Windows has stopped this device because it has reported problems. ___Click (code 43) 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.

Similar Questions

• This device cannot start. (Code 10) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Map #2 Microsoft Tun Miniport
  This device cannot start. (Code 10)  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
  ???

  Hi AnaSk,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows.

  Download and install the latest drivers from the computer's network adapter or the website of the manufacturer of the device.

  See the article below

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

• Error: "Windows has stopped this device because it has reported problems. (Code 43)

  Original title: chip Blue tooth

  Summer just check via the Device Manager and found my 'CSR Bluetooth Chip' has a problem: "Windows has stopped this device because it has reported problems. (Code 43)' checked the update driver and it's all good, no matter what can shed light on this problem?

  Hello Brady.

  Thanks for posting your concern to Mirosoft forum, I'll certainly help you with this problem.

  You might face this problem because damaged or obsolete Bluetooth drivers. I suggest you follow the steps below and check if it helps.

  1. Did you of recent changes to the computer before this problem?
  2. When you receive this error message?
  3. Your computer will detect the Bluetooth device?

  Please follow the methods and check the status of the issue.

  Method 1: Run the diagnostic tool

  The diagnostic tool is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.

  Connect the devices to the computer.

  Hardware devices do not work or are not detected in Windows

  If the problem persists, follow method 2.

  Method 2: Uninstall and reinstall the Bluetooth driver.

  Follow the steps below to uninstall the Bluetooth driver.

  1. Click Start
  2. Click on Control Panel.
  3. Go to system and security.
  4. Under System , click Device Manager.
  5. You can get driver Bluetooth and expand it.
  6. Right click on the driver Bluetooth and select Uninstall.
  7. Now, restart the computer and check the status of the Bluetooth driver.

  See also:

  Code 43: Windows has stopped this device because it has reported problems

  Devices & drivers

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• peripheral Bluetooth, Windows has stopped this device because it has reported problems. (Code 43)

  my bluetooth device does not work and this is the message I get:

  Windows has stopped this device because it has reported problems. (Code 43)

  Windows has stopped this device because it has reported problems. (Code 43)

  Diagnosis

  A device driver has notified the operating system that the device failed.

  Hardware devices do not work or are not detected in Windows FIX IT:

  http://support.Microsoft.com/mats/hardware_device_problems

• AMD Radeon HD: Windows has stopped this device because it has reported problems. (Code 43)

  In my device manager, in graphics cards, for my AMD Radeon 7500,7600 M graphics card in the series, the properties display the following error message:
  "Windows has stopped this device because it has reported problems. (Code 43) »

  I uninstalled the drivers and reinstalled them - it's the 12.104.0.0 version, which I have confirmed is the last. I have the Catalyst Control Center installed as well.

  Can someone help me understand this error? Why would he stop? What would be my next steps to try to solve it?

  See you soon,.

  Sam

  Hi thanks for trying, but the Dell drivers are those which deal with the problem of restart.

  I find the most recent driver Intel HD 4000 (Win64_15313_intel) and installed version, then I installed the latest drivers AMD (13-4_mobility_win7_win8_64_dd_ccc_whql_AMD) on the site of AMD. This solved my problems and my graphics card works fine now.

  So yes, just repeat those it tells me to install when I get my serial number and OS (Windows 7) were:

  Intel: 5423_Video_Driver_T6XGJ_WN_8.15.10.2669_A02

  AMD: 5423_Video_Driver_VGR24_WN_8.951.9.0_A02

  And these caused problems without end - the graphics card would not work, and then when I installed drivers from AMD, Dell, it would cause my system to reboot every 2 or 3 minutes. It looked like some kind of incompatibility between the two graphics cards and the drivers provided.

  The other representative of Dell told me the same thing that you - so I wanted to post my solution in case anyone else has this problem.

• My 4 GB USB shows this error "Windows has stopped this device because it has reported problems. (Code 43) ». How do slove this problem pls tell me

  My 4 GB USB shows this error "Windows has stopped this device because it has reported problems. (Code 43) ». How do slove this problem pls tell me

  Try the USB device on another computer.  If you get the same error in another computer, then the unit has probably missed and the files that it contains are lost.

• USB key. Out without button to safely remove. Windows has stopped this device because it has reported problems. (Code 43)

  I need help to be able to reuse the disk.  The drive is not displayed when inserted or displayed in Device Manager.  Problem started when it was deleted without being stopped properly first.  Arrive in a Vista machine.   Windows has stopped this device because it has reported problems. (Code 43).  I download programs to repair files and other things with Microsoft Partners do not anything to solve this problem.  Any help will be appreciated.  I've caused the problem, but is the difficulty of it.

