Windows Update (7) don't get anny uppdates

Similar Questions

• I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE

  • I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE.   THIS HAPPENED SEVERAL WEEKS
  • THANK YOU, MARK SZYMANSKI
    

  Hi Mark,

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. is the specific question for the individual or all of the updates?

  2. did you of recent changes made to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Manually install the update from the link below.

   

  Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:

  http://support.Microsoft.com/kb/2761494

   

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium

  Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium

  Hello!

  the mechanic system?
  It's what has helped us to

  Open Notepad.

  Copy the following into Notepad and save it as fixme.reg

     push all the files and then save it to your desktop.

  Windows Registry Editor Version 5.00

   

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]

  'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.

  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.

  00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00

  'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" = dword:00000003

  'Type' = dword:00000010

  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.

  74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.

  00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.

  6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.

  73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.

  00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.

  65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.

  00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.

  00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.

  00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.

  69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.

  66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.

  00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.

  6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.

  47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.

  00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.

  72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.

  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.

  73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.

  51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.

  00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.

  00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.

  50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,

  00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.

  76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.

  00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.

  00.00

  "FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00

  Go to your desktop and double-click the file name fixme.reg

  Restart the PC and try to install the updates again

  or

  Click Start.

  Type regedit in the search field and press to enter.

  On the registry change windows click on file and select import.

  Navigate to the location where the fixme.reg file and select the file.

  Click ok on the windows screen once the registry is merged successfully.

  Restart computer and check if updates installs.

  * We had system mechanic and I uninstalled it since I discovered that it corrupted my windows installer.

  Hope this helps

  Microsoft KB article

  http://support.Microsoft.com/kb/2642495

  Thank you!

  Makoi

• try to install windows update (kb971737), but I get the error

  whenever I try to install this update I get error 80070020, I tried all (safe mode with network-clean boot-dissabeling antivirus and firewall, manual installation) nothing worked
  My os: win vista ultimate sp2 64-bit
  anti-virus: norton 360 v2 + windows deffender

  Yes, I use ie8 you think if I UPGRDE TO NORTON 360 V3 COULD SOLVE this?

  If you have installed (no upgrade to) N360 2010 v3.0, IE8 would be much more effective for you, but I suspect that this will not to solve the problem you experienced when you try to install KB971737, don't.

  Here's what you could try though:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (for example, navigation; read E-mail; cat download other stuff) until you have completed step #8 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. While N360 is no longer present on the computer, see if you can install KB971737 (and offered security critical updates) now.

  7. now, to do a clean install of N360 2010 (using your product ID, if necessary) & restart: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  8. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• DNS server error that always brings back us to windows update erros trying to get on the internet

  Vista - hate him. I spent hours on the phone with a brand new computer that Toshiba with Vista 64-bit Edition Internet will stop working with the DNS server unknownerror. Sometimes reboot help but with all Windows update he internet is a luxury. Internet connection is perfect, perfect bc other laptops in the House with no problem, router, no viruses etc., computer - fine tooth - comb nothing.

  Take each OFF download windows update and work until updates again and then started barking at me, something is missing like its updates! Can't very well what update is screwing the connection or networking or a framework-Silverlight is always suspcious to me also.

  My icon for internet splits in two and shows as a #2 without asking confirmation except for a mysterious update. Access: Local and Internet. Symbol of the Internet will be turned off and will not ever look like disconnected until you try to connect.

  That's why people are going to Apple. Windows will not help or is somewhere secret and accept just your visa and mastercard and so what still you? Vista I can't update and no security.

  Toshiba is not very user-friendly, that is toward the back, they discovered Windows was the question. Isn't our problem, said - even if we're stuck with Vista with their product!

  I'd love to hear if someone has SIMILAR problems or if anything that I did not have tried! Thank you very much.

  Signed. Never buy new windows - toshiba on my list too.

  Hi begodsbutterfly,

  Welcome to the forum of answers windows vista.

  We are sorry for the inconvenience that you had to go through. I have some steps you can try to solve this problem.

  Try to check in SafeMode with Networking if the same problem occurs. To start in safe mode with network, restart your computer and press the F8 key for about four to five times. You will see the window options of safe mode with network in rated advanced. Use the arrows on your keyboard to select Safe mode, and then press ENTER.

  Please check if you get the error in safe mode with network.

  You can also try a system restore to the date when the computer was working fine.

  To do a system restore, please follow the steps below:

  1. click on start to reduce this includes this image, type systempropertiesprotection in the Search box and press ENTER.

