Windows can't detect second screen
Last night I took off Dell Inspiron 5000 of docking station to go mobile. When I reconnected it is no longer detects my second screen. I have power on and power off screen and laptop. I checked all the connections.
When I turned off the screen, I hear the sound of a device connection / disconnection, but through the control panel and display I detect only 1 screen.
Any ideas?
Thanks in advance
Never mind
I just powered resolved power on and off the problem of the docking station.
Thank you
Tags: Windows
Similar Questions
-
Getting the error "Windows can't detect a homegroup on this network" join the homegroup
"Windows can't detect a homegroup on this network."
My RT of surface can not join my homegroup
all the answers
Thanks for your help
I ran across a few troubleshooting tips
http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows
and discovered that pc and rt surface were of the same name
as soon as I changed it, it works.
Thank you
-
Can't join a homegroup error "Windows can't detect a homegroup on this network."
Original title: Cannot join a homegroup
I have 4 PCs in my Home Network, called "IqbalHome". Two of them are desktop computers (both are a Dell Optiplex 760 with Windows 8 Enterprise) and two of them are laptops (Dell N4050 with Windows 8 Enterprise and HP Pavilion with Windows 8 Enterprise g4). All windows are updated and activated.
Now, my Homegoup is running on Dell N4050 with Windows 8 enterprise and other computers have joined it with success, but when I try to join my new G4 HP Pavilion, it takes 4-5 minutes in the treatment and then says that "Windows can't detect a homegroup on this network. To create a new Homegroup click OK and open homegroup in Control Panel. ', and I can't even open its resources from the 'network' in my computer.
I checked the 'advanced settings sharing' of 'Network and sharing Center' in the control panel and both have the same settings and connected to the network as a private network wireless. I tried all solutions here are http://windows.microsoft.com/en-US/windows-8/homegroup-problems-in-windows, but could not get this to work.
These are the network settings for computers:
(1) connected to the Tenda W150D WiFi and ADSL modem
(2) HP Pavilion has "192.168.0.4" IP and Dell N4050 "192.168.0.50' with the same mask subnet, gateway and DNS.
(3) advanced sharing settings are the same.
(4) network discovery is running and all the services are great too.
(5) HP with 192.168.0.4 can get ping 192.168.0.50 in 2-3 ms, but when I try to go through the network, it is said, 'Path network not found' and when I diagnose the problem, he said, "the remote device or resource accepts the connection".
The confusing thing is that I can still access the Dell N4050 on other computers and use its shared resources, but the problem is only with HP Pavilion. I really don't like Windows to do this and I'm planning to switch to Linux as Windows is not a developer friendly environment, there are a lot of annoying things in it.
Any kind of help will be really appreciated.Hello
Did you make any changes before the show?
Method 1:
Temporarily disable the software antivirus (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.
Note: make sure that you enable the antivirus software, other security and firewall programs.
Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2:
I suggest you go through the links and check.
The homegroup Windows problems
http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows
Homegroup from start to finish
What it takes to set up a home network
http://Windows.Microsoft.com/en-us/Windows-8/what-you-need-Setup-home-network
Sharing of files and printers
Do get back to us and let us know the State of the question in the case where you need further help or your next post. We, at tender Microsoft to excellence.
-
I have a second window open on a second screen, and I want to keep constantly active.
Currently, if I click on something else, IE Skype on my laptop, the second screen goes idle and narrows mode full screen. How can I stop this from happening?
Hello
If you make reference to the window becomes inactive then this is normal because at some point, there may be only one window that could be highlighted and which would be not active.
However, you can publish your comments for us on the link below.
-
Hi... interesting problem. I use my laptop computer on a desk with a second screen and moving.
The last time I was using my laptop on the desk, I brought an application (Quicken) on the second screen and now when I start it up it displays on-screen extended even if I use the standalone laptop. I can't demand because it appears in the second screen and I can't get it back to the main screen. I even rebooted and it seems to 'remember' where is was the last time.
Any thoughts on how to get it back (I know I can reconnect the second screen and move it back, but what about the time when I'm not near my office and want to access an application that was last used on the extended screen.)
Argh...
Thanks for your thoughts, I assume that there is a simple key sequence to make it visible on the main screen once I can't find it anywhere.
Kind regards
Lex GitterVery late reply, I have the same problem and I solve it hovering over the window you want in the taskbar when the preview window displays a right-click on it. Select optimize. The window will appear on your screen. No, you can enter the window and its size down, it stays on the current view
-
How to push the second screen?
