Windows has stopped loading and is now stuck

Similar Questions

• Installer of Modules of Windows has stopped working and was closed

  Hello
  I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago.  When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed."  I have already reinstalled Windows Updates and Microsoft Updates, nothing helps.  Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
  Help?
  Thank you!

  Greetings mollypopsicle,

  I see that we have always had problems with this update.  This leaves me with the question about the possibility of fi computer update auto is damaged during download.

  I would like to have you create a folder on your desktop.  Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.

  If you have a download manager, please use it to download the KB958623 update from this Web site

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20

  Make sure you use the version of Windows Vista that applies to your system.

  Once the download is complete and before running the update

  1. Restart your system in safe mode with networking, as described in the above post from Brian.
  2. Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
  3. If this does not properly complete, were there a pop-up Windows indicating that an error?  If so, what were these errors?
  4. Maybe it's that the error you receive is that this update does not apply to your system.  If so, this update can be hidden in your list of updates.

  Here is a link on how to hide the update

  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx#EZH

  Select only the I'm getting offered an update from Windows that I don't want.

  However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition.  Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.

  Thank you and continue to keep us informed of the State of this update.

  Best regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• I get messages that support and problems Windows has stopped working. and also that I have no more memory on line 2. What can I do to fix this?

  I get messages that support and problems Windows has stopped working.  I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work.  I also get messages that I have not more memory on line 2.  What can I do to fix this?

  Hello

  1. could you give us the exact error message?
  2. Once you get this error message? This is when using Internet Explorer?

  In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
  http://support.Microsoft.com/kb/2267427

  I hope this helps.

• Host process for services Windows has stopped working and was closed.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  How to fix the "host process for windows services stopped working and was closed" on Vista

  http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/

  I hope I could help

• "Audio Windows has stopped working" and "host process for windows services stopped working.

  Hello. I recently had to reinstall windows vista on my computer. Everything works well except that I continue to have problems with the audio. When I play youtube videos or to make Skype calls, that the sound disappears and I get the message "Windows Audio has stopped working" immediately followed by the message "host process for windows services stopped working." I remember having this problem in the past, every time that I had to restore the operating system, but I don't remember what I did to remedy. I went to the history of my problem and it's certainly a problem with Windows Audio. What can I do?

  Hello

  1. The problem only affects Skype and Youtube videos?
  2. The sound works fine on the computer in other circumstances?
  3. You reinstall the audio drivers after reinstalling Windows?

  Try the methods provided and see if it helps to solve the problem.

  Method 1:
  Check out the link and follow the steps.
  
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  Method 2:
  You can also visit this link and follow the steps in the article.
  
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Explorer Windows has stopped working and then.

  Hi, I am new to PC so I don't know what the problem with my thing.

  There are 2 days I was closing my PC but the PC would shut down for 5 minutes and stay in office, after I received a message "Windows Explorer has stopped working" (while the message is pop up, my PC is slow and laggy as hell, it took me 2 minutes to close the message because the mouse was no lag and difficult to control) and then I closed the message Shut down PC normally. And the next day, my PC has become very lag (if I open 2 tabs on Firefox, the PC will freeze) even with the right button on a game on desktop icon, it takes 20 seconds to show me the option to copy or cut or ect... I tried to delete everything (games, yahoo, ect..) but the problem still there. I use Dell inspiron 14R with little window 7 x 32.

  If some1 has the same problem and fixed it please help me :(

  And sorry for my bad English

  Given that you had cracks and uTorrent there, it is very likely that the system needs a thorough cleaning. This forum is not implemented for this because newspapers can be quite long, and unfortunately, the Dell malware removal forum is closed.

  We can still help.

  My suggestion is to sign up for a free account and post a log HijackThis to SpywareHammer for trained security analysts can guide you through a few steps in order to get better performance. Please use the same username that you have here, if possible, so I can track your progress.
  Instructions for display at SpywareHammer are HERE.

  * Important!  Please include a link to this topic at Dell so they see what we have done so far. In this way, your help at the other site won't ask you to repeat the same analyses.

