Windows on Ideapad Y510P ExpressCache question - gel Constant 8.1

Similar Questions

• IdeaPad y510p clean Windows 7 install - SSD not detected

  I bought a new Ideapad y510p just before Christmas and I wanted to do a clean install of Windows 7-64 bit.

  I created a USB startup device as required and put the drivers from lenovo on her page too.

  My problem is: after you delete the partitions, the installer of windows 7 do not recognize the SSD more...
  My BIOS is set with legacy of disabled secure boot support.

  Furthermore, when it came to load the drivers, it says no driver signed device not found.

  Someone has an idea of what's going on?

  Hi Clet,

  Since the serial number on this picture, you have the 59375625 model. After digging further, this parts search page and this point merchant does not seem an SSD on the specifications list. If the reception / box indicates that you have a 1 TB + 24 GB SSD, you may need to check under the hood (see pages 38-39 of the hardware maintenance manual)

  Link to photo

  Concerning

• Install Windows 7 on a laptop IdeaPad Y510p of Windows 8

  My friend just got his new laptop IdeaPad Y510p today, but as he doesn't like Windows 8, I gave her a Windows 7 disc to put on instead (as I know the drive works, as I used it twice before on two different computers). Shut down the computer, put in the disc and went to the bios to change the boot order. Windows 7 download, but when it gets to the startup screen that says "Starting Windows" with three red, yellow and blue balls, he runs for a second, but then freezes and does nothing after that. He tried to restart the computer, but it still does the same thing. He also tried by pressing the button on the side of the computer recovery, but this does not, either. What should we do?

  Hi cheyenne1433,

  Thanks for posting and welcome to the community. Based on what you have posted here, you must change the Startup Mode in the BIOS. I'm here for WOOD > "STARTUP" tab > and change the Startup Mode for Legacy Support. Then save the settings and try to reinstall the operating system again...

  I hope this helps.

  Let me know how it goes.

  Concerning

• Lenovo ideapad y510p boot on CD/DVD

  Hello

  Just had the laptop y510p and I am trying to install Ubuntu, so I have this DVD bootable and I wanted to try out Ubuntu before you install as usual, but I can't get the laptop to bot on dvd. On the start menu options, there are only EFI and a kind of network options but not dvd.

  I tried following the instructions here, but regardless of how many times I press F1 during boot, I can't start menu and windows starts directly:

  http://support.Lenovo.com/en_CY/downloads/detail.page?docid=HT036814

  Is it not possible to boot on dvd. The dvd is supposedly compatible with EFI and secure boot ubuntu 13.10.

  I don't understand why there is no option to rearrange devices to boot on my old PC.

  I managed to get the BIOS configuration by pressing the restart and Maj and then selecting settings UEFI firmware and I chance to the configurations of the bios, but still no way to find the option to start on a dvd.

  Any advice? Thank you

  I managed to install ubuntu, the problem is that my cd is defective, here's a blog where I wrote about the steps

  in the case, someone must:

  http://vaxapp.WordPress.com/2014/02/09/install-Ubuntu-12-04-3-on-a-Lenovo-IdeaPad-y510p/

  I found a lot of answers here:

  http://AskUbuntu.com/questions/221835/installing-Ubuntu-on-a-pre-installed-Windows-8-64-bit-system-u...

  Although for Windows 7 the problem is perhaps that he does not support UEFI and or secure boot?

  In windows 8 type ctr + C then the power button, then press Caps + restart and then chose the option help out and something UEFI and you will restart in the bios, then you can change the settings to disable secure boot and/or inherited instead of the UEFI boot.

  When you press F12 is the start menu, but you won't see that entries that are UEFI-compatible (if you are using the UEFI) either CD or USB

• Lenovo Ideapad y510p - memory upgrade

  So since Christmas is coming, I thought it would be cool to upgrade my 8 GB RAm 16 GB my question is: what type of card Gerard, I need my lenovo ideapad y510p? and what I have to change my old memory card aswell if im buying a new?

  Also is it easy to change the RAM cards?

  The worst thing that can happen is that memory does not work with full 1866MTs, but it will certainly work.

  The first is a 2.5 "drive, so you should replace your hard drive with it. The other works, but not as a cache. If you do not want to buy a form mSATA SSD, it is best to install the top OS. Kingston is not the best brand when it comes of SSD. Discover Crucial, Samsung, Plextor. It would be a good idea to read some current reviews and comparisons of the SSD. always keep the highest priority on reliability.

