Windows cannot detect my proxy settings

Similar Questions

• 48 hours ago windows xp media played .m3u files, now get error Windows Media Player C00D1198 (automatically detect the proxy settings is selected)

  48 hours ago, I was able to play samples of the song from Amazon (.m3u files) using Windows XP SP3 Windows Media Player.  Yesterday and also today in an attempt to the same on Amazon, I get error C00D1198 on WMP-

  "windows media center cannot connect to the server the server name may be incorrect, the server may not be available, or your proxy settings are may not be incorrect.

  Automatically detect the proxy settings is enabled

  I did not bring any changes to the computer or downloaded codecs, not played any other player, and in the meantime has used another music site, etc.

  Thank you in advance for your help!

  http://Windows.Microsoft.com/en-GB/Windows7/c00d1198

  I guess you can still play all the other music ok?

• Satellite 1700: Windows cannot detect the CD Rom drive

  CD drive on my laptop Satellite 1700 working under Windows. Windows cannot detect, but it works very well in mode cd player.

  Hello

  I have a question.
  Your drive is missing from the 'My computer' zone or the Device Manager displays a disk error?

  If the drive can be recognized in the BIOS, so I guess that the entries in the Windows registry are damaged or not right.
  I found this Microsoft Knowledge base and I think he should solve your problem.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  Please check and after if it succeeded.

• Error - because of unidentified problem, Windows cannot display the firewall settings

  Original title: Firewall Windows are not accessible to stop?

  Recently installed MSE.  Now, I can't launch Samsung Allshare to view files on the Samsung TV.  Firewall Windows is not accessible to stop temporarily so that Allshare can run.  All that is shown is "Because of problem not identified, Windows cannot display the firewall settings."  It seems that MSE has hidden and I can't determine how to communicate with them without going through the process of uninstalling and re-installing.

  Hello

  1 Windows operating system you are using?

  2. when exactly you get the error message?

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  If the problem is not resolved, please provide more information to help you best.

• "An undentified problem, windows cannot display the firewall settings" during a turn on the firewall.

  Original title:

  Windows firewall error desabaled

  I have windows xp - help mechanic iolo - my firewall is deactivated automatically - when I click on activate up to a mistake pop [there was a firewall of windows activation error] and then I click on the top of the pop - windows firewall - Open button error [due to an undentified problem, windows cannot display the firewall settings].

  my firewall won't come to help me.

  Hello
  1. You did changes to the computer before the show?
  2. What service pack is installed on the computer?
  Method 1:
  You can run the fixit from following link and check the issue:
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074
  
  

  Let us know if it helps!

• Removed the Trojan.Dropper.PE4 and now windows cannot display the firewall settings.

  XP SP3.  MalwareBytes removed Trojan.Dropper.PE4 today.  Now, "due to an unidentified problem, windows cannot display the firewall settings".  I've also scanned with SuperAntiSyware and Spybot.  Also, when I open Windows Explorer, Control Panel, etc. the display settings have changed.  Help, please.

  Hello
  Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  I found another thread in Microsoft Answers relating to this problem, but who said to go into Services and see if the firewall is configured to automatically start.  However, I can't find a Windows Firewall item in the Services Menu.

  I have the PC Tools Spyware Doctor antivirus.

  I had to do a complete recovery system... which sets just need to make sure that you back up your files.

• Receiver error message: 'due to unidentiferd problem windows can not display fire wall settings' and windows cannot display the firewall settings.

  Original title: windows cannot display HELP fire wall settings

  I go to the control panel and click on firewall and I get this message "due to unidentiferd problem windows can not view fire wall settings.

  I want to check that it is on.  Any suggestions?

  I can't also on the wall of fire to the security settings in the control panel.

  Help

  Hi TomFlow,

  1. which edition of Windows XP you are using?

  2 did you a recent software or hardware changes to the system?

  Method 1:

  You can try to start the Fixit from link and check if it helps:

  Diagnose and automatically fix problems of Windows Firewall service

  Method 2:

  We can refer to the article and try the steps.

  You cannot start the Windows Firewall service in Windows XP SP2

  Important: The above article tells you how to edit the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

  Method 3:

  You can also try the steps in the following article:

  You cannot enable or disable the Windows Firewall setting on a Windows XP Service Pack 2

• 10 Windows cannot detect the Nvidia GPU, I'm lost...

  So here's the deal; After weeks "Please install w10" spam I finally gave a w10 installed on my Alienware Laptop m17x. After that, my computer has forgotten the Nvidia card installed, and no matter what I tried it does not detect the GPU. So I used the button of regret and I went back to my original w7 configuration, but my problem followed me and still it cannot detect my Nvidia GPU. I tried to install and reinsall the Explorer GeForce, but nothing. Any suggestions please?

  Now, Windows 7-64, right?

  PSA or ePSA (Diags, outside of Windows) and see if the NVidia card is detected and tested.

  You can also try Safe Mode.

  Finally, you might want to try a fresh install / cleaning Windows-7 and base drivers (chipset first). You can first to backup Image your current installation.

• I can't turn on my firewall and receive a popup that says "because of a unntified problem, Windows cannot display the firewall settings.

  at this point, I'm lost
  I ran microsoft fix convenience store and identified the firewall problem, she had no solution to the problem

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Try the steps in the following article that may help you.
  You cannot start the Windows Firewall service in Windows XP SP2
  http://support.Microsoft.com/kb/920074

• Cannot change my proxy settings. He is screwing my Skype!

  There is the screenshot of it

  I think it's the reason why my Skype says "Skype cannot connect.

  

  `

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• How to disable detect the proxy server domain controller settings 2003

  Hello everyone,
  Here's the scenario

  Server:
  2003 domain controller
  By default IE installed: IE 6

  Client:
  Windows XP
  Internet Explorer version 8.

  Problem.
  Once a connection to domain to his machine (client) and open IE user it takes about 2 to 6 minutes to load correctly. It detects message proxy settings in the background (which can be) the cause of the problem. I want to bypass detection pox affecting as well and for that, in group policy, I enabled these settings.

  the main objective is to reduce the delay for IE load the home page at end of client in the above configuration.

  What should I do?

  Thanks in advance.

  On the client machine, to appear:

  Control Panel-> Internet Options.

  Click on the 'Connections' tab at the top

  Click on the "Network settings" button near the bottom

  Uncheck "automatically detect connection settings.

  Change other settings that you need on this page, as it will fit is no longer automatically.

  "OK" your way out

  HTH,

  JW

• I'm unable to display links to an online class in Media Player, says I need to configure the proxy settings

  I'm the unab to display links to an online class. Media Player opens, then he said that I need c alter my internet proxy settings. What should I do?

  Hello

  What is the exact error message when you try to open links through Windows Media Player?

  Check your proxy server settings and check if that helps.

  (a) on the Tools menu, click Options and then click the network tab.

  (b) check your settings in the Streaming proxy settings area.

  Notes:

  ·         If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure and select

  ·         Automatically detect the proxy settings or use the proxy settings of the browser (available for HTTP protocol only).

  ·         If you are connected to the Internet via a dial-up connection, you may not be able to choose the proxy server. For more information,.