Windows FAx and Scan does not detect my modem, even if Device Manager shows it must be installed and working properly. How to get Windows Fax and Scan to detect my modem?

Similar Questions

• Windows 10 - PC recognize iPad, but iTunes does not. Nothing appears in the Device Manager.

  I followed each step that I could find on the Apple Web site. The PC recognizes the iPad iPad wonder to trust the PC and I do it, but iTunes does not show the iPad and the Device Manager doesn't show anything Apple. I even uninstalled, to alreay redownloaded and reinstalled iTunes.

  Have you tried to remove and reinstall iTunes by following the steps here? All the steps are essential to eliminate corrupt drivers:

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

• My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  Turn off or get rid of Norton.   I really don't see why you need it.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satego x 200-BIOS does not detect SSD but windows 7 for OS usage

  need help here, I got the latest bios 2.50 and my bios does not detect the SSD but an I start windows 7 from my hard drive it is detected and I want to use the ssd as boot drive, please help

  Hello

  Which SSD drive you have exactly?
  I also think it s a compatibility problem between the HARD disk controller (motherboard) and the current SSD drive.

  So you should check if you have the latest firmware of the SSD drive and if it of possible, try another disc SSD of a friend, for example.

  By the way: have you tried to load the default settings in the BIOS?

• Satellite A300-24Z - windows does not detect connected sata hdd

  Hello

  Ago that I bought the new laptop Toshiba Satellite A300. A few days ago, I decided to plug in my old laptop HARD drive - drive is Toshiba MK1234GSX - my new laptop via sata to esata cable. Problem is that windows does not detect a new device, by itself, nor in the Device Manager. Is it possible to do this drive works?

  Thanks for help.

  Hello

  Have you tested other drives?
  This should be checked!

  Please go to BIOS and adjust the default BIOS by pressing F9 button in the BIOS settings.
  Save the changes, and then try again

• HP 15-Ay007la: Wi - Fi does not detect wifi access points. HP AY007LA downgraded to Windows 7.

  Hi again once, I went down my laptop for windows 7. And one, I installed the drivers Wi - Fi, Web page of drivers and works, but when I reboot, the wifi no longer works, I tried to download, uninistalling, install again too many times and do not work. Map Wi - Fi are correctly installed and windows doesn't detect not all bad. But do not work, displays a red one does not detect a Wi - Fi connection. Map of the Internet: bcm43142

  Have you tried pressing the F12 key to enable the wireless?

  The one with the airplane on the key icon.

  It would be the only suggestion I can offer.

  If the bluetooth driver was not installed, try the previous version...

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  FTP://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71440.exe

• Lenovo Windows B590 8.1 tha camera works, but Skype does not detect

  Dear all,

  I'm new to the forum, where as a lurker I already found useful solutions in permeable opportunities. My technical knowledge, by the way, is very modest...

  It happens that my camera works fine on the laptop (a Lenovo B590 running Windows 8.1), allowing me to make videos, but when I installed Skype it does not detect the camera and asked me to 'connect to a camera'... so now I can't do videocalls using Skype.

  Before trying the remedy proposed in this post https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-B590-Webcam-problem/m-p/1572836#... I wanted to ask if he could adapt to my situation or not.

  Concerning

  Tony

  Hi Cruver solid,

  This morning, I tried to run the software proposed in another post, one related to my question. He solved the problem: everything works fine now.

  Thanks to you and your colleagues

  Tony

• Windows Update does not detect the sp1.

  Hi all.

  I do update windows via the control panel and its been so many updates, but it does not detect any service packs.
  Anyone know what I can do to solve the problem?

  My computer is a compaq presario with vista home premium.

  Thank you.

  Hello

  Download SP1 or SP2 from the links below:

  Vista SP1:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  Vista SP2:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  And then perform a clean boot and disable the antivirus, and then restart the computer.
  Clean boot:
  http://support.Microsoft.com/kb/929135

  Install the service pack, and then restart the computer.

  Problem of Windows updates should get fixed after you install the service packs.

  All the best!

