Windows cannot update and cannot install Office

Similar Questions

• Windows Update cannot install Office SP2 and KB973924; codes error 78(f) and 643

  Hello

  I'm currently under Windows 7 64 bit which has been updated to XP in January this year.

  Since July, Windows 7 update tried to install following updates without success:

  1) the 2007 Microsoft Office Suite Service Pack 2 (SP1/SP2) - error code generated 78(f)

  (2) security Update for Microsoft Visual C++ 2008 Redistributable Package (KB973924) - 643 generated error code

  Windows Update tried to install these several times but without success.

  Also, I tried to install iTunes and get the following error:

  "An error occurred during the installation of assembly"Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32", processorArchitecture, publickeyToken = "1fc8b3b9a1e18e3b" is"x 86".  See Help and Support for more information.  HRESULT: 0 X 80070002. »

  I tried many internet research to try and find a solution to these problems but have had no success.  I tried the following:

  (1) re-intsalled .net framework 4

  (2) run the System File Checker that could not so I tried my windows disk, but it could not start because the message says that two updates were waiting to be installed

  Now, I'm really worried that I have a big problem with Windows.

  Well, any help that you can give to avoid reinstalling my system would be appreiated.

  Thank you very much

  Thanks for your help Irfan H and PA bear but unfortunately none of the above suggestions has solved my problem and I couldn't find another solution on the internet that worked.

  Finally, I had to do a clean install of my system using an image of my hard drive that I created during my first installation of windows 7.  Now, everything seems to work properly and installing updates without problems.

  Thanks again.

• Windows cannot install your printer driver and / or utility

  I have an Epson SX200 printer all-in-one and I am trying to install the device on a Vista 32 Dell laptop.  I don't have the disk for the printer, so I try to download the drivers for the printer on the epson site.

  I downloaded the drivers scanner and software sucsessfully, trying to download the point of finishing extracing printer driver files, I get an error message saying "Windows cannot install your printer driver and / or public services."

  I tried the support of epson who tried intsalling the pilot from other web sources, bottom of dissabling starting programs, etc.

  I searched the web but cannot find any patches or explanation to the problem...

  Any ideas?

  Hi J Bielawski,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Check whether the problem is resolved.

  Method 2:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• How to uninstall microsoft no product which has not been installed good product is intunemp3 (error windows cannot install acsess)

  I downloaded intunemp3 to get music, but it did not work properly so I tried to uninstall the product and all I get is (error windows cannot install acsess, this can happen if the installation program has not been installed correctly) and as it happened I met other problems which I think may be related to the first problem. When I use my system tools to defragment files, it only that Flash and never starts, when I try to download windows updates they fail.even when I try to run a security scan the sas error McAfee has encountered a problem please click Home and try again. can any body out there help me out?

  Thank you

  Donald

  Try to do a system restore: click on start, all programs, accessories, System Tools, System Restore.  Then choose the restore point from when itunes tried to install.  If this does not work, let me know and I can give you another way to do it.

• Store Windows cannot install software, error code: 0 x 80248014

  Store Windows cannot install software, error code: 0 x 80248014

  Original title: Windows Store

  Hello

  
  I suggest you rename the temporary folder C:\Windows\SoftwareDistribution:

  1. click on start, run, type: cmd and press ENTER. Run the following command in the opened window.

  net stop WuAuServ

  2. click on start, run, type: %windir%, and then press ENTER.
  3. in the opened folder, rename the folder C:\Windows\SoftwareDistribution to SDold.
  4. click on start, run, type: cmd and press ENTER. Run the following command in the opened window.

  net start WuAuServ

  Visit the Windows Update site to check this problem. If it works then it's a corrupted Windows Update file and we need to delete the folder in which it resides.

  Hope this helps, good luck :)

• get error 0 x code 80300001 windows cannot install on the specified location

  try to install vista on a new hard drive on my computer laptop hp dv6810, but get the error code 0 x 80300001. Windows cannot install to the specified location.

  the installation program recognizes my hard drive, we'll format me and partition but will not be installed. im not that well informed about computers then be simple and detailed with your answer. Thank you.

  Hello

  (1) you are able to change the settings in the BIOS?

  Check the below link that can help you in the matter of fixing.

  http://support.Microsoft.com/kb/925481

  Also to ensure that material supports the installation of Windows Vista on your computer.

  Hope this information helps.

• Windows cannot install required files 0 x 80070017

  I was unable to install the Vista SP1 on Compaq Presario laptop. I bought the professional vista with sp1 and tried to install it, but the following message.

  Windows cannot install required... files error code: 0 x 80070017

  I tried to format the drive, but the power lost along the way, but the error came both before and after calving.

  The bios does not have the ability to set the drive sata to DCIS or gives it the possibility of the enslavement of the DVD on the HARD drive... any suggestions?

