Windows says Windows 8 phone not owned not even if she connected

Similar Questions

• validateforMosaic says 'BAND DIMENSION SIZES NOT EVEN' with all the 1 - Sun

  11 GR 1 material
  
  I have SDO_GEORASTER with
  1 pixel = 1 byte
  I can display them with Oracle GeoRasterViewer correctly.
  
  On validation the front to create a mosaic, oracle says: "BAND DIMENSION SIZES NOT EVEN."
  
  I also SDO_GEORASTER with
  1 pixel = 3 bytes
  I can create a mosaic of them without error.
  
  On the use
  sdo_geor.getBandDimSize (...)
  I see that all THE "1 pixel = 1 byte' georaster have exactly 1 dimension. So the message "BAND DIMENSION SIZES NOT EVEN" seems not to be accurate.
  
  sdo_geor. Mosaic (... does not, ora-13419 "can not... Please check the documentation...")

  Could you please help do a few checks most common sense:

  -need to ensure that all frames are valid for the sense of validateForMosaic
  Select count (*) in georaster_table
  where sdo_geor.validateGeoRaster (georaster)! = 'TRUE' and
  sdo_geor.validateGeoRaster (georaster)! = 'NULL ';

  Select count (*) from (select georid, sdo_geor.getBandDimSize (georaster) numberOfBands
  of georaster_table t
  where sdo_geor.getBandDimSize (georaster)! = 1) ;
  /

  Thank you
  Jeffrey

• Windows Vista does not start! She's just a beep constint

  I tried to boot up my laptop today she would get windows to load part and stop at halfway, then it would start to beep! It happened once before.  When it happened the first time I had a little bit of a hard time getting it going. what I did restart a few times and everytime I would try to start it up in a different way, what works is committed to F11, it would bring me as far as saying that if I wanted to do a retore system I have to load windows normally and go from there...

  Once I saw that then I knew that my computer was working normally. only because I could not get to that point where I started to see this problem. Before that happened that I kept getting a msg error saying something along the lines of dll.temp file was not found and could not load. I did some research and found that it was a virus in my laptop, so I downloaded microsoft security databases, and who had managed to get rid of the error of dll and windows is not able to start up, when I had installed microsoft essentials I have nortan and he said I need to uninstall it.

  2 days after that I decided to reistall nortan that I had the same problem as before I knew where I was unable to boot windows... not the dll error, so I could have, I was able to start... I tried again start mode without failure, but as soon as I hit F11, it attempted to load and then I get that continuies beep, I tried everything that I can get in F! F2 F6 F8 F10 F11 but as soon as the incarnations came load it beeps...

  I have a disc or anything like that. I don't have one with the computer. I can't find a site that has a program that can be downloaded... I am at my wits end with this and am ready to throw my laptop in the trash...

  Any information would be greatly apprieciated

  Lindsay F

  Fix the material.

  In any case, to re - install you'll need a DVD for Windows Vista - so you will have to track that.  Contact the OEM (manufacturer of the system) to see if you can get a (probably buy) on their part.

• Impossible to connect the printer to the laptop with a wi - fi connection and get a message saying "print spooler does not", even though troubleshooting it says that it is fixed.

  Problems to connect a printer to my lap top using a wi - fi connection and get a message saying "print spooler not working do not ', even though troubleshooting it says it is fixed, any ideas please?

  Original title: install a printer

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Click Start, type: services , then press on enter on your keyboard

  3. Double-click Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. Right click on the print spooler service, and then click Properties.

  5. On the general tab, next to startup type, make sure that automatic is selected.

  6. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• Computer laptop Windows 7 can not find wireless network connections

  My Samsung RV510's laptop had windows 7 on front and without wire worked but recently my hard drive for this laptop broke and I had to get a new HARD drive. Now I have a new one that I installed windows 7 on it and now it cannot find wireless network connections even if there is a broadband router in the same room as the laptop. When I try to connect to a wireless network, the computer does not find.