  Reduce this includes this imaIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  2. in the System Properties dialog box, on the System Protection tab, click System Restore.

  3. in the System Restore dialog box, select choose a different restore point, and then click Next

  4. Select the restore point that you want to use, and then click Next.

  5 confirm your restore point and then click Finish System Restore restores the selected Windows Vista configuration and then restarts the computer.

  6 log in the computer. When the restoration of the system of confirmation page appears, click on OK.

  The system restore article is:

  http://support.Microsoft.com/kb/322756

  I hope this information is useful.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• Windows Update does not work, Get 0x8024400A error message.

  Hello everyone, update Windows displays the error message. Will not work. New installation of Windows XP Pro 32-bit. Get the 0x8024400A error message. Follow-up guests for Microsft fix it fix it but requires SP3? Cannot load it down. Also tried installing BITS, but failed. Any suggestions? Yet once it is a new installation of XP Pro. Thank you and Bravo.

  Original title: Windows Update woes

  See: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/did-a-clean-install-of-xp-pro-and-now-cannot-use/bb00e4ea-715f-4b70-b015-0621e9df8083

• After fighting a multitude of Trojans, viruses and spyware, I can't connect to Windows Update and don't worry I'm still infected!

  So I'm trying to save my dad's computer (and its files + settings) after that he was struck with a variety of bad guys: Alureon, FakeSysDef, Blacole, Gen-Nullo, difficulty system, etc..

  Has finally got the office programs and files back after the entire MBAM, TDSSKiller, SuperAntiSpyware, etc., of jazz, but STILL not get things all the way back to the normal and good scans with MSSE, MBAM and MS Security Scanner are clean, I am afraid that the computer is always infested with something or the other...  (mainly due to my inability to use / access Windows Update: receive the 0x800A0046 error code AND get it published (feat of Java Blacole) out of a Flash drive, I used my system between the two machines... stupid, I know)

  so, here are the details: Dell XPS: Windows XP Professional, Version 2002, Service Pack 3: seems to have been hit in early November that there is no fixes/updates after 11/14 or more.

  I told him years not to run multiple antivirus + spyware programs at the same time, but he ignored me consistently.  I have since completely uninstalled Norton (using their removal tool on a newly created user account, as I couldn't make it work on sound - both are admin ETCA) and Webroot and installed MSSE.  At one point he swindled with system security 2011 and from there installed PC Fix, difficulty system and any other fake antivirus, it can click.  When the first infestation (before everything went to sh * t) I was takled him thanks to a restoration system and scan... About a week later, he ignored previous orders on not clicking or not to install anything without calling me everything first and got the rest of them (see list above).

  This time, we could not access any program, web page, without failure, System Restore, its own user account, etc etc.  Somehow (with MBAM, TDSSKiller, etc) I entered the computer, installed process explorer, started the happy hunting and following 'view' & restore icons/programs/etc.  And yet we always face the dilemma of Windows Update, the loss of its sites Favorites/tabs, loss of / NO content in administrative tools (both through the control panel and Start Menu: file is empty when it is open) and inability to use the system restore.

  I found this thread ( http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/windows-update-not-working-ie8xphome-error/db7956c9-d77c-e011-9b4b-68b599b31bf5 ) in which the fellow was in THE SAME EXACT POSITION I'm NOW - for a tee - who said: "those who would be interested - this problem has been resolved by an engineer from climbing on the Team Support of Windows XP.  It was "Removing Group Policy" through a registry fix, "Reloading safety model" via several downloads and finally run a .bat file also downloaded. "So I guess I need help do the same.

  Can someone help me or offer any other advice or assistance to get this sorted out?  Thank you in advance for anything you can do!

  See you soon,.

  Katherine

  Hi Mike,.

  Yes, I tried all these steps without success...

  Buuuuut...

  I ended up calling the Microsoft's Technet support, which helped me to identify two registry entries that the horde of virus/trojan/rootkit had created changed, that I had not already taken AND finished the download of some clever little program (difficulty WU Utility I think?) which allowed me to reset + reregister the BITs, cryptographic, & System Restore services...  That did the trick (although, as far as I know; dear ol ' pop reported no problems at the moment ;-))

  Thank you Jeebus! Laughing out loud

  See you soon,.

  Katherine Parrick

• How can I fix Windows Update in order to get the error code 80070005, which prevents obtaining updates for Windows from my computer, I stop?