  Hello

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to clean install vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Error: "Windows cannot install to the selected location. Error: 0 x 80300001. »

  When I try to install Windows 7 on my Toshiba computer formatted I get this error message after trying to install the RAID driver during the installation process:

  "Windows cannot install to the selected location. "Error: 0 x 80300001.

  I'm unable to proceed with the installation. Can someone please?

  Hi Jon,

  This error can occur during a clean Windows 7 install the operating system installation media is not in the drive. This happens usually when a user is necessary for the exchange of discs in order to install the necessary drivers on the system and the operating system disks were not placed in the drive before proceeding with the installation.

  The error would not occur if the Setup program has been started using a USB key as stable media would not be switched.
   
  The solution would be to change the driver CD or DVD of Windows 7 install DVD media when this happens, then we can continue with the installation of Windows 7. In this particular case, it is likely that the RAID driver disk has been left in the drive.

  Note: This problem/error appeared less in Windows Vista since a message asking to specify the installation media usually as follows:

  "Please insert the disc 1 installation of Windows.

  Dan

• Windows cannot install the Canon MF8300C series UFRII Lt kernel-mode print driver.

  I have upgraded to windows 8. Now I can't print. Called Canon, ran uninstall it, reinstall and got this error

  Windows cannot install the Canon MF8300C series UFRII Lt kernel-mode print driver. To obtain a driver that is compatible with the version of windows running with the manufacturer.

  Hello

  Thank you for giving us the opportunity to help you.

  Depending on your problem, you have upgraded to Windows 8, but you are not able to print through Canon MF8300C series UFRII you found the error.

  I would like to ask you a few questions about it.

  (1) have you been able to print earlier?
  (2) do you have a driver with this printer support?
  (3) are you an error during the installation of the printer driver?

  Installing the driver in Compatibility Mode

  Please follow the steps below to install in compatibility mode:

  (a) make a right click the driver installation file and select properties and then tap or click on the Compatibility tab.
  (b) check the run this program in compatibility mode for: box.
  (c) press or click the menu drop down and select a previous operating system, and then tap or click OK.
  (d) try to install the driver and verify.

  For more reference, you can go through the link given below.

  You can also search the driver from the link given below.

  http://www.USA.Canon.com/Cusa/consumer/products/printers_multifunction

  Hope your problem is solved now, please write us back if the problem persists.

• Can not install windows KB973917 update and getting error code 8000FFF

  I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM.  I can't install the windows KB973917 update and getting error code 8000FFF.  I have tried everything to fix it, but have had no luck.  Someone had the same problem?

  A few suggestions here: http://taurarian.mvps.org/WU_Vista/8000ffff.htm

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

• Windows cannot install required files. File is possibly corrupted or missing. Error code 0 x 80070570

  I have Windows 7 Professional upgrade disk. I select custom installation. the trial ends approximately 54% then displays this message: Windows cannot install required files. File is possibly corrupted or missing. Error code 0 x 80070570 do - what I do?

  try to install by removing a strip of memory (RAM) If you have 2 stick of ram installed.

• client id: 0328990515 my laptop has a problem and needs to be updated and re - install adobe photosh

  client code without 0328990515

  my laptop has a problem and needs to be updated and re - install the adobe photoshop cs6 extended. But after running the Installer "initalling", nothing happened. Cannot re - install the adobe photoshop cs6 extended.

  Need help urgent as it is essential for my study.

  Thank you

  Uninstall ps cs6.

  Run the vacuum cleaner (http://www.adobe.com/support/contact/cscleanertool.html).

  you restart computer.

  Reinstall the cs6 ext ps.

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Windows Vista update will not install and causes cell phone restart. Laptop will not reboot and Startup Repair cannot fix the problem.

  Windows Update tried to install 4 days now. Every time he tries it tells me it failed and trying to install in manually. He said then the laptop restarts, but it does not start. Startup Repair tells me that it cannot solve the problems.
  I don't know how to go beyond this problem, can someone help me? I have no disk Vista as it came pre-installed on my laptop. Help, please!

  If your Vista is preinstalled, ANY support for your laptop is the manufacturer of the computer, not Microsoft.

  Try this:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not she, transfer your question in the appropriate Forum:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install Office 2013 updates manually or through Windows Update

  I can't install 17 updates for Office 2013, each date of 12/02/2013, through Windows Update or manually.

  I get a "Code 80070643" error message when you try to install these updates through Windows Update. I performed the steps of troubleshooting for Windows Update, including diagnoses FixIt and the fix for the .net framework, I uninstalled and reinstalled Office 365 Home Premium, try a clean boot installation I downloaded two files to install manually, and these attempts also failed. The result of this tells me that it is a problem of Office and is not a problem of Windows Update, but given what I tried, I don't know what to try next.

  Hi Rmiller,

  Thanks for posting your query in Microsoft Community and thank you for the opportunity to help you.

  According to the description, you are faced with problems with .net Framework update and receive error code 80070643.

  I suggest you follow all the steps of the article mentioned below and check:

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/958052

   

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.