Windows connection service cannot be loaded

Similar Questions

• Error message "User profile Service is a not the user of the connection profile cannot be loaded" when you try to connect using the Administrator profile

  Original title: cannot use my administrator profile

  When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

  Original title: cannot use my administrator profile

  When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

  If you cannot connect to your admin account, no tutorials can help you because they need you to connect to an administrator account to carry out the instructions.

  See if the following can get an admin account...

  Go to Safe Mode...

  Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.

  Now, while in safe mode, you perform one of the following?

  1 can connect to your account admin without the error message?
  If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If the system restore does not slove the problem, then use this tutorial

  http://support.Microsoft.com/kb/947215

  2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
  If so, you are lucky. This is the built-in Administrator account.
  There is, by default, no password.
  It could connect and do the system restore.

  If the system restore is not enough, then perform the tutorial even as above:
  http://support.Microsoft.com/kb/947215

  If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.

• The Windows fax service cannot start because there is no such thing as a privilege in the fax service account.

  I'm trying to set up Windows Fax and Scan to store faxes "received" in a folder encrypted (EFS). (I use Windows Vista Business).

  The fax service will not start if it set to log on as a "local system account", but faxes are stored with the certificate of local system and inaccessible to other users.

  To work around this problem, I tried to configure the Fax Service to log on under a specific user account. However, after that and try to re - start the Service I get.

  Error: 1297 as a service privilege is needed to function properly does not exist in the service account configuration.

  One of the services that begins with the "local system account" does not automatically start with a normal user account and if you get the message.  Most of the services are designed to start with the local system account and not a special user account (actually, not on my system using a specific user account for services).  I think that part is OK and you must return it to the local system account (so eliminate the error message and remove that as a problem to solve).

  I think the question may also be a permissions problem in the user access to the fax.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If that is indeed a problem of certificates (and it seems there is a but looks like he takes care of himself with the Wizard), then we must make the certificate available to all users of the system (from where it is now stored) - and I think I saw how to do this in secpol.msc.  Here is some information I found on EFS secpol.msc in the public key policies (you can get it by entering this in the area of research and the antering and then a double click on the program icon that appears) where you would put in place.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The Encrypting File System (EFS) is an encryption technology of base file used to store the encrypted files on NTFS file system volumes. Encrypted files cannot be used unless the user has access to the keys needed to decrypt the information.

  Encryption is transparent to the user that encrypted the file. This means that you don't have to manually decrypt the encrypted file before that you can use. You can open and edit the file as you normally would. Once you encrypt a file or folder, you work with the encrypted file, or a folder like you do with any other file or folder.

  The use of EFS is similar to using permissions on files and folders. Both methods can be used to restrict access to the data. However, an attacker who gets physical access unauthorized to your encrypted files or folders will be prevented from reading. If the intruder tries to open or copy your encrypted file or folder, he or she receives an access denied message. Permissions on files and folders do not protect against unauthorized physical attacks.

  You encrypt or decrypt a folder or file by setting the property of encryption for files and folders, as you define another attribute such as read-only, compressed, or hidden. If you encrypt a folder, all files and subfolders created in the encrypted folder are automatically encrypted. It is recommended that you encrypt at the folder level.

  You can also encrypt or decrypt a file or folder using the Cipher command.

  When you work with encrypted files and folders, keep in mind the following information:

  • Only the files and folders on NTFS volumes can be encrypted. However, you can use Web distributed authoring and versioning (WebDAV), which also works with NTFS, to transfer files in encrypted form.
  • Files or compressed files can also be encrypted. If the user marks a file or folder for encryption, that file or folder will be uncompressed.
  • Encrypted files are decrypted if you copy or move the file to a volume that is not an NTFS volume.
  • Moving files unencrypted in an encrypted folder will automatically cause these files to be encrypted in the new folder. However, the reverse will not automatically decrypt files. The files must be explicitly decrypted.
  • Files marked with the system attribute cannot be encrypted, nor can files in the system root directory structure.
  • Encrypt a file or a folder does not protect against the removal or the list of files or directories. Anyone with the appropriate permissions can delete or list encrypted folders or files. For this reason, the use of EFS in combination with NTFS permissions is recommended.
  • You can encrypt or decrypt files and files located on a remote computer that has been enabled for remote encryption, but, in this version of Windows, the data that is transmitted over the network by this process is not encrypted. Other protocols, such as Secure Socket Layer/Transport Layer Security (SSL/TLS) or Internet Protocol security (IPsec) must be used to encrypt data while they are transmitted over the network. (You can also use WebDAV, as described in the first bullet, to pass the file in encrypted form.)