  Try to put the device in another computer.  If you get the same message, then it looks like you have destroyed it by unplugging it wrong.  It doesn't happen often, but you would not be the first person that I heard what is happening to.

• I think Windows has stopped this device because it has reported problems. (Code 43) when connecting iPod to the PC.

  Original title: Code 43 problem

  iPod is no longer detected when plugged to the USB port.  Instead, I get the following error message: "Windows has stopped this device because it has reported problems. (Code 43) »

  Crisis averted!  On another head shot... I thought that maybe the problem could be in the sync cable since the Apple store employee had no problem with the iPod.  I bought a new cable and the computer immediately recognized my iPod.  The old cable is now in the trash.

  Thank you for your help.

  Bob

• Transcend storage device when connected gives error "Windows has stopped this device because it has reported problems. (Code 43) »

  Original title: Windows has stopped this device because it has reported problems. (Code 43) ».

  Hi, I have a storage device 'Transcend', but when I connect it it gives me "Windows has stopped this device because it has reported problems. (Code 43) »

  . in the last ididnt have had problems with this unit. what I can do.

  Shirly

  Hello

  1. What is the brand and model of the device of Transcend storage?

  2. other USB devices work on your computer?

  Error code 43 indicates that one of the motors controlling the unit notified the operating system that the device failed in some way.

  Method 1:

  Step 1:

  I suggest you try plug the storage device Transcend to another computer and check if it works.

  Step 2:

  Also, try to connect the Transcend storage device on another USB port and check if it's work (which you know are working perfectly).

  Method 2:

  You can run the diagnostic Fixit tool. Check out the following link.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

  Method 3:

  You can check after uninstalling and reinstalling the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  Reference:

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  Note: the information provided in the article mentioned above are applicable to Windows 7 too.

  Method 4:

  You can try to install the latest drivers for the storage device Transcend on the manufacturing site and check if it helps. Check out the following link.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Code 43: Windows has stopped this device because it has reported problems

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = ws.10) .aspx

  It will be useful.

• Error "Windows has stopped this device because it has reported problems. (Code 43) "when I try to plug my mouse optical usb into the USB port.

  Original title:

  First here is my card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02479651&cc=ca&dlc=en&lang=en&lc=en&product=4299342 desktop pc
  and my mobo card http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02560084&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=4299342
  (running windows 7 x 64 and not changed all my pc hardware so everything on the Web page is true)

  in any case, when I try to plug my mouse optical usb in the port of e/s (usb port) on the front panel (which supports usb 2.0) a notification pops up saying
  "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. Help to solve this problem, click this message. "
  so I click it and and called up pop-up windows
  "the usb device not recognize."
  display 1 unknown device. Link to the image: http://img38.imageshack.us/img38/3579/usbdevicenotrecognizewi.jpg
  Then I double click on it, next pop up another window called "unknown device properties" and under "device status", he said:
  "Windows has stopped this device because it has reported problems. (Code 43) »
  Link to the image: http://img204.imageshack.us/img204/8597/unknowndeviceproperties.jpg

  Also the same things happen when I plug in usb, keyboard , but not when I plug a flashdrive usb 2.0 without notification or anything pop up.

  Here's what I'm trying to fix it but ended up with saying it was installing the device, installation failed and getting the error failed and unrecognized again...

  • Plug my optical mouse on my other ports and it works perfectly fine (to see if its working)
  • Plug the mouse (in the wrong port), went to Device Manager and uninstall the unknown device, reboot with usb plug in and have the connection to the internet (not decided)
  • Uninstall all devices under USB bus controllers in the Manager device and rebooted with mouse in internet connection (not decided)
  • Went to device manager expanded bus controllers USB right-click on power management all the device label "usb root hub" click and uncheck the box "allow the computer to turn off this device to save power" and reboot (do not set)
  • Open the normal startup in msconfig (system configuration) selected and restarted (did not set)
  • Shut down the computer, disconnect the plug, unplug all the devices connected to all IO ports (usb port specifically) and my desktop pc has left alone for an hour and a half and start it to the top after with everything back plug (mouse in the wrong port) (has not set)

  Note: when the mouse is connected to the usb port it is light on substance, but its does not (not flashing do not and when you move, mouse is frozen on the monitor)

