Getting the error "Windows can't detect a homegroup on this network" join the homegroup

Similar Questions

• Can't join a homegroup error "Windows can't detect a homegroup on this network."

  Original title: Cannot join a homegroup

  I have 4 PCs in my Home Network, called "IqbalHome". Two of them are desktop computers (both are a Dell Optiplex 760 with Windows 8 Enterprise) and two of them are laptops (Dell N4050 with Windows 8 Enterprise and HP Pavilion with Windows 8 Enterprise g4). All windows are updated and activated.
  Now, my Homegoup is running on Dell N4050 with Windows 8 enterprise and other computers have joined it with success, but when I try to join my new G4 HP Pavilion, it takes 4-5 minutes in the treatment and then says that "Windows can't detect a homegroup on this network. To create a new Homegroup click OK and open homegroup in Control Panel. ', and I can't even open its resources from the 'network' in my computer.
  I checked the 'advanced settings sharing' of 'Network and sharing Center' in the control panel and both have the same settings and connected to the network as a private network wireless. I tried all solutions here are http://windows.microsoft.com/en-US/windows-8/homegroup-problems-in-windows, but could not get this to work.
  These are the network settings for computers:
  (1) connected to the Tenda W150D WiFi and ADSL modem
  (2) HP Pavilion has "192.168.0.4" IP and Dell N4050 "192.168.0.50' with the same mask subnet, gateway and DNS.
  (3) advanced sharing settings are the same.
  (4) network discovery is running and all the services are great too.
  (5) HP with 192.168.0.4 can get ping 192.168.0.50 in 2-3 ms, but when I try to go through the network, it is said, 'Path network not found' and when I diagnose the problem, he said, "the remote device or resource accepts the connection".
  The confusing thing is that I can still access the Dell N4050 on other computers and use its shared resources, but the problem is only with HP Pavilion. I really don't like Windows to do this and I'm planning to switch to Linux as Windows is not a developer friendly environment, there are a lot of annoying things in it.
  Any kind of help will be really appreciated.

  Hello

  Did you make any changes before the show?

  Method 1:

  Temporarily disable the software antivirus (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  I suggest you go through the links and check.

  The homegroup Windows problems

  http://Windows.Microsoft.com/en-us/Windows-8/HomeGroup-problems-in-Windows

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-8&V1H=win8tab1&V2H=win7tab1

  What it takes to set up a home network

  http://Windows.Microsoft.com/en-us/Windows-8/what-you-need-Setup-home-network

  Sharing of files and printers

  http://Windows.Microsoft.com/en-us/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Do get back to us and let us know the State of the question in the case where you need further help or your next post. We, at tender Microsoft to excellence.

• Loading magic jack I get an error: Windows Firewall has blocked some features of this program.

  Windows security alert...

  I installed MajicJack phone on the computer and created an Exception for MJ in the Windows Firewall Exceptions tab. However, when MJ loading an error message says that firewall Windows has blocked some features of this program. The message does not give me an option to unlock. What should I do as I already created an exception?

  Hello

  1. are you referring to the Windows Firewall or any other firewall?

  2 have you made changes on the computer before this problem?

  3. facing this problem with taking magic or any other application?

  I suggest you try the following steps.

  Step 1:

  If you use Windows Firewall, disable the firewall and check the status of the issue.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions? http://support.Microsoft.com/kb/283673

  Note: make sure that you enable the antivirus software, other security and firewall programs.
  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  Step 2:

  If the application works fine after disabling the firewall, turn on the firewall and check the status of the issue.

  If the problem persists, please check the Event Viewer logs and respond with more information to help you better.

  How to view and manage event logs in Event Viewer in Windows XP http://support.microsoft.com/kb/308427

• I want to install windows 7 and I end up getting (0x3E7) error, how can I go about it. ?

  I want to install windows 7 and I end up getting (0x3E7) error, how can I go about it. ?

  Are you upgrading from a previous version of an earlier version of Windows or to do a clean custom install?

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  original title: pc maintenance

  Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  Make a right click on the folder responds slowly and sometimes get an error "windows does not.

  This could be due to so many things. Malware, applications in resources, solutions anti-virus, hard drives damaged, damaged file system, processor ram capacity limitation...

  can't tell what your problem exactly, you can use the reliability monitor, event viewer to discover additional problems...

  What does it mean when a program is not responding? http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC

• Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt

  Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt. The same is not solved.

  I'm unable to locate networks wireless on my Windows 7 PC. Help, please.

  Try to uninstall/reinstall the drivers for your wireless network. You should be able to get them from from Toshiba Web site.

  I hope this helps.

• Ive Osx 10.9.3 using Safari 7.0.4 and try all the remedies (allow you to uninstall old adobe plug-ins etc.) I still get an error notice can't complete installation. ? What next pleaset

  Ive Osx 10.9.3 using Safari 7.0.4 and try all the remedies (allow you to uninstall old adobe plug-ins etc.) I still get an error notice can't complete installation. ? What next pleaset

  Try this installer: http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g

• I get a message saying that windows has detected another computer on this network. I have another computer could be this one

  I get the message windows has detected another computer on this network.i have another computer could be this one and is it a problem?

  Hello

  1 have you added the other computer on the network?

