Windows cannot read the properties

Similar Questions

• Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.

  Original title: System Event Notification Service does not connect.

  Computer will not start.  Error message states that Windows cannot read the Service Notification of system events.

  Hi DACL.

  ·        What is the full error you receive when you try to start the machine?

  ·        You did it all change hardware or software on your machine before this problem?

  You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot read the disk in drive c.

  I recently bought 5 blank DVDs to burn files, but when I put the disk, it showed no AutoPlay, even if I check suggestions asking me every time, but when I double click on the CD player, it says this message, "Windows cannot read the disk in drive c." can someone help me with this problem?

  Not all DVDs are the same, there are many different types and some DVD players may require a particular type

  If the DVD is blank has nothing to read, that it is not formatted/prepared

  With a dvd in the drive, in Solution Explorer, select a file, rt-click and select send to DVD, it works

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• account operators cannot read the properties of the user object

  Hello

  I have peripheral setup VPN to authenticate LDAP and have created an account (for example vpnuser) liaison for the device with the builtin account operators group membership.
  It's that it can not read the properties of the user as memberof.
  However if I explicitly read permissions to the account vpnuser then it works.
  Even when he added the account group always vpnuser Domain Admins cannot get the memberof property.
  I have already confirmed that account operators have full control over user objects and I did no setting on the default permissions except for the above to solve problems.
  All the tips, troubleshooting tips, please?
  Thank you so much everyone

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows IT Pro Forums. Please post your question in the Technet Windows Forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

   
   
   

• Windows Vista CD problems - "Windows cannot read the disc in the drive E:\. Make sure that the disc uses a firmat Windows recognizes.

  Original title: problems of Windows Vista CD

  Windows Vista Home premium. You want to burn on a CD - RW disc image files. Inserted the disc in the drive and got the message "Windows is unable to read the disc in the drive E:\. Make sure that the disc uses a firmat Windows recognizes. If the drive is not formatted, you must format it before you use it. "I can't get a dialog to come so that I could format. Not had this problem with a disc previous out of the box Memorex even.

  My problem has been resolved by the www.mydigitallife.info/autoplayautorun-not-working-or-missing-not-open-in-windows-vista/ procedure. The first element - material Detection service kernel - managed.

• "windows cannot read the disk in drive F: / '.

  Windows no longer recognizes when I insert a blank disc in my computer. I want to save my pictures using Windows Photo Gallery, but only to pass messages to insert a disc, even if it is already in. When I go to 'my computer', click the icon of the cd player it just says: "windows is unable to read the disc. Is there a fix windows or is it my drive?

  Try a different brand of disc.

  You can run Microsoft 'fix it' utility to control the cd player.

  Also uninstall and reinstall the driver from the cd rom by Device Manager.

  Good luck.

  Higher than http://www.computerstar.ca/ tech

• Windows cannot read the disc in the drive F:\

  Hello

  HP laptop with Windows 7 Home Basic 64 bit, I bought the CD room worked well and I did not use the CD room for a long time so I inserted the blank CD and when I had just the triad to open the CD drive f:\ he says «Windows is unable to read the disc in the drive F:\» "and when I triad to burn the image on CD, it says"Windows can not burn the image drive f:\, please insert a writable disc in drive f:\. "and I triad to see if GTA IV Episode From Liberty City CD will work or not it worked but did not show the CD icon and the Autorun does not work and I tried other CD and I had the same problem that the autorun does not work and no icon for the CD.
  Here are some pictures:
  http://imgur.com/a/2vTXl#0

  I knew how to fix it

  Here is the http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-does-not-recognise-a-blank-disc-in-a-dvd/d6bed94f-c9df-45fd-9a54-51d5d5575b91 solution.

• X 220-windows cannot read the type of machine

  My X 220 recently had the motherboard replaced at a local authorized Lenovo service provider. They were only supposed to replace the fan but the connector broken speaker when they have been to remove the Board of Directors. Currently, Windows is not able to read the type of machine. System update does not work because of this. CPU - Z and hwinfo64 show the kind of machine that qqqqCTO as if she was a Virgin in the BIOS. Type of machine is properly in the BIOS correctly, but they left the serial number of the empty system. Could that be the cause?

