI (disk1s1) < not mounted >: 210 MB
back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)
Western Digital my book 1140 3 TB
disk2s1 (disk2s1) < not mounted >: 210 MB
Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
disk2s1 (disk2s1) < not mounted >: 210 MB
Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)
disk2s1 (disk2s1) < not mounted >: 210 MB
Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)
Apple Inc. Thunderbolt_bus.
Any where
/ Applications/Toast 8 Titanium/Toast Titanium.app
[no charge] com.roxio.BluRaySupport (1.1.3) [click for support]
[no charge] com.roxio.TDIXController (1.6) [click for support]
/ Library/Application Support/Avast/components/fileshield/not signed
[loading] com.avast.AvastFileShield (3.0.0 - 10.10 SDK) [click for support]
/ Library/Application Support/Avast/components/proxy/not signed
[loading] com.avast.PacketForwarder (2.1 - 10.10 SDK) [click for support]
/ Library/Extensions
[no charge] com.LogMeIn.hamachi (1.0) [click for support]
/ System/Library/Extensions
[loading] com.logmein.driver.LogMeInSoundDriver (1.0.3 - 10.5 SDK) [click for support]
[no charge] com.seagate.driver.PowSecDriverCore (5.1.1) [click to support]
com.siibusinessproducts.driver.SLP [no charge] (1.1) [click for support]
/ System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns
[no charge] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [click to support]
[no charge] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [click to support]
[no charge] com.seagate.driver.SeagateDriveIcons (5.1.1) [click to support]
Demons of launch system problem: ℹ️
[failure] com.apple.logd.plist [click for more information]
[loading] org.postfix.newaliases.plist [click to support]
[no charge] com.adobe.CS4ServiceManager.plist [click to support]
[no charge] com.avast.secureline.update - agent.plist [click to support]
[no charge] com.avast.secureline.userinit.plist [click to support]
[no charge] com.avast.update - agent.plist [click to support]
[no charge] com.avast.userinit.plist [click to support]
[operation] com.carbonite.launchd.status.plist [click to support]
[loading] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist [click to support]
[failure] com.adobe.fpsaud.plist [click to support]
[loading] com.avast.init.plist [click to support]
[loading] com.avast.secureline.init.plist [click to support]
[loading] com.avast.secureline.uninstall.plist [click to support]
[loading] com.avast.secureline.update.plist [click to support]
[loading] com.avast.uninstall.plist [click to support]
[loading] com.avast.update.plist [click to support]
[operation] com.carbonite.launchd.daemon.plist [click to support]
[operation] com.carbonite.launchd.monitor.plist [click to support]
[loading] com.carbonite.launchd.watcher.plist [click to support]
Mail request hidden (/ Applications/Mail.app)
iTunesHelper UNKNOWN (missing value)
Dropbox application (/ Applications/Dropbox.app)
Adobe Photoshop CS4 Application (/ Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app)
Screenhero hidden UNKNOWN (missing value)
Request for InstUtilLaunch (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)
Application LOGINserver (/ Library/Printers/Brother/Utilities/Server/LOGINserver.app)
AOUMonitor Application (/ Applications/ScanSnap online Update.localized/AutoOnlineUpdater.app/Contents/MacOS/AOUMonitor.app)
LogitechHarmony: Version: 2.0 - SDK 10.7 [click for support]
Web of Google Earth plugin: Version: 6.0 [click for support]
Default browser: Version: 601 - SDK 10.11
Flip4Mac WMV Plugin: Version: 2.4.4.2 [click for support]
CoolirisWebKitPlugin: Version: Unknown [click for support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]
AdobePDFViewerNPAPI: Version: 15.010.20060 - SDK 10.8 [click for support]
FlashPlayer - 10.6: Version: 21.0.0.242 - 10.6 SDK [click for support]
Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 21.0.0.242 - 10.6 SDK [click for support]
iPhotoPhotocast: Version: 6.0
AdobePDFViewer: Version: 15.010.20060 - SDK 10.8 [click for support]
JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK
Facebook cleaner
Latest news
1 - ClickWeather
Facebook Photo Zoom
Unplug
Ghostery
Dashlane
Amazon search discount
PriceBlink
WOT
AdBlock
3rd party preference panes: ℹ️
Flash Player [click for support]
Flip4Mac WMV [click for support]
TechTool Protection [click for support]
Skip system files: No.