  Good luck! Let us know if this solves the problem.

• Windows switches mode 'sleep' and is now stuck at 'update 27 of 105.

  Help, please!  Last night, I closed my laptop and he told me it was going to continue to install updates.  105 ofr them.  I have not thought very well no problem because I was going to bed anyway.  So I close the lid and go to bed when he was to be updated on 27.  When I opened this morning - a full 15 hours later, it was still updating the 27.  So I waited and nothing happened.  It has not frozen as the blue circle turns again.

  I turned off and removed the battery and then lit it back to see he's trying to return to the update of the 27.  So I tried from the laptop in safe mode and now it says "update configuration" but in a lower resolution. fun.  Is it possible that I can start windows and circumvent the updates?

  Hi Rab_Random,

  What Version\Edition of Windows you are running on your computer?

  Step 1: Run system restore and startup repair, you can follow the steps mentioned in the article below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  (See method 1 article)

  Step 2: Delete the file pending.xml via the system recovery command prompt

  (As in step 1) access system recovery options. You can also check out the link below

  What are the System Recovery Options?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Go to the system recovery command prompt and run the following commands

  ICACLS c:\windows\winsxs\pending.xml/grant administrators: F

  del c:\windows\winsxs\pending.xml

  Once the command is executed successfully, check if the problem is solved and let me know

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Host process for windows has stopped working and was closed - another

  Hello, I had this problem for a month, can anyone identify and have a solution? Thank you!

  On the event viewer:

  Log name: Application
  Source: Application error
  Date: 2010-06-23 03:45:51
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Computer laptop-fan
  Description:
  Application failure application svchost.exe, version 6.0.6001.18000, time stamp 0x47918b89, failed module unknown, version 0.0.0.0, time stamp 0x00000000, exception 0xc0000005, offset error 0x0124f5c0, process 0x1fc0 id code, start on time 0x01cb12a81a351c94.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      1000
      2
      100
      0 x 80000000000000
     
      27572
      Application
      Computer laptop-fan
     
   
   
      Svchost.exe
      6.0.6001.18000
      47918b 89
      unknown
      0.0.0.0
      00000000
      c0000005
      0124f5c0
      FC 1-0
      01cb12a81a351c94
   
  

  Reports on the problems and Solutions:

  Product
  Host process for Windows Services

  Problem
  Stopped working

  Date
  2010-06-19 10:47

  Status
  Not reported

  Signature of the problem
  Problem event name: BEX
  Application name: svchost.exe
  Application version: 6.0.6001.18000
  Application timestamp: 47918b 89
  Fault Module name: StackHash_6bc7
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0126f5c0
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Additional information 1: 6bc7
  More information 2: f3f6a1403802118ada460cd45530935b
  Information additional 3:6477
  Additional information 4: d34edb9b57aa7d1aac3252e1a9591198

  Files helping to describe the problem
  Version.txt
  AppCompat.txt
  Memory.HDMP
  minidump.mdmp

  Thanks again!

  Hello

  IE was running is very important to the solution to the issue - check below.

  -----------------------------------

  BEX errors often are caused by toolbars such as Google, TrendMicro and others. You use one
  3rd toolbars in IE? Cause and solution is the same for Vista and Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave remnants behind which emits causes).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore advanced settings, and then click RESET - APPLY / OK

  IE - Tools - Internet Options - Security tab - click on Reset all areas - APPLY / OK

  Close and restart IE or IE with no addons

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - tools - manage Addons (for sure disable SSV2 if she's here, it is no longer necessary but Java still
  installs and it causes problems - you never update Java to go back in and turn it off again). Look for other
  possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right.
  Allowed are usually OK and "unauthorized" are not always bad. If in doubt about a program, ask
  topic here.

