Windows automatic update does not install.

Similar Questions

• Automatic update does not install 'ViewSonic - Bus USB and Ports, display controllers - ViewSonic VP2365WB.

  Windows update - AutoUpdate does not install 'ViewSonic - Bus USB and Ports, display controllers - ViewSonic VP2365WB. Any ideas? Thank you.

  Original title: Bus USB and Ports, display - ViewSonic VP2365WB controllers

  Windows update - AutoUpdate does not install 'ViewSonic - Bus USB and Ports, display controllers - ViewSonic VP2365WB. Any ideas? Thank you.

  Hide and unless the material was manufactured by Microsoft or the hardware manufacturer tells you that you should get the driver FROM Microsoft - do not install Microsoft device for material non-Microsoft drivers.

• Automatic update does not install the update of security for Windows XP (KB2419632)

  KB2419632 will not install on my computer.  I tried to install it several times without success.  I get a 'General failure to install' error without characteristics.

  I downloaded the update (WindowsXP-KB2419632 - x 86 - ENU.exe) and tried to install it manually, but it fails when he tries to save the file "" MSADO15. "." DLL"in the folder"C:\Program Files\Common Files\System\ADO".

  The dialog box that opens is "Copy error" and said "Setup cannot copy the file msado15.dll.  Ensure that the location specified below is correct, or change it and insert 'Windows XP Sytem Files' in the drive you specify. »

  The file MSADO15. DLL exists in the directory above.

  In reviewing other positions, he requested information on the following security software:
  1 security Suite: McAfee Total Protection 2010 (current subscription)
  2. what McAfee, Norton never
  3. preliminary: do not remember, have always used McAfee.

  NOTE: I've never had a problem with an update of Windows until one.

  How should I proceed?

  See the section "How to get help" of http://support.microsoft.com/kb/2419632

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Automatic update does not work. Unable to load Windows 7 or SP2. Error "cannot find the file specified."

  original title: automatic update does not work. Unable to load Windows 7 or SP2.

  XP Pro, automatic updates do not work.  Unable to load Windows 7 or SP2.  Error on SP @ is "cannot find the specified file.  Tried to load files noted missing for Windows 7, but was not able to load either.  All the other conditions to download files.

  Hello

   

  
  1. have you downloaded the stand-alone package for the service Pack 2 or are you using Windows update?

  2. you also try to install Windows 7?

  
  Method 1.
  Run Disk Cleanup and disable the security software and then try to install the same and check.
  See the article below for disk cleanup:
  http://support.Microsoft.com/kb/310312

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2.
  If the problem still exists together own starting the computer and attempt to install the service pack.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.

   

  Also, it is recommended to install the Windows XP service pack 3. Reference:

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• last 10 automatic updates has not installed on my system; windows xp x 86 service

  last 10 automatic updates has not installed on my system; windows xp x 86 service

  jump,
  We could use a little more information.  What updates fail and the error codes are, to start.
  However you can check these links because they have some general troubleshooting steps that may help you.

  Reset the Windows Update components

  Solve Windows Update installation issues

  Troubleshooting Windows Update: offered on several occasions to update

  Last Windows Update Agent

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• service running windows xp sp 3, automatic updates does not show

  company uses wsus, in the previous months, that this pc has patches of security update without problem, now the automatic updates does not appear as a service,

  tried to install wsus client and he tells me it's already installed... help

  Please contact your IT Department for further assistance or system (assuming that's not you).

• error message 0 x 80240036, automatic, updates does not

  Original title: responsible for recovery CD, including Windows XP SP2 from the Lim after crash; update won't work; error message 0 x 80240036

  Before the accident, I was using SP3 with all updates.  I uninstalled all the anti-virus software.  Automatic Updates does not more.

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1: Run the Microsoft Fixit tool
  Solve the problem with Microsoft Windows Update is not working: http://support.Microsoft.com/mats/windows_update/

  Method 2:
  You can also try the steps in the link and check if it helps.
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756/

  Method 3:
  If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates: http://support.Microsoft.com/kb/822798

  Follow the article below to learn more.