  EFS policy settings

  You can use Group Policy to configure a number of EFS settings.

  Allow or disallow the EFS

  You can choose to allow or prohibit the use of EFS altogether. If you do not configure the policy settings for EFS, it is OK.

  The EFS options

  If you choose to allow EFS, you can also select a number of options, such as whether to automatically encrypt the Documents folder of the user, to require a smart card for use with EFS, to cache keys created based on a smart card, to enable the encryption of the Windows page file, or to notify users to make the backup copies of their encryption keys.

  EFS certificate

  EFS encryption is based on the pairs of keys associated with certificates. In most managed environments, the certificates are issued by a certification authority (CA) running in the field. Users can automatically be issued a certificate from the CA without manual intervention. EFS settings include a drop-down models of certificates that are available in the field list so that you can specify which certificate template to use for autoenrollment.

  Note
  	The list includes all the models of certificates, present in the field. An administrator must configure the CA so that certificates can be issued. Some displayed certificates are not available.

  In cases where a certificate cannot be issued by a certification authority, EFS can use a self-signed certificate created on the local computer (there is a section in secpol.msc to create a certificate). You can choose to disable this functionality and specify a default key length.

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I don't know if that helped or not.  Please let us know and be specific about what other questions, you may have because I don't know what you mean and which is still confusing (and to be honest, I am a little confused at this point - it is not an easy task to accomplish).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• Windows Search service cannot start the system cannot find the path specified.

  The last important thing I did was to create a new user account.  Not sure how long the summer passes, I'm not looking that often.

  I can find how do, I just need help to find out what it is I do.
  Log name: System

  Source: Service Control Manager

  Date: 15/02/2012-17:22:45

  Event ID: 7000

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer: PC-user

  Description:

  The research service Windows could not start because of the following error:

  The system does not have the specified path.

  The event XML:

   

     

      7000

      0

      2

      0

      0

      0 x 8080000000000000

     

      326251

     

     

      System

      User-PC

     

   

   

      Windows Search

      %%d Ko

   

  Oops, I got it.   I went to turn on and outside research turned rebooted windows features. Here again, to turn back and after another reboot, I'm back in business.

• Windows local service cannot access a shared folder

  Hi all

  Here's my question,
  My application (windows service) can not access the shared folder. What should I do to make this access?
  client OS (where my app): windows 2003 R2
  Server operating system (where the shared folder is): windows 7
  I tried to add login ANONYMOUS for authorization groups and that each has the access rights on the shared folder, but it does not work
  Please help on this.
  Thank you
  Levi

  Hi Levi,

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• Windows Security Service cannot be started, how to fix this?

  Hello
  I use Windows 7 Home Premium. Window Defender won't start. When I click on it in the Panel, he says "this program is disabled." There is a link that says: "If you do not use this program, click here to turn on. When I click on this link I get the message "the dose of specified service does not exist as an installed service (error code: 0 x 80070424)". " When I go to the Panel and the Panel of Services, the program is not listed. So I downloaded the program and tried to install it. He would not have installed. I get an error that says it is part of Windows Vista and requires no installation. It's strange to me that I am running windows 7.
  I then in the center of the Action. There, I found the Windows Security Center Service is disabled. There is a button to turn it on. Thought that would solve my problem I clicked it, only to get the message, "The Windows Security Center Service Can not be started."
  I ran the program Microsoft Fix It. There is no problem. The program is not there or if it is I don't think that and it want let me install it.
  Can you please tell me how to get Windows operational defender and how to get started (running) Windows Service Security Center.
  Thank you... David Sam

  Some other security programs will be disable Windows Defender, it is normal to prevent conflicts.

  Do you have what security/antivirus program installed?

• WIndows Vista user profile cannot be loaded

  Original title: error message when you connect using windows vista home edition saying user profile service failed to use the connection profile cannot be loaded

  second time display error message when the connection using windows vista home edition saying: could not load the user profile service doesn't have the profile of user logon

  Hello

  I suggest you follow the step below and check if it helps.

