Windows Mail reset / delete the contents of the folder when you restart

Similar Questions

• Error: "Windows could not complete the format" when you try to write to blank DVDs

  I get this error when you try to copy files to a blank DVD.  I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message.  Then the drive no longer recognizes blank dvd inside.  I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata.  I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved.  I think that the report mentioned that the reader could recognize not writable or something to that extent.  The player can play DVDs fine, however.  Is there a solution to this problem by replacing the dvd ram drive?

  Hello

  Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
  speed or mastered format. Have you added any burning new software lately - these tend to compete
  for resources and can interfere with each other.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  ====================================

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you can write on the outside edge.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• The bottom of my windows are obscured by the taskbar when you maximize their

  I have windows 7 and recently, the taskbar has begun to obscure the bottom of my windows, for example, when an excel document is opened and maximized, you can't access the different worksheets because they are hidden behind the taskbar.  I don't know happened.  I tried to solve this problem with auto-hide task bar settings, but found this very annoying that this means that I do not see my taskbar or it keeps popping up or endangered, which is annoying.  I don't want to restore my computer earlier if possible.  Y at - it a simple explanation of the non-geek I can follow easilly on how to solve this problem, because I find it so boring.  Thank you

  Thanks to all who responded, solve the problem himself after that I stopped my lap top and restarted again.  The reason that I had which was earlier that it will turn off no matter how many times I tried to stop.  So I finally just kept my finger on the power switch until it finally stopped and now I don't have a problem with windows optimize behind the taskbar.  Very happy.

• Computer will not use the drive when you restart.

  I have a Pavilion dv 9000 and had problems more and more lately (win explorer fails, application launcher fail, blue screens, crashes etc.).

  I decided to use the recovery disk that was created at first boot. According to all the manuals that I found (on - and offline), it is just to put the recovery disk in the DVD-ROM and restart.

  The problem is that nothing happens. The computer does not use the disk when it reboots.

  Anyone experienced the same problem with the recovery disk?

  I'm not having any other problems with the ROM, works perfektly once Windows is running.

  Thank you

  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Email of the day before being removed or deleted from the Inbox when you restart?

  Emails from my previous day's class 'abducted' of the 'box '. They do not appear in the "Deleted" folder or in the windows 'Recycle Bin '. I use a desktop computer & any other device. I have checked and re - check on the internet and nothing doesn't seem to refer to the problem. I'm a surfer of money with a little savvy & unafraid of have-a-go to any help anyone can offer. Thank you in advance.

  First option

  View menu > discussions > all

• Product key for Windows 7 loaded on the computer when you purchase

  I have a HP desktop computer that came with Windows 7 loaded on this subject.  I'm now trying to upgrade to Windows 10, but he wants a product key I've ever had.  How can I find the product key so that I can upgrade to Windows 10?

  IMPORTANT: To upgrade for free, select upgrade this PC now in the tool. One should NOT ask for a product key during the upgrade process. If you create a USB stick and use it to install, be sure to remove the USB key as soon as the installation program starts. If you do not, you may be prompted for a product key. In this case, remove the USB and reboot your PC to continue the installation.
  Use the download tool to create ISO support to update your windows.
  http://www.Microsoft.com/en-us/software-download/Windows10

  The media authoring tool can be used to upgrade your current PC to Windows 10 or to create a USB or DVD and install 10 Windows on another PC.

• HP Jet 13: could not get the usable screen after you enter the password when you restart

  After reboot I get the standard wallpaper (like the rings of Saturn), hour, day, week, month, and day, wifi bars and battery.  After the press, I have the icon pushing, my name, email and password.  By entering the password I get the points surrounding white and WELCOME, then by default in the screen with only sûr white pointer visiible.

  That's all new laptop from Amazon and seemed to work well until I have intalled the Office 365 online.  Then I started to get warnings from McAfee on bad files 'try to start', then the blank screen even during reboot.

  Please let me how to restore my system or to whom to return it.

  Thank you

  The model / sn numbers are tiny, but can be: model 13-c010nr sn 5CD50311MZ

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K

• Adding Windows Mail & account deletion

  Looking to add a new account in Windows Mail and delete the original account because it has not been used for 4 years, all e-mails are keen to be kept somewhere. Is anyway to do this?

  Hello

  Thanks for posting your query in the Microsoft Community Forums!

  It seems you need to add a new account with Windows Mail on windows vista. We're here to help and guide you in the right direction.

  I suggest you to consult the online Help article and check if it helps.

  Add or remove a Windows Mail account

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  For your reference:

  Working with Windows Mail in Windows Vista

  http://Windows.Microsoft.com/en-in/Windows-Vista/working-with-Windows-Mail

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• ADF: How to get the path of the file when you use component InputFile

  Hi all

  I use jdeveloper 11.1.1.5.0 version.

  in my case, I created program Mail Client mail where I used the ADF InputFile component for attach file mail.

  but problem is this return path only component InputFile from the file (only the filename get)

  and in my mailer class DataSource uses the full path name of file access.