  T-oriented relations on connection errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941#advmethodC

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

• Automatic update does not work anymore

  My problem is that automatic update does not work anymore and when I try to next turn to the I get some really long file name is missing. I can not down load and reinstall Security Center because it will not only because it is included in Vista. I can't load it updates as the software that is designed to do this does not work. I can't copy and paste the error message due to the fact that I am not given the choice.

  Is enyone knows how to get around this problem.
  The message I get is that Windows does not find:-': {26ee0668-a00a-44d7-9371-beb064c98683}\5\::{36eef7db-88ad-4e81-ad4...     I think that there is more than that, but it does not fit in the window.

  I am running Vista sp1

  Ian Robins, what are the errors that you receive with this procedure? What step gives you access denied? You can attempt to acquire the files listed for a known working machine, but let us try the following:

  It is a simple procedure of rearmament and included are the steps to paste the result of the command prompt, so we read what it gives you:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. At the command prompt, type the following command and press ENTER:

  net stop wuauserv

  net stop bits

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 Catroot2.old

  net start cryptsvc

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  regsvr32 c:\windows\system32\wuapi.dll

  regsvr32 c:\windows\system32\wuaueng.dll

  regsvr32 c:\windows\system32\wucltux.dll

  regsvr32 wups2.dll

  regsvr32 c:\windows\system32\wups.dll

  regsvr32 c:\windows\system32\wuwebv.dll

  net start bits

  net start wuauserv

  net start Eventlog

  1. Click the icon in the upper left of the window, click on edit, then click on select all, press the Enter key.
  2. By pressing CTRL + V on your keyboard to paste the content in your response.
  3. After a validation or record your response, close the command prompt and restart your computer, and then test Windows Update again.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB2572073 this security update does not install

  This security update does not install what is anyone else having the same problem? I install and it says: it is installed and the next time I log in it reappea4s. Very annoying!

  Hi JimWaddell,

  ·         Have you tried the steps in the article of my previous answer?

  If this isn't the case, follow the steps in the article of my previous answer and let us know the results.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• Microsoft Office Publisher KB980470 update does not install!

  KB980470 update does not install!

  Tried several times for 2 or 3 days...

  o here are the steps I took... which I think should work:

  (1) go to the Microsoft Download Center:http://www.microsoft.com/downloads/en/default.aspx
  (2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
  3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
  4) repeat for all downloads that you can not install
  (5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.

  I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted under this threadhttp://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2?prof=required&lc=1033 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.

  I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!

  I hope this helps! Good luck!

  "I tried and it works!

• Windows Update does not install SP3 on Windows XP Pro computers

  I have about 400 computers running Windows XP SP2 withIE 6.  It is set to automatic updates on installed every day at 03:00.  For some reason, SP3 is installed automatically never.  If I run the windows update manaully, it offers me to install SP3.  Is it normal?

  SP3 does not install automatically. It's like IE8.

  Perhaps this may also be of interest:

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  TaurArian [MVP] 2005-2010 - Update Services

• Windows 7 - MS Works 9 update does not install

  Update for Microsoft Works 9 will not be installed. Whenever I'll stop computer, it shows the updates install and then stop. I fixed a problem with microsoft silverlight to a tech by e-mail. Who told me to contact you for the issue with works because it was more a problem of windows 7.

  Hi Willow9210,
     
    
  1. are you able to install any other updates to Windows on your computer?
     
  Try to reset the Windows update components and check if this solves the problem.
   
  Method 1:
   
  How to reset the Windows Update components?
  http://support.Microsoft.com/default.aspx/KB/971058
   
  Method 2:
   
  If the problem persists then I suggest you perform the steps mentioned in the link provided below.
   
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358 
   
  Note: ignore the title of the article as it is applicable to the issue you are facing.
     
  Method 3:
  
  I suggest you to install the updates manually and check if the problem reappears.
      
  Download and save the Setup on your desktop package and try to install the same one by one and check what update is causing the problem.
      
  To do this, you must enter the number of the Windows Update in the search field in the link provided below.
     
  Link Download Center
  http://www.Microsoft.com/downloads/en/default.aspx 
   
  If the problem persists, you can post your query below provided forum.
    