• the Windows xp Setup program does not detect my hard drive

  When I try to install Windows XP, it does not detect my hard drive which is visible in the bios.  My bios options are very limited, but I was able to use the bios to change the sata in ide.  It still does not work, and now he is not found with the disc of windows 7 I have.  This isn't a new pc.  He was working at a given time, but foolishly, I formatted the hard drive and have no drivers for my drive hard hitachi.  I bought a new seagate Mak, but now this disc hard is not allocated and is also not detected.  I have no way to get an operating system and I'm in a jam financially... Please help.

  SATA drives are not recognized by Windows XP installation disc.  Change the BIOS SATA ATA sometimes solves this problem and allows you to install and sometimes does not.  Microsoft's solution is to press the F6 key when you are prompted for additional drivers, and then insert a floppy disk (Yes, it takes a floppy) with the top driver.

  "Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
    <>http://support.Microsoft.com/kb/314859 >

  Several means have been formulated to work around needing a floppy disk.  You can view the following items:

  'Install Windovs XP on SATA without floppy (F6)'
    <>http://News.Softpedia.com/news/install-Windows-XP-on-SATA-without-a-floppy-F6-47807.shtml >

  "Install Windows XP on a SATA hard drive"
    <>http://en.kioskea.NET/FAQ/2544-installing-Windows-XP-on-a-SATA-hard-drive >

  HTH,
  JW

• Windows XP does not detect any internet at all despite the computer with the modem to work.

  I recently installed Windows XP Professional on my new iMac via bootcamp.  While Windows itself works fine, it won't connect to internet at all.  Despite being connected to a modem ADSL via a Ethernet cable, and also have wireless internet, Windows does not detect any signal.  On the internet in the Control Panel, all connections page that appears is "1394 connection" under the heading "LAN or Internet high speed."  I tried several times to put in place a new internet connection through the Setup Wizard and everytime, no internet is detected.

  I know that the modem works because all the other computers in my house are fine online, including on the side of Mac of the iMac.  If anyone has an idea as to how I should resolve this problem, your help would be greatly appreciated!

  Thank you

  Daniel

  Moreover, these are things I've already tried:

  I've tried to manually and automatically set up an internet connection
  I spoke with my ISP, the modem works fine
  I have re-partitioned the hard drive and reinstalled XP

  The "1394 connection" is the IEEE 1394 (FireWire) from your computer.  There should be cable system and under the heading wireless connections "LAN or Internet high speed."   There is no need to run the Network Setup Wizard or set up a new connection.

  Open the Device Manager (Start > run > devmgmt.msc ) and go to the network adapters section.  You may need to install the drivers for them.

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• Reinstalled Windows Vista 32 bit on my 64-bit computer. Does not detect not NIC

  I was running a Windows 7 on a 64-bit computer. A Lenovo Thinkpad, due to some strange reason, that my computer has started to slow down and suspended. I ran all kinds of tests to see if it was a virus, but the computer is clean as a whistle.

  I decided to reinstall the operating system to see if it was a HARD drive problem or just software. I couldn't find my windows 7 ultimate DVD so I installed the Vista 32 bit and it works fine. The only problem that I face, it's that his does not detect does not the wireless network card. I went to control panel > Device Manager > network adapters and can't find LAN options.
  I'm sure that the wireless adapter exists because I used it for more than 6 months.
  Is there a way to fix this?

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  It will be useful.

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• My Windows Media Player does not detect a burner.

  I recently downloaded Napster to download music and since I did, somehow now, windows media player is not allow me to burn the music I download on a CD, it says "connect a burner and restart player.» I can listen to music on the computer, but now it does not detect a burner. How to get windows to detect my burner?

  Hello mandyrose,

  Have you tried to uninstall the dvd via the Device Manager drive then restart PC to let Windows reinstall? You can do it. If the problem is still there, can give a try? It is a quick easy fix from Microsoft, here is the link: http://support.microsoft.com/kb/314060. You need to uninstall all third-party software (example: Roxio, Nero, or iTunes) from your computer before you make this correction. After you restart, you can reinstall your software and try again to see if that solves your problem. Otherwise, it could be a bad optical drive. Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)