• Lenovo ideapad Y510P what kind of hard drive is this?

  Hi people,

  I have a question. Today I want to defragment my Ideapad Y510P, but I don't know why I have 5 stations of hard drive? What type of disc is \\?\Volume{3db4... (see photo)

  

  Gamenick wrote:
  But that disk station is fragmented by 29%, it does not matter?

  As noted that the partition has been created by the operating system. I don't know what (probably for recovery). Since there is a schedule for Defrag I think it will be supported by the system when the time comes. So I just deal with C and D and leave the others alone. The other two partitions should be used by OKR.

• configuration problem IdeaPad Y510p sleep

  About 2 weeks ago, I bought a Lenovo ideapad y510p laptop with graphics 750 m SLI. The first thing I did was to remove the excess of bloatware that comes with the laptop and have had a very positive experience with the machine together.

  Recently, I noticed if I let my laptop idle, he spends in sleep mode pretty quickly. I tried to adjust the Power Options in the control panel to allow the computer to stay awake for as long as an hour plugged and 15 minutes on the battery, but the laptop still go to sleep after having been slowed for only 60 seconds. In troubleshooting, I tried to re - download management utility of the energy that the laptop comes with, but still, he goes into sleep in about 60 seconds. I tried to update my video drivers too, but my computer tells me that they are currently up-to-date.

  I'm not sure what I should try, but if someone else has a suggestion, I'd be happy to give it a try.

  Thanks in advance,

  Jason sheets

  Apparently my problem disappeared!

  It is dificult for me indicate exactly what measures or combination of steps worked for me, but after selecting the option 'balanced' in the power settings and adjust that power to my taste options, my cell phone is always placed in standby mode after one minute ("sleep" mode had been established at 30 minutes). I have re-uploaded Lenovos "Energy management" utility and set the settings to my liking and also installed a windows update. After a system reset, it seems that I have total control over my settings of power once more!

  I don't know if the solution lies in the update of windows, the system restarts or management utility power, but one or more of the following has solved my problem. I hope someone out there finds this helpful thread!

  Thank you very much

  Jason

• TPM on Ideapad y510P?

  I feel silly even asking this question, but I wonder - is it possible to activate the TPM on an Ideapad y510P with a upgraded BIOS or don't chip that comes with the 510 simply not supported TPM?

  Thank you.

  Hi jetboy2k

  According to all PDFs of this model, I don't think that it has a function to use the TPM.

  However, this thread can help,

  http://forums.Lenovo.com/T5/Lenovo-3000-and-Valueline/H520-TPM-BitLocker/m-p/1237517/highlight/true#...

  Concerning

  Solid Cruver

• Replace hard drive SSD in IdeaPad y510p

  Hi all

  I've had the IdeaPad y510p for a while now. This is the model with dual graphics, 16 GB of RAM and 1 TB HDD + 24GB SSD combo. (If you need me to be more precise, let me know). The 5400 hard drive RPM was slow this machine and I recently bought a 512 GB SSDS.

  Is this compatible with the laptop? Of my little knowledge of hard drives, I assumed it was and picked it up.

  Also, how I go on my PC cloning so that everything can be copied on the SSD drive, including start-up and all files and recovery partitions.

  And one last thing. Is the separate 24 GB SSD or the part the 1 TB HARD drive... in other words, can I keep the secondary, more small SSD in as well?

  Thanks in advance!

  
  

• IdeaPad Y510p lights.

  I have recently bought an ideapad y510p from newegg a few days ago. I tried to put in place and all that, try to get rid of programs that came preloaded with the laptop because I don't think that I would need them. I then close, put it down and open again and now it won't turn. It seems that both the power light and the battery are both, as well as the power light, but the screen itself is empty and I can't hear the computer being on. I tried holding down the power button / stop and resetting, as well as the battery and using only the AC to see if things were going to turn on but nothing works. I'm worried I might have deleted something important, but I was especially removal programs related to media players of poor quality and other similar services. It is quite upsetting I just got this laptop and he already died on me!

  I tried this procedure, nothing happened. For some strange reason when I press on and hold the power button, the light if turned off but just because I have my finger light is switched on immediately.

  I'll take the initiative and move forward to send it to lenovo for repair. It is covered by the warranty, so I'm more worried that I am pained and frustrated by the situation.

