Windows does not correctly - open cursor freezes and gets to abnormal termination

Similar Questions

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes

• "Windows Vista Security Center" close browser windows, precise I have a virus, and now no programs will be opened. Windows does not start in safe mode, and all the system restore points have already disappeared.

  Hello

  I have a Dell laptop under Windows Vista Premium. I got it for about three years, and he is upset enough ok tonight. In the middle of browsing the internet, check my email, etc., all but one of my browser windows close at random, and a message appears "windows vista Security Center" whenever I try to open a new window, blocking of the site and to say that the site is dangerous and my system has been infiltrated by a Trojan horse. Then he starts the scan and says that I must buy the full to get everything to work again. I closed everything, since I already have McAfee antivirus and internet security, but it does not, and neither did any other progams. I tried restarting in safe mode to restore a backup point, but Windows does not open in safe mode, rather stick for half an hour in the middle of loading. When I managed to start windows in normal mode, I found that all my past restore points had been erased.

  This happened to someone else, and it is fixable without wiping everything?

  Thanks in advance,
  Emma

  Hi Emma,

  This could be due to a virus on your computer.  Try to make a virus on your computer scan to check if your computer is infected.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot start Windows does not correctly

  I booted windows xp and when he started an error message box came that said c:\windows\system32\services.exe and the computer turns off, anyone know what it is? Windows would run briefly, then just keep close on its own.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode.    To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  I hope this helps.  Good luck.

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• Menu of windows does not correctly appear in Acrobat 11 STD

  When I try to print any PDF file (by clicking file-> print) the print Menu that opens is missing all of the text in the window incl all buttons. I tried to install a separate Adobe Reader in Danish local just to test the application, but it was worse. So uninstalled and collage of Acrobat.

  I also tried click on file-> properties and it is also does not display correctly.

  I'm afraid that this has something to do with the compatibility of Microsoft, but I don't know. I have MS Windows 7 Pro SP1 installed.

  The good news is I can guess the buttons of the bottom 2 - 'OK' (left button) and "Cancel" (right button), which at least allows me to print in the default preferences.

  Any ideas how to fix? I have the latest update installed.

  

  

  I worked with the Adobe support team to solve this problem. After several rootcauses, we found the problem.

  The issue was caused by not having police default Windows "Segoe UI" installed. Strange sounds that Win 7 does not come with the font that is used by this application, but the trick worked.

  Google a website to download the font, I used "Fontpalace.com" - install the police - and that's the problem is resolved.

  

• Client RDP does not correctly open after n time

  7 Enterprise x 64 SP1

  I've migrated to a new laptop about two weeks ago. Migrate to using Windows Easy Transfer. We use Remote Desktop Manager of devolution for RDP connections on my data center. I installed the latest version 8.3.1.0 since I am trying to set me up on top of another computer. It worked very well for most of the day, once I installed and imported my connections to the server. After maybe 6 hours of use, I was unable to reconnect to disconnected sessions or open new sessions. I thought it maybe something with this version, so I uninstalled with Revo Uninstaller to remove all left behind in the registry items, etc. Thinking that perhaps it was this new version, after a reboot, I installed the previous version we used without problem for months, 8.0.12.0.  Work started very well and then after half of my day, it's the same thing, impossible to connect to a disconnected or open sessions. After the closure of Remote Desktop Manager, it leaves the process running there a connection with something, that's not normal behavior. Then, while he was doing this, I tried Windows Remote Desktop connection to try to connect to a server and it gave me the same result. I type my server name in, it could begin the login process, warn me NLA, after pressing Yes and that she would go to the remote session configuration with the loading bar. However, it does connect not what either (work servers I know). Does not seem to mistake, just never loads anything. If I press cancel, it goes back to the screen to specify which server to connect to, but everything is grey, as a connection is suspended.

  I ran all of the important Microsoft and most of the recommended, and optional updates related to the operating system, less the language packs, Bing, etc.. SFC/scannow has detected an error with Diskmgt.chm and repaired. I came across a forum on XP and default.rdp missing in the Documents folder, but can't seem to find anything on Win 7. The only way to make it work again I found it to do a restart of the computer. Try logging off the coast, and then again, but it gives the same result, until I restart. It is not the case after the same amount of time, sometimes it's a few hours, at other times, it's almost the whole day until it happens.

  Any guidance?

  Hi Shakur,

  I posted there is first of all a few days ago and have not received a response yet, so I thought I would try here also.
  Happened yesterday again, worked for about 6 hours of the day and then wham! Will not work until a reboot. Worked fine on my old laptop and everybody on my team, this new notebook computer server. Trying to remove KB2592687. Someone mentioned that was causing errors with RemoteApps on 2008 R2. Thought it was worth a shot.
  Thank you

• Pages of Firefox won't load does not correctly. User name and other action buttons do not respond when clicked. I tried the Java toolkit release, but who doesn't.

  Some sites such as Netvibes and other sites containing columns all of a sudden not correctly displayed. Registration or login buttons do not respond.

  The plugins are up to date.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• huffingtonpost.es/com does not correctly load in safari (and firefox), but he does it in chrome

  I have problems loading of the huffingtonpost.es and sometimes .com on Safari on my mac and also in Firefox. But the web even chrome load perfectly.

  It is the only web that I have problems up to now and is not a related problem of expansion because I don't have extensions in firefox and the same problem occurs there.

  

  Does anyone have an idea of what's going on? It seems that something in relation to the css.