  Hello

  The results highlight the drivers. It is best you contact HP support and get all the latest device drivers.

  http://WWW8.HP.com/ca/en/support-drivers.html

• Windows has stopped this device because it has reported problems. (Code 43) Card problem Nvidia GT540m Grphics in Dell XPS 15

  Windows has stopped this device because it has reported problems. (Code 43)

  I have a Dell xps laptop l502x and his entry up with error code 43 in the nvidia gt540m in Device Manager. I tried to uninstall and then reinstall the drivers for it but it didn't work, again I tried with the restoration of the system and backup system too but nothing could fix the problem. whenever I try to open up the Nvidia control center a popup comes up saying "the NVIDIA display settings not available" Please help me my email - :) * address email is removed from the privacy *.
  All this stuff happened only after windows update in the afternoon and at night when I started my system it happened :/ HELP PLEASE

  You did the mistake of using windows update for drivers?

  Visit Dell support, specific to your tag # and update drivers

• Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed.

  Separated from this thread.

  Hello

  I'm faced with the same question. I went to settings of your laptop and ran the recovery, but it did not help. I went to Device Manager and I noticed an error: Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor has failed. Tried to fix that with an alternative of Microsoft Community (http://support.microsoft.com/mats/hardware_device_problems/?wa=wsignin1.0), but the issue could not be resolved. I don't know if they are related, but I think so. Spent so much time trying to solve this problem and would be really grateful for the help. Have had the computer for less than 3 weeks...

  Ewa

  Hi Ewa,

  Thanks for the reply.

  I suggest you to update the drivers for the chipset of your computer and check if it helps. You can use the link below. Select the appropriate component and the operating system from the list. The link given below is for Lenovo 11 2 yoga, if you have any other device then please provide us with the exact model number or select the correct model number.

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Yoga-series/Yoga-2-11-notebook-Lenovo?c=1

  As you mentioned that the other two USB ports work correctly, according to me is not a problem with the driver. It seems to be a hardware problem.

  Let us know the status.

• Windows has stopped the device because it has reported problems. Code 43 with generic bluetooth adapter.

  Windows has stopped the device because it has reported problems. Code 43. Something with the generic bluetooth adapter. What should do?

  Original title: Please help

  Hi JovanaNesic,

  One of the motors controlling the unit notified the operating system that the device has failed in some way.

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If you have already run the Troubleshooting Wizard, you can view the documentation for the hardware for more information about diagnosing the problem.

• Port_ #0003.Hub_ #0005, Windows has stopped this device because it has reported problems. (Code 43)

  my computer did not recognize my usb to the printer device.

  Hello

  1. what operating system is installed on the computer?

  2. this printer was working on the computer before?

  3. have you made changes on the computer recently?

  4. What is the brand and model of the computer?

  5. What is the brand and model of the printer?

  Try the following steps.

  Method 1.

  Connect the printer on another computer and check if the printer works fine.

  Plug another usb printer and check if the printer works fine on this computer.

  Open the hardware and devices Troubleshooter: http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2.

  I also suggest you follow the steps in this article.

  Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Refer.

  Code 43: Windows has stopped this device because it has reported problems: http://TechNet.Microsoft.com/en-us/library/cc725873%28V=WS.10%29.aspx

  I hope this helps.

• Windows has stopped this device (USB 2.0 Flash Disk) because it has reported problems. (Code 43)

  I have USB 2.0 Flash Disk of Orchid do. This device worked perfectly until I downloaded from MS Download Center "Microsoft USB Flash Drive Manager" and tried to install this. Although the program has not installed message stating that "this program is not applicable for the Version of Windows installed on your computer", but it made my flash drive stop working after the installation fails. Now, I always get error message this device driver was not successfully installed (USB device not recognized) and your USB device has malfunctioned or Windows has stopped this device because it has reported problems (Code 43). In the Device Manager under USB controllers, the device is listed as "unknown device". I tried most of the methods described in the forum, but so far none of them has proved to be successful. I will ask members of the forum of good want to let me know if my device itself has developed some defect (hardware failure) or is - having something to do with driver has been corrupted (software compatibility problem) and if so what is the corrective treatment / necessary rectification. Furthermore, I must say here that I am running Windows 7 RC OS version on my computer. Thank you best regards &.

  Hi ALOK CHANDRA SINGH,.
  If none of these solutions will not help you check this thread.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.