  Reference:
    
  http://social.answers.Microsoft.com/forums/en-us/addworks/threads
     
  See also: http://www.Microsoft.com/products/works/support.mspx

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• KB2249857 Windows Update does not install with error code 800706BE

  Hello

  On October 28, Windows Update has identified 3 updates to be installed (KB2388210, Ko 2284742 & 2249857 KB) which caused my PC hang on reboot (stuck to the ' install updates...) 1 screen 3).

  Since then, I managed to install 2 of the 3 (KN2388210 & KB2284742) successfully by individually selecting in Windows Update but the KB2249857 update will not install and now whenever the PC stops it hangs while trying to install this update and needs a "hard reset" (that is, hold the power button) to recover up to.

  I've seen a few posts on problems with this update, but no definitive answer or resolutions.  Any ideas?

  Thank you!

  MARWOOD,

  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  What version of windows (32-bit or 64-bit) and service pack level.

  What application or antivirus security suite is installed and your current subscription?

  What third-party firewall

  What anti-malware software can be installed.

  0x800706be RPC_S_CALL_FAILED http://support.microsoft.com/kb/950718/>

  Run the update http://support.microsoft.com/kb/947821system tool >

• Windows Update does not install the updates from 14/04/2009. Error code 80070002.

  I'm running 32-bit Windows Vista Home Premium on a Dell Dimension E520 PC desktop with processor Pentium dual core and 3 GB of RAM.
  Reasonably up-to-date hardware. Well protected and all software security entirely to so far.
  My problem that goes from Windows Update is not install updates from 14/04/2009 and returns the error Code 80070002.
  I followed the advice and went in the Windows Software Distribution folder and remove all the contents of the data store and records downloads and tried again about thirty times now.
  I get regarding the acceptance of the license agreement and clicking on, ok, when Vista dims the screen and asks if I started it and then the error message in Windows Update, saying: "some updates were not installed."
  Is not a computer expert, I guess that what is described in help Windows Update error Code 80070002 is the same as 0 x 80070002 for which I found advice on a Microsoft page to save these commands
  net stop wuauserv
  CD %systemroot%\SoftwareDistribution
  Ren Download.old download
  net start wuauserv
  as a windows batch file and run as administrator.
  I now have a download folder and Download.old folder. Fascinating but no help at all!
  I infer that the numbers of 0x0 are my six error codes failed attempts to install Vista Service Pack 1, a few months ago who always ended up with an unusable computer suspended with a black screen and the white writing showing 46 thousand of 96 thousand file and something, followed by a number of 0x0.
  The only way I could get of these attempts was by booting from the Installation of Vista disk, masking the Service Pack 1 update and using the system restore, but that's another story.
  Have an impact on my current problem, I wonder?
  For absolute clarity are the updates that won't install:
  Explores update for Internet Explore 7 edition (KB963027) 14/04/2009 (Just editing that.) Typed a wrong number in a first time. Sorry).
  Four updates of security for Windows Vista (KB952004) (KB956572) (KB959426) (KB960803)
  Windows Malicious Software Removal Tool - April (KB890830). (I downloaded it manually and run it from my office and we found no problem).
  Update of security for Microsoft Office System 2007 (KB960003)
  Update of security for Microsoft Office Excel 2007 (KB959997).
  I'm at a loss what to try next.
  FYI, I use Uni-bleu Power Suite 2009, McAfee Total Protection and Ad-Aware Anniversary Edition with Ad-Watch Live on.
  I tried to do everything that it with Ad-Aware died, but my hunch is that the problem is in Vista ot the updates themselves.
  I'm quite competent with guests of orders, not to mention manually editing the registry!
  However, any help would be received with gratitude and I guess that if the instructions are evidence of fool I have very carefully follow step by step.

  I have the same symptoms: from a distinct point in time updates of windows works more and every time returned the error code 80070002.
  After a few hours, I found the solution: sfc/scannow reported the wuauclt.exe file.
  And the reason was: McAfee virusscan put this file in quarantine. He is falsely W32/Generic.worm.aa in there.
  Restore this file from the GUI of McAfee completely solved this problem.