Mobile backups: OFF
Automatic backup: YES
Volumes to back up:
Macintosh HD: Disc size: 2.00 TB disk used: 536,90 GB
Destinations:
Feedback Up [Local]
Total size: 999,86 GB
Total number of backups: 50
An older backup: 2016-04-06 19:21:02 + 0000
Last backup: 2016-05-31 01:28:34 + 0000
Backup disk size: too small
Backup size GB 999,86 < (disc 536,90 GB X 3)
By CPU process back to the top: ℹ️
100% CarboniteDaemon
3% WindowServer
Console 3%
hidd 1%
1% adobe Photoshop CS4
Top of the process of memory: ℹ️
Com.apple.WebKit.WebContent 696 MB
541 MB softwareupdated
Safari 503 MB
CarboniteDaemon 399 MB
348 MB mds_stores
Virtual memory information: ℹ️
1.59 GB of free RAM
3.24 GB of RAM active
6.54 GB RAM idle
1.51 GB RAM cable
GB Page-ins 212,57
Breaks in Page 443 MB
Please read this message before doing anything.
This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.
The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.
Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.
Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.
Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.
The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.
Test in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.
-
I installed the latest version of Firefox on my laptop (Windows 7 Professional 64-bit). The thing is that firefox prompt to save passwords of websites. I'll explain you a little more away with an example: suppose I load www.gmail.com. When I login, the password manager key is displayed on the left side of the address bar, but the corresponding window which would ask if I want to save the password or not, does not appear. I tried all the possible solutions. It is true that when I restart firefox with disabled modules (safe mode), password manager works fine. But I don't really use Add-ons that could prevent firefox to save passwords. I disabled all add-ons and ran firefox in normal mode, but the password manager does not work yet. Please keep in mind that I tried everything and that any post not published so far describes a similar problem to mine case. Consider that I have the same I have configured the entire system from the beginning. The problem appeared again from the first time I launched firefox. At that time, I had not installed any antivirus software and there is no add-on with firefox. Hope someone can give me a valid solution...
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
It is possible that there is a problem with key3db and signons.sqlite files that store the encrypted names and passwords in Firefox.
Rename signons3.txt and signons.sqlite files in the Firefox profile folder.
You can add .old files (key3.db.old and signons.sqlite.old) names or move them to another folder to make it possible to cancel the action.
You must define a new master password after renaming or removing the signons3.txt and all the currently saved passwords are lost.
If that worked, then you can delete the renamed files that are no longer needed.See:
- "Troubleshooting" in http://kb.mozillazine.org/Password_Manager
-
Outlook express asks me to compact files,.
Outlook express asks me to compact files, even if I left him he keeps asking more and more every 10-20 min no matter how many times I left it compact and files it ask me to do it again
Other programs can cause this. If you have Windows Desktop Search installed, go to control panel | Indexing options (I think that's where he is) and disable indexing courses OE. If this doesn't fix it, then its another program.Steve"Lilly51" wrote in message News: 314c8be4-520b-4e4a-aeb1-b7a5f8398ac9...Outlook express asks me to compact files, even if I left him he keeps asking more and more every 10-20 min no matter how many times I left it compact and files it ask me to do it again
-
Windows asks for a password when you try to access to the "view work group computers."
We are on a network. Main computer, that we can access through the receptionist connect you and access shared files on this computer. Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers." We tried to use its password. However, the shared files are still not accessible.
Hello
1. what happens when you enter the password?
2. how many computers are connected to this working group?
Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP
http://support.Microsoft.com/kb/318030
I hope this helps!
-
After I update to Windows XP SP 3 my media center has completely stopped working and it gives me following e: validation failure of strong name for the assembly 'c:\windows\home\ehshell.exe '. the file may have been tampered with or it was partially signed but not fully signed with the private key.
What I would do. I was grinding a lot and nothing has worked so far.
Stone
Please answer questions following diagnosis in a numbered list type in your very next answer (no need to quote this post):
1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?
2 a Norton or McAfee application ALREADY installed on the computer?
3. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).
4. why has not been installed SP3 years?
