Windows Update ran during the night, display is skewed

Similar Questions

• How to run windows (vista, 7), during the night, or during any period of time and do not have to worry it restart itself.

  Windows Update will restart when the changes are applied.  I understand why.  However, when I do not use windows, which is relatively rare, and the specific task, I often run long processes.  Windows will reboot the machine by force regardless of what I'm doing at the time.  I guess if you are electronic control or Watch youtube, its not that big of a deal, but when it stops at Midway for a night process, its quite frustrating.

  I had turned off the windows update service, so I guess that takes care of things, or is there another process that verifies that the windows update is running and restarts it?  Thoughts?  Even if restarting is intentional, the fact that a modern operating system will turn off when it receives a message from the mother ship is quite disturbing (beat tone comes from the fact that I'm a nerd of linux.  Sorry).

  Hello

  Check in scheduled tasks and also like antivirus programs that can update themselves
  and sometimes require a restart.

  Learn how to create a scheduled task leads to the understanding of those that have been created.

  How create a task in Vista Task Scheduler (apply as well to Win 7)
  http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

  =============================

  If something stops Windows:

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Update crashes during the installation of update

  I was recently asked to restart my laptop (under Vista Home Premium) because Windows downloaded updates. I cut and updates began to install. The computer is now fixed as "Installing update 4 of 9» It has been more than an hour on the update 4 with the cursor turns but no progress.

  Any help would be greatly appreciated.

  Hi Charles1973a,

  1. what update has recently been installed on the computer?

  2. you receive an error message?

  3. do you have a security software on the computer?

   

  First, restart the computer and try to install the update one by one.

  See the Microsoft article below as well as try the steps mentioned so that you cannot start Windows after you restart the computer, check if it helps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows update fails during the installation of KB950762

  Info by mistake the complete log of events.

  Event type: error
  Event source: Windows Update Agent
  Event category: Installation
  Event ID: 20
  Date: 12/05/2009
  Time: 13:54:01
  User: n/a
  Computer: VIDEO1
  Description:
  Installation failure: Windows failed to install the following update with error 0 x 80070003: Security Update for Windows XP (KB950762).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
  Data:
  0000: 57 69 6 33 32 48 52 65 Win32HRe
  0008: 73 75 74 30 78 38 3d sult 6 c = 0 x 8
  0010: 30 30 37 30 30 30 33 20 0070003
  0018: 55 70 64 61 74 65 49 44 UpdateID
  0020: 7 b 32 37 38 42 42 36 = {278BB6 3d
  0028:36 43 43 45 35 34 2D 6 C-CE54 2D.
  0030: 34 30 46 42 2D 41 35 41 40FB-A5A
  0038: 32 41 45 35 35 38 30 2 - AE5580 2D
  {0040: 34 43 33 39 31 37 7 20 4 3917 d}
  0048: 52 65 76 69 73 69 6f 6th revision
  0050: 4e 75 6 d 62 65 72 3d 31 number = 1
  0058: 30 36 20 00 06.

  Offers in windowsupdate.log:

  Report REPORT EVENT: {ABF68B62-29C6-494A-8574-3C613C2A5F72} 2009-12-05 13:53:55:406 - 0500 1 182 101 {278BB66C-CE54-40FB-A5A2-AE55804C3917} 106 80070003 MicrosoftUpdate error content install Installation error: Windows failed to install the following update with error 0 x 80070003: Security Update for Windows XP (KB950762).
  2009-12-05 13:54:01:765 1168 c80 to THE > # RETURN # to THE: research updates [CallId = {2B963804-32BB-4E9B-9F78-8D880127D4B8}]
  2009-12-05 13:54:01:765 1168 c80 at # 1 detected updates
  2009-12-05 13:54:01:765 1168 c80 to THE #.
  2009-12-05 13:54:01:765 1168 c80 to # END # in THE: research updates [CallId = {2B963804-32BB-4E9B-9F78-8D880127D4B8}]
  2009-12-05 13:54:01:765 1168 c80 to THE #.
  2009-12-05 13:54:01:765 1168 c80 to THE present notification is disabled.

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/956705
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• In Windows Vista Home Basic automatic updates, anti virus updates and scans, etc. are not made during the night while the computer is in sleep.

  Using Microsoft® Windows Vista Home Basic Version 6.0.6001 Service Pack 1 Build 6001, I have my computer set up to install updates automatic update and scan with my AVG antivirus 8.5 from one day to the next, while the computer is in sleep. In the morning, when I wake up the computer it alerts me that there are updates available, and I have to click the balloon to install the updates. Meanwhile my anti virus is update solange wake up also. Both are supposed to occur automatically during the night. Shouldn't these scheduled etc. updates works even if the computer is asleep?