  Step 1:

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

• Message: The security of Windows service cannot be started

  I get a pop-up windows security problems:

  the Windows security service cannot be started

  How should I do, please?

  Moved from Community Participation

  Original title: windows security

  See if this helps: http://support.microsoft.com/kb/2519899/en-us

• Windows Update service does not and Outlook advanced search does not

  Have Vista Home Premium on an HP laptop. Running Norton Internet Security Antivirus and firewall.
  There is a month upgrade Office 2003 to Office 2010.
  With Office 2003, I used to give a list of updates, and I would choose where I wanted to, but noticed

  recently that I had no updates online. When I click on the button to make an update, nothing happens.
  In addition, advanced search in Outlook does not work, it ends in a microsecond and produces no result.

  Tried to change updates to not automatically updated, and then again on auto - no effect.
  Tried to go in safe mode and still couldn't do an update.
  Have run ccleaner and Tweaking.com Windows don't repair - no effect
  A ran a repair on Office 2010-no effect
  Have checked in that Crypto, BITS and Windows Update are all in automatic mode and Services are started.
  Have run the Fixit for update problems, - no effect.
  Running the program and got - Windows Update Standalone Installation Setup met with an error-0xc8000247
  Ran sfc/scannow and it brings just a search without search results window.

  Have noticed in the Event Viwer:
  In the Application logs:

  The Cryptographic Services service failed to initialize the catalog database. The ESENT error is:-583. ID 257.

  I also get a warning 1008 on:
  The Windows Search Service tries to remove the old catalog.

  and a 9000 error:
  The Windows Search Service cannot open the Jet property store.
  Details: The content index server cannot update or access information because of a database error.
  Stop and restart the search service.  If the problem persists, reset and recrawl the content index.  In some cases, it may be necessary to delete and recreate the content index.   (0x8004117f)
   
  and an error 1006:
  The Windows Search Service has not to create the search index creates. Internal error<4, 0x8004117f,="" failed="" to="" add="">
  C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Projects >.

  and warning 36:
  Research is unable to complete the indexing of your Outlook data. Indexing cannot continue to
  C:\Users\Bill\AppData\Local\Microsoft\Outlook\outlook.pst (error = 0 x 80304005). If this error persists,
  Contact Microsoft Support.

  And in the system logs:
  Error 7024
  The Windows Search service stopped with the special service 2147749155 (0x80040D23) error.

  Help. It makes me crazy!

  No probs.

  Though even this is not for your laptop, it has fast storage to Intel for chipset driver, it uses (ICH8M-E/M SATA AHCI Controller) you can see under the required System Configuration

  Here

  This is for XP 32/64 and Vista 32 / 64-bit. And Win7 32/64 bit

  It is version 10.1.2.1004. It may not be the latest version out at the mo. But his more later than the version installed

  You can either double-click SP52144, then follow what it says on the screen, then restart. Then see if WU works

  Or an extract SP51244 with something like 7-zip / winrar (select Extract to SP52144\). So, it extracts the files in folders.

  Then go to the entry SATA in DM. Go to the driver tab / driver update / browse computer / let me choose.

  Point to the folder that you extracted. Then the folder the folder drivers then the x 86. Since you are using 32-bit. And then click OK. It may show ICH8M-E/M (if it captures previous drivers / or if there is already an entry of controller for ICH8M-E/M). If you press ok / then following to load the drivers for it. Once he finished update the SATA drivers, restart

  Then see if windowsupdates works

  Looks like you need to .net framework 3.5 (or higher) for this. Don't think that you need this if you check out the file, and then add through the DM tho. If you double click on the file

• "Error 1719. Able to access the Windows Installer Service"when you install programs.

  After spending the last week every night trying to get some software installed (and of course the search for remedies in probably all available forums), I let go and post this request for assistance. But first my story:

  I have lived the last week suddenly my Neat Receipts software does not recognize my scanner more. Trying to reinstall the software, I came across the error that Windows Installer could not be started. That's when I started first for solutions. I was surprised how many solutions I found (but more redoubled practically the same thing), but none did it for me. At this point, I was always under the assumption that it is a problem of the Neat Receipts software.

  Then after another night of frustration I could not pass my trial version Office 2010 plus a sort of license error. I was a little surprised that the trial version which abruptly ended without giving me the opportunity to enter a license key (I got wrong), but doesn't bother too much because I liked the product and had noticed last week as well as Office 2010 is already officially released and I decided to buy it. After spending about $300 and a successful upload, I tried to install it.