  UploadedFile uploadfile=(UploadedFile) actionEvent.getNewValue();
       String fname= uploadfile.getFilename();//this line only get file name.
  

  so, how can I get the full path using adf InputFile component or any other way to respond to my request.

  Thank you

  Manish

  Try this (I did not, so I can't promise it will work):

  MimeBodyPart messageBodyPart = new MimeBodyPart(uploadFile.getInputStream());
  messageBodyPart .setFileName(uploadFile.getFilename());
  messageBodyPart.setContent(multipart);
  

  It does use the inputStream from the downloaded file as the content of the file attached. You shouldn't need a full path, since you're not going to use a file object to provide the content.  And it shouldn't be necessary to define the DataHandler.

  But if that doesn't work, I go back to my first answer.  Use uploadFile.getInputStream () to get the inputStream from the downloaded file, create an outputStream to write the file to the file system of the application server.  Then you have a file with a known path that you can subscribe to the DataHandler.  You can delete the file when you're done with him.

• Cannot send mail with windows mail. Get the pop-up Windows security.

  Cannot send mail with Windows Mail. Get the pop-up Windows security.

  Password and username are all correct. POP and SMTP everything is correct. If I remove all virus blocker, always get Windows security pop up asking for password and username; I type in it and click on the option to remember, but the window appears several times without sending a message. Error message box is empty.

  No problem on the end of e-mail servers. Equipped with Windows Vista.

  I deleted the Windows Mail disabled account, rebooted with the new account and the same problem.

  Can I receive the mail, but Windows Security blocking my attempts to send and don't remember the password and username that I type.

  Help!

  This kind of behavior is very often due to antivirus.  You are using.  If its McAfee or Norton get rid of them completely.   There are others who are also incompatible.  Everything you try, make sure that the analysis of e-mail is disabled.   You can also try to repair the database and see if that helps (see www.oehelp.com/WMUtil/).  And see also www.oehelp.com/OETips.aspx#3

  Steve

• When I log into Windows Live Mail I get the following message: "you have unsent messages in your Outbox. You want to send them now? Yes or no"

  When I log into Windows Live Mail I get the following message: "you have unsent messages in your Outbox. You want to send them now? Yes or no,"that does this every time as I have disconnect. I look in my Outbox and there aren't waiting for messages. How can I get rid of this pop up?

  Hi LarryMorton,

  Thanks for posting your question in the Forum of the Microsoft answers Site. Your question would be better addressed by experts in the in Forum Windows Live Mail. Please repost your question here,

• Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. »

  Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. "It looks like a real message of Windows but when I click on the link"Get help from communities", it does not work. I cancel or close the message, because I fear that the message can be fake and won't open my computer for a virus or worse. Anyone has any info on this particular message? I can't find anything in the help section of Windows. Thank you.

  original title: compaction of the database messages

  Hi Kathy,

  Please click on the orange button at the top of this page that will help you find the right forum for your problem in ads.

  Mike

• How to format a 8 GB SD card? (Windows XP) (ie. delete the already recorded videos)

  Windows XP formatting
  How to format a 8 GB SD card? (Windows XP) (ie. delete the already recorded videos)

  Best bet... map format the SD card in your camera.
  Or... you can delete the files using the menu of the device.

  Or... If you can go to... Start / my computer... and
  the camera (connected by USB cable) or your
  the media player is recognized as a removable
  Drive... just right click on the drive letter and select
  Open or explore to display the directory of the
  SD card. Reach... Edition / select all / drop / delete.

• All of my Windows Mail subfolders and the emails contained in disappeared mysteriously.

  original title: Windows Mail lost all subfolders

  All of my Windows Mail subfolders and the emails contained in disappeared mysteriously.  I closed Windows Mail with all folders and opening Windows Mail again the next day, only the default folders (Inbox, sent, etc.) were present.

  I created a new folder named "Test" that I can see has been saved in "C:\Users\San\AppData\Local\Microsoft\Windows Mail\Local Folders" as well as other folders by default, but I can find no trace of my 20 folders + that I had previously.

  Help!

  Nobody knows what could have happened and if they might be elsewhere on the HARD drive?  I have run several searches looking for folder names, but so far have developed in white.

  Any help would be greatly appreciated.  Thank you.

  Open your Windows Mail, under local folders, Inbox. Yes?
  Is there a pointer to this Inbox?
  If so, click it.
  See my link to the screenshot:
  http://public.Bay.livefilestore.com/y1phMGm5qIeGuRY_L_Wj7go7Dt5SkzKh72l76uUxsmTRaL-YEWbMNpeEnABo26hO6u1f9YHWpfWp8Ud6qg3yHR2pg/pointer.PNG

  Are your 'subfolders' back on now?

  t-4-2

• Can I reduce Windows mail icon in the system tray?

  Can I reduce Windows mail icon in the system tray? As Windows live mail.

  Use the Windows Mail Minimizer tool

  http://windowsmailminimizer.Hoha.ru

  Found here:

  http://Forum.oszone.NET/showthread.php?p=1423310#post1423310