  Could be that a BHO - SpyBHOremover - free - program of autonomous, needs no installation, download, unzip
  and run. Also not all the BHO is bad, that some managed bars of tools and features that you added.
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you never think malware updated, then
  run as a scanner.
  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my windows has stopped working and I can't fix it...

  the problem of occurs only on my user is not all user accounts, I tried to restore my computer to a date that he did not work properly and it does not solve the problem either, I am invited to check updates and to install updates that may be available, but which is not the problem either

  the problem of occurs only on my user is not all user accounts, I tried to restore my computer to a date that he did not work properly and it does not solve the problem either, I am invited to check updates and to install updates that may be available, but which is not the problem either

  Seems to me you have already highlighted the area problem... your user account. It may be damaged.
  How about you...
  1. login to your Admin account
  2 DELETE your user account, create a user account for yourself?
  Note: If you do this, make careful when deleting account, you will receive an option to Save the data of your account, except e-mail messages that will need to be registered via file > export > Messages.

  t-4-2

• Windows Control Panel has stopped working and cannot read the CD

  Original title: windows control panel has stopped working

  When I went to install my Rosetta Stone program it showed Windows has stopped working and then installed the program and when I put the cd in my computer saids windows control panel has stopped working and cannot read the cd

  Hello

  You say "Control Panel has stopped working" or "Windows Explorer has stopped working"?

  Follow the steps mentioned in the article below and check if that helps:

  Start the computer in a clean boot state

  Start your computer in a clean boot state, and check if your computer is able to read the CD. Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows has stopped working. Window is to check a solution to the problem...

  I can't open the files in windows and whenever I opened a folder, there will be a pop-up window indicating the windows has stopped working and it checks for a solution to the problem.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Installer of Modules of Windows Vista - Windows has stopped working... Configuration 3 of 3 to 0%

  original title: Windows Vista Ugh.

  I have Windows Vista Home Premium on a laptop Gateway. I get the installer of Modules of Windows has stopped working and has been the error message closed as well as the configuration 3 of 3 0% starting upwards.  Thank God the restart of death cycle is no longer happens, but it always appears when I restart/start my computer.  I have tried almost everything that I found online to fix this, and yet I still have these questions. I can not install updates to Windows due to the fault of the Windows Modules Installer every 3 minutes and I can't install SP2 even when I tried the 64 bit version of stand alone for my computer.  I literally a novel of installs failed in my history of windows because of this update and I constantly receive error messages when you try to install the update SP2 failed. I don't know what else to try now that I tried the system restore, and none of the dates are far enough for these errors go away.  Help, please.

  Check here the answer to the similar problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/popup-box-says-Windows-module-installer-has/ae2fbeba-6f15-4676-8ddc-9cd926a79730

  Tom Ferguson

  PS

  I've seen many references to Vista but Vista ugh is new to me. ;-)

  TF

• Windows has stopped working

  Whenever I am busy with my computer, I get a message your windows has stopped working and stopped. It doesn't mean I don't work, but everything starts to become slower and slower. I am perfectly up to date with my updates, so don't know what to do.

  Hello

  Looks like some component stopped, and windows needs to restart. Did you check the event log again? That may indicate this problem occurs because the machine is not crashing or stopping automatically (these actions would indicate a hardware problem).

  Had you updated or installed new software before the appearance of this problem? There are clean boot steps you can follow to isolate the problem of troubleshooting here:http://support.microsoft.com/kb/929135

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista. Setup.exe has stopped working and I can't get the program to load.

  I have a Gateway laptop with Windows Vista.  I put Norton anti-virus on it last year.  Now I am trying to run the new disk of Norton and the computer tells me that setup.exe has stopped working and I can't run the program. Norton 2008 has been removed.

  http://Service1.Symantec.com/support/tsgeninfo.nsf/docid/2005033108162039

  Download/run their abovelink Norton Uninstall tool to ensure that all "Norton" is deleted.

  Then, right-click on the setup.exe Norton > run as admin.

  If the above does not help:

  http://www.Symantec.com/en/AU/Norton/support/index.jsp

  Contact the Norton Support for problems with their software.

  See you soon. Mick Murphy - Microsoft partner