Windows could not search for new updates. Errors found code 80073712

Similar Questions

• update of Windows, "Windows could not search for new updates", "mistake Found; WindowsUpdate_80080005 ".

  I try to run windows update and continue to receive the same message:

  "Windows could not search for new updates", "mistake Found; WindowsUpdate_80080005 ".

  When I try to display the windows Explorer update history shows only a white screen with an 'OK' button at the bottom right

  When I click 'OK' the screens of pointer, the computer works, but the screen remains blank until I have completed the task in the Task Manager.  I've updated from windows to the request automatically to the daily updates.  I get the same update for my Kodak printer, which is also a place for the wrong model.  This leads me to believe it was not working properly.

  any suggestions?

  I am running Kapersky "Antivirus 2009"

  OS: Windows Vista Home Basic

  My notes.

  0 x 80080005 implies that Microsoft Installer is not configured correctly or it may have malfunctioned.

  Run the Startup Repair tool by using the Windows Vista installation disc

  1. Insert the installation disc.
  Note: The computer must be configured to start from a CD or a DVD. For more information on the configuration of the computer to start from a CD or a DVD, see the documentation provided with your computer.

  2 restart the computer. To do this, click Start, click the arrow next to the lock button, and then click restart.
  Note: If you cannot restart the computer by using this method, use the power button to turn off the computer. Then, turn the computer back on.

  3. set your preferred language and then click Next.
  Note: In most cases, the Startup Repair process starts automatically, and you do not have to select in the System Recovery Options menu.

  4. click on repair your computer.

  5. in the System Recovery Options dialog box, click the operating system you want to repair, and then click Next.

  6. in the System Recovery Options menu, click Startup Repair to start the repair process.

  7. when the repair process is complete, click Finish.

  To run the Startup Repair tool if the computer has preinstalled recovery options

  Note: In most cases, the Startup Repair process starts automatically. Follow these steps only if the Startup Repair tool does not start automatically.

  8. remove all floppy disks, CDs and DVDs from the computer and restart the computer.

  9. follow one of these steps:

  (a) if the computer has a single operating system installed, press and hold the F8 key in restarting the computer. You must press the F8 key before the Windows logo appears. If the Windows logo appears, you must restart and try again.

  (b) if the computer has more than one operating system, use the arrow keys to select the operating system you want to repair. Then, press and hold F8.

  10. in the Advanced Startup Options, use the arrow keys to select repair your computerand press ENTER.

  11. click on a layout of keyboard in the list and then click Next.

  12. click on a user name in the list, enter the password and then click OK.

  13. in the System Recovery Options menu, click Startup Repair.

  14. when the repair process is completed, click Finish.

  TaurArian [MVP] 2005-2010 - Update Services

• Windows could not search for new updates-error code 80070422

  Windows could not search for new updates

  Error: code 80070422

  [Moved from the community centre of Participation]

  Hello

  Which Windows operating system work?

  Please refer to:

  http://Windows.Microsoft.com/en-in/Windows7/Windows-Update-error-80070422

• Windows could not search for new updates, error: 80070005, 80072F8F

  An erroe message appears when you try to download windows updates. I tried to use Microsoft difficulty It Center and it is said that repairs need to be made, it has been fixed, but the problem won't go away. Trying to submitt a request for assistance to Microsoft, but it is not available (?).  I was not able to download the updates of windows since 08/03/2012

  80072F8F

  Make sure that the date and including Internet Zone are correct on your computer.
  You may need to restart after the synchronization of time of your computer, etc..

  Windows Update error 80072f8f
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072F8F

  Error message when you search for updates in Windows Vista: "Windows could not search for new updates (Code 80072F8F)".
  http://support.Microsoft.com/kb/929458

  Error 80070005

  http://support.Microsoft.com/kb/968003/
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates). The other alternative is virus/malware.

• Windows could not search for new updates (error 800F080D)

  original title: Windows could not search for new updates

  Errors found: Code 800F080D.  Could be anti-virus software related as it seemed to stop working when I performed an anti-virus scan.

  HI gdm21,

  Since you have questions, even the installation of system update readiness tool. There may be a corruption of the system which causes this error and updates to fail.

  Just ensure that you have run through this repair tool: http://support.microsoft.com/kb/929833

  Do you get errors when you run this?

• Windows could not search for new updates (error code 80004002)

  Windows could not search for new updates and gives the error code "80004002" I tried to reinstall UpdateAgent (fatal error encountered) and I tried the MSFixIt and the automatic troubleshooter. Also tried everything to this forum and nothing helps: http://www.bleepingcomputer.com/forums/t/460975/windows-update-code-80004002/

  When I try the "sfc/scannow" it gives me that he can't sweep.