  You have turned on WiFi?  Have you checked Device Manager to see if your wireless network card has a driver?  The different procedure for Urning edited that WiFi on East and model, so you for each brand will have to read your user guide - I promise he won't give you the leprosy!  :-)  To check the driver, click Start and right click on computer, then click Properties.  Click on Device Manager and look for the entry that says that the network cards.  Click the arrow to the left and look to see if

  There is a! or? next to him.  If so, you must download the driver appropriate from your manufacturer.

  Good luck.

• System Restore does not work in windows 7? not even in administrator mode

  WINDOWS 7 IS MY OS. AM NOT ABLE TO RUN THE SYSTEM RESTORE. HE IS THERE A NO RESPONSE AFTER I SELECTED THE SYSTEM RESTORE SEVERAL TIMES.

  Sushant salvation,

  To help you better, please answer these questions.

  1 you get a specific error message?

  2. you try to restore the computer to an earlier time?

  3. you try to create a restore point?

  4 did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem.

  Method 1: Try to perform a system restore, safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are able to perform the system restore in safe mode, I suggest you perform the clean boot and check that there could be some third-party application that may be causing the problem.

  Step 2:

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 of the link to start the computer to a Normal startup mode.

  Important: If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point, if any.

  Undo system restore

  http://Windows.Microsoft.com/en-in/Windows7/undo-system-restore

  Method 2

  You can also try temporarily disabling computer security software and check if it makes a difference. If the system restore works fine after you turn off the anti-virus, you can contact the manufacturer of security software and check if you need to change the settings

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, perform the restore from Winre system.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help you.

• Windows 7 do not discover the devices connected to the DLNA network running wireless

  I have three devices wirleless, IPAD, Tablet, SONY Blue Ray home theater, not able to see the Windows 7 PC. I'm under Media Server 12 and I put it in place in a home group and sharing. My other Windows 7 PCs can see the device. It worked before but has stopped working.

  I tried to restore to an earlier date. I tried to uninstall and install Media Player from the windows features. Nothing has worked.

  Any suggestions are appreciated

  Fixed a problem. The Fios router was the problem.

  Connect to the router, Advanced-> Yes-> IPMG Proxy - Set Proxy IGMP (on/off): to turn off and save. See the link below.

  http://forums.Verizon.com/T5/FiOS-Internet/Actiontec-MI424WR-DLNA-problems/TD-p/452389/page/2

• I have a HP tc4400 with windows 7 but not even pressure sensitivity with what I think is the right driver, why are there no pressure sensitivity?

  I am currently using windows 7 Ultimate edition with a HP compaq tc4400. After a clean install, I am able to use my stylus but there is no pressure sensitivity which causes problems with photoshop and paint tool sai and other programs that use the pressure sensitivity. I am currently using windows vista driver called "Minidriver Wacom digitizer" I saw that others of the same type of computer works just fine and it is normally pressure sensitivity... I'm curious to know if I installed the wrong driver, or if there is something wrong with the installation.

  Hello

  I suggest you to please contact the HP support for assistance.

  Link to download the drivers: Drivers HP for Tablet PC tc4400

  Contact HP Support: HP Support

  I hope this helps!

• Windows 10 will not even begin to download

  I have Windows 7 right now, have already uninstalled the antivirus I had on here and tried again, but I click the upgrade now and all I get is the blue window with the twirling button.  She did it for 12 hours now!  I put last night and got up to anything this morning!  Any ideas?

  If you can't get Windows 10 to get 10 app windows or Windows update, you always have the option of ISO to upgrade.

  Download Windows 10 media creation tool

  Simply select this option of PC/improvement.

  After you download the Windows 10 installation files using this tool, you can upgrade your existing 10 Windows operating system, or you can create the bootable USB drive or DVD to install Windows 10 key later. You can also save the installation files to the ISO in offline mode file format, if you wish.

  

• No menu 'File', available in Windows Live Mail; not even a taskbar in order

  In a previous answer: "then in WLM file-import-Messages-Outlook Express 6 and place you in the folder you all the dbx files to." when I open Windows Live Mail, I don't have the command bar typical with choices or menus as "File",""Edit","View", etc. Where can I find the menu that will take me to the "import"? Thank you.