  In case someone else runs into this problem: I solved the problem by running the BIOS update utility and using the option to change the model number. There is a note that says to delete what's there and leave the field blank to restore the factory setting. That did the trick.

• Windows cannot read the disc in the drive E:\

  When I put a CD - R or DVD-R in the E: drive, I get a message "make sure the disc uses a format windows recognizes." If the drive is not formatted, you must format it before you use it. »
  I use new formatted discs, also when I put a CD - R in the drive E has some files word on it, it will start and I can see all the files and I can edit, print and save, but I can't add another word file, although there is plenty of space on the disk.
  I think that if a disc is not formatted when I put it in drive E I should get a pop-up with the option to format.
  I am running Vista Home Premium - SP-1

  Rick

  Hi Ricky,.

  Thanks for posting on the forums.

  Another user had run into the same issues as you, please take a look at this post and see if you can solve your problem of suggestions other people.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/4e0c8027-7d6b-4694-9c16-e5982202b7de

  Hope that will do it, please post back and let us know ok.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "windows cannot read the disk in drive D": I tried all types of recorded discs,.

  Disk drive is internal in a laptop inspiron 8200, I tried cd & dvd, with photos, music, movies, etc.

  It worked before, if yes, are you aware of the update or install something?

  Tried the Fixit of base?

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Successfully connected to SOPCAST, but Windows Media Player 11 cannot read the media.

  I've successfully connected to SOPCAST, but Windows Media Player11 cannot read the media. I am running XP Professional, Internet Explorer8. Are there settings I need to change to enable P2P?

  Hello

  Try the tool Microsoft Fix It to the article below and check out them.

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• Video card issues 'Windows cannot read this disk. The disc is maybe damaged or it could be in a form that is not compatible with Windows.

  Original title: card video questions

  My company adds two monitors to existing systems that are also running good XP and windows 7. Everything goes smoothly with the exception of one system using windows XP. I replaced the original video card (ATI DELL X 1300 128 MB VIDEO CARD in the PCI-E DVI TV-OUT) with nvidia GeForce 8400 GS and when I try to install the drivers through the disk, I get the following message: "Windows cannot read this disk. The disc's might be corrupted or it could be in a form that is not compatible with Windows. I flashed the BIOS, but still nothing. Do I need a different video card?

  Hi TheRealBradB,

  ·         The computer is on a domain network?

  You can download and install the drivers from the nVidia GeForce 8400 GS video card for site.

  GeForce 8400 GS video card

  http://www.nvidia.com/page/GeForce8.html

  You can run the Autodetect your GPU and check the drivers.

  Also contact nVidia support for help on the issue.

  NVidia support

  http://www.nvidia.com/page/support.html

   

  Hope this information is useful.

• I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

  I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

  It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

• Cannot copy file: cannot read the source code or drive WINDOWS XP

  I'm trying to transfer pictures on my old XP computer on an external hard drive.  After performing a backup on the drive hard seagate WD I went looking for pictures on the external hard drive, and they aren't there.  I went back on the XP machine and tried to copy the files to a CD but I get the message cannot copy file: cannot read the source code or the player.  I can open images but cannot move it to another folder or copy and paste pictures anywhere.  The photos are saved in an outdated version of microsoft's digital imaging software.  Help, please.

  Hello

  (1) is the specific question of the images?

  (2) where the images are on the computer?

  You can try the following methods and check the status of the issue.

  Method 1:

  Configure the computer to clean start State to check software conflicts. See the following link on how to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 4 of the above article.

  Method 2:

  If the problem is specific to the pictures folder, then it might be a problem with permission. You can try to take ownership of the folder and check if you can transfer it. read the following article.

  How to capture a file or a folder in Windows XP?

  http://support.Microsoft.com/kb/308421