-
Is there a way to convert Windows Live e-mail and files folders in Outlook Express format?
I made the mistake (severe) a few years previously to install Windows Live Mail and Outlook Express abandonment on my Windows XP computer. Now, I would run parallel iMAC and Windows messaging systems and e-mail iMAC tool does not recognize Windows Live Mail as mbox files. Therefore, I can't import Windows Live Mail in the iMAC email tool. To add insult to injury, Microsoft Outlook email tool on the iMAC is import the Windows Live mail. (No use asking, I guess, why Microsoft would enact incompatible messaging formats without integrating converters through the indexing schemes). In short, is it possible to return to Outlook Express?
Hello
I suggest you according to the question in this forum and check if that helps:http://windowslivehelp.com/solutions.aspx?ProductID=1
It will be useful.
-
c:\windows\system32\d11872t14.dll missing file
Original title: c:\windows\system32\d11872t14.dll
I got a message saying that this file is missing: c:\windows\system32\d11872t14.dll. . How can I get that back?
It confuses me again why the MS Answers forum does not prompt for any information system when a new question is asked because we don't know anything on your system.
You see only this message when you start your system and then good, things work or come to the top when you do certain things and if so, what do you do when you see?
I did a Google search on this DLL and did not get any results (except your message), which makes the suspicious file.
If you see the message when you restart your system and then things work very well after that (for example, after clicking OK), I think I do it in this direction:
It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.Here are the detailed instructions that protect you and solve your problem in the 'right' way.There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.Here is a link to a popular registry backup tool:You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:Run Autoruns.exe and wait that he at the end of the filling of the list of entries.When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.Scroll through the list and look for a boot entry associated files in the error message.If you can't find on the connection tab, look in any tab.You can also click file, search to search for logon, or any tab for all or part of the name of the element.Right-click on the offending entry and choose Remove. If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.Given that your system has or has had an infection, follow up with this:Perform scans for malware, and then fix any problems:Download, install, update and do a full scan with these free malware detection programs:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.Restart your computer and solve the outstanding issues. -
Problem with Windows XP SP3 - inviting me to activate, already activated.
Hello world
I recently updated a former Dell PC running a Pentium 4 processor to a new AMD Llano APU. Each component has been replaced except the HARD drive. It is running a version of OEM XP Media edition, SP3.The first problem is that I kept getting the BSOD because of driver Intel PPM. I disabled in safe mode, and the PC has started to connect. Now I got there, Windows asks to be activated. It has been activated for the years. I tried to do it again by phone anyway, and the automatic answer is that I maybe was the victim of software piracy.Is it possible to reverse this? I really need to go back - there are essential things to disk.Thanks in advance,JoeMicrosoft made more than likely you are using a version of XP OEM and you have changed the motherboard.
OEM of Windows versions are not negotiable for new motherboards once they have been installed in the former.
You must purchase a new copy of Windows.
Buy a new hard drive and install a new version of Windows, then plug the old drive as a slave to get the information you need. Or, put the old motherboard in and back up your files.
Maybe you are looking for
-
Unable to save the existing tabs when closing Firefox 4.0
In Firefox 3.6, I was able to save all tabs before closing Firefox. This choice is missing in Firefox 4.0 so I lose all the tabs, whenever I close this new browser. Help, please! Thank you.
-
How can I record the sessions of navigation and reopen it in Firefox 4?
I don't have tools and options with all this that cutesy c * like FF used to have. FF4 has two bars of different option under Firefox Orange drop-down list menu, and another drop options to the bottom of the menu box options. So how the hell do I rec
-
Satellite A100-338: how to move it or turn off bluetooth
Hello I have an A100-338 on a platform of vista Home premium 32-bit that supports bluetooth. It has a bluetooth stack, but how do I turn it on or disable bluetooth? I went to the toshiba download page and it suggests I have remove the battery and ins
-
I have a mac pro I will be able to use my hearing aid resign through it as my phone i 6 more
will be my mac pro sport resound hearing aids
-
Hi, I upgraded my lenovo p780 kitkat 4.4.2 phone and I am kind of face some slowness in the phone. I want to downgrade back to the original jelly bean (4.2.1) sent by Lenovo with the best customizations. Please let me know how to proceed. Note: lenov