Windows Update fails continually after February 9 release of updates being installed

Similar Questions

• Stop windows update to install Nvidia driver version 52.16

  Hello

  Recently, I upgraded the PC of my father to WinXP SP3. It is an old DELL Dimension of 11 years. After installation there is a nagging question that won't stop.

  Windows Update keeps trying to install the following:

  MICROSOFT VIDEO NVIDIA GEFORCE 4 MX 420

  NVIDIA driver version 52.16

  This update is not necessary for the monitor to run.

  So far, my difficulty was to start in safe mode and back the driver.

  Windows Update repeatedly installed this driver. I have

  detailed instructions on how to block this specific update to settle here.

  Thank you

  Dwayne Boyd

  To hide an update in Windows XP, just go to the Windows Update site and uncheck the update and click on the + sign next to it. At the bottom of the explanation expanded the update the checkbox to hide this update become active and can be selected, thus masking the update.

  Then, you need to remove the update from the temporary folder:

  Stop the automatic updates service

  Click Start, choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click on stop.
  Stopping the service will take a moment.

  Delete the content of the download folder
  Click Start. Choose run.
  In the run box, type %windir%\SoftwareDistribution
  Click OK.
  Open the download folder.
  Delete all the contents of the download folder.
  Close the window.

  Start the automatic updates service
  Click Start. Choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click Start.
  Starting the service will take a moment.

  By removing the contents of the download folder - you have removed all downloaded
  updates.

  Now, the next step would be to configure Windows Update in order to warn only rather than automatically download and install updates. In this way, you stay in control.

  http://support.Microsoft.com/kb/306525

  Click Start, click run, type sysdm.cpl, and then press ENTER.

  Click the automatic updates tab, and then click to select an Notify me but don't automatically download or install

  I hope this helps.

• Windows Update cannot install KB2656353

  Windows Update cannot install KB2656353 on my Windows XP Professional SP 3 machine.  I tried to update windows install to 4.5 & manually install the update, but the installation stops when someone asks me for the Microsoft .net Framework 1 (disc 1).  How to solve this problem?  Thank you.

  Hello

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow the steps.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article to reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Try to use Windows Update to install 2 updates, get "updates are not configured correctly. Restoration of the changes

  Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.

  Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
  After I then connect I get the message ' Windows to not install important updates.

  Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.

  I tried to do this several times on 2 days, but get same problem.

  This gives a shot.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]

  10. restart one last & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  =======================================
  WARNING: MS MVPs represent or work for Microsoft
  http://MVP.support.Microsoft.com/GP/mvpfaqs

• Windows Update crashes, install update 16 of 18

  Original title: windows machine update caused to hang

  The machine seems to have hung over the windows update process - the rest of the screen to "do not turn off or unplug your machine." Installation update 16 of 18. At this point, he remained for over half an hour. What can I do?

  Hi Alfredlee,

  If the window is still blocked on the installation of update page, you can restart the computer, choose start normally and check what is happening.

  Step 1:

  If you are not able to boot normally to the desktop, you can consult the following link and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Step 2: When you're able to start normally, check the history of update to discover updates failed by following the link:

  See the Windows updates are installed

  Step 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• "Windows Setup cannot continue because a required driver could not be installed" while improving to 64-bit

  I'm trying to install windows 7 64 on a 32-bit with the custom installation option. All is well until that right at the end of the installation it gives me this error "Windows Setup cannot continue because a required driver could not be installed. I tried this several times but the same results. I used the windows Upgrade Advisor to see if my computer is compatible and it is no problem.

  Error image: http://imgur.com/lOVj6eX

  Restore the previous installation of Windows and do the following:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  In addition, run the Windows 7 Upgrade Advisor, it will scan your system and provide a report telling you if your PC can run Windows 7, and if there is no compatibility problems with your hardware or programs.

• So, how can I knowif and Windows Update has installed correctly. Because my computer closed connection or and I have to restart.

  Theres times that I am on my computer and I lose the connection and theres times I'm on facebook or a game. And I try to go up and down.  and stop it stops in the middle of a game or facebook. Sometimes it I see the line over and over again.

  Hi Jo AnnHerrera,.

  What browser do you use to play games?

  You can visit Windows update history to check the recently installed updates, failed.

