Windows Firewall does not start, and the service is missing

Similar Questions

• my windows firewall does not start and I get a erroe code 5, can someone help me

  my windows firewall does not start and I get a erroe code 5, can someone help me

  Hello

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.

  Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996

  Method 2.

  Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Mac does not start and the fans going crazy

  Computer does not start and the fans work hard and fast. Someone has an idea what is the problem and how can I solve this problem?

  OLA I will try help EU tenho um macbook pro, mas esse problema não me it happened ainda EU acho seria o seu mac origem help esse problema pode formatar better.

  SE nao tem'm ligar o seu osx para formatar use cmd + r e ligar pressionar cmd + r ele deve AI PODES ligar restore o seu novo osx.

• Satellite Pro L300-21F does not start and the screen remains blank

  L300-21F is aged 18 months, so out of warranty. When you press the power button, you can hear the fan and a "click" but the hard drive does not start and the screen remains blank. The power and the battery on the headlight LEDs, but the switch light does not work. I checked the power supply and it is 19.3V and substituted a good known. Removed the battery, tried with just the power cord and still nothing. Pressing ESC or F2 when you press the button power does not bring to the top of the screen of the bios or any other message. I have concluded there is no power the jury. A friend he had its technology take a look and he concluded Council is probably a friend.

  So my questions are:
  1. He's probably right?
  2. is it a common problem with an easy solution?
  3. what else can do before shelling out for a new Board of Directors?
  4. is there a link where I can find how to disassemble the case?

  Any help appreciated

  Hello

  > 1. He's probably right?

  Yes, it looks like motherboard failure

  > 2. Is this a common problem with an easy solution?

  If it's a motherboard problem, the whole motherboard is replaced. Quite expensive part...

  > 3. What else can do before shelling out for a new Board of Directors?

  I don't think you can do anything with fried mobo

  > 4. Is there a link where I can find how to disassemble the case?

  Take a look at the site called irisvista.com

• surcurity essentials does not start, and the windows firewall does not illuminate

  Hello

  I have a problem, he seems to have had a virus on my pc. Essentials of security does not illuminate and the windows firewall will not also turn on, I tried to use the tool to "fix" windows and it doesn't solve the problem.

  the original virus seemed to rename its self as a program existing and renamed the oringinal by a space in the name, for example "adobearm.exe" became "adobearm .exe" there is a space before the dot.

  The virus called his free adobearm.exe icon because it is a yellow / orange with a letter H, at the Center

  different file name her seemed to be part of the virus included "ag7yl5x8.exe".

  If you tried to close them in the task manager that they just either came back or a different file name would appear in the list.

  I also couldn't do a windows update, but I think as the tool to 'fix' as cured this problem.

  Can someone help me please.

  Thank you

  PS can't do a restore either

  I start here, THEN difficulty any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Windows Firewall does not start

  My firewall does not start.  It gives the service specific error code 13.  Tried to manually start the service, no luck.  Also checked the dependencies, all not working no chance. Looking for spyware and viruses.  No luck.  Searched everywhere on the internet solutions and found only dead ends.

  The Windows Firewall service completed with error 13 (0xD) special service.

  Thanks for any help.

  E-mail address is removed from the privacy *.

  Hello Bill,

  Thanks for posting on the Microsoft answers Forum.

  It seems that you have studied this question, but I have a few questions to help you troubleshoot.

  • When the firewall service has failed to start?
  • You have errors in the log of events dealing with the firewall service? Check the system and safety and the Application event log.
  • The Firewall Service is set to automatic? She is arrested or if it is in a State of waiting? Is the journal on the expected system Local?
  • Please check the remote procedure call Service and the Base Filtering Engine Service is started and set to automatic.
  • You have any 3rd party firewall in place in addition to the Windows Firewall?

  Please let me know the results, so I can continue to help you.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Firewall does not start I tried many routes to solve this problem, anyone know how to help I did a lot of different types of suggestions that I read on the net, and I'm still having no luck. Please can someone help?