Hello
I am writing an application in which I'm trying to push a second display to a custom in the first menu item. The first screen is pushed successfully and the custom menu items are filled with a bluetoothserialportlistener. Once I click on a special menu item, I want to launch the second screen. I used a dialog.alert to verify that the the menuitem run() method works, but the second screen is not displayed.
Any suggestions are greatly appreciated!
The first screen is created by hand (String [] args)
MatMain app = new MatMain();
app.enterEventDispatcher ();
private MatMain() {}
pushScreen (new WelcomeScreen());
}
I tried to call the second screen as follows:
synchronized (UiApplication.getEventLock ()) {
getUiEngine () .pushScreen (new MatOnline (_info));
}
I also tried:
UiApplication.getUiApplication () .pushScreen (new MatOnline (_info));
Thanks again!
Hello
I think you're trying in a very complex way.
Your architecture using complex and ignoring the bluetooth codes related, I can see your second screen with a minor modification.
In your DeviceMenuItem class.
replaced
MatMain.getUiApplication () .pushScreen (new MatOnline (_info));
with
UiApplication.getUiApplication () .pushScreen (new MatOnline (_info));
And in your class MatOnline:
replaced
HorizontalFieldManager _fieldManagerOnline;
withHorizontalFieldManager _fieldManagerOnline = new HorizontalFieldManager();
Concerning
Bika
-
How to detect a second screen for a virtual machine (Window 7 or 8)
I would not not to ask if virtual machines (for example, Window 7 or 8) in VMware Fusion can dectet a second display and use it. I use Window 8 of a VM to extend the display to another. Although the configuration looks ok, the second screen see nothing second screen of 8 on the window of this virtual machine (virtual machine is in full screen mode)
The second screen of the Macbook works well.
Help anyone?
See you soon,.
Anthony
Have you tried:
View-> use all displays in full-screen.
-
HP Pavilion 17 Laptop: Unable to get the second screen after upgrade to Windows 10
Hello
I upgraded Windows 8.1 to Windows 10 yesterday.
Up to now the double screen/second screen was working fine after upgrade my projector not able to identify my laptop.
When I select the Windows key + P I get the message error "your PC can't project to another screen. Try to reinstall the driver or by selecting the different video card"
On my device-> graphics cards Manager, I see only Microsoft Basic graphics card.
Can someone help what driver should I install? Also ask you to provide the link for the driver to download the same.
Thank you best regards &,.
Umesh
Here are the technical details:
http://WWW8.HP.com/h20195/v2/getpdf.aspx/c04511132.PDF
It is HD4400 Intel graphics
Try the Intel driver update utility:
https://Downloadcenter.Intel.com/download/24345/Intel-driver-update-utility
Download drivers HP pages not available right now.
-
Can't detect the wireless, gateway 4025gz. mod, turn on wireless, Dosnt show the icon in the login screen. OK before wipjng drive.
If it worked before wiping the disc, then it is likely, you are missing a player specific to material not included in WIndows XP. Log on to the gateway website and download the drivers for the chipset and network. Naturally, you will need to use a wired network connection.
In general, Gateway provides the drivers specific to the hardware on a recovery of the system partition, and they also provide a tool so you can burn data on CD/DVD restore. Do you stil have this partition or did you remove it?
Every time I buy a PC, I always download copies of the material of the web site of the vendor-specific drivers and keep them on a flash drive, so that they are available when I wipe a PC and reinstall. I also do the recovery partition recovery disks.
-
How can I get windows appears on the second monitor?
Windows does not detect the second monitor. Unable to access options to the mirror of the main screen. Second montor is connected, but is only the display wallpaper.
Hello
1. How did the second monitor connected to the computer?
I suggest you try the steps from the link below and check if it helps.
Solving the multiple monitor problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-multiple-monitor-problems
Understand multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Understanding-multiple-monitors
Set up multiple monitors: http://windows.microsoft.com/en-US/windows-vista/Set-up-multiple-monitors
Hope this information is useful.
-
Windows does not detect the external monitor after Blue Screen of Death
Hi guys,.
I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.
I use an HDMI cable to connect the laptop and the screen...
Best regards
Hyouka
Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory
is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then
We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.
Also, the BIOS settings are critical, uninstall the default, add new ones.
