Windows Defender is not currently enabled in windows vista starter

Similar Questions

• Error E0BB0147: the "Volume Snap" operation is not currently enabled for this Volume

  Hello!

  Since an update of my Windows XP at the end of 2011, I have problems on my HD using Ghost 14.0 backup. I get the following error message:

  -Impossible to create an image of the selected disk virtual volume.

  -E0BB0147 error: "Volume Snap" operation is not currently enabled for this Volume.

  What should I do to fix this?

  Thanking in advance for your help,.

  tico776

  Hello

  I suggest you to see link and check if it helps:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

   

  Error: "error E0BB0147: the 'Snap Volume' operation is not currently enabled for this Volume" when creating a backup using Norton Ghost 14.0

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080929121249EN&product=home&version=1&PVID=f-home

• sound does not play when windows vista starts or stop

  sound does not play when windows vista starts or stop

  Hello

  • When the issue started?
  • Will there be any changes made prior to this issue?
  • Otherwise, the sound works well?

  Step 1: Refer to "the startup sound is not played correctly when you start Windows XP or Windows Vista
  ' http://support.microsoft.com/kb/321735 '.

  Step 2: To change the sound on closing down.

  Audio a.Open and Sound themes by clicking the Start button, clicking Control Panel, hardware and sound, and then clicking sound.

  b. the sounds tab and then, in the list programs, select the event you want to change the sound.

  c.Under sounds, click the sound you want to associate with the event. If the sound you want to use is not listed, click Browse to locate it.

  'Change the sounds of the computer '.
  ": http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds "

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to stop disk check to run every time that windows vista starts?

  How to stop disk check to run every time that windows vista starts? I had a problem with one of my backup disks so I removed it, but now the drive is still running a disk check whenever I boot my system. It takes so long to run and there is no error, but it starts every time. Why and how can I make sure that she? I read similar questions, but they don't tell you how to run a disk check, they mention however that "If you want to cancel the regular disk for some reason check, check out this guide." but tell you what guide or link?

  Hello

  This tells you how to enable and disable it:

  How to difficulty Chkdsk will not run at startup in Vista
  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  Video: Stop Check Disk from constantly running at startup in Windows Vista
  http://blogs.TechRepublic.com.com/itdojo/?p=193

  ChkDsk runs every time Windows starts.
  http://www.WinVistaClub.com/T20.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• After Windows Vista starts in a minute, or sometimes less my office goes from his normal self in a white pagecould someone please help me get back to my office?

  I tried to restart my computer, but only to get the same result, I tried to backup and resture but my computer tells me always that it is restureing the computer already. If someone can help or has had the same promblem I would like to know what I could do?

  Thank you

  Dave.

  Hello

  • You receive an error message?

  You can view these methods:

  Method 1:

  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.

   
  Step A.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  Method 2:
  You can always follow performance issues in Event Viewer that all error codes are followed here.

  Reference:

  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

• Genuine key of Windows Vista Starter DVD already used after formatting PC!

  I have a real DVD of Windows Vista Starter. It has been activated and worked very well. But after a few PC, formatting and reinstalling, it says key already used and I'll have a temporary profile with features in need!

  My copy is authentic and I have the key, but it fails to activate! ???

  Hello

  Take the option phone, skip the automatic steps, and brace yourself for a real person explain to the.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  1. open the Start Menu.

  2 in the white line (search) box, type slui.exe 4 and press enter.

  3 select your nearest store and click the Next button. (See screenshot below)

  

  4 click on continue in the UAC prompt.

  5 a local phone number should apear with a set of numbers generated by Windows and displayed on your screen under step 2: . (See screenshot below)
  NOTE: It will be a series of numbers within the 1 to 9. I just removed here for obvious reasons.

  6 call the phone number of activation chosen.

  etc etc.

  See you soon.

• code 80070002 error appears during the update of windows vista starter

  During windows vista starter updated operating system, the 80070002 error code appears on the screen and could not update and install something. How to solve the problem? Product key-33qmg-pb76m-kbpwd-mbqd3-k6ggk

  Sylvie chandrasantra,

  80070002

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.

  http://support.Microsoft.com/kb/956698>

  05/14 / 1104:51: 22 am

• I need a product key, I lost my Windows Vista Starter pack

  I need a product key, I lost my Windows Vista Starter pack with HCL laptop with the product id 89571-OEM-7332204-00608

  If you reinstall using the manufacturer's recovery media, you should not have a key for Windows

  If you try ot turn on Office applications, you must purchase a license.

  Your own product key for Windows is on the COA sticker on the case of the machine - or possibly inside the battery compartment.

• When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?

  Original title: Msimbz32.dll

  Hello

  When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?
  Best wishes
  Hassan

  Hello
  Try the methods provided below and check if the problem persists.

  Method 1:

  Msimg32.dllis a file system in Windows Vista

  If you get the message when you open any program or when you start suggests that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Perform the clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 of the above article.

• Windows Vista starts only with the loading screen

  Original title: Problem with Vista Business

  I have a pc with vista professional in this regard, there is a problem with the windows and it does not start, just on the loading screen. The machine came with a disc of recovery for xp only. I'm trying to find a download of Vista business so I can fix it rather than having to restore to XP. Anyone know where I can download it?

  Hello RussellNolan,

  It may be possible to solve this problem without having to reinstall the operating system.

  What exactly happens when you try to start normally?

  Let's start with the safe boot mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works, we can try to boot minimum troubleshooting:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps out.

  Best regards

  Matthew_Ha

• my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

  my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

  It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now
  and I need my computer quite urgent for the University.
  Thank you very much!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• cannot check the updates on my windows vista starter error code 8024402F keep on showing if I tried

  my window vista Starter is set to automatic windows update as well as my defender.it windows runs smoothly before until I uninstall my previous antivirus for microsoft security essentials, did I made the wrong move by replacing anti virus?

  riza castillo,

  See the following topic for your question

  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa >

  http://support.Microsoft.com/kb/836941>

  06/15 / 1111:55: 13 pm

• On startup, I get a "error 0xc00000e9 saying that windows/system32/config/system is missing or damaged, but sometimes after several tests, windows vista starts finally."

  My pc has even sent to ASUS and they said they had set, but within months, he started the error again. I even had a computer programmer look at the and reinstalling everything, but still the error comes and lately, it happens every time you start :(

  Hello

  I suggest you to follow these steps and check if that helps.
  Method 1:
  Try to start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Windows vista starts up on my dell inspiron 530 s.

  Windows vista starts up on my dell inspiron 530 s.  When I turn on my computer, I get a bootmng lack of press ctrl alt del to resart message.  When I put my vista disk in my cdrom and resart it only tells my no detected bootdevice.  help!!!!!!!!!!!!!!!!!!!!!!!

  Hello

  Try to use this information from Dell, including the F12 Diagnostics.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

  See you soon.

• Windows Vista starts with an empty office

  original title: when I turn on my DELL PC with VISTA I have no images desktop taskbar icon, none of this show is a program window, but it's a pain. Can it be fixed or that THX

  What huh?

  Hello

  What of the 'safe mode' - did you try to run? Here's how:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  and in safe mode, if it is possible, you can run "System Restore":

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Choose the date , when the PC worked OK.

  LC