  The really strange thing is... I try to load huffingtonpost.com on safari and do not load correctly, I reload and reload and does not load correctly. Then I load in loads of Chrome perfectly and after that I try to load in safari (or firefox again), then load it. :-/ This does not always happen, but then sometimes drive me crazy.

  Thanks for any help in advance.

  Make sure your OS X software is up-to-date.

  Click on your Apple  top left of your screen.

  In the drop-down menu, click on: software update

  That should launch the App Store.

  If you see an update for OS X El Capitan and Safari, install these updates, restart your Mac and try Huffington Post on Safari and Firefox.

• After the installation of 6.0 KB948465 - X 64 .exe it does not correct the graphic titles and programs on the taskbar

  Downloaded this update KB (above) - not IS NOT CORRECT THE GRAPHICS AND BLURS PROGRAM TITLES ON TASK BAR... VIRUS? PLEASE HELP ME!

  You have another question in these Forums about this;

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/60-KB948465-x64exe-prefer-not-IE-9-force-fed/022efdba-4F65-4e7c-9fff-f4b19f91b85d

  The Service Pack is not designed to solve your graphics.

  Access the site on your computer or the manufacturer of the graphics card > drivers download Section > then key in your computer or a model number graphic card > find your operating system > find two graphics / video or the drivers of the Chipset and download and install.

  See you soon.

• I installed plusv15 of real players and the dvd burner does not work. It freezes and told him to put in a disc.

  I bought plusv15 real player and it has been installed. for some reason any dvd burner does not work. A pop up comes up saying wrong disc record and replace it with a new drive. I did it three times. Real player support me staff referred to you. Windows dvd burner does not work.

  Hello

  I suggest you try to execute this fixit and see if it helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I would also ask you to contact the manufacturer of your computer to check the updates of the firmware of your CD/DVD drive.

  It will be useful.

• Captivate 6.0 does not correctly open the linked PDF

  Hello world

  We Captivate 6.0.0.199 and create a project that will be delivered off-line (whether as html or exe).

  Under the project, there is a button that connects to an external PDF file.

  Result: At the launch of the published project, the PDF file does not.

  I tested 2 attempts:

  #1: I entered the file name of the "naked" just pdf file the action field of the button ("zertifikat_de.pdf") leaving aside any path. After the publication, I copied the PDF in the same level as the other files (on my local hard drive).

  Result: the application exe (or html) started locally does not open the pdf file (nothig happens).

  #2: I used the fileselect box to enter the location of the my pdf file; Thus Capivate will register in the action box this:

  'C:\Users\ast\Documents\LBET\translation\43_Captivate\zertifikat_de.pdf '.

  Which such publication Captivate me to copy the files in publication record.

  Yes, I copy the pdf file in publication record.

  Result: The published application opens a file pdf but THE WRONG ONE! It refers to the location of the original source file where cptx and the original pdf is. When I delete the pdf file, the published application IS NOT open a pdf file.

  It seems that the published application is waiting for my development path on the end-user macnine. It's strange.

  We make this application to run e.g. on CD or in any arbitrary folder.

  How can I me Captivate for this?

  THX.

  Alex

  Please, update as soon as POSSIBLE to 6.0.1.240, you're always on a first version very buggy. The free patch is here for more than a year (October 2012). Not quite sure, but there are a few problems with pdf and files paths resolved if my memory is still OK.

• Open the file in Illustrator prompt 'Options text import' and does not correctly open the file.

  I've dealt with this problem for a while and I'm completely stumped. A colleague was sent in the past without problem .ai files. In a few months, however, its attached .ai files to open properly.

  This is the first screen I get when trying to open files:

  

  Changed without worrying what the boxes are marked or options, the result is always the same:

  

  If you can read the error code is the following:

  {"Body": {"ErrorCode": 500, "FaultMessage": "Unable to get the flow of writing for mac attachment.", "IsTransient": false}}

  Put this line of code in Google returns exactly '0' discoveries.
  

  No one else in the company seems to have a problem with opening the file even when this colleague that it passes to them. I noticed, however, that the file is 141KO in his email, but when I download it, it shrinks to 344 bytes. I don't know if for some reason, my computer is just not download all of the information, or what could happen.

  Again, these are the facts that I know:

  1. She's on a mac and I'm on a PC.

  2. we are both using Illustrator CS6.

  3 other colleagues from work on the PC do not have this problem when it automatically sends it to them.

  4. the file reduced from 141 Ko to 344 bytes when I try to download from his email.

  Edit: I just was sending email for my personal gmail account and the file opened perfectly, so this seems to be a problem with office365.com that is where my company email. Everyone else here uses the same messaging service, however, so it's always an issue with my account.

  Any help or ideas would be very appreciated.

  Thank you!

  Tell him to compress the files before sending them. The e-mail process is pipes files.

• Windows Vista does not correctly open because of the message "Microsoft Runtime library was asked to terminate in an unusual way" clicking OK brings the same message

  Laptop Toshiba Satellite 32-bit

  About Microsoft Visual C ++ Runtime Library

  Unable to get a response from Microsoft

  Have you tried to use system restore to restore your system configuration?

  Start menu > Accessories > system tools > system restore.

  I hope you have some system restore points before the problem started happening. Follow the wizard for your anti-roll system back to one of these restore points.

  System restore only modifies / restores the system configuration - this will not affect your personal files/data.

  So if the problem started to arrive 2-3 days ago, come back to a point of restoration 4 days ago.