  Hi daglo1963,

  Thanks for posting on the Forum of responses of Vista.

  When Vista is in "standby", like updating the activity is suspended.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to run Windows Update I have the 'Internet Exporer cannot display the webpage'. How can I fix it? I have Windows XP

  When I try to run Windows Update I have the 'Internet Exporer cannot display the webpage'.  How can I fix it?  I have Windows XP

  Thanks for the help.  Discovered that my security on the tools setting was set to medium-high heat.  Passed to way according to the instructions of the active-x and now able to access Windows updates.

• Windows 8 crashed during the last update, now wants to save and may not do.

  Windows 8 crashed during the last update. Stuck at 30% for more than 4 hours before I finally pressed the power button to restart the system. Windows 8 Pro with Media Center now says system build 9200 at the bottom right of the screen.

  Whenever I try to activate Windows 8, it cannot connect. When you use the command prompt Windows + R and slui 3 with my purchased serial number I get Code 0 x 80070424. Description: The specified service does not exist as an installed service.

  Hello

  This error can appear if your firewall settings prevent Windows to complete the online activation process. To resolve this problem, you can activate Windows by phone instead.

  1. Enter in the right edge of the screen and then click on Search.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)
  2. Type SLUI 04 in the search box, type or click on applicationsand then tap or click SLUI 04.
  3. Follow the instructions on the screen.

  Hope this helps

• My laptop loses its STARTUP information after it was closed during the night

  original title: STUMPER! My laptop loses its STARTUP information after it was closed during the night?

  I have a problem very intrigueing that I can't understand. I can do a clean install of Vista Ultimate(32 or 64 bit), on my gateway M285 - E Tablet PC. Once it's done and I did not yet updates, if I stop the system at night, I wake up and you try to boot the system and get a blue screen (which finally tells me that my "disk.sys" file is missing. I tried plugging it down in increments to see when this file, in fact, is lost. I stopped for about 1 1/2 hours and it will start fine, but during the night, it won't.

  Then I tried a fresh install and did all the updates available, same thing. I tried to start a "memory test and everything is fine." I even did the memory more intense test (which takes forever, by the way... lol). I also did "chkdsk", as well as all viruses and malware, etc. tests with Norton first Edition.

  I got to the point where I now have 3 separate "disk images" that I created to save time in my software I want to use this system of loading. We're just a clean install, that no update, other clean install available updates. and the last with a clean install with all my software MS Office, Adobe Creative Suite and Autodesk Entertainment and all of their updates.

  I did this for if I'll actually somehow solve this problem I can easily use the "disk image" I want... No...

  Oh yes, I also all my drivers up to date etc.

  Any help on this issue would be greatly appreciated.

  EDIT:

  Another problem related to this situation, it's the hard drive becomes undetectable, so I have to use a software such as Ubunta starting vehicle, which has its own operating system, so I can actually format my hard drive to start the installation process. (otherwise my Vista installation won the same recognize I have a hard drive, not to mention operating system to try to resolve, such as startup repair, System Restore, etc.)

  I finally figured it... xD is a hard drive diver who has been desgned for WinXP and for some reason any were never changed during the installation of Vista on this system or automatic updates.

  It was actually the IDE ATA/ATAPI controllers, specifically the Intel SATA AHCI Controller. I used "Driver Whiz/Detective", which would install most drivers via a base file system are integrated.

  The controller AHCI SATA Intel(r) has not, it only downloaded a .zip file that contains the following files:

  IaStor.sys
  iaAHCI.cat
  iaAHCI.inf

  These were to actually be manually installed. "Even if I had downloaded and extracted the files, when I tried to update the driver"Intel SATA AHCI controller"via Device Manager" through the command of newer driver search. It does not always detect it them, stating that I already had the best and latest drivers already installed.

  Then, for some reason that just kept on bothering me, because "Driver Whiz/Detective kept indicating that it was the best version of the driver for my system.

  So, I finally tried to update the drivers manually by specifying exactly where these files are located on my system. Then he finally recognized them and installed them.

  According to me, given that this system is an older model 'Gateway M285-E Tablet PC', even if it is Vista compatible, he has always maintained the operating system higher available for WinXP, through any auto detect in the BIOS. Even in the settings of the BIOS OS I tried assigning 'Other', because the only other options were Win95, Win98, WinMe, Win2000 and WinXP.

  So having not the 'Intel(r) SATA AHCI controller"recognizing a Vista OS after be closed for a period of time, it would try to load a Windows XP operating system, and have failed to do. Strange, but is the only explanation I can offer for her.

