Windows Defender does not: whenever I have try to turn it on I get an error message informing me then Defender is stopped
Hi I am a newbie for windows 7 and a kind of desire, I was still with windows xp! It is simpler and much easier to use "I tried to start Windows defender (which I am informed is included in my Vista) but every time I try to turn it on I get an error message informing me then Defender is stopped, but if I restart my computer it automatically lights Defender..." but this does not happen, I use Mcafee site advisor "could you please tell me if there is any chance that's causing the problem?"
Hey JoanneWatson,
Tags: Windows
Similar Questions
-
My pc is too slow and sometimes crashes.
Hello
I suggest you to perform a system restore to restore the computer to an earlier point in time before the problem started.
See these articles for help:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questionsKind regards
Afzal Taher
Microsoft technical support engineer -
Issue of Windows install
I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?
Thank you, Jeanne Vecere
You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.
IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.
-
How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.
Hi PAtwoodwu,
1. what program are you trying to install?
2. did you of recent changes on the computer?
3 does happen with all programs?
Check and make sure that the Windows service install is running on the computer.
(a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.
(b) right click on the Windows Installer service and then click Properties.
(c) if the box Startup type is set to Disabled, change it to Manual.
(d) click on OK to close the Properties window.
(e) right click on the Windows Installer service and then click Start. The service should start without errors.
(f) click on the file menu, and then click exit.
-
I have a MacBook Air, the BONES of yosemite, the Photoshop 12.0. Adobe Updater tells me that I have an update available (12.0.4). Whenever I try to download the update, I get the error message: "there was an error downloading this update. Quit and try again later. "I tried several times without success. What can I do to install the update? Thank you!
Help > Update function no longer works. You will need to go to updates and download updates for your version and Psalm
I'll help you get started with the CS5 update. Adobe - Photoshop: for Macintosh: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5
Gene
-
Whenever I try to load a program I get an error message
Whenever I try to load a program I get an error message / is not a valid bencoding, how can I stop this
original title: cannot load programs.Hello
- What is the name of the programs/Applications you are trying to install?
- Is the issue limited to a particular application or occurs with any application you are trying to install?
- What the exact error / message code you receive while trying to load?
- What antivirus do you use?
- You did it all changes to the computer before this problem?
Method 1: Resolution of problems running the program:
Open the troubleshoot program compatibility utility
http://Windows.Microsoft.com/en-AU/Windows7/open-the-program-compatibility-Troubleshooter
Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
Method 2: Click the link below to provide newspapers:
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Reference:
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
It will be useful.
-
I have a problem, try to uninstall the ask toolbar. get the error message: unable to access the VB script... need help
Hello
How do you try to uninstall the toolbar?
I would suggest trying the following methods and check if it helps.
Method 1:
Try the steps in the following Microsoft article and check if it helps.
How to fix script errors in Internet Explorer on Windows computers:
http://support.Microsoft.com/kb/308260
Correction of errors in Internet Explorer: http://support.microsoft.com/kb/822521
Method 2:
Try to uninstall the toolbar, programs and features and check if it helps.
Uninstall or change a program:
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Hope the information is useful.
-
original title: PSHED.dll
Whenever I try to charge my laptop I get an error message saying: file: PSHED.dll status: 0xc0000098 Info: windows failed to load because a required file is missing or corrupt. and I lost my original disc to repair.
I believe that this has happened after I tried to update my windows update system.Hello
You can run file system analysis checker and see if the problem still persists.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
original title: Security Center
I had a virus to infect my computer but I'm to remove by doing the scans. I can't solve the problem of after-sales service. "" My Windows J.4 Center repair center is currently disabled but when I try to turn it on I get the error "cannot be turned on.
Hello Barbaram1,
Use the Windows key + R on the keyboard or click on start, select run.
In the run box, type services.msc
Click OK.Make sure that the Security Center service is enabled and started.
Probably, you will need to click Start to start the service.
The Startup Type should be automatic. The status should be started.Let me know what happens. If the problem persists, it may be that there are residual questions of the malware infection.
Councillor of State & progress.
Maurice Naggar ~ MS - MVP
-
I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error
Hello
This link may help: the application failed to start properly (0xc0000022).-Microsoft Community
Kind regards
Sheena
-
I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?
Also, where can I find a list of compatible printers?
I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?
Also, where can I find a list of compatible printers?
Hello
You can use the Windows 8 Compatibility Center to find out if a device is compatible.
Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/homeFAQ - Windows Compatibility Center:
http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ
Concerning
-
After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!
Hello
Please see the help document for troubleshooting with the installation logs: https://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
Let us know if this helps!
-
I just downloaded and installed the Lightroom update version (5.7). When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b). It happened the last time I upgraded and sent me a few files that has corrected the problem. Can help you. With our thanks. John
-
can anuone tell me how to reinstall a file called snmaster.idx. Whenever I try to connect to AOL, I get an error message indicating that the file is missing.
Thank you
FPVHello
Visit this help link on AOL:
You may receive the message "the file snmaster.idx is missing" during the installation of the AOL® software if some data
the files are not installed in the correct location. Move these files to the correct location, this problem will be solved.
http://help.channels.AOL.com/KJump.adp?articleid=223420I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
access denied for the creation of a directory
When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied." How can I fix this?When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied." How can I fix this?
Only when you try to install this application?
What about BullZIP PDF Printer?
(You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.)
Maybe you are looking for
-
A discrete video card selection guide
Hello.. I need to know if the graphics card "card Asus STrix-GTX960-DC20C-4GD5-Graphic" is properly suited to my system "HP Pavilion 500-222ix" with Memphis S micro-atx motherboard. It's a video card double slot and I do not know he'll go nice and ea
-
Is there an easy way to get a Date/time string seconds?
I have 2 strings of the format depending on whether I would like to convert in seconds (since 1900). I need this value to set the t0 in a field. Date: ' 30/06/2014 '. "Time: '16:06 ' 08." Is there a CVI function that will do this conversion for me? I
-
When starting computer XP, get error about NHSM
Recently, when I turn on my computer, there a NHSM message error, what should I do about it? * original title - what is nhsm? *
-
Constant errors on Windows live mail Windows 7
Can't send or receive messages on behalf of Hotmail.co (email address). Server error: 0 x 80048849Server: 'https://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.Windows Live Mail error ID: 0 x 80048849 I have 6 on Windows Live Mail e-mail addre
-
Hello worldI'm new to vmware, I have a standard switch and,.I have to add a vlan. I have 4 esxi hosts in a cluster.I have connected to the vsphere client. I clicked on one of the host (say host1) configuration - networking - add network-connection ty