  Press the ALT key to see the menu bar.  Press ALT + F to open the file menu. Boulder computer Maven
  Most Microsoft Valuable Professional

• Hello. I have updated my OS from Windows 8 to 10 of Windows. Now, not even one of the sofware CC went, someone tell me how to fix ork more (I use PS, ID and AI). I ve tried to delete the end of charging, but it does not help.

  Could someone tell me how to solve the problem? Does anyone else have the same problem eperinced?

  Moving to Illustrator

• Family safety on Windows 7 has completely stopped working, even if she pretends to be on

  Help, please!  The Windows Live Family Safety filter worked well on two of my computers for a few months.  All of a sudden it does not filter anything, well that Family Safety site shows that the filter is activated and the work for each account.  I tried to turn it works, change settings, updating / refreshing the filter, etc., and it did not help.  I discovered and removed a Trojan horse (win32/Neop! gmb) and some adware (win32/BetterSurf) that were on my computer.  Then I tried to uninstall the filter of parental control on both computers, closing my account of the safety of the family and he put everything back in place from scratch.  That does not help either.  The filter will still let us get any site and see adult pictures or videos, even if the filter says it is on and functioning "normally."  I don't know what else to try.

  I heard this on another post, and it WORKED for me also!  I logged on my account live.com and udated my name in my profile.  I don't know if that it or if MS has solved something but I can not connect on fss.live.com.  Please share and please post if it worked or not.

• Windows 8 does not recognize my Canon Vixia HV40 by fire wire. Help!

  Hey guys,.

  I'm having a problem with trying to capture video from my Canon Vixia HV40 and do it on Adobe Premiere Pro CS6.

  I think that the main problem is that my laptop (running Windows 8) does not even recognize my camera using a fire wire.

  I've linked download these drivers and nothing works. Can someone help me please?

  I use fire wire that turns a USB port, if that tells you anything.

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  Let me try and help you with the problem.

  1. you try connecting the camera for the first time on your computer?

  2. have you made sure the Firewire cable is working correctly?

  3. What is the status of the camera in Device Manager when you connect?

  To open Device Manager, press the key Windows key + X and choose Device Manager.

  In Device Manager, check if the camera is recognized.

  If the camera is not recognized, you may need to check the issue by using a different firewire cable.

  I also suggest you to run the hardware troubleshooter and check if that helps.

  1. Point to the upper right of the screen and then move the pointer of the mouse to the bottom and click on search.

  2. Enter Troubleshooting in the search box, type or click Troubleshooting, and then click hardware and sound.

  3. Click hardware and devicesand follow the instructions on the screen.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Windows 8 is not grateful TV connected via HDMI

  Original title: ask the community

  Windows 8 is not recognize my TV like a 2nd screen. I use HDMI wired between the desk and TV. I completed all the steps in 'view' in the control panel. VGA is a choice HDMI here, no?  I clicked on currencies-2nd screen and extend. TV is set to HDMI 1.  What Miss me? Help!...

  Mark,

  Please go through the information provided in http://windows.microsoft.com/en-IN/windows7/work-and-play-better-with-multiple-monitors

  Browse the information in http://answers.microsoft.com/en-us/windows/forum/windows_vista-pictures/no-signal-on-tv-when-connected-pc-to-it-using-hdmi/2168c897-a7bd-4420-b4c8-2a4b10e90ccf

  Note: the above links are for Windows 7, but the procedure does not work for Windows 8.

  You can even try to connect the TV using a VGA cable and check if that helps. (Just a work around to check if the TV receives the signal)

  Through the properties of Nvidia and go in the control settings and check the display options and check if the TV is displayed.

  Let us know the results.

• Samsung mobile phone - photo - says phone not connected - studio think that it is a Windows problem

  Trying to transfer photos from mobile phone Samsung D600.  Drive installed Samsung PC Studio 3.0.  It is good, but says "phone not connected" tried with Bluetooth but makes no difference.  The Assistant said that the two devices are connected.  Don't know what else to do. Any help much appreciated.

  Hi RubytuesdayTD,

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  ·         What service pack is installed on your computer?

  You can run the Microsoft Fixit of the article mentioned below and check if the device is detected.

   

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Let us know if that helps.