Fan on Qosmio G30 speed

Similar Questions

• Advantages disadvantages & RAID and how to assign Qosmio G30 speed

  Hello.

  I heard that the RAID configuration can increase or not the speed... If someone more expert can explain to me how it works?

  1.) first of all what is RAID (explain in words that an ignorant in the calculation as I can uderstand)

  (2.) what is the difference between raid 0 or raid 1 and how it affects the computer?

  (3.) what are the advantages/disadvantages to choose between this two settings?

  Hello

  I m not a guru RAID ;) but I used Qosmio G20 with and without a permit to RAID technology and I have not noticed the disadvantages of speed.

  I see that you are a beginner and so I will try to explain the RAID feature very easily ;)
  What is RAID? RAID (Redundant Array of Independent Disks) allows to save data.

  The RAID reflected the content of the first HARD drive to the second HARD drive. This means that all the files (depending on the RAID settings) that are stored on the HDD1 is also stored on HDD2. If the HDD1 will damage, you will be able to recover everything from the HDD2 unit.

  The two s of HARD drive can be used with mirror RAID-1 or RAID-0 stripping
  When you use RAID-1, data is stored twice (once on each of the hard disks) so if there are problems with one of the hard drives, the other HARD disk can be used to retrieve the data.
  But you can use only two hard drives as a single HARD drive. (2 disks hard = 1 HDD)

  When you use RAID 0 (stripping) met by the operating system size is two times more!
  Using RAID-0 configuration, all data on both disks will be lost, even if only one of the two disks fails!

  I think that the RAID is very useful because it safes the contents of HARD drive!
  Of course, if you use the mirroring option, you can only use the a HDD available!
  But you are on the site course ;)

• Qosmio G30 - fan was blasting and evil

  Yesterday when I got home I started my Qosmio G30 and I think that the fan was blasting and struggling to be honest, although I only realize that afrer do some reading this morning. In any case, I have used the PC for about an hour and then left running with 1 application running while I went out.

  Back a few hours later, the laptop didn't stop it yourself, but there are two generic boxes that had arisen indicating to stop the laptop and return it for service.

  By the sounds of it the fan had stopped working together and the computer has been deadly quiet. I restarted and still once the fan wasn't working at all, and even if the laptop loaded in windows, I immediately stopped him again.

  I am afraid that the laptop has not closed itself down when the fan is not, and if she has not done this, any damage likely to be caused, even if he did load in windows?

  Looks like fans have a great generation to the top of the dust or the fan has failed.

  Send the laptop to an ASP, they can check the fans and remove dust for you.

• Screen on Qosmio G30-153 froze playing a game

  I got my new laptop for a little over 7 weeks now and it crashed. While playing a game (Need for speed most wanted) the frozen screen and the only way I could turn off the laptop was by disconnecting the battery.

  After that, every time that you start the machine, the fan comes on but nothing happens. I took the laptop back to the officer and said that the motherboard must be replaced.

  Apparently, the machine will work with an external monitor. Any reason, why this happened and this never occurred before on these models?

  When you start the laptop have you tried to switch to the screen of laptop using FN + F5 key combination?

  Use the Qosmio G30 for about 3 months and never noticed anything similar to play different games.

• Qosmio G30 - SSD drives are not recognized

  I have a Toshiba Qosmio G30-140 with two hard drives.
  One with Windows 7 and the other with XP.
  The system allows to start the 1st or the 2nd.

  To speed up the system got two Samsung 830 Series SSD drives
  model: MZ - 7PC256.
  The BIOS (BIOS ACPI version = 3.90), do not have the option and I have AHCI, I adopted
  1RAID-0.
  In this option, the discs to work independently.
  They work well, but the "Samsung SSD magician" application, does not recognize
  No SSD.

  I'm afraid that you do not work in the best conditions and which could have
  best performance.
  Thank you for helping understand me what isn't here and can improve the performance of SSDS magician.
  Thank you

  Hello

  I don t use this software Samsung SSD magician, but some people in the net reported that there is a new version of this utility in addition many people have problems using this software and this issue seems to depend on laptop but possible on the SSD drive.

  As much as I know there are other tools like Driver Magician or SSD Tweaker that perform similar functions as magician Samsung SSD

• Update hardware and software Qosmio G30-198 for hight performance

  Hello

  I have a Qosmio G30-198.

  I have to use Autodesk Civil 3D program in the laptop.
  This is a CAD program that requires a lot of ram and a transmission of data high-speed HARD drive.
  To do this, it is absolutely necessary to update hardware and software for civil use with good performance.