  Anyway I recently installed a Kaspersky Internet Security2010 trail version, I run Windows Vista, my computer is new, I know that there are no viruses, malware or spyware. However, I have this error code 6801, and I can not turn on the windows firewall. This started after I removed the version Kaspersky track. He also tells me that the associated program does not want to start "Yes or no" of course I tried yes then received this error 6801. I goggled the error and tried different ways to fix this error but still no luck. I'm a bit about computers, I checked the services and his here said automatic but not started. Tried again to start manually and this time it is said ' cannot start Firewall Win, if it comes to a product non-windows then contact suppliers and relay the error 6801.» So please if someone knows something I can do to solve this problem I do not have the disk to reboot vista and I'm losing my mind, I was in it for five days and his crazy wife. Another reason, I would like to correct this problem is I can not use my bitcomet torrent Downloader, I think that this problem of firewall is the problem because everything was going well until the Kaspersky was installed and then my router accidentally disconnected. Sorry for the hike, I'm very frustrated. Just for you all also say that I tried to port forward, with and without static ip and now I think I need to do something about this error until I can fix my bitcomet. I hope that someone takes the time to read this and respond, thanks hope someone soon!

  Visit the kasperersky site... they have the solution you need... Read it yesterday...

• After you run the 2011-12-15 updates, Windows Firewall does not start.

  I have my computer set up to run automatically updates. After the last set of updates, I am unable to start Windows Firewall by all means. Service, Mpssvc has an error message "cannot read the description: error code 15100" when I check it in the Services window. I am running Vista Home Premium 64-bit with Service Pack 2 installed.

  I ran the Microsoft Fixit for firewall services and received the message that "Windows Firewall service is not running or is not started. The Fixit was not able to start the firewall and Mpssvc.

  Hello

  -What updates caused the problem to occur?

   
  Updated version has a problem in the history of the update.
   
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  (b) in the left pane, click view update history.
  c. to display more information about an update, double-click it.
   

  Follow these methods and see if the problem still occurs.

  Method 1:

  Do SFC scan and check if the problem is related to the integrity of system files.

  Method 2:

  Do System Restore to the point that your computer worked very well and install updates manually ensuring that do not install the problem causing the update unless it says 'important update '.

• Windows vista does not start try the recovery disk and nothing

  I have a pavilion hp a1712n with windows vista starts not tried the disk recovery and nothing, it sounds like it is stuck in mode 'sleep'. I can hear it loading but it dosnt take the cd/dvd drive, I tried unpluging the drive to see if it will continue to load, but it didn't. I can not use the key to go into bios Board or something, all ideas given lose don't are not important computer been gave me this problem, so if there is something that I can do but personal files will be lost is very well thank you all

  Hi scoobydoochick,

  1. what recovery disc do you have?

  2. you receive an error message?

  3. you see the computer manufacturer's logo while you start the computer?

  Looks like that there are some hardware failure on the computer that is preventing the computer from starting.

  Will need you a Windows vista installation disc as recovery are different from the install disc and restore disks are created by the computer manufacturer, we are not aware of its functions.

  Once you get the Windows vista installation disc, that you try startup repair by using the link below or take the local computer tech shop and the material tested on the computer.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player does not start, and the accidents of life Mail

  Hi all

  I have a problem: I'm using Vista Home Basic version US, MS 2 MS and my Windows Media Player does not start, Windows life Mail (worm 2009) crashes when I want to write a new e-mail message and does not work Windows 7 Upgrade advisor. So there must be a common problem.
  Any suggestions how to solve this problem would be highly appreciated.
  Marek Köter

  Hi Marek D,.

  A. what happens when you start the media player?

  B. what happens when you run the Upgrade Advisor?

  C. when he last work very well?

  D. recent changes made on your computer?

  E. you get any error message?

  Please answer in return.

  For issues related to windows live mail, you can post your queries to the discussion of direct mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Bindu S - Microsoft Support

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Satellite U300-13U does not start and the recovery disc fails to too much work

  Hi all

  I have the above computer (or should I say my wife) & it is nothing that a good pain since the first day we got it.
  I have had it about 2 years & had to reformat the HD at least 6-8 times using the product recovery disc as laptop starts.
  The laptop runs Vista.

  In any case, problem I have now is that new laptop does not start, but for some reason any product recovery disc also does not work...
  What I can do...

  I have read on various forums that it might work if I reformat the HD first using some s/w on a bootable CD but how / what S/W can I use...?
  The laptop has a SATA HD 160 GB installed. How can I check that it all works.
  I don't know if the current problem is S/W or related material...

  Toshiba has a utility that I can use...?

  Thanks a lot for all the help...

  John

  Hello

  What happened exactly?
  Do you receive error messages by using the recovery disk?

  Check if the HARD drive is OK! You can check in the BIOS.
  If the HARD drive is listed in the BIOS then the HARD drive and HARD drive found BIOS is not dead.

  Usually, you might start Notepad with the help of a Live disc for example Bart PE
  It s a bootable windows CD/DVD live

  http://www.nu2.nu/pebuilder/

  This can allows you to format the HARD disk, and then use the recovery disc!

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)