  I have looked everywhere and tried everything. Help me the microsoft community, you're my only hope.

  Hello

  Thank you for your update on the issue.

  Since you have already done SFC scan, I suggest you perform a repair installation (upgrade Inplace). There seems to be some corruption of system files and the repair facility should be able to fix them.

  Note: before proceeding with the installation of repair, I suggest you make a backup of all your data.

  Backup your files: http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  To perform a repair installation, follow the steps in the following article:

  How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2255099

  I hope this helps. Please post back your results for assistance.

• Windows could not search for new updates: Error Code 80080005

  I'm doing a search for new updates to make sure that I'm updating and it will not search for them.  Any help would be appreciated.

  I ended up reformatting my computer to solve the problem.

• Windows could not search for new updates error Code 80248015

  Have had this problem for almost 2 months.  Windows does not have this particular error code when I did a search on their Web site.

  Clear your Temp File/Cache first upward.

  http://winhelp2002.MVPs.org/delcache.htm>

  Click Start > all programs > Accessories > System Tools > Disk Cleanup

  http://www.WinHelp.us/index.php/Windows/enhancing-Windows-performance/free-up-disk-space-in-Windows.html>

  Better and easier to use - CCleaner.

  Download the basic build (slim) via

  http://www.CCleaner.com/download/builds.aspx>

  The basic build (slim) does not contain the toolbar disgusted

  Cleaning DO NOT USE ANY Advanced options. TOUCH NOT THE REGISTRY. At least not for now.

  Reset

  -=-

  Make sure the hour, the date/year & time zone are set correctly

  Don't forget to set a system restore point before doing any work on your computer.

  Rename the folder C:\Windows\SoftwareDistribution Windows Update

  That's what I got when searched around the error 0 x 80248015

  This problem may occur if the Windows Update, software distribution folder was damaged.

  We can refer to the following steps to rename this folder.

  Please note that the file will be re-created the next time we visit the Windows Update site.

  1. close all open windows.

  2. click on the "Start" button, click "All programs" and click on "Accessories".

  3. right click on "Command prompt" and click "run as Administrator".

  4. in the window "Administrator: command prompt", type " net stop WuAuServ" (without the quotes) and press ENTER.

  Note: Please, look at the cmd window and make sure that it is said that he was arrested with success until we try to rename the folder.

  5. click on the button 'Start' in the 'Search' box type " %windir%" (without the quotes) and press ENTER.

  6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

  7. right click on the folder, select "Rename" and type " Sdold " (without the quotes) to rename this folder.

  8. still in the window "Administrator: command prompt", type the command " net start WuAuServ" (without the quotes) in the opened window to restart the service Windows updates.

  Note: Please, look at the cmd window and make sure that it says it has successfully launched.

  Note: If the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  The windows update team and other users who regularly read the forum can share their knowledge or learn from your interaction with us.

  UTC/GMT is 20:58 Wednesday, June 13, 2012

• "Windows could not search for new updates" error Code 80041054

  Almost SIX months to find a solution to this problem.  Countless emails, phone calls, try this and try that.  I bought this laptop in May and was NEVER able to perform an update.  I tried everything I can think of and everything that has been proposed in e-mail from Microsoft.  I gave up any type of phone support - repeated "disconnection".  I can't reinstall Windows Vista because it came pre-installed.  I'm really just fed up.  I bought Office and Outlook - or work correctly.  I bought some software today (Roxio VHS to DVD) and I am unable to use it because it requires an update of Windows!  I did some research on this and found others with the same problem that dates back to 2007 - not answers on the Microsoft forums!

  Any ideas?  I tried Mr. Fix - it.  I downloaded the standalone installer - took about 45 minutes of so-called 'install' - and then nothing!  He never did any kind of scan and now I can't even find it on my computer.  I'm ready to make the leap to a Mac.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the correct help it.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows could not search for new updates, error 80070003

  I get the above opinion whenever I try to run Windows Update.I tried to run Microsoft Fix It, it says that it's been fixed, but not luck.

  Hello

  Method 1:

  I suggest to disable the anti-virus program and then try to install the update.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  If the problem persists, I suggest you to start the computer in a clean boot state and check if you are able to install the updates.

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Method 3:

  You can also try the steps mentioned in the link and check out them.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: When running chkdsk on the drive if bad sectors are found, all available on which data may be lost

  Hope this helps and keep us posted.