  And here my saga continues. First I got the message that I couldn't upgrade my trial version and need to uninstall. Uninstall with the uninstaller routine does not work (windows error message install), but I could uninstall it using the Windows-Install-Clean-Up utility. Now, I can start the installation process, but after being nearly halfway through the installation, I again get the error of Windows install the Windows Installer Service cannot be accessed (Error 1719). It is roughly the same error that I got at the beginning, when I tried to reinstall the software, Neat receipts. So, it seems not to be a misapplication of Neat receipts or Office 2010, but a windows problem.

  The frustrating thing however is that after spending all hours searching online for solutions, the only thing I've discovered is that I am in good company (i.e. There are many others have reported the same problem), but none of the solutions work. Just to be safe, do not for get the same Advisor I tried already several times, let me enumerate what I've done so far:

  1. I am logged on as administrator

  2 - I started the Windows Installer service

  3 - I ran SCF /sannow (no problems found)

  4. I not saved and re-entered the msiecec with / opt and/regserver. I did so explicitly for BOTH (!) msiexec programs, one in the system32 folder and the one in the sysWOW64 folder

  5. I tried to repair Windows 7 boot from the windows 7 installation DVD and run the option repair (no problem found)

  6. I tried to pass the parameter registry WOW64 (for MSIServer) from 1 to 0 (I found this in one of the suggested solutions) [and later again back to the original value 1]

  7. I tried to 'force' windows to ignore the msiexec for 64 bit (in the system32 folder) by renaming and by identifying the msiexec for 32 bit 9 in the sysWOW64 folder) and update the path regsever C:\Windows\system32\msiexec.exe \V to C:\Windows\syswow64\msiexec.exe \V

  8 - I disabled my firewall and antivirus

  9 - I did everything above in many variations with reset (both the save option - reboot)

  -in fact, I could do things more I can't remember.

  Unfortunately a recovery is not an option most, because I guess I tried too many things and my view of the possible return is a point in which my computer was already in place...

  I tried to involve as well a representative of Microsoft support explaining my dilemma, but only made e-mail a generic response on this same forum (great customer service!).

  While I was actually pretty happy in the last 4 months with my new Windows7 (and thus Office2010), I am now reaching the point where I fell like throwing finally the towel and kiss goodbye to Microsoft. I was seriously considering to move to Apple before decide me in February favor some cheaper hardware to continue with Microsoft and the new Windows7. But this experience not being able to fix my computer after spending nights in the search for solutions and not be able to get support from Microsoft disgusts me.

  Now I wonder if there is someone out there who could help me out here...

  Of course, the .msi applies only to installers .msi, which was my mistake for which I apologize.  Regarding a clean installation, the fact remains that you have faced this anomaly for several days, a clean install, despite the pain, would be a distant memory now.  This is my personal opinion, not Microsoft, they me disavowed a long time ago, in all cases MVPS have nothing to do with Microsoft, although the price is published by Microsoft, it is awarded for the caregiver, or in this case try to help others.  It is good that I can at least allow you to vent, it's better out there that maintenus kept bottled upward, no matter how hard it seems to fix the problem, it will be resolved in your favor by subsequently, one way or the other.

  In pursuing the side of permissions of things you can try that if you wish.

  This example may or may not work for you, with your program?

  "It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to an administrator. Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER. At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and record as an administrator, you should be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disabling the account administrator for assistance:

  «net user administrator / active: No.»

  http://user.Services.OpenOffice.org/en/forum/viewtopic.php?f=15&t=11706#p55879

  See if this program you can tell what is happening with the failure of the Office to install.

  Process Monitor v2.8
  http://TechNet.Microsoft.com/en-AU/Sysinternals/bb896645.aspx

  Process monitor Forum
  http://Forum.sysinternals.com/forum_topics.asp?FID=19

  Need tutorial for Process Monitor
  http://Forum.sysinternals.com/forum_posts.asp?tid=13724

  If it was purchased through the Office Online web store?

  If so, you may need to return to this site at http://office.microsoft.com/en-us/products/ click on the link buy Microsoft Office 2010 today.   Then click on the buy now button to your product...  When you arrive on the "Items in your shopping cart" page, look for the link to the FAQ at the top of the page.  Click on FAQ.  When it opens do scroll to 'Customer Service '.