  Icon of the status bar indicates "Windows cannot check the updates.  When I try to manually check for updates, I get the error code 80070005.

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  http://support.Microsoft.com/kb/968003/en-us>

  UTC/GMT is 23:58 Saturday, December 8, 2012

• Windows updates fail, and I get a code of 80070005 error message.

  original title: Windows updates are faulty and I get a code of 80070005 error message.  I can't identify what it is.  Any help appreciated.

  This occurs with frequency more.

  Hello

  Error code 80070005 means generally that you're not quite allowed to install updates. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates.

  To resolve the problem follow the steps that are listed in the methods below in the order listed, starting with method 1.

  Method 1:

  Log the computer as an administrator or as a user with administrative rights.

  Method 2:

  One of the most common causes of this error code (access denied) is the Anti Virus and Anti Spyware software running on the computer. You can try to disable them, and then try the updates again.

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 3:

  Try to reset your default security settings.

  Reference:

  How to restore the security settings the default settings? : http://support.microsoft.com/kb/313222

  Method 4:

  Reset Windows Update components.

  See:

  How to reset the Windows Update components? : http://support.microsoft.com/kb/971058

• I did a restore of the system for Windows XP and I made updates to MS. I'm stuck now. I can't upgrade to SP3 and windows update doesn't work, get 0x8024400A error

  [Error number: 0x8024400A]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Hello

  Have you made changes on the computer before this problem?

  Follow the below methods:

  Method 1:

  Follow the below the article that says how to resolve error: 0x8024400A.

  http://support.Microsoft.com/kb/836941

  Method 2:

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Hope the above information is helpful.

• Windows update will not work or let me start the update program, get the Windows Update error cannot currently get "some updates because this service does not work"

  I moved and my computer is stuck off like 2 and a half months. Well, now I'm back on it, but for some reason any my Windows Update does not start. Whenever I go to him, he tells me that the program is not running and you may have to restart. I do and he said to me again and the same thing. So I went in my services to ensure that all programs, that depends on run works and he says even its operation. How can I fix it?

  Hello Nick,

  Here is a link where you can reset windows update components.

  http://go.Microsoft.com/?linkid=9665683

  Download the fix - it and run the fix - it.

  Please select the mode option run aggressive.

  Disable your anti-virus software.

  Restart the computer and verify if you are able to install the updates.

  Kind regards

  Sumanth.B.S

• I tried to do a Windows Update and I keep getting error 80070641 and 641 codes.

  Ive tried to do a Windows Update. 11 updates fail.
  I also tried to update Adobe Reader and it says that Windows Installer service could not be accessed. This can happen if windows install is not properly installed. I went through some forums support and found that the Windows Installer is not on my computer. I can't find the exact link to add it to my computer. I do not know why he is no longer on here. I've updated just find since I got the computer two years ago.
  I have Windows Vista Home Premium Service Pack 2.

  Any Suggestions for help?

  I suggest you follow the steps in the link below and check if it helps:

  How to resolve problems connecting to Windows Update or Microsoft Update

  >>

  UTC/GMT is 21:40 on Tuesday 5 June 2012

• Skype, windows live messenger and windows updates works don't suddenly not on vista 32-bit home premium

  I had this problem about 3 weeks ago, so I totally uninstalled vista and reinstalled-PERFECT.  Well, this problem is occuring again.windows udate gives me this message: code 1400.  Windows Live Messenger gives this message: the Application failed to initialize properly (0xc0000006).  Skype: Skype has stopped working a problem caused the blocking of the program works correctly.

  I did: Logfile of Trend Micro HijackThis v2.0.4

  Scan saved at 18:34:06, 02/03/2011

  Platform: Windows Vista SP2

  All suggestions/help, I'll listen and try.  Thanks, ChiPhaz

  Try to run the SFC system in accordance with these articles.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  If you encounter a problem with the Windows updates, you can try the tool Fixit of this article?

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  How to use the memory diagnostic tool in Vista
  http://www.Vistax64.com/tutorials/65361-memory-diagnostics-tool.html

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• Try to install Windows Update to Explorer and get the error code 9 48

  This is the update for Windows Vista - have run microsoft fix and still I get this error - unable to determine what error - is anyone know?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/when-installing-Microsoft-Update-for-Windows/7448c660-0a05-4496-be8f-188a382578f8

  Keine IRB, post twice.

  UTC/GMT is 16:25 Wednesday, May 23, 2012