  Thanks for the help,

  Wayne

• Screen saver does not stay on during the night

  I have problems with my computer screen saver does not stay on during the night.  In addition, we noticed that the computer must be restarted during the night. Instead of the screen saver up and running in the morning, the computer is the login screen.  Our computer is turned on all night and not located to get to sleep.  Ideas or settings that I need to check?

  Hello William,.

  Thank you for the update.

  You can try to follow the following suggestions to solve the problem.

  Method 1: I suggest you perform the clean boot and check if the problem persists because, put your boot system allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform the clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting ' to reset the computer to start as usual after a repair.

  Method 2: I also suggest you to remove the schema of eating plan and create your own plan from the link and check.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  See also:

  Power plans: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/power-plans-frequently-asked-questions

  I hope this helps. Otherwise, please free to write us again and we will be happy to help you.

  Thank you

• HP Envy 15 t-j1000: HP Envy 15 t-j1000 Select Edition died during the night?

  I tried to start up my HP Envy 15t - j1000 select edition yesterday morning and I get no response what so ever. At first I thought I had left it on the exhaustion of the battery during the night. However, after a lot of troubleshooting (remove the battery and you try to start on the whole, hard reset, try another AC charger, removing RAM Modules and other components) I still can't you it to Sunrise power. The power led next door where my adapter plugs on it used to light either. It's as if the machine of the entry is completely dead, has no sense as long as its been runing perfectly without any problems.

  In addition, it has beats audio, but no button beats on the chassis (as far as I can tell) because I know it's a problem reported causing some laptops with her boot.

  Help, please!

  Hi @DrexLock,

  Thank you for your update.

  I understand you have changed the power button Board and the problem persists.

  The led indicates the power is getting to the laptop. After replacing the power button you know power going to the motherboard, but it seems to stop there.

  The next step would be to replace the motherboard.  Because they tend to be expensive, you can do a price comparison to see if the replacement of the motherboard, or the purchase of a new laptop is the best option for you.

  Good luck!

• The battery is completely discharged during the night: 100-0%

  Apple has done with the 9.3.1 update my broken ipad.
  The battery is completely discharged during the night: 100-0%
  What should I do?
  translated with Google *.

  THX

  Mimatete

  Find out what applications are running in the background and delete the unnecessary ones.  Location service is such an evacuation.

• Windows Update cannot check the updates because of the error code 80070002.

  Hi, I have a 64-bit Windows Vista, Microsoft Service Pack 1.

  My Windows Update stops errors whenever I have trying to update. This has happened for a while now, maybe 4-5 months? However, since there is no reason that I needed to update, I just let go.

  Then I realized that because of this error, my iTunes won't work; during installation, there is an error with the same numbers: 80070002. I really need to use iTunes, and it won't work.

  I checked the system for errors and renamed, but it has not fixed no problem.

  Please, how can I solve this problem?

  Hi xgbearfsho,

  If you receive the error Windows Update 80070002 of updates, you must remove the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service and then try to check for Windows updates again.

  Windows Update Error 80070002

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  If the previous step fails, then I suggest that you install service pack 2 for Windows vista on the computer and check if this solves the problem of update.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Home premium install the update. When I reboot the update tries to install, but fails. I get the message "failure of windows update Setup, reverse the change.

  I tried to copy the CBS.log to a folder, then opening the files to search for an error code. I couldn't find any error code. These files are large I can remember something small.

  Try this first: -.

  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  If no joy, then

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
  3. find an update for Windows that has failed to install, and then double-click the update to view more information.
  Updates that have failed to install will display failed under status, next to the name of update.
  4. in the Windows Update dialog box, next to the details of the error, review the error code for the update has failed.
  5. follow the links in the dialog box of Windows Update as more information or help and Support to try to resolve the problem or post back with more information on what the error code can be.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

  When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. It can indeed not necessary it and
  be able to make a right click on it and HIDE. Let us know what the update is so we can help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot connect to internet after Windows update. With the help of windows 7 on a brand new computer

  Just got a new laptop last week... The internet worked right out of the box... Now last night I let windows do a big update, and now my internet does not work...  It says something about "connects to the DNS servers.

  So I did a system restore to an earlier time, and the internet works fine...

  which ____ should I do?

  Hi 31aboy,
   
  Welcome to the Microsoft Answers community.
   
  Try to install the update to windows in clean boot mode.

  To enter the mode of clean boot on your computer, follow these steps.
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. now run windows update.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
   
  If you are facing the same problem even after installing the update in clean boot mode, then check the update in windows update history and send me the update name.
   
  Steps to view the windows update history:
   
  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
  2. in the left pane, click view update history.
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.