  I need to buy and install HDD SSD, install more RAM (which is the maximum allowed in this computer?) and I need to install Win 7 Professional 64 bit.

  Please,

  If anyone can tell me how I can further improve the performance of the laptop, please tell me.
  I don't know what steps I need to keep.

  Can you help me?

  Thank you very much.

  Hello

  The RAM can be expanded up to 4 GB
  As far as I know this laptop supports the Intel® 945 PM Express chipset and supports this chipset may 4 GB of RAM
  http://Ark.Intel.com/products/chipsets/22817

  The HDD or SSD drive update shouldn't be a big problem.
  Usually the built in SATA controller should be able to manage the common SATA SSDS

• Qosmio G30-126 (PQG32E) - very slow performance of HARD drive

  I have improved my Qosmio G30 126 at 4 GB of Ram, SSD 64 HDD as windows7 boot partition and 500 GB 7200 64cache HARD drive as drive HARD secondary but I have a very slow HARD drive performance when working in windows7, but when I work on a virtual machine Windows XP, the disk HARD perforemance is fine.

  I've upgraded all drivers from toshiba.com for windows7 ultimate 32-bit drivers including drivers from the chipset intel but my problem is not solved. I also check all other performance issues and its OK.

  The same problem exsists on my old HARD drive on Windows Vista Ultimate 32-bit and Windows 7 ultimate 32 bit.

  I used HD tune software to check my HARD drive it accelerates gives about 100bps in windows 7 for my SSD and it gives 285mbps (this is the actual read speed) in the machine virtual Windows XP and the actual speed is significantly different.

  Please tell me what to do because I suffer from my laptop very slow and spend a lot of mony on it without more.

  Hello

  To be honest it is really hard to tell why you have slow HARD drive performance but especially it s associated with a large number of programs they are running in the background. How many processes are started after Windows starts?

  Also, the antivirus program may affect the performance of the computer. I would recommend using the AntiVir freeware tool and the Windows Firewall. That's enough if keep you Windows up-to-date and use a new Internet browser.

  Also check the other discussions of the forum on the slow performance. You can find a lot of useful tips to improve performance. For example:
  -Defragment HARD drive
  -Disable the startup programs you don't need
  -Uninstall unnecessary programs
  -Run the CCleaner tool to remove old registry keys

• Qosmio G30-204 - the CPU temperature is high

  OK, so I have a problem of overheating with Qosmio G30-204. It seems that in the course of suspend the CPU temperature is high, I used SpeedFan to confirm this. EG + 70 degrees C after 5 minutes. 90 + degrees if left any longer!

  I find it very frustrating to say the least. This unit has served sentence. I had not yet touched in nearly two years the initial feeding has stopped working. The original power box split as it was a serious risk to my health and still less damage would could have been done to the machine! How to create a product that at least that I've updated the BIOS Toshiba fry the GPU!

  Needless to say that I did pretty well as soon as I got the camera. What can be done to fix this problem? If anything like that? It makes me not want / trust buy another Toshiba product.

  I can't wait to hear support ;)

  Hey,.

  In your case I don't he say s a nuisance Toshiba. It can be another problem as Akuma written and this means that it has nothing to do with Toshiba.

  For me it s definitely dust in the heat sink, especially if you do not clean your laptop before. You must use the jet of compressed air to blow the dust from the cooling fans. It only takes 5 minutes and should be made from time to time because it s normal behavior which, after a certain time dust, blocking the cooling fan.

  Check this box!

• Upgrade HDD/SSD on Qosmio G30-126

  I'm trying to decide if I should upgrade existing at a larger size HARD drive or just a large and an SSD.

  Question 1: what is the size for the two new HARD drives because the power supply is limited?
  Question2: For now, I run the two HARD a disc, so no RAID. Is it possible that I can determine what is on which drive? I do not envy the dumping everything on a drive connected and then import the new HARD disk.
  Question3: Is there a substantial improvement in speed when using the SSD as a HARD drive? I run W7 professional and compared to Mint example startup is pathetically slow.

  Appreciate answers or suggestions.

  Hello

  Qosmio G30 already supports SATA interface and so general, interface SATA has no capacity limit. If you can install a SATA 2.5 HARD drive with all the sizes. Ore of 500 GB drives is no problem on SATA interface so it s on applications and data based on what size you want / need.