  2 have you made changes on the computer before this problem?

  3. When do you have this error code or error message?

  The computer has detected in the network may be the other that you have, you will need to check the network and check the name of the computer. I would suggest trying the following methods and check if it helps.

  Method 1:
  You can get a new IP address from your computer. You will need to do if you encounter connection problems.

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  c. enough at the command prompt ipconfig and press ENTER. This frees up your current IP address.

  d. ipconfig / renew in command prompt and press ENTER.

  The DHCP configuration for all adapters is renewed. To renew the IP address for a
  specific adapter, type the name of the map that appears when you type ipconfig at the command prompt.

   

  Method 2:
  If the problem persists and you have not Windows Vista Service Pack installed then you can refer to the link below and check if you use the fix passes solve you the problem.

  http://support.Microsoft.com/kb/948363

  Hope the information is useful.

• When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package.

  Original title: I'm loading Quciktime.

  When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?

  Hi Tonyb13apb,

  ·         The issue is limited only during the installation of QuickTime?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Uninstall and reinstall QuickTime and check.

  http://support.Apple.com/kb/HT1925

   

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  a. click Start, select run.

  b. type msconfigand click OK.

  c. the system dialog Configuration utility appears.

  d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  e. When prompted, click on restart to restart the computer.

  If the problem persists, you can contact Apple support for more help and information.

  http://support.Apple.com/kb/HE57

  Let us know if it helps.

• I am trying to update my creative cloud but am getting an error Code: 3 How do I over come this?

  I am trying to update my creative cloud but am getting an error Code: 3 How do I over come this?

  Hi Heather,

  You can follow the thread: creative cloud update - error code: 3 where this problem is already discussed and resolved.

  You can also follow article: error "Unable to install" received when installing Adobe Creative Cloud desktop application that will help you solve the problem.

  Thank you

  Yann Arora

• I can't download my pictures from my camera or from disk. I get an error code. Someone knows how to fix this? The error code is 0 x 80010108

  I can't download my pictures from my camera or from disk.
  I get an error code. Ox80010108
  Any help? Enjoy

  Hello

  1 when you download the pictures?

  I suggest that you put the computer to boot and then try to upload the image, follow step 1 to set the computer to boot.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

• exe files will not run any programs downloaded recently is not working, error windows can't find the app

  to start windows once the password inserted tab windows process error oxcooooo7b error, I can't access msconfig or regedit nothing extends box run same mistakes for new programs

  c:\windows\system32\msconfig.exe the procedure could not be found, some programs in place same tab all recent programs that I downloaded, I get the same error

  Windows 7 ultimate

  8 GB ram

  desktop PC

  any help app thank you

  Hi Neil,

  Thanks for the reply.

  I suggest going through the article and follow the steps.

  Cannot open. Files EXE in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2688326

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://windows.microsoft.com/en-US/windows7/Back-up-the-registry )

  How to back up and restore the registry in Windows.

  It will be useful. Get back to us with the results.

• I get an error "Windows cannot find"C:\Users\Steph\Downloads\APPLICATION F0RM.zip". Make sure you typed the name correctly"when I try to open a ZIP file.

  Hi, I applied for a job in which they said send me an application form who sent in a zip format, so I clicked on the link to download in which came on the download area of Firefox so I tried to click and it did not open so then I tried it on Chrome and this message popped up.
  Windows cannot find 'C:\Users\Steph\Downloads\APPLICATION F0RM.zip'. Make sure you typed the name correctly and then try again.
  Can someone help me to open this file?
  I restored the computer and nothing changed so I tried to search for the file and it didn't turn up.
  Thank you!

  Original title: Windows cannot find ' C:\... zip "make sure you typed the name correctly, and then try again.

  Hi StephanieCowley,

  Thanks for posting in the Microsoft Community.

  In addition, how are you doing today?

  You have a problem with opening the Zip files on the computer. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team and try to get this fixed number.

  We start with a few questions-

  (1) is this problem limited to opening files on Mozilla Firefox and Google Chrome?

  (2) you are able to open other files zip on the computer?

  (3) you have a program to open ZIP files installed on the computer?

  (4) you are able to open the same file on another computer (running the same version of the operating system)?

  (5) you get an error code?

  (6) do you have made further changes on the computer before the show?

  I would like more information about the issue.

  It is possible the file association by default to open this type of file is either corrupted or needs to be changed.

  Method 1-

  I would like that you try to open other files zip on the computer. Check if it helps.

  Method 2-

  I would have you scan a System File Checker to verify violations of integrity.

  See the article-

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2-

  I would have you look at the article-

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• I bought Photoshop CS6 Extended (education edition) for Mac. Now ik want to install on my macbook (new). I have the product code and serial number. I get an error code: can be a fake copy. How can I install this program?

  In 2012, I bought Photoshop CS6 Extended (academic edition) for Mac. Now, I want to install it on my new Macbook. I have the serial number and the product code, but I get an error message: the software can be a fake copy, etc... What should do?

  Hugo please turn off your email signature.

  If your serial number is registered as being valid in establishing http://www.adobe.com/ then I recommend getting a new copy the installation files.  You can find details on how to locate your serial number to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  To download a new copy of the installation of the files see please Download produced CS6.