  Check the update history to see what updates have been installed. Visit the below mentioned link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  If you use Internet Explorer to play games, refer to the suggestions from this link.

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

  I hope this helps.

• How to control the Windows updates are installed on the Windows Surface of RT

  I recently had to perform a refresh to solve the problem with desktop on the desktop icons that appear as spaces. After the update, I had to reinstall the update for Office 2013. When I went to Windows Update to do this, I found it with a group of 9 other updates, these 9 were all marked as ready for download and installation, Office 2013 update is not checked. I disabled the office 2013 update and not the other 9 updates, thinking that I could make those after I had Office installed upgrading so I would like to know if my taskbar icon problem has been resolved. At the bottom of the screen even when the Office update was the only update checked I chose to install updates. The Surface actually installed all updates, not only the update of Office.

  Is there a way to control which Windows updates are installed in fact at some point? Unchecking them made no difference.

  Hello

  Welcome to the Microsoft community!

  I understand that you are facing problems while installing Windows updates and want to know if there is a way to control which Windows updates are installed in fact at some point. I'm here to help you.

  I suggest to refer to the following article and perform the steps mentioned there.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-8/troubleshoot-problems-installing-updates

  Automatic update of Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Windows Small Business Server 2011 - "windows setup cannot continue because a required driver could not be installed.

  Hello

  I try to install windows server enterprise on my hp proliant gen 8. I used smart supply and that everything was working fine, when switching to the windows installation it gets to 99% then comes up with the error:

  Windows Setup cannot continue because a required driver could not be installed

  I was wondering what I can do to solve this problem, I have tried several times without success. Thank you for your time.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• No windows update will install on my computer.

  No windows update will install on my computer. Tried to remove and disable the Antivirus software, but I can not install any of them. When I downloaded and tried to install Service Pack 2 it returned this error "E_UNEXPECTED 0x8000ffff".

  Any thoughts?

  Hi Aaron,

  There are several resolutions by Microsoft engineers, described in detail in another thread on this forum: http://social.answers.microsoft.com/Forums/en/vistawu/thread/ecab6071-9b1a-465b-a451-06cd1c24a671.  One of these recommendations should solve your problem.

  Barbara

• Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

  I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

  Alan McC
  Do you have other accounts of users on this PC?  If you install this update from the main account?

  You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
  If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 800b0100 on update for windows mail__update fails continually - tool is system strengthened

  800 b 0100 on update for windows mail
  Update continually fails - can find system uptime tool

  http://support.Microsoft.com/kb/956702

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Windows Update KB2729453 install fails.

  Windows Update lists an important update KB2729453. After many attempts to install this update, I get error code 800705B 9 and the update fails.  How can I solve this problem?

  Hello

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description provided, it seems that you are having problems with the updates of Microsoft error code 800705 B 9.

  Method 1: download and install the update manually and check.

  http://www.Microsoft.com.nsatc.NET/downloads/en/details.aspx?FamilyId=6d742523-5f51-4db7-B05F-a9055b36b090

  Method 2: Perform the steps in the link and check.

  The problems with the installation of updates (Windows Vista)

  Answer to us if you have problems with Windows Update or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Windows updates always installed after the return to a previous restore point?

  A restore point to bring victory 7professional. What will happen with the windows updates that came after the restore point?  Clicking on updates windows just always looking for updates, nothing happens. Updates are received before the restore point still installed?

  Windows update itself creates one in order to make them reversible. To resolve the issue, see updated:

  Windows 7 update problems? First read this.

  Best regards, VZ

• Missing files on Windows Server 2008 after Windows Update being run-

  When I updated Windows Server 2008 via windows update, Server Manager no longer works. Miss me the following files:

  Policy.1.2.Microsoft.Interop.Security.azRoles.dll,

  System.Web.dll,

  System.Transactions.dll,

  System.EnterpriseServices.dll,

  System.EnterpriseServices.Wrapper.dll,

  System.Data.dll,

  System.Data.OracleClient.dll, srmlib.dll.

  Where can I find these files?

  The files are not on the DVD in Windows Server?

  Hello

  Your question is more suited to Windows Server in the TechNet forums. Please post your queries in TechNet forums http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

  I hope this helps.