  If your laptop is capable of managing 2 hard/SSD drives, you can buy an SSD 128GB for example for Windows and your applications and a HDD (500 GB) for your data.

  Disc SSD is faster than hard drives, but they are more expensive. SSD are perfect for the OS itself and programs but for data such as photos, music, etc. Hard drives are fast enough.

• Qosmio G30-102 - can I install RAM DDR2 - 667 Kingston rather RAM DDR2-533?

  Hello

  I have a Qosmio G30 102 and I wanted to spend my RAM to a total of 4 GB (currently I have 2 GB installed with specifications of a PC2 - 4300 DDR2 (533 MHz)). So I searched for RAM, and I wanted to know it would be possible for me to install.

  * Kingston Technology - memory 2 GB PC2 5300 667 MHz 200pin SODIMM DDR2 *. Would it work properly and if so it would be better than doing a (* 1 GB) memory PC2 - 4300 DDR2 (533 MHz) * the standard RAM installed on my Qosmio?

  Thanks in advance for the answers of th

  MB

  Hello!

  To upgrade RAM on my laptop, I used Kingston DDR2-667, and it works without any problems! :)

  Thus, you can use this module Kingston too but I guess that it runs only on due speed 533 MHz FSB of the processor limitation. You can check with a tool of information material such as Everest or PC Wizard 2008 for example the speed of the FSB.

  As far as I know, the laptop can be upgraded to 4 GB maximum RAM.

  Good bye

• Qosmio G30 and intel SSD - Windows 7

  Hi, I'm new to the forum

  I have a Qosmio G30 with Windows 7 32 bit - model G30 140 31F
  I bought an SSD intel 160 GB because of the promissed 250 MB/sg reading speed, because I need for video editing.
  I tried in Win Xp and now Windows 7 and it gets up to 120 MB/Sg

  I guess it s because of the drivers but I instal the drivers of storage can´t intel matrix any version of it. I tried a lot of them and with the compatibility mode too. It gives me an error saying I have not the minimum requirement.

  I have 4 GB of RAM and 2.0 Gzs centrino duo.
  I have install intel ssd toolbox and it does not recognize the intel SSD drive as a drive intel to improve the speed and other things.

  Please help me to get my speed in the car because it has to be and to have the TRIM option enable in order to have the life of my unit any longer.
  I also have the latest firmware in the drive.

  Thank you in advance.

  DANI

  PD: It coul be, perhaps, if our computer is a sata 150 controller in place a 300 sata controller? I don't know if the control is one of them in any case.

  Post edited by: Gazpachete

  Hi Gazpachete,

  I put t know how you managed now installing Windows, but Qosmio G30 is equipped with a SATA150 interface... This means that you will never get the 250 MB/s read speed of the HARD drive. You will get a maximum speed of 150 MB/s theoretically, but in most cases it of also a little slower.

  How did you check the current speed?
  But 120 MB/s is a good speed. You should be satisfied and it s faster than each computer portable HARD drive. ;)

• Qosmio G30 - DVD-ROM drive has stopped working

  I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

  He still pulls in, but it will not read or burn discs.

  I received a quote of £360 Toshiba to adapt to a new one that seems generous.

  Anyone know where I could get it fixed cheaper than you?
  Or better yet... anyone know where I can I get it fixed?

  David Hutchinson

  Hello
  This is not an answer to your question but can solve the problem if it is the same that I had.
  In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
  The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
  motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
  The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

  Where there is a similar issue, I hope that solve you it like I did.

• Qosmio G30-116: TV button - where is it?

  Hello everyone.
  I would like to ask questions about the (Tv) button in the qosmio G30-116. Do not I have it on my blue (AV) button on the keyboard.
  I tried to play station 2 on the G30-116 but it doesn't work unless through media center which is really slow and bad.

  My friend has a G20, he bought from the United States, and it has a button "Tv in" and when it connects (play station2) through D-video or video, simply press that button, then there a live inistent Tv that is faster than the media library.
  As far as I know because in media center, the game will be very slow?

  G30 suppouse to be better than the G20. Why there is no Tv-in button? Where we can press on and play or watch the sky or anything like that, speed of the media center boring?

  Why should I use media center to play (play station) while G20 users WHOSE!
  I contacted toshiba and they said your are going to ring me tomorrow or the day after, but if I found that this Tv-in support dosen't G30 series!

  Could someone correct me if I'm wrong please, this question is open for all the qosmio but especially for those with the G30.