-
CTRL-Alt-2 moves to the second screen windows - how to disable
Hello
I have a new computer to dual screen in Windows 8. When I do Ctrl + Alt + 2, my current window is moved to the screen 2 (and equivalent to 1). Does anyone know if it is a shortcut of Windows 8 or another utility? I have a nVidia graphics card and the 7200LE Panel is not shortcut (besides the stereoscopic 3D features that are disabled).
The problem is that Windows seems to treat the key ALT GR (right Alt key for the keyboard layout of the French-Canada) as a combination of Ctrl + Alt, then when I press Alt Gr + 2 to type the symbol @, my window also moves to the second screen. The equivalent problem is when I type the ± symbol (AltGr + 1 gives my character, and move the window), but this isn't as big a problem.
Anyway, if anyone knows how to disable the Ctrl + Alt + 2 sets of shortcuts, or how to make windows treat differently the keys Ctrl + Alt, AltGr do let me know.
Thank you
IMI had the same problem, and in my case it was a third-party application that came with a USB to DVI adapter.
The utility is called "MCTDUtil.exe" and is in "\Program Files".
It has a visible icon called "Super Utility". There, you have a menu called "Multi Display Control Panel". The Ctrl-Alt-1 and Ctrl-Alt-2 are mapped to do exactly this: move the window being displayed 1 and 2 respectively. You can disable the feature of this Panel.
I suspect that this utility is not necessary and can be removed.
-
Use the MacBook Air as a second screen for iMac running Windows 10
Hello
is it possible to use my MacBook Air running El Capitan as a second screen to my iMac with 10 Windows under Boot Camp? I have to use the iMac for work and wants to extend the screen of my MacBook Air. I couldn't find solutions, as target display mode does not work in Boot Camp. Does anyone know an app solution or a third party for this?
Thank you very much.
Best,
B.
Please visit http://symless.com/synergy/ .
-
Boot Camp can not detect Windows software support
Hi guys!
1. I have a question, I started my bootcamp and pressed the 2 first options and clicked on continue:
http://postimg.org/image/9mly0tvjl/
2. that's what I did to "2." step. I chose the iso file of Windows 7 Home Premium and boot camp agreed and loading all fine!
http://postimg.org/image/tg97p5fu5/
3 and now it was time for step 3:
http://postimg.org/image/554gf7i3x/
After Boot camp let me decide how many GB, I want to save for Windows... I got 500GB (half) and clicking 'Install'... but the problem is here...
It is said that: "Boot Camp can not detect Windows supports software.." and so on.
Where do you think the problem is? Is - this problem on the ISO file?
I would appreciate any kind of help,
Thank you.
What year/model is your Mac? Please see step 11 in install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support .
-
Can you get the screen is on-air on the classic to display on a second screen?
OK long shot and I think that I I already know the answer is no, but here's what I want to do:
I will be installing an iPod interface to my OEM car stereo, with control of load and playback via the car stereo/CD changer port. -No info on track return to the display of the car in this solution.
The ideal solution is to hide the iPod in the armrest, run a video of small groups of power for a 4.3 "TFT LCD that I also use for a backup camera (two screens of entry)
Ideally this second screen would display the same "screen is on the air than the iPod as well as works of art news and artist of the normal Beach/album.
I'm very technically competent and capable of doing custom wiring, but I'm after a bit of feasibility info!
Doubtful, although probably not impossible given enough skill and technical expertise. But the iPod is not in a usable state easily; the case would open with fortune son hanging out of him.
You can transmit a composite video signal on the dock, use connector of this
http://www.Apple.com/shop/product/MC748AM/A/Apple-Composite-AV-cable
but it is to show a video or a slide show, do not for the mirroring of what is on the screen of the iPod.
Maybe you are looking for
-
I touched something that took the side bar that had my addresses in it when I write or send an e-mail. I don't know how to get it back.
-
His plane will stop when the new tab is open on Mac.
Please share the steps to do this stop to be heard.
-
See only the plans of sites facebook and yahoo-can't get to home pages
When I go on Facebook and Yahoo, all that appears, is what seems to be their site is mapped. I can't get anywhere else, including the home pages.
-
Pavilion dm4: Pavilion dm4 freezes when it is plugged
My laptop slows down every few minutes while it is plugged. When I remove the load, it works well.
-
Windows guard stop my PowerDirector 8 program when I try to save the changes.
I work with the Director of Power 8. When I try to save changes I get the error message "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. I am able to edit and record