• KB890830 Windows Malicious Software Removal Tool - v3.21 arrives at c:windows\system32\EhstorShell.dll and stops (gel).

  I try to run the version of July of the software removal tool KB890830 windows malware - v3.21 and gets c:windows\system32\EhstorShell.dll and stops (gel).  Is malware or virus?  The computer says I need permission to remove and will not delete what I can do?

  Hello

  Try the methods and check if that helps

  Method 1:

  Firstly uninstall the malicious Update Removal Tool KB890830 completely from your computer. To uninstall the update follow the link below.

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  
  Method 2:

  Once you have uninstalled the update do Windows Update (with the exception mentioned) to your computer and check if the updates with the exception of the above mentioned are installed and applied without any problem.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  
  Method 3:

  Restart the computer after installing the updates and check if the computer works fine. Now install the malicious Removal Tool KB890830 update and what's happening. Try to install the stand-alone package for the same thing. Follow the link to download the standalone pack for the same thing.

• Expresscache gel/hanging Windows 8.1 - Y510P

  Hi guys, I got my Y510P Monday and performed as expected. But winning 8.1 would often freeze, hang, even on the screen restart and stop, where I had to stop manually. I found that uninstalling expresscache seems to have solved the crash / freeze... I tried to uninstall, delete my drive cache and re-install with the latest version of expresscache, but still the same problem. To uninstall. Is it a thing of compatibility with win 8.1 or a hardware problem? I run Seatools and the SSD meets all the requirements EXCEPT long credits. Although SSDLIFE said that it is in perfect condition and it should be good until 2022.

  
  

• IdeaPad Y510P RAM problem.

  I have a Y510p ideapad. I get windows errors MEMORY_MANAGEMENT bsod specially. I'm changing my strips of memory and I don't know what kind of ram will take the system. I discovered that the first DDR3L RAM are installed inside. I want to know is the system will take DDR3 RAM or not instead of DDR3L RAM.

  harrysane wrote:

  I have a Y510p ideapad. I get windows errors MEMORY_MANAGEMENT bsod specially. I'm changing my strips of memory and I don't know what kind of ram will take the system. I discovered that the first DDR3L RAM are installed inside. I want to know is the system will take DDR3 RAM or not instead of DDR3L RAM.

  For the bsod problem try to start windows memory diagnostic tool. This is based on your expanded it is a memory problem.

  For the question, determine you the processor model number and look up (plug) in site Intels. You should see other features of the type of memory to use (if DDR3L or DDR3) for a good game.

  Update:

  Here's how to run diagnostics: simply click the circled option shown after you type memory in the search box.

  

  Assuming you have I7-4700MQ, this will be the result in the Intel Web site:

  

  From there, the answer to your question is NO, you cannot use DDR3. You can use only the DDR3L 1333 or 1600 Dual channel No. ECC memory support.

• IdeaPad y510p synaptics cannot be removed.

  Hello I have a y510p Ideapad with synaptics I want to install newset version Synaptics driver but when I try to uninstall the old driver it keep longer display this message:

  You must have administrator privileges to uninstall device driver
  
  My connected account's administrator

  and I use Windows 8 pro.

  I removed in safe mode.

• Free Windows 7 Upgrade Clean install questions

  Hi, I have recently buy a Mini 5101 it comes with XP Pro and Vista Business... I currently have Vista Business installed on it. I wonder about the process of upgrading to windows 7. On the free upgrade Web site it is said that the operating system can be upgraded to windows 7, according to the weather, I have vista (upgrade straigh) or xp (must be a stable cleaning). Now, my question is can I perform a clean installation with this upgrade? I know that normally you can perform a clean install via the insertion of the disc of the previous operating system media during installation, but as the Min 5101 is a netbook (no cd drive) I will probably install it via a USB key. It is very important for me to have a clean install.

  On the upgrade Web site, it says that if you are using XP pro, you must perform a clean installation. It would be better for me to install XP now order the update, and then install Vista so that I can get the version that will allow me to perform a clean installation - or I'd get the same disc anyway?

  I know the installation disc doesn't have not yet been outside and not so should know the process entirely. Kind of hope that someone will have knowledge on this subject.

  The installation media will allow you to perform a clean installation 'upgrade' using product key of the current operating system during installation. This allows him to check that you are upgrading from a previous version of Windows.