  Thanks to you all
  Naïve

  Hello

  I think you're wrong.
  I put t found information about the Qosmio G30-116, but on the Qosmio G30-134.
  But I guess that these two units are similar.
  Check your user manual that was preinstalled on your laptop.

  However, the Qosmio supports the monitor button. This is the second on the right.
  The Qosmio player should start. There, you can choose between TV mode, CD or DVD. I think you need the TV mode.
  You should also check your right connection. I suppose that you use the right cable and the composite port (monitor of).

• Qosmio G30 freezes at startup of Norton Internet Security 2008

  Norton Internet Security 2008 will freeze my computer because soon, it attempts to load and the only way to do is to restart the system by pressing the on/off key.

  My laptop is a Toshiba Qosmio G30-177 (model No. PQG32E-02G022GR) with Vista Ultimate and pre-installed NIS2007. I have no problem with this NIS2008 version on my other laptop (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
  NIS2007 works well on my G30 and I have no problems at all, but more recent versions of NIS seem to be in conflict with my system:

  1. I am able to install and run the new version, download all updates and adjusting the settings. Maybe, a couple days later my computer freezes after start in exactly when the NIS tray icon appears. For a few seconds there is simply no response of the system at all and the LED of my laptop show that any HD activity has ceased. After having been inactive during those seconds, the cooling fan will start to operate at maximum power, creating a huge noise that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs. Force a reboot, that's all I can do.

  2. now, this time, I rebooted my laptop successfully even once (took a few attempts) and it all of a sudden not freeze. Then I disabled the firewall and auto-protect at all times, so there was no freezing at startup and I just had to enable both the firewall and auto-protect after start manually. In order to avoid the gel again after the reboot, I always disabled NIS before shutdown. For one or two days of workaround has been quite successful.

  3. all of a sudden, after one or two days, this work around will become useless, because the system begins to freeze again at the time of the icon is displayed. In this case, restart has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent form from NIS to ccApp.exe run automatically at startup (administrative tools > system configuration > "Startup" tab). It's successful and my laptop is able to start normally, but if later I try to start NIS manually, it will freeze again.

  I had this problem since NIS2008 just came out, so I thought that at the same time an update Windows or Norton may have solved the problem, but this weekend I gave another NIS2008 trying without success. I'm pretty sure that the problem is not caused by other software than Windows or Norton, because I also tried to install NIS after a full system recovery, so I've only preinstalled NIS2007 and Vista on my laptop. I use Norton removal tool and follow the instructions to uninstall before attempting to install the new version of course.
  My last hope was that the version of NIS2009beta somehow would not freeze my system, but it does. It does not matter if I try to start 2008 or version 2009beta, the problem is exactly the same.

  What really motivates me almost crazy is the fact that NIS works perfectly for a while, then needs enough small workaround, and then after some time completely refuses to work. In these two days I do not change system settings, install or uninstall programs or doing whatever it is that I felt might conflict with NIS...
  So far, I have no idea of the solution and have again use NIS2007.

  Someone knows how to fix this?

  Hello

  To be honest I don t use the Norton internet security because it slows down the performance of the laptop and he needs too many resources.
  I used the NIS06 and after several months of use I removed it from my system for the reasons mentioned above.

  I put really know what might be a problem with your Norton Internet Security but I guess its associated software question maybe there are a few compatibility issues with vista and NIS08. Who knows...

  In my opinion, you should first check the Symantec Web site for more details.
  Maybe these questions are mentioned somewhere in the FAQ section and maybe some updates or patches are available.

  Good bye

• Qosmio G30 gel mode failure & installation

  Hello
  My Qosmio G30 (Vista Ultimate installed) freezes during startup. In safe mode, it hangs on crcdisk.sys. I tried recovery from Vista DVD but still it crashes just after loading files when it shows the progress bar for the Microsoft Corporation bellows. Similar scenario occurs when I try original recovery DVD (Windows MCE).
  It is interesting that little noise (I guess that fan) begins a few seconds after freezing (in all scenarios). I tried a few hours waiting, but nothing happens. BIOS diagnostics to show that everything is OK.
  I would appreciate any suggestion so that I don't have to take the laptop to the service.

  Davor

  Hello

  looks like a hardware problem. Already tried a different memory modules? Would be a good idea. Otherwise, I suggest you contact a local servicepartner and bring your machine here, I guess theres nothing you can by yourself.

  Here´s a link to an index of ASP to find nearest service center in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  See you soon