• Windows could not search for new update error code 80070002

  80070002 error code when you try to update windows

  Hello

  Try this and see hoew you go

  (1) go to the Start Menu.

  2) click on computer.

  (3) open the drive where windows is installed (usually drive C).

  (4) open the Windows folder.

  (5) go a little, and then find the folder C:\Windows\SoftwareDistribution (exactly like this).

  (6) open the download folder.

  (7) open the installation folder.

  (8) could be only one file there. Right click above and select 'run as administrator '.

  (9) after entering an administrator password, launch the installation, using the default values by clicking Yes to the license.

  (10) after the installation is completed (shouldn't take more than a few minutes), restart your computer (as a caution, although not necessary).

  (11) when the computer is restarted again, run Windows Update again. It should work normally. All fixed!

  Concerning

  GT4U

• Windows could not search for new updates - error Code 80070005, please can someone help?

  I get the message above for about 6 months, really since I tried to install updates including IE9, it went to the wall. It seems that the history of all my previous updates have the problem dissappeared also.

  I searched in different forums and tried several solutions but no evail, but some people do not seem to have been lucky enough to rectify the issue even if I do not deliver hope immediately.

  I am running Vista Home Premium on a Dell Inspiron 1720, but I don't have any software recovery to help me as far as I know that I'm running as the administrator should therefore not be permissions issues, but please also no matter what advice would be welcome.

  If everything fails to buy Vista or a version?

  Thank you for any assistance.

  Darren

  Hello
   
  Method 1:  Boot your system to the boot and install updates Windows in this mode. Try now to the KB article to perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.
   
  Method 2:  Disable the security software and then try to update Windows.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Please do not forget to turn it back on.
   
  Method 3: Run the system update tool.
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2:
  http://support.Microsoft.com/kb/947821
   
   

• My control panel says "Windows could not search for new updates" error 80244019

  Error is 80244019

  How can I fix Windows update

  Hi Michaelwalsh,

  Thanks for posting your query on the Microsoft Community.

  According to the description that you posted in your message appears that you are unable to install the updates and get 80244019 error code.

  Error code 80244019 indicates a virus infection that has disabled Windows Update, or another service on your computer that is required by Windows Update. Since you've already scanned your computer, your computer cannot be infected by a virus more, now, it is recommended to make sure that all the important services responsible for updates of Windows are enabled.

  Follow the steps below to restart services required by Windows Update

  You must be logged on as administrator to perform these steps.

  1. Open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. In the Services window, double-click in the Background Intelligent Transfer Service (BITS)
  4. Under the tab general , under Startup type, click Manual, and then click apply.
  5. Click the encryption tab, and make sure that the service is enabled in every hardware profile listed.
  6. Click the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  7. Click the connection tab and make sure that the service is enabled in every hardware profile listed.
  8. Click the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  9. In the Services window, double-click Windows event log.
  10. Under the tab general , next to Startup type, make sure that Automatic is selected.
  11. Next to Service status, check whether the service is started. If not, click Start, and then click OK.
  12. In the Services window, double-click the Windows Update service.
  13. Under the tab general , next to Startup type, make sure that Automatic is selected.
  14. Next to Service status, check to see if the road is listed. If not, click Start, and then click OK.
  15. In the Services window, double-click software licensing.
  16. Under the tab general , next to Startup type, make sure that Automatic is selected.
  17. Next to Service status, check to see if the road is listed. If this is not the case, click Start , and then click OK.
  18. Close the Services window and try to install Windows updates again.

  Hope it would help. If the problem persists post returns with the required information, the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Windows Update will not install - Windows could not search for new updates to Code 8007051 A

  original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

  Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

  ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

  "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

  Some research has indicated that it was due to a problem of update?

  Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

  The "get help" link was as useless as an ashtray on a motorbike.

  Any help would be greatly appreciated

  Hi Discopossum,

   

  How long have you encountered this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 3:  Clean boot the computer and then try to install ITunes

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If problems with iTunes didn't exist yet, contact the Apple Support
  http://www.Apple.com/support/iTunes/

• Windows could not search for new updates. Error 8024402f code. Fix available?

  Windows could not search for new updates. Found error 8024402f code. I tried everything, but the problem has not been resolved.  Vista service pack 2 build 6002. is any kind of fix available? I tried the fixit. It shows the Update component must be repaired and there is no problem, but in fact it is not the problem. Updates have been arrested?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  If the fixit doesn't do the trick, you will need to manually go through the troubleshooting utility.

• Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.