  Customer support

  What is your refund policy?

  Microsoft products purchased through the Office Online web store are eligible for return within 30 days of the purchase date. Taxes paid will be refunded on eligible returns.
  Among the exceptions to this return policy: Microsoft backup CD/DVD are not refundable and are not included in our 30 day guarantee.

  How can I request a refund?

  To obtain a refund for digital product please click here {web page link} to access your order history information. Click the Order Details of the order for which you want to request a refund. Use the option «back»

  When will be the reimbursement of the credit?

  Your refund credit will appear on your credit card within five to seven working days after we receive your letter filled with destruction. If a different payment method has been used, the duration can vary.

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• Windows 7 operation system__ 'service user profile Service has no connection. User profile cannot be loaded. » __

  Windows 7 operating system
  When you turn on the computer, I get the login screen normal showing my profile name and asking my password.  When you enter the password, I get:
  "User profile Service service has no connection.  User profile cannot be loaded. »
  Then the machine disconnects me and returns to the request for the password screen.  Unable to get beyond this point.

  This error can usually be fixed by following the steps below. All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  1 log on to a different user account with administrative privileges. If you neglected to make an account additional administrative steps 2-3. Otherwise, continue to step 4. See also General information on setting up the accounts of users at the end of this post.

  2 in Mode safe boot. This, by repeatedly pressing the F8 key as the computer starts. That you will get to the menu on the right where you can use your arrow key to select Mode safe [Enter]. The built-in Administrator account is disabled by default in Windows 7. However, if no other administrative accounts exist on the system it can be activated. If this is the case, you will see an icon for the administrator on the homescreen mode without failure. Login to the administrator.

  3 If you don't see the icon for the administrator mode safe account, then the built-in Administrator account is always disabled so you will need to work more. If you have a Windows 7 DVD installation (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  [Note: do not enter the brackets!]

  If you do not have an installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair the system Windows 7 (not a system recovery!) in the menu diagnosis. This menu of diagnosis is the same one where you can choose Safe Mode.  Or you can make a bootable DVD of Windows 7 repair of the file on this link:

  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. If you create the bootable DVD in an older operating system, you need third-party burning like Nero, Roxio or free ImgBurn software to burn the .iso image image file, not in the form of data. Windows 7 can burn the .isos natively.

  Now, remove the rescue DVD you made, restart windows system and log into the built-in Administrator account, you enabled.

  4. try a system restore to when things worked. If you can log in to your user account, you are finished. Otherwise, continue to step 5.

  5. the critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run Regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  Make the necessary changes, close Regedit and try to connect as this user.

  6. If that doesn't solve your profile, it is corrupt. When you do that, you should make a new Standard user account and copy your data to it. Do not delete the old account until you have recovered data you need!

  Once everything works, go to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Windows 7

  You absolutely don't want to have only one user account. Like XP, Vista and all the other modern operating systems, Windows 7 is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges in Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it can be more work you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• The user profile Service service has no logon. User profile cannot be loaded. Then I deleted my user profile in safe mode, and when I connected, all the files in C:\users\(old users name) are all gone

  I use Vista Home Premium

  1. Windows automatically updated and turn off the power.
  2. I couldn't connect, it says that the service user profile service does not logon. User profile cannot be loaded.
  3. Then I deleted my user profile in SafeMode by doing: 'make right click on computer - properties - settings - advanced - user - deleted my old account profile settings '. There is no option for me to "keep my files."
  4. Then I managed to connect, I guess having creates a default user account? Because there is a new folder in C:\Users\, called (former name). (old name) - PC. In C:\Users\(old name), it is empty.

  Now, all my original files are gone because I deleted my old user profile. The size of my c: drive-has not changed much, so I guess all my files are still in only my computer, it's just that I can't find their "PATH". How could I get re-navigate to all my files? I need them so badly.

  Thank you very much for the one who can help me.

  Hello

  Log on as ADMIN and look in C:\Users where C: is the drive where the user folders.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
  Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Husband can no longer connect computer. Message reads ' the user profile service has no logon. User profile cannot be loaded"

  How can I solve this problem? I have Windows Vista.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• my windows vista computer keep saying the user profile cannot be loaded.and I can not connect with my password. And I need a floppy disc or usb flashdrive.please free help to change password

  I can not connect and it says failed to connect to the profile.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile