Windows does not often after installation of Service Pack 1

Similar Questions

• Could not start after installation of Service Pack 1 - stop: 0x0000c1F5

  original title: stop: 0x0000c1F5

  my computer does not start after you install the service pak1 on my computer toshiba laptop, don't get into safe mode either I get an error message! 0xc01a001d! 3733/91430(\Registry\Machine\Componets\Derived Data...) and also the error code Stop:! 0x0000c1F5

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".

  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer

  http://support.Microsoft.com/kb/970101

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Speaker not working after installation of Service Pack 1 of Vista.

  I have been under Vista Home Premium on my laptop for about 2 years, but have only now went on the internet with it.  I did the updates of windows, including Service Pack 1.  Now the speaker on the laptop does not work.  If I put the mouse on the speaker icon in the lower right corner of the office, he said that no audio output device is installed.

  Before I installed the SP1 download, I have my favorites of a link to the Microsoft page saying that this problem can occur.

  http://support.Microsoft.com/kb/936330

  This led to an application download of Mr. Fixit I read to mean he could diagnose and fix the problem.  All she could say is that there is no audio output device installed.

  So, is it a driver problem caused by Mr. Vista SP1 from Microsoft?  Or what it is - this?  (I was quite civilized with the language that I used here - I would like to meet face to face!)

  Seriously, I hope someone can help me here please.  I'm not one of the younger people really in place with computers, but I'm not totally computer illiterate either.

  Thanks in advance,

  K. Gazza

  Hi, I'm back!

  Problem seems to be solved - speaker is back!

  I just made a couple more windows updates that require a reboot.  To my surprise and my greatest pleasure, I heard the sound of Windows in the process.  It may not have been restarted because I updated Vista with Service Pack 1 yesterday and there is no sound when I started the laptop today.  Perhaps the latest updates is done.

  See you soon,.

  Gazza K

• Audio Acer 5520g does not work after the new service pack

  I installed XP and is up-to-date. However, when a new service pack arrives, it destroyed the Realtech driver that I downloaded from the Acer support site.

  One way to recover is to do a scan complete antivirus C drive.

  Second method is to remove the speakers from the Device Manager, install the Realtech driver after the service pack update.

  The question I have now is that the latest SP crushed the audio driver again.

  Restore restore previous point never works on this or any other question, I've had with windows no matter what...

  All previous options have failed now.

  Any help appricated.

  Download the "RealTek" directly from RealTek driver. ;-)

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• After installation of Service Pack 1 for Vista 64 bits, Windows Security says Malware and firewalls are off.

  I recently reinstalled my copy of Vista 64 bit I hope to solve this problem that has been with me for a while.  Before I wiped and reloaded, Security Center Windows would alert me every day that my firewall protection and malware have been disabled.

  I use Kaspersky Internet Security, which is fully updated and works as it should.  I am able to activate Windows Firewall and bypass the firewall Kaspersky and that error to go away, however, I can't remove the error of malicious software.  I got all these errors directly after a restart after the installation of service pack 1.

  Under Windows Security Center it says, "Kaspersky Internet Security reports that it is turned off," under the heading for malware protection.  When I click on the button to activate under Windows Security, it goes through the steps who say do you trust this program, Yes, Yes, ok.  After choosing all the options of trust Kaspersky and activate this protection, he thinks about it a little, but always returned and said it's off.  It also has a green light saying that Windows Defender is actively protecting your computer.

  I think that my Internet Security Suite is successfully active in these areas and work I checked the menu, check that they work.  In my opinion, after installation of service pack 1 that something I have messed up in the statement that those programs are active or really uninstalled them.

  Even if I can get the only message that the Kaspersky firewall is disabled to disappear by enabling the Windows Firewall, which is not yet as I want.  I want the suite of internet security that I paid to be active and functional on the side of the Windows security features.

  I would appreciate any help with this problem by addressing why he continues to warn me that my protection malware and firewalls are disabled.  Thank you.

  Also install Windows Vista SP2 this problem could be solved, otherwise try to uninstall and reinstall Kaspersky and also, try to get the latest version of Kaspersky.

  If still the same issue please contact Kaspersky support.

• "Private browsing" window does not close after opening web site

  "Private Browsing" window does not close after the opening of a web site; He remains on the side of wight of the screen and cannot be closed.

  It turns out that partially Wen site on the left side of the screen and can be closed.

  Problem solved. Bookmarks removed and replaced and now everything works according to plan.
  Thank you

• LR - CC does not work after installation with creative cloud. I run a W7 64-bit system

  Hello

  LR - CC does not work after installation with creative cloud. I run a W7 64-bit system.

  I got LR 5.7 running and is not installed by the CC.

  What to do

  Thank you.

  Hi Ridder,

  Please visit the solutions proposed in the following article.

  Lightroom does not launch or closes automatically after the splash screen

  I hope this helps.

  Kind regards

  Sumit Singh

• Error occurs after installation of Service Pack 3

  Windows XP starts after installation of Service Pack 3 only in safe mode.
  What about this error, the machine doesn't turn after restoration (to an old restore point) very well, but in this case that I do not have Service Pack 3.

  Can I install updates that are unique in the future, or do I have service pack 3 for windowsupdates in the future?

  Kind regards

  Pluto

  http://support.Microsoft.com/kb/950717

  Steps to take before you install Windows XP Service Pack 3

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Support: https://support.microsoft.com/oas/default.aspx?gprid=1173&st=1&wfxredirect=1

  TaurArian [MVP] 2005-2010 - Update Services

• Problems after installation of Service Pack 3 for Windows xp?

  After you install service pack 3, he started down, then when he tried to start it, nothing, that would make the windows logo then a blue screen. I tried to do a system restore, nothing, I tried to move the date of return in the bio, still nothing, I was payin 120.00 for someone to sit in front of my computer for 3 hours and IT couldn't work, but he ended up doing a full system restore, fortunately, I still have my photos and music but now his works more slowly. He guard tells me to download the package, tried again and poof, done the SAME thing again, this time I did the full restore again and now I'm not even download package. Y at - it something I can do or download for my computer as if it was. I did Defrag, I did the cleaning disc, cookies.etc... I clean up all this. I'm afraid to download updates due to what happened before... Help!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that another repair facility (upgrade AKA on-site) will NOT fix it! [1]

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the deletion appropriate before installing any Windows Service Packs or IE updates and before installing your new anti-virus application (which will require to install WinXP SP3).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ==============
  [1] one who made the "repair" work & you charged $120 to do a repair installation does not know his a * of his elbow. IMHO he should take care of all of the foregoing to you free of charge.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Not able to boot up normally after installation of Service Pack 3.

  Original title: I am trying to download Windowes XP SP3.

  I am trying to download Windowes XP SP3. After installation and reboot my computer only allows me to start in safe mode. It seems that I don't suystem for SP3. Also, in safe mode, it says I can solve problems by going to the Control Panel, but does not give any other direction on what to fix.

  Hi TimWaldal,

  What is the exact error message that you receive in safe mode?

  It seems that Service Pack 3 is not installed correctly.

  (a) that you try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) you can then manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

  Please post back and we do know.

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

• Adobe Premiere Elements does not open after installation

  Hello

  
  I've written before last week. I bought Adobe Photoshop elements 11 and Adobe Premiere elements 11.

  I had a trial version of Photoshop elements 11 and with the code I could access the full version.

  
  However, Premiere Elements did not open after installation. I have a trial version, so I downloaded the full program. I went through the installation process and everything seemed ok, no error message. But when I tried to open Adobe Premiere Elements after you restart the computer, it did not open at all. Nothing happened.
  I uninstalled and reinstalled the program for a couple of times over and over again, but no result. Also tried to download the free trial first, and also it does not work. I checked my Quicktime and updated to the latest version.

  I use a Windows laptop: Asus Intel Core i5 - 2430M, 2.4 GHz
  I hope you can help me!

  Thank you!

  Inge

  Have you seen the answer you received in post http://forums.adobe.com/thread/1226832 your course from last week ?

• Windows does not start after the update...

  Hope someone can help with this,

  I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

  L.Butler,
  Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
  Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IdeaPad Y530: windows does not start after that laptop went to sleep mode.

  Hello

  More great frustration in my life have laptop brand new, this for me.

  After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

  I was able to go back to Windows that day after leaving just laptop without any power and battery.

  I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

  Anyone have any ideas